How to dump guest user database from 4402 to 5508

Hi Everyone,
Currently all our guest user accounts are created on a 4402WLC that is running on code 4.2.61.0. This WLC will be replaced by a 5508WLC that is running on 7.0.116.0. Is there a way to export all the guest user accounts and password from 4402 and import them to 5508? I can only get account name from "show running-config" and password is not showing there.
Thank you.
Robert

Hi Patrick,
I'm pretty sure I can only see "netuser lifetime xx" and "netuser wlan-id xx". I can't see "netuser add xx". I've checked both lab WLC4402 and production WLC4402. They give me the same results. The following is my WLC's info.
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 4.2.61.0
RTOS Version..................................... 4.2.61.0
Bootloader Version............................... 4.1.171.0
Build Type....................................... DATA + WPS
System Name...................................... c1lab-wlc4402-1
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3
IP Address....................................... 42.116.24.172
System Up Time................................... 270 days 23 hrs 49 mins 51 secs
Configured Country............................... US - United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +45 C
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
--More-- or (q)uit
Number of WLANs.................................. 10
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 13
Burned-in MAC Address............................ 00:19:AA:72:3C:A0
Crypto Accelerator 1............................. Absent
Crypto Accelerator 2............................. Absent
Power Supply 1................................... Absent
Power Supply 2................................... Present, OK
(Cisco Controller) >

Similar Messages

How do you delete a guest user account from the users&groups pane?

could anyone help with giving a tip on how to delete a guest user account from the users&groups pane in os-x 10.7 ? when I unlock account the delete or minus button is inactive. Thankyou

aha, by disabling the find my mac checkbox in icloud seems to work. tusen takk previous threaders!!!!!!!!!!

How to restrict the user(Schema) from deleting the data from a table

Hi All,
I have scenario here.
I want to know how to restrict a user(Schema) from deleting the values from a table created in the same schema.
Below is the example.
I have created a table employee in abc schema which has two values.
EMPLOYEE
ABC
XYZ
In the above scenario the abc user can only fire select query on the EMPLOYEE table.
SELECT * FROM EMPLOYEE;
He should not be able to use any other DML commands on that table.
If he uses then Insufficient privileges error should be thrown.
Can anyone please help me out on this.

Hi,
kumar0828 wrote:
Hi Frank,
Thanks for the reply.
Can you please elaborate on how to add policies for a table for just firing a select DML statement on table.See the SQL Packages and Types manual first. It has examples. You can also search the web for examples. This is sometimes called "Virtual Private Database" or VPD.
If you have problems, post a specific question here. Include CREATE TABLE and INSERT statements to create a table as it exists before the policies go into effect, the PL/SQL code to create the policies, and additonal DML statements that will be affected by the policies. Show what the table should contain after each of those DML statements.
Always say which version of Oracle you're using. Confirm that you have Enterprise Edition.
See the forum FAQ {message:id=9360002}
The basic idea behind row-level security is that it generates a string that is automatically added to SELECT and/or DML statement WHERE clauses. For example, if user ABC is only allowed to query a table on Sunday, then you might write a function that returns the string
USER != 'ABC'
OR      TO_CHAR (SYSDATE, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') = 'SUN'So whenever any user says
SELECT *
FROM    table_x
;what actually runs is:
SELECT *
FROM    table_x
WHERE   USER != 'ABC'
OR      TO_CHAR (SYSDATE, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') = 'SUN'
;If you want to prevent any user from deleting rows, then the policy function can return just this string
0 = 1Then, if somone says
DELETE employee
;what actually gets run is
DELETE employee
WHERE   0 = 1
;No error will be raised, but no rows will be deleted.
Once again, it would be simpler, more efficient, more robust and easier to maintain if you just created the table in a different schema, and not give DELETE privileges.
Edited by: Frank Kulash on Nov 2, 2012 10:26 AM
I just saw the previous response, which makes some additional good points (e.g., a user can always TRUNCATE his own tables). ALso, if user ABC applies a security policy to the table, then user ABC can also remove the policy, so if you really want to prevent user ABC from deleting rows, no matter how hard the user tries, then you need to create the policies in a different schema. If you're creating things in a different schema, then you might as well create the table in a different schema.

How to connect to Oracle database from webdynprojava application

Hi
How to connect to Oracle database from webdynprojava application. where can we provide the code to connect to database.?
Thank You.

