How to edit data while loading data from W/O to Standard DSO?

Hello,
I am loading data from W/O to Standard DSO, during activation it got error out due to SID failure error for one infoobject(error is due to lowercase letter).But i can't change the infoobject setting and transformation.
Is there any way to edit the data(either in W/O DSO or in new data of Standard DSO)?
Thanks and regards,
Himanshu.

HI,
Please check what is setting there in the transaction RSKC if it is set as ALL_CAPITAL then you must atleast chage the charecter setting, write a command in transformation, load to PSA and modify (Not applicable for BI7), Remove the setting in RSKC.(Not suggested).
Cheers
Vikram

Similar Messages

How to edit data from a "View Table"?

I am importing data from a "table view" where in sql it joins several tables into one view. When I passed it in using the template it doesnt have the "Edit command column" like other direct link tables. Is there anyway I could make a view table editable? Can I manually try to do it or I have to edit the individual ables? thanks

oh sorry about that.The "template" I mean in HTMLDB when I start building a new application I used "Based on existing tables" method and with single tables it generates everything fine with search fields and edit column to the left. I have a table view that combines about 4 tables together and I used the same template (Based on existing tables) and it has the search and create but it doesnt have the "edit" column on the left. Is there a way I can edit the view table's information so that the other tables that the view combines will be updated/edited?
The reason is that lets say I dont know this person's ID number but I know his name. I search for his name on table A and it returns some general data including his ID number. Instead of going to another Table B with the person's ID number and edit that table I really want to see the information just from one search (Table A)- if a global search can be implemented that would be great too. Thanks Sergio.

How to edit data from an IDOC with errors and reprocess it

Hi,
We are working with SAP XI for communicate with an external systems by files (external) to IDOCS (SAP R/3).
Sometimes we need to edit the data from an inbound IDOC, because the external system generates wrong information and that can't be processed directly.
We had seen posts like:
But we wanna to do it with no ABAP editor.
¿Can we change the data from the IDOC in other way (transaction) and reprocess it?
We tried with /WE05, pushing EDIT button, but can't edit the data from the IDOC.
Thanks in advance for your help
Regards,
Federico Martin

Keep Looking at forums i founded:
change idoc data
To change the Inbound IDoc,
1)Go to WE05/WE02, enter the Inbound IDoc number and Execute.
2)Double Click on the segment (Page Icon) where you want to change the Data.
3)In the Screen 'Display data record for IDoc' , Go to menu 'Data record' and click on 'Display - > Change'. Then it display a popup information 'Changes to the IDoc are written to the database' , then press enter .
To Process the Edited Inbound Idoc , execute the program 'RBDAGAIE' in SE38 and enter the IDoc number.
Thanks
Sekhar
AND
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Also if you have something to say about it will be appreciated
thanks

How to store ,retreive and edit data from an xml file

I am new to XML. I am creating a phone book in JSP with backend as an XML file.How can I store retrieve and edit datas from a jsp file.
Please provide me with examples.I dont want to use bean.
Please provide examples

You will have to do some leg-work yourself. You will probably want to use DOM to parse and manipulate your XML data. Xerces (xml.apache.org) is a good open source parser. There are extensive examples on their site.
- Saish

How to move data from a staging table to three entity tables #2

Environment: SQL Server 2008 R2
I have a few questions:
How would I prevent duplicate records, when/ IF SSIS is executed many times?
How would I know that all huge volume of data being loaded in the entity tables?
In reference to "how to move data from a staging table to three entity tables ", since I am loading large volume of data, while using lookup transformation:
which of the merge components is best suited.
How to configure merge component correctly. (screen shot is preferred)
Please refer to the following link
http://social.msdn.microsoft.com/Forums/en-US/5f2128c8-3ddd-4455-9076-05fa1902a62a/how-to-move-data-from-a-staging-table-to-three-entity-tables?forum=sqlintegrationservices

You can use RowCount transformation in the path where you want to capture record details. Then inside rowcount transformation pass a integer variable to get count value inside
the event handler can be configured as below
Inside Execute SQL task add INSERT statement to add rowcount to your audit table
Can you also show me how to Check against destination table using key columns inside a lookup task and insert only non
matched records (No Match output)
This is explained clearly in below link which Arthur posted
http://www.sqlis.com/sqlis/post/Get-all-from-Table-A-that-isnt-in-Table-B.aspx
For large data I would prefer doing this in T-SQL. So what you could do is dump data to staging table and then apply
T-SQL MERGE between tables (or even a combination of INSERT/UPDATE statements)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to pass data from one internal session to another

Hi SAP Experts,
How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
Please tel me urgently
Thank you
Basu

Memory Structures of an ABAP Program
In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
The following diagram shows how an application program accesses the different areas within shared memory:
In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
Data Clusters in ABAP Memory
You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
From an executable program (report) to another executable program called using SUBMIT.
From a transaction to an executable program (report).
Between dialog modules.
From a program to a function module.
and so on.
The contents of the memory are released when you leave the transaction.
To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
Saving Data Objects in Memory
To read data objects from memory, use the statement IMPORT FROM MEMORY.
Reading Data Objects from Memory
To delete data clusters from memory, use the statement FREE MEMORY.
Deleting Data Clusters from Memory
please read this which provide more idea about memory
Message was edited by:
sunil kumar

How to reinstall data from hp backup discs

System crashed. Can't seem to figure out how to reinstall data from backup discs.

