How to edit Init Parameters using OEM Website?
How can one edit an init parameter of a servlet runnig in Oracle 9 iAS.
I have Oracle 9iAS r2 running on a Win2K with 512 MB RAM. Everything works fine excpet editing the init parameters using OEM Website. The documentation says its possible to edit the init parameters by clicking on it. But here, the init parameters are not having hyperlinks. Please help...
Thanks for the instant reply.
If that is the case, what is the way out then?
How can the end-user (ofcourse, the 9iAS administrator at customer site) change the init parameters?
What we have suggested is to edit the web.xml in the EAR before deploying the application. Is it the only way out? Customer find it difficult to accept.
Please help.
Thanks in advance,
-Jamal
Similar Messages
-
ACLs and editing XML files using OEM
Hi,
How to edit the registered schema file using OEM?
I tried, but did not allow to edit.
What previliges do a user need to update? In my case, even the user with DBA, XDBADMIN roles can not edit the content of the schema in OEM. Is it possible?
In case of acls, there are four xml files. Are they assigned to resources or is it possible to assign them to users as well?
I mean to say is it possible that different users have diifernt access to resources?
Thanks.Hi
It is not possible to update a schema via OEM.
The only way (except via SQL) is to use an editor that supports WebDAV.
Notice that no schema evolution is supported in 9i, i.e. you should have no types or tables that depend from it.
In the ACL you can specify which user or role has access to the resource associated to it.
Chris -
How to edit ALV report using function modules
I have a ALV report , i want to edit the report
using function modules.
how can i do that...
Edited by: ms kumar on Mar 6, 2008 3:24 PMhi i had used this report with the check box,
using the fm of alvs.....
*& Report ZZZ00
REPORT ZPR_02.
TYPE-POOLS: SLIS.
TABLES:pa0002,pa0008.
data:begin of it_pa0002 occurs 0,
checkbox,
pernr like pa0002-pernr,
begda like pa0002-begda,
endda like pa0002-endda,
vorna like pa0002-vorna,
nachn like pa0002-nachn,
end of it_pa0002.
data:begin of it_pa00021 occurs 0,
pernr like pa0002-pernr,
begda like pa0002-begda,
endda like pa0002-endda,
vorna like pa0002-vorna,
nachn like pa0002-nachn,
expand TYPE xfeld value 'X',
end of it_pa00021.
data:begin of it_pa0008 occurs 0,
pernr like pa0008-pernr,
begda like pa0008-begda,
endda like pa0008-endda,
ANSAL like pa0008-ANSAL,
LGA01 like pa0008-LGA01,
BET01 LIKE PA0008-BET01,
end of it_pa0008.
DATA: IT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELD_CAT1 TYPE SLIS_T_FIELDCAT_ALV,
IT_LAYOUT1 TYPE SLIS_LAYOUT_ALV,
WA_FIELD_CAT TYPE SLIS_FIELDCAT_ALV,
WA_FIELD_CAT1 TYPE SLIS_FIELDCAT_ALV,
IT_LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS TYPE SLIS_T_EVENT,
WA_EVENTS TYPE SLIS_ALV_EVENT,
IT_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER,
wa_keyinfo TYPE slis_keyinfo_alv.
CONSTANTS:c VALUE 'X'.
SELECT-OPTIONS: S_pernr FOR pa0002-pernr.
START-OF-SELECTION.
SET PF-STATUS 'DATA' .
PERFORM GET_DATA.
PERFORM BUILD_FIELD_CAT.
PERFORM GET_EVENTS.
PERFORM DISPLAY_DATA.
*& Form get_data
text
FORM GET_DATA .
SELECT pernr
begda
endda
vorna
nachn
FROM pa0002
INTO CORRESPONDING FIELDS OF TABLE IT_pa0002
WHERE pernr IN S_pernr.
ENDFORM. " get_data
*& Form build_field_cat
text
FORM BUILD_FIELD_CAT .
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'CHECKBOX'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'Check Box'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'PERNR'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'Personnel no'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'BEGDA'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'Start date'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'ENDDA'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'End date'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'VORNA'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'First name'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'NACHN'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'Last name'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat1-tabname = 'PA0002'.
WA_FIELD_CAT1-FIELDNAME = 'PERNR'.
wa_field_cat1-ref_tabname = 'IT_PA00021'.
WA_FIELD_CAT1-REPTEXT_DDIC = 'Personnel no'.
APPEND WA_FIELD_CAT1 TO IT_FIELD_CAT1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0002'.