Hi,
You need to create Java Bean model. The bean is a typical java bean with default constructor, getter and setter. You can have additional methods for query etc. The attributes in the class will be your model node and attributes.
However you need to configure the connection and create JNDI using visual administrator before writing the code.
You can also consider writing Session EJB with oracle and using them in WD.
http://help.sap.com/saphelp_nwce10/helpdata/en/45/dcaa4f05535591e10000000a1553f7/frameset.htm
Srini

Restoring a User Database from External Backup

It has been a good 8 years since I have had to recover a user database from backup and I just really wanted a verification of what needs to be recovered.
Just recently had a user get a C00E error and the analyzer suggested restoring from backups. No problem, we run backups daily on the mail server (yes ... we use windows *sigh*) and we use Veritas Backup Exec. to run full/incremental backups.
In order to recover the user, do I just need to restore the userXXX.db located in the ofuser folder? Since it will be a couple days older, will I need to restore anything else or should that folder alone be fine?
Thanks in advance for any input.

On 11/13/2012 1:26 PM, dpenney wrote:
>
> It has been a good 8 years since I have had to recover a user database
> from backup and I just really wanted a verification of what needs to be
> recovered.
>
> Just recently had a user get a C00E error and the analyzer suggested
> restoring from backups. No problem, we run backups daily on the mail
> server (yes ... we use windows *sigh*) and we use Veritas Backup Exec.
> to run full/incremental backups.
>
> In order to recover the user, do I just need to restore the userXXX.db
> located in the ofuser folder? Since it will be a couple days older,
> will I need to restore anything else or should that folder alone be
> fine?
>
> Thanks in advance for any input.
>
>
try that first
other things like MSGxxx and OFFILES are shared...

How to retrieve guest user account backup

I have an iMac and a time capsule. A large number of pictures were loaded into I Photo in the guest account of my iMac. I cannot now find these pictures as I understand that guest accounts are wiped clean each time the guest account is lodged out from.
Given that we did not log out from the quest account for a couple of days, i am hopeful that the guest account was backed up by time capsule. I cannot find the guest account on the backed up time capsule. Does anyone have any suggestions whether TC backs up the guest account and if so, how can I locate it in TC.
Thanks very much. David

Did you have the main account logged in as well as guest at the time? Do you have TM setup in the guest account?
It is very unlikely TM backed it up. If it did simply mount the sparsebundle in finder and go through all the folders until you find the guest user account and check if there is anything there. If not sorry it was never backed up.
The only solution I can see if to use a recovery software for the camera. Whatever source of the photos was.. stop using the memory card in that camera now.. use the recovery software as the files will be there until overwritten for the next lot of pictures.
Pondini has all the info for recovery of files from TM.
See Q15 here. http://pondini.org/TM/FAQ.html
There is a section for iphoto.. but IMHO it won't be backed up.

How to disable Guest User Login

All of a sudden I have a "Guest User Account" on my login screen. I never enabled it, and it wasn't there before. I checked my Users preferences and it clearly shows the Guest User Account is disabled (nothing checked). Any ideas how to remove it from my login screen? Thanks.

Larry McJunkin wrote:
No, that is not enabled. It is for my iPhone but not my MacBook. Any other ideas?
See: http://osxdaily.com/2011/10/13/disable-guest-user-account-mac-os-x-10-7-2-login- screen/

How to activate guest user

hi guys
can anyone tel how to activate guest and Anonymous Users..
thanks
regards
kamal....

Hi ,
please find some of the information for the Guest USer.
http://help.sap.com/saphelp_nw04/helpdata/en/c2/f4e73ee7442e5ae10000000a114084/frameset.htm
In case of Add-In installation, these users are automatically created on the ABAP side in client 001. If you want to use another client, you have to create these users with their roles in this other client.
User Role
SAPJSF SAP_BC_JSF_COMMUNICATION
J2EE_ADMIN SAP_J2EE_ADMIN
J2EE_GUEST SAP_J2EE_GUEST
User SAPJSF is used for JCo (RFC) communication from Java to ABAP.
User J2EE_ADMIN is the J2EE and Portal Administrator user.
User J2EE_GUEST is used for anonymous logon.
Users with Role SAP_J2EE_ADMIN are automatically mapped to Portal Group Administrators.
thanks
Users with Role SAP_J2EE_GUEST are automatically mapped to Portal Group Guests.
The passwords of these users are defined by the customer during installation.

How to delete last user session from backend SQL query?

Sometimes user session gets closed between some work by any reason.
When next time that user logs to P6, he gets some error or particular functionaly dosen't work for that user or system hangs.
In that case if i decided to clear last session history of that user from database, how to write SQL query?
I don't want to delete all user sessions from table USESSION and USESSAUD, i simply want to delete last user session of particular user (E.g XYZ).