Greetings,
If you place the first disc into your DVD-ROM and start your computer, on the HP screen press Escape until you get a menu. Select the Boot menu, choose CD/DVD-ROM, and then enter. Press any key when it tells you to press any key to boot off CD-ROM. This will load the recovery software.
*****WARNING***** you will lose all files and programs that you have installed and placed on your computer since you purchased the unit.
. Once this has been completed, you will see a HP Recovery screen. Select System Recovery, then select next and follow the prompts. There should be a section allowing you to backup your data onto a flash drive. Now I recommend if there is any critical data on your disk that you verify the backup prior to initiating the actual recovery.
This will set your computer up as the day that you first purchased it. All data and programs installed on the computer since the day you purchased it will be gone.
During this process make sure you are on your AC adapter and you have no extra devices plugged in such as printers, external hard disks, and flash drives while the actual recovery is taking place. You can use your flash drive during the backup process portion.
Good Luck
Brent
***** Please select issue confirmed on the post of the person whom recommended the solution that fixed your issue. This way future board members can quickly access the solution****

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

How to export data from a Oracle table to a delimited file?

I know how to load delimited file into a table, but how to export
data from a Oracle table to a delimited file?
Thanks in advance.

Try looking at this link, it's long but there's three different solutions discussed in it. If you look at Barbara Boehmer's
solution in her posts in the link below you'll see that she's addressed your concerns with spool files.
Re: utl_smtp and triggers

How to exctract data from a report to use it in a process

Hi! I would like to know how to exctract data from a report to use it in a process. Let's say that I have a report which have following fields: id_person, name_person. And then, I want to make a process which introduce the id_person (from report) into an associative tabel. How can I reffer to the fields from my report?
I was thinking about something like that( this should be the code from my process)
insert into associative_table(id_person)
values(id_person) or
insert into associative_table(id_person)
values(Report_name.id_person) but it doesn't work....
Thank you very much.

Another option, use collections.
Create an on load process that loads all the rows you would have in your report into a collection:
begin
HTMLDB_COLLECTION.CREATE_OR_TRUNCATE_COLLECTION(
p_collection_name => 'ASSIGNED_CALENDAR_CONTACTS' );
for x in (SELECT CONTACT_ID, CONTACT_FNAME, CONTACT_LNAME
FROM CONTACT
WHERE InStr( pkg_CalendarMgr.f_FetchContactIDsForDay( TO_DATE( :P3_CALENDAR_DT, 'YYYYMMDD' ), 'OF' ), CONTACT_ID ) > 0 )
loop
htmldb_collection.add_member(p_collection_name => 'ASSIGNED_CALENDAR_CONTACTS',
p_c001 => x.CONTACT_ID,
p_c002 => x.CONTACT_FNAME,
p_c003 => x.CONTACT_LNAME);
end loop;
end;
Then, instead of your report selecting from the table, have it select from the collection, this way your display will match what's in the collection:
SELECT c001, c002 || Chr(32) || c003 CONTACT_NAME, 'Remove' remove
FROM htmldb_collections
WHERE collection_name = 'ASSIGNED_CALENDAR_CONTACTS'
ORDER BY c003, c002
Then you can have a button on the form that steps through the collection, one element at a time and does whatever you want it to.

How to move data from 2 internal table to 1 internal table

Can any body send me code that how to move data from 2 internal table into one internal table.
Moderator message : Read ABAP documentation. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 11:45 AM

Hi Mohdarif92;
I don't know your full needs. But general method should be as below code.
Please check exam below code.
Best regards.
data : begin of gt_result.
            ... like mkpf-...
            ... like mkpf-...
            ... like mseg-...
            ... like mseg-...
          end of gt_result
select *
into table gt_mkpf
from mkpf where ...
select *
into table mseg
from mseg where ...
loop at gt_mkpf.
     loop at gt_mseg where ... = mkpf-...
        move-corresponding gt_mkpf to gt_result.
        move-corresponding gt_mseg to gt_result.
        append gt_result
     endloop.
endloop.