WA_FIELD_CAT1-FIELDNAME = 'BEGDA'.
wa_field_cat1-ref_tabname = 'IT_PA00021'.
WA_FIELD_CAT1-REPTEXT_DDIC = 'Start date'.
APPEND WA_FIELD_CAT1 TO IT_FIELD_CAT1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0002'.
WA_FIELD_CAT1-FIELDNAME = 'ENDDA'.
wa_field_cat1-ref_tabname = 'IT_PA00021'.
WA_FIELD_CAT1-REPTEXT_DDIC = 'End date'.
APPEND WA_FIELD_CAT1 TO IT_FIELD_CAT1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0002'.
WA_FIELD_CAT1-FIELDNAME = 'VORNA'.
wa_field_cat1-ref_tabname = 'IT_PA00021'.
WA_FIELD_CAT1-REPTEXT_DDIC = 'First name'.
APPEND WA_FIELD_CAT1 TO IT_FIELD_CAT1.
CLEAR WA_FIELD_CAT.
wa_field_cat1-tabname = 'PA0002'.
WA_FIELD_CAT1-FIELDNAME = 'NACHN'.
wa_field_cat1-ref_tabname = 'IT_PA00021'.
WA_FIELD_CAT1-REPTEXT_DDIC = 'Last name'.
APPEND WA_FIELD_CAT1 TO IT_FIELD_CAT1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'PERNR'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'personnelno'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'BEGDA'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'begindate'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'ENDDA'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'enddate'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'ANSAL'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'annualsalary'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'LGA01'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'wagetype'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'BET01'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'Amount'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
ENDFORM. " build_field_cat
*& Form display_data
text
FORM DISPLAY_DATA .
it_layout-box_fieldname = 'CHECKBOX'.
it_layout-EDIT = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = IT_FIELD_CAT
IS_LAYOUT = IT_LAYOUT
IT_EVENTS = IT_EVENTS
TABLES
T_OUTTAB = IT_pa0002.
ENDFORM. " display_data
*& Form get_events
text
FORM GET_EVENTS .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
IMPORTING
ET_EVENTS = IT_EVENTS .
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = SLIS_EV_TOP_OF_PAGE.
IF SY-SUBRC = 0.
WA_EVENTS-FORM = 'TOP_OF_PAGE'.
MODIFY IT_EVENTS FROM WA_EVENTS INDEX SY-TABIX.
ENDIF.
ENDFORM. " get_events
*& Form top_of_page
text
FORM TOP_OF_PAGE.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'EMPLOYEE DATA'.
APPEND WA_HEADER TO IT_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_HEADER
ENDFORM. "top_of_page
*& Form GUI_SET
FORM GUI_SET USING RT_EXTAB TYPE SLIS_T_EXTAB .
SET PF-STATUS 'DATA' .
ENDFORM. "GUI_SET
*& Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
R_SELFIELD TYPE SLIS_SELFIELD.
DATA:V_PERNR LIKE PA0002-PERNR.
CASE R_UCOMM.
WHEN 'DET'.
DATA: V_FLAG.
clear : v_flag.
LOOP AT IT_PA0002.
if it_PA0002-checkbox = 'X'.
v_flag = 'X'.
v_pernr = IT_PA0002-PERNR.
SELECT PERNR
BEGDA
ENDDA
VORNA
NACHN
FROM PA0002
INTO CORRESPONDING FIELDS OF TABLE IT_PA00021
WHERE PERNR = V_PERNR.
SORT IT_PA00021 BY PERNR.
DELETE ADJACENT DUPLICATES FROM IT_PA00021 COMPARING PERNR.
READ TABLE IT_PA00021 INDEX 1.
SELECT PERNR
BEGDA
ENDDA
ANSAL
LGA01
BET01
FROM PA0008
INTO TABLE IT_PA0008
FOR ALL ENTRIES IN IT_PA00021
WHERE PERNR = IT_PA00021-PERNR.
if not it_PA0008[] Is initial.
SORT IT_PA0008 BY PERNR.
delete adjacent duplicates from it_PA0008 comparing pernr.
READ TABLE IT_PA0008 INDEX 1.
endif.
endif.
enddo.
it_layout1-group_change_edit = c.
it_layout1-colwidth_optimize = c.
it_layout1-zebra = c.
it_layout1-detail_popup = c.
it_layout1-get_selinfos = c.
it_layout-expand_fieldname = 'EXPAND'.
wa_keyinfo-header01 = 'PERNR'.
wa_keyinfo-item01 = 'PERNR'.