I am quoting this from MOS Doc Id "Why would multiple session records be present in the User Sessions screen in P6 Web, and why might some of them have different IP addresses? (Doc ID 1600172.1)"
Multiple sessions show up for users since different sections of P6 Web have their own sessions associated with them. If a user is authorized to use multiple areas of the software they will have multiple sessions each time they log in. Additionally, if users are closing their browsers before logging out of P6 Web Access you might see some past sessions still appearing in the list. These will eventually be cleared out by background jobs, however you can also reset the sessions in the software by clicking the "Reset User" link (Administer > User Sessions > Manage User Sessions), or by choosing the "Reset All Users" link (Administer > User Sessions > Manage User Sessions) to do this for all past sessions.
Multiple IP addresses for sessions can happen when a user logs in from different machines. For example, a person may login at their desk, but then go to a colleagues workstation to discuss a project, and log in from there. Doing so will leave them with multiple IP addresses in the session records.
Hope this helps
Regards,
Sachin Gupta

Guest User - where from?

Until today only myself and my partner have had our login details appear on the login screen. All of a sudden a Guest User option has appeared. Firstly how can this have happened if I didn't change preferences ('tis a mystery), and secondly how do I remove it from the login screen? It's showing as disabled but I'd prefer not to have it displayed on the login screen.
Many thanks in advance for any suggestions.

It's a security feature of Lion. If someone steals your computer & uses that account, all they'll get is internet access, which hopefully will enable you to locate your Mac. They will have no access to any files on your computer. Do not delete the Guest account.

How to copy a user account from one Mac to another

If I have a main user (admin) account on one Mac, and want to copy its Home Folder over to another Mac that already has user accounts on it, what is the best way to do it?
For example, if I boot the source Mac in Target Disk Mode then connect it to the other Mac, can I just drag and drop from its Users folder into the Users folder on the other Mac? And would that then appear in SysPref/Accounts, complete with names and passwords etc, or is it not that simple?
(Actually, I just checked by launching Migration Assistant, and it seems to indicate I can use it to copy User Accounts from a different Mac - is this all I need? How would I connect the two Macs for this to work?)

Slightly confusing, that article - it talks about using Migration Assistant in Lion or Mountain Lion, but in my case both computers have used Snow Leopard. Does it still apply?
(One other observation - don't you find it confusing the way Apple defines "Target Disk Mode"? It's pretty much always the case that a computer booted in this way becomes the Source computer, while the Target computer is the one it's connected to!!)

How Can I Copy an database from one server to another ?

Hi All,
I need to copy an existing database from one server to another server. I want to maintain all the settings from the source database.
I´m not used to Oracle database and i´d be glad for any help.
How can I do this ? Do I need to backup and restore in the other server ? Do I need to copy files from one server to another ?
Any help will be really appreciated.
Carlos.

I think a simpler approach, other than using RMAN, is to do a database export from the source and then import them into the target database. But you will need to do some ground work on the target, i.e, create database, tablespaces, and schemas (with their name the same as those in the source database.)

How to disable guest user account on iMAC

I upgraded to Lion and now I have a guest user account on the log in screen. I want to disable this account. How do I get rid of it?

System Preferences > Users & Groups > Guest User (you may need to authenticate) and uncheck "Allow guests to log in to this computer".

How to reset guest user

Hi,
I'm new to lion. I tried to manipulate the guest user account so it would function as a guest user (deleting all the private stuff after log out) but keeping my preferences like dock, desktop, grid settings, ...
I used this link: http://www.michaelsmac.com/modules.php?file=article&name=News&sid=394
but something went wrong. (Later I discovered this was posted prior to Lion so this could be the problem)
The result is that on start up of the user account it also shows my terminal open and the last webpage I visited (the link above).
Quiting these and log out/ log in again does not resolve this problem.
I did the backup like sugested in the link but I'm not able to use it
I can see it in system/library/
Anyone can help me on how to recover the original guest settings without having to reinstall the complete OSX ?
Many thanks !

Why can't you use the "backup" as suggested?
The second and third lines of the recovery hint will likely need sudo appended in front of the commands.

How to delete Guest User Account

I just got my Mac book Pro and I'm new to Mac. I created a Guest User Account and now I want to delete it. But the - (minus) option is grey out. How can I delete the Guest User Account? I have two accounts listed right now. The Admin and the Guest Account. Thanks for your help.
p.s. I just found out I couldn't even open the folders under the Guest directory! How come? I am the Admin and should be able to do that. What did I do wrong? Help!!!

I should also say that sometime in the future you might have a problem with something, and one of the first things you should test is, do you have the same problem in another account, so having a Guest Account is a good thing.
You just log in as Guest and test to see if you have the same problem. So it might be a good idea to leave it active, for it takes up very little space. I always have more than one Account, and this new Guest Account sounds good to me, I like the idea that everything is deleted after log off.

How to dump guest user database from 4402 to 5508

Similar Messages

Maybe you are looking for