How to Pull data from sap r/3 tables to oracle tables

how to fetch data from sap r/3 tables & data pulled to oracle table .
GIVE THE APPROPRITE ANSWER FOR THIS.
THANKS IN ADVANCE.
If it is useful for me , i am giving point.
regards ,
Navita
Edited by: NAVITA YADAV on Mar 7, 2008 2:07 PM
Edited by: NAVITA YADAV on Mar 7, 2008 2:08 PM

You need to perform some native SQL to fetch data. Before doing this connection must be exists b/w your R/3 and Oracle server.
Basis team will help you to have connection.
Check the connection name in the table DBCON.
Check the below code to handle native SQL.
SELECT SINGLE DBMS
           FROM DBCON
           INTO DBTYPE
           WHERE CON_NAME = DBS.
IF DBTYPE = 'ORA'.
    TRY.
      EXEC SQL.
        CONNECT TO :dbs
      ENDEXEC.
ERROR Handling for Native SQL *************
      IF SY-SUBRC <> 0.
        MESSAGE `Docusphere connection failed.` TYPE 'I'.
        EXIT.
      ENDIF.
EXEC SQL PERFORMING loop_output.
    OPEN C1 FOR
    SELECT UK1, UK7, uk6, uk9, uk22, uk23, uk25    "field names of Oracle table
    FROM IIS_DOCS_AP10D
    WHERE ( UK2 = 'ZFIINVOICE' OR UK2 = 'ZFIPAYREQ' )    AND
    UK19 = 'E'                                           AND
    UK20 IS NULL
ENDEXEC.
      DO.
        CLEAR W_OUTPUT.
        EXEC SQL.
          FETCH NEXT C1 into :wa1-arc_doc_id, :wa1-bukrs, :wa1-belnr, :wa1-gjahr, :wa1-wi_id, :wa1-ARCH_METHOD, :wa1-barcd.
        ENDEXEC.
enddo.
Reward points if helpful.................

How to store data from Host.vi in cRIO-9074

TejasKumar Patel
I implemented a advance Measurement and Control system using cRIO-9074
with c-Series I/O cards( NI 9217, 9411, 9264)
I have some questions about it,
(1)- Data rate from FPGA targate to host vi is too low. how can I increase
it, when I run my host VI, sometimes all temperature sensor update at
same time and sometimes one by one, can you please give me some hint, how
can I correct it, I used two FIFOs for NI-9411 digital pulses, I put all
Digital input and all analog output and input in a seperate while loop in
FPGA targate VI.
(2)- I have to write that data to analyse for further result. I tried all
possible way to write data including wite to spreadsheet.vi, write to
text.vi, Data storage.vi, Write to measurement.vi. All this VI work
efficientlywhen it run individualy, But when I connect this VI to
writedata from FPGA host VI. than it always give empty file.
I saw your post in NI discussion forum about how to write data from
Host.vi, But still I am confuse that how can I creat a protocol between
host VI and Fpga target vi. to write the data in a file. I have nearabout
38 channel to write data.
(3)- I have to measure time difference between two digital pulses, to find
a flow rate. I am using counter for it with risisng edge shot.vi, but when
i get a timestemp when there is risisng edge for the second rising edge
how can I get timestemp. Its like i have to measure time between two
pulses, I triend waveform measurement.vi to find cycle period. but it not
worked. any other was to measure it.
I am stuck in this question since from last one month. I already followed
NI-discussion forum solution but it doesnt work. I think the way I applied
is may be wrong.
Looking forward to hear from you soon.
Plese send an additional email copy to [email protected]
Thank you and Best Regards,

Thanks Joseph for your support,
1-      If I count the ticks between the pulses it always seems different ….because this method I already tried, but it does not work, like some times it shows 9099 tick and at the second pulse it shows like some more or less ticks not the same ticks every time. To complete my project, the biggest problem is the data storage.
2-      As you gives the solution in NI forum, “low level file I/O Vis such as Write to text file” FPGA target not support this VI. And mainly I want to write data from HOST.vi, because I am process those data …and I need to store it. For to figure out my result.
3-      If I use “Write to text file. VI (Sub-VI ) to FPGA.vi, it not support because it support string data and I have FIXpoint data. And can you explain me what is low level file IO, and how can I use in fpga.vi??
4-      Yes, for my project time stamp it really necessary, for data analysis.
5-      I need the time stamp to find out what was the system response at the time. As our project based on weather temperature, I need time stamp.
Waiting for your reply,
Thanks and Regards,
Patel

How to catch data from Purchase Order form, when user click CLOSE menu?

Hi,
I need do my own biz process when user click CLOSE in the Data menu to close a purchase order.
But I don't know how to get data from PO form which opened by user.
Can anybody give me some suggestions? thanks.

Clicking "Close" is menuUID 1286. (Check this by going to View->System Information, and then hovering your mouse over "Close" in the menu. The menuUID is displayed in the bottom left of the screen)
So catch the menu event, when menuUID and pVal.BeforeAction = True.
The slightly tricky thing here is that pVal for a menu event doesn't give you the form, but it will be the active form, so you can do this:
Private Sub SBO_Application_MenuEvent(pVal As SAPbouiCOM.IMenuEvent, BubbleEvent As Boolean)
     If(pVal.BeforeAction And pVal.menuUID = "1286")
         SAPbouiCOM.Form oForm = SBO_Applcation.Forms.ActiveForm
         //Now you have the form, when the user has clicked close, so process the data
         //from the form as normal
     End If
End Sub
Syntax might be wrong, I typed it up from memory and have no error checker!
Edited by: njmog1 on Feb 28, 2011 10:35 AM

How to edit data while loading data from W/O to Standard DSO?

Similar Messages

Maybe you are looking for