IF NOT V_FLAG IS INITIAL.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = IT_LAYOUT1
IT_FIELDCAT = IT_FIELD_CAT1
I_TABNAME_HEADER = 'PA0002'
I_TABNAME_ITEM = 'PA0008'
IS_KEYINFO = wa_keyinfo
TABLES
T_OUTTAB_HEADER = IT_PA00021
T_OUTTAB_ITEM = IT_PA0008.
ENDIF.
CLEAR: IT_PA00021,IT_PA0002,IT_PA0008.
ENDLOOP.
WHEN 'BACK'.
EXIT.
ENDCASE.
ENDFORM. "USER_COMMAND
reward points if useful,
venkat. -
How to send query parameters using BIApplicationFrame in WD Java
HI,
I am working on integration of BEx WebTemplate in webdynpro view.
I am using BIApplicationFrame ui element for this.
I set the template id in template property of BIApplicationFrame.
I have to execute a query of this template.
So i selected the option 'query' of dataProviderStateType property.
How to send the query parameters to that query.
I am setting the fowlloing values in BIApplicationFrame
dataProviderStateName: BEx Query Name
dataProviderStateType: query
server: server url
server type: java
templateid: BEx template id.
The query screen is opening ..But no data.
I have to pass the following two parameters to that query:
BI_COMMAND_1-I_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=ZVARCUST01&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=0500000003
&BI_COMMAND_2-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_2-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=0I_CMNTH&BI_COMMAND_2-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_2-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=01/2000-12/2002
How to send these two query parameters using BIApplicationFrame.
I did not find any help ( Example tutorial ) for BIApplicationFrame UI element in SDN.
Please help me.My problem solved. I used the following code in wdModifyView() method.
Map parameters=new HashMap();
parameters.put("BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=ZVARCUST01&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING","0500000003");
parameters.put("BI_COMMAND_2-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_2-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=0I_CMNTH&BI_COMMAND_2-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_2-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING","01/2000-12/2002");
WDBIMethods.addCustomParameters(wdThis.wdGetAPI(),"BIApplicationFrame",parameters); -
How to setup bidirectional streams using OEM.
hi,
can anyone guide me in setting up bi-directional streams using OEM??
Thanks in Advance.Click on the database --> data Movement --> setup under streams. Follow the steps whether you want schema replication / table replication / etc. You need to populate the host credentials for oracle.
-
How to edit an existing muse created website with muse on a new computer?
Hi Everyone,
I'm pretty new hear and could use some help. I downloaded Muse back when it was still in beta and used it to create a website www.southernski.com I really liked it's ease of use since i'm a newb at writing html and haven't gotten the hang of Dreamweaver. I need to update the site and make changes. The pc i was using before was running XP and the version of Muse then worked on it fine. But Muse has left XP behind and will not install the update on that machine and so I've installed a new version of Muse on a laptop with Windows 7. The files i used to create the website are on the pc that has failed and so I need to try and find out if it is possible to edit the existing site I have uploaded on a hosting site (not muse or adobe) and make the changes that are needed. Can someone please help me answer this question?
Thanks in advance for any help!
SeanHello Sean,
It is not possible to import the pages etc. from the hosting site to Muse for editing purposes. This is because Muse only opens files with the extension .muse (which is the extension for the muse website file that is created and saved in Muse). It is not possible to import .html files etc. in Muse for editing purposes, hence, you won't be able to edit your current website in it, however, if you are able to locate the .muse file that you created earlier (if you have a back up somewhere), you can simply copy that file in your new computer and open in it in Muse to start editing.
Hope this helps.
Cheers
Parikshit -
How to edit people out using fillters?
I have video that I need to edit for a project how do I edit someones face and or body using the fillters in Final Cut Pro? I seen this technique used all the time on tv. I need to know how to do this because this is an very imoportant project and I do not want to edit out too much video because of a few people that do not want to be in the video.
I do not know what term is used, but the perosns face is blurd so you do not know who they are. Hope this helps explain what I want to do better.You've got some experimenting to do!
Try copying the clip in question and pasting the copy to V2 above the original. Now add a Blur filter to V2. Adjust the amount of blur till it's the way you want it then crop track 2 till only the part of the video you want blurred is blurred.
That's the basics. Now you'll want to experiment with masks to get the shape you want and you may have to start playing with Motion Keyframes if your video is moving so that you can follow the guy you want to blur.
It's not really that hard but the only way you're really going to figure this out is to get out the manual and play till you get what you want.
Good Luck
rh -
How to retrieve export parameters using startrfc?
When using the standard SAP client program <b>startrfc</b> to remotely call an ABAP function in SAP, is it possible to retrieve the export parameters?
The startrfc program only seems to allow you to send an import parameter (using the E option) and to send/retrieve a table, using the T option.
For example, the function BAPI_USER_EXISTENCE_CHECK exports the parameter RETURN of type BAPIRET2. How can you retrieve this export parameter using the startrfc program?HI Linda,
Create an export variable and in the parameter reference give the field reference of the field like this VBELN[], then this forms a structure parameter...
Then place all your recorded SAPGUI/TCD with in Message/EndMessage Block, and make a rule as an expected message, something like this...
MODE MSGID MSGNR MSGV1
'E' '/DBM/COMMON' 467 E_VBELN
MSGID & MSGNR might differ in your case use them accordingly, also check the previous log and make sure that the order number is MSGV1, if it is in MSGV2, place the variable E_VBELN in the MSGV2 field of the message Rule.
This should generally fetch you all the order numbers...
But in some situations it didnt work in my case, so here is the second solution...
MESSAGE ( MSG_1 ).
SAPGUI/TCD RECORDING
ENDMESSAGE ( E_MSG_1 ).
DO ( &TFILL ).
IF ( E_MSG_1[&LPC]-MSGID = '/DBM/COMMON' AND E_MSG_1[&LPC]-MSGNR = 467 ).
E_VBELN[V_COUNT]-TABLE_LINE = E_MSG_1[&LPC]-MSGV1.( V_COUNT Should also be declared, but as a local variable)
V_COUNT = V_COUNT + 1.
ENDIF.
ENDDO.
This was you will get all the order numbers in one variable, which you can access in any script while looping the varable based on its length..
Check and modify accordingly.
Hope this helps..
Best regards,
Harsha
PS: award points if this answer helps solve your issue. -
How to pass request parameters using html:link in struts
Hi All,
I am trying to send parameters to action class using <html:link>.
Can anybody give sample code how to do it?
Thanks in advance.
By
K.Siva Prasad Reddyhi,
you can pass the parameters in link like this
http://www.xyz.com&username=someuserID&password=somePassword
username and password are parameters which you want to pass as paramets to server..hope this will work for you...
Thanks
Surya -
How to send query parameters using BIApplicationFrame
HI,
I am working on integration of BEx WebTemplate in webdynpro view.
I am using BIApplicationFrame ui element for this.
I set the template id in template property of BIApplicationFrame.
I have to execute a query of this template.
So i selected the option 'query' of dataProviderStateType property.
<b>How to send the query parameters to that query.</b>
I did not find any help ( Example tutorial ) for BIApplicationFrame UI element in SDN.
Please anybody help me out.Hi Charan
I tried to add the costume parameter in BIApplicationFrame same method that you mentioned. But the result is not coming.
I am trying to pass the input variable for the query.
My url is:
http://<host>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=BTMP_20100929_054852&DUMMY=8&debug=x&BI_COMMAND=&BI_COMMAND-BI_COMMAND_TYPE=SET_SELECTION_STATE&BI_COMMAND-CHARACTERISTICS_SELECTIONS=&BI_COMMAND-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1=&BI_COMMAND-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=ZCUSTOM1&BI_COMMAND-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS=&BI_COMMAND-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1=SELECTION_INPUT_STRING&BI_COMMAND-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING=C07&BI_COMMAND-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF=DP_1&REQUEST_ID=11
If I execute the url directly the out put is coming perfectly after filtering and if I pass the parameter by adding code in wddomodifyview method the filters not working.
My webdynpro code given below:
mapParams.put("BI_COMMAND=&BI_COMMAND-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF=DP_1&BI_COMMAND-BI_COMMAND_TYPE=SET_SELECTION_STATE&BI_COMMAND-CHARACTERISTICS_SELECTIONS=&BI_COMMAND-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1=&BI_COMMAND-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=ZCUSTOM1&BI_COMMAND-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS=&BI_COMMAND-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1=SELECTION_INPUT_STRING&BI_COMMAND-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING","C05");
Appreciate if you can help me on this.
Sajith -
How to edit ebook titles using itunes
I am trying to update the ebok info using itunes. In fact, the iPad is not synced to my computer.
It is synced to my sister's, but I am able to view the list of ebooks in the iPad in my itunes sidebar under the Books section under the name of the iPad in Devices. I am also able to edit the info on the itunes right clicking on the specific ebook and choosing get info.
The problem is that these changes would not reflect in the iPad. I tried restarting both iBook and iPad. In both cases it seems that itunes shows the updated info while the iPad still shoes the old ones.Restore. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
How to measure system parameters using java?
Hi All,
I am having a client which is monitoring the system parameters as CPU,Memory, Disk using cscripts on windows and shell scripts on Linux.
These scripts are executed using exec().
Is it possible to possible using any java's built in classes?
Please help me.
Thanks in advanceIs it possible to possible using any java's built in
classes?There are no built-in Java classes to do low-level hardware/platform-specific things like inspecting the CPU, etc. Wrong tool for the job. -
How to edit http.conf using OAM
Hi.
After making changes to httpd_pls.conf and httpd.conf, I need to use OAM to do the same.
I am in the Autoconfig area of OAM but cant find how to makes these changes!
Thanks guys!Dan,
Do you want to change the value of a parameter or add a new one? To change an existing parameter, search for it using the context editor (or search the context file using the parameter internal name). If this is a new parameter you want to add, you would need to consider customizing AutoConfig.
Note: 270519.1 - Customizing an AutoConfig Environment
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=270519.1
Regards,
Hussein -
How to edit wordpress themes using dreamweaver?
Can anyone help me understand how to do this. and is this the best way to do it or should i be using a different program? Would really appreciate some help.
Have a look at ThemeDreamer, a WP Extension for DW users.
http://www.themedreamer.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
How put visible a parameters using RADIOBUTTONS
Hello:
I would like to ask one favor , i am trying to put a parameter in a visible mode, when i select a specific radiobutton.
i am using a selection-screen and when i execute the program my radiobuttons are appears well, but i need to select one of the radiobuttons and after of that i need to present the correspondin parameters for the radiobutton selected before.
does anybody knows have to do that?
I making the validations of the radiobuttons area using the AT SELECTION-SCREEN ON RADIOBUTTON GROUP opc. and then i ask for what of the radio was selected, and after of that i need to present the parameter.
thanks a lot for you helpHi,
Use the below code.
tables: pa0000, pa0001.
parameters: p_rad1 radiobutton group rad1 default 'X' user-command rusr,
p_rad2 radiobutton group rad1,
p_rad3 radiobutton group rad1,
p_rad4 radiobutton group rad1,
p_rad5 radiobutton group rad1.
selection-screen: begin of block blk1 with frame.
parameters: p_pernr like pa0000-pernr modif id ABC,
p_stat2 like pa0000-stat2 modif id DEF,
p_werks like pa0001-werks modif id GHI,
p_persg like pa0001-persg modif id JKL,
p_persk like pa0001-persk modif id MNO.
selection-screen: end of block blk1.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'ABC'.
IF p_rad1 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'DEF'.
IF p_rad2 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'GHI'.
IF p_rad3 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'JKL'.
IF p_rad4 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'MNO'.
IF p_rad5 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
*Note
*Titles for Rado buttons and parameters.
*P_RAD1 Personal Number
*P_RAD2 Employment Status
*P_RAD3 Personnel Area
*P_RAD4 Employee Group
*P_RAD5 Employee Sub group
*P_PERNR Personal Number
*P_PERSG Employee Group
*P_PERSK Employee Sub group
*P_STAT2 Employment Status
*P_WERKS Personnel Area
Maybe you are looking for
-
Error while running a concurrent program.
Hi All, I have written a plsql procedure and registered it with apps. When i run the program it is giving FDPSTP failed due to ORA-20100: File l0137058.tmp creation for FND_FILE failed. You will find more information on the cause of the error in requ
-
List View: First scheduled appt on Saturday shows as last appt on Friday
A very odd thing is happening on my iPhone 4. When I schedule an appt in the calendar (I have 2 Exchange ActiveSync cals and it happens regardless of which cal I add the appt too) my first appt on Saturday, regardless of what time I schedule it for o
-
I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube. I can only see pics and video saved in my iphone. No other options are working.The worst part is
-
Loss of color and lines in notes app
After latest updates, Notes app yellow background and lines are missing.
-
Best workaround for iPhoto library on timecapsule
Hi, I've got a macbook here, with a time-capsule connected. I would like to work with the iPhoto library on my time-capsule, as the library is quite big. Extra info: I've already noticed that if I put the library on the time-capsule iPhoto is real un