How to Edit Key Fields or Delete Lines from Table Entries
Hi Experts
While releasing Transport Request Number we are getting an error during release. This seems to be as a result of improper data feed while running of eCATT's . The dates in the all these fields have been entered as " . .0101" which is in the wrong format ( eg. Table T811F u2013u201CSDATEu201D field). "SDATE" seems to the key field of the table . Can you please guide on how we may delete these lines or edit the field in the table.
Regards
Ananda
Hello,
I dont think its a good idea to delete the records from those standard tables. You rather re-run your ecatt and edit/update the existing records and try.
regds,
Kiran
Similar Messages
-
How many primary key fields allowed for one table?
hi,
when i creating a table , how many primary key fields are allowed for one table.
please any one give ans
thanksJust checked it, Its 255, not 155. You can have as many key fields as you want, but you can not go over the 255 byte length for the total of all key fields. You will get a warning for over 120, as it says that there is limited functionality with a key over 120 in length.
Again, this is a total length of all key fields.
Regards,
Rich Heilman -
How to edit particular field in alv list display-urgent
HI ALL,
my requirement is i am displaying output using alv list display. now my rewuirement :
i am displaying out in edit mode only. when user clicks one particular field
for example record is like
runrate a01 maheed -> if user clicks on a01 this field should be editable. i have a following code
w_field-edit = w_edit.
w_field-input = 'X'. -> using this code i can able to display entire colomn in edit mode. this not suits my requirement.anybody can send me the sample code please.
thanks,
maheedhar.tCan you please send me the sample code plz.
i am sending my code below.
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
data : checkbox type c value 'X',
action type c,
end of it_secobjects.
data : begin of it_secobjects1 occurs 0.
include structure ZUSER_SECOBJECTS.
data : checkbox type c VALUE 'X',
end of it_secobjects1.
data : wa_ita like line of it_secobjects.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
maheed-start.
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
delete it_SECOBJECTS.
endloop.
*RS_SELFIELD-REFRESH = 'X'.
maheed-end.
maheed-start. apr 13
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
delete it_SECOBJECTS.
endloop.
RS_SELFIELD-REFRESH = 'X'.
when 'SAVE'.
DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
commit work.
refresh :IT_SECOBJECTS1.
maheed-end. apr 13
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
ENDCASE.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog." USING w_edit TYPE any.
data : w_edit type c.
clear w_edit.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-EDIT = 'X'. "maheed
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_PARTNER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m03.
w_field-edit = w_edit.
w_field-input = 'X'.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'INACTIVE'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 3.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
DATA : LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'ACTION'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.t -
How to update key fields for table
Hi,
how to update key fields for a table.The update statement is not working for the same.
Regards,Hi,
See the below example.
TABLES SPFLI.
DATA WA TYPE SPFLI.
MOVE 'AA' TO WA-CARRID.
MOVE '0064' TO WA-CONNID.
MOVE 'WASHINGTON' TO WA-CITYFROM.
UPDATE SPFLI FROM WA.
MOVE 'LH' TO SPFLI-CARRID.
MOVE '0017' TO SPFLI-CONNID.
MOVE 'BERLIN' TO SPFLI-CITYFROM.
UPDATE SPFLI.
CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
Regards,
raj. -
How to set key fields in a Database view
Hi guru's
iam balaji,plz guide me with how to set key fields in a view.......that field is a non key field in the base table....
thanks in advance,
Balaji.Stake a look at this:
Diagnosis
In the view, not all of the mandatory fields were included as key
fields. The key of the view therefore is not unique.
System Response
All the fields are regarded as key fields in order to guarantee that th
key lengths are unique.
Procedure
For views with a large number of fields, this could have a negative
effect on the performance for the language construction described below
In this case, all the mandatory key fields should be included in the
view.
regards -
Hi gurus in ALV how to edit the fields on out put list
hi gurus in ALV how to edit the fields on out put list
hi
REPORT ZSB_ALV_EDITABLE_SAMPLE.
TABLES: SFLIGHT.
DATA: gc_container TYPE scrfname VALUE 'LIST_AREA',
gc_custom_container TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
gc_grid TYPE REF TO CL_GUI_ALV_GRID,
gs_layout TYPE LVC_S_LAYO,
gt_fieldcat TYPE LVC_T_FCAT.
DATA: ok_code TYPE SY-UCOMM.
DATA: gt_outtab TYPE TABLE OF SFLIGHT.
*DYNPRO
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '100'.
CREATE OBJECT gc_custom_container
EXPORTING
container_name = gc_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5 .
PERFORM prepare_field_catalog CHANGING gt_fieldcat .
PERFORM prepare_layout CHANGING gs_layout .
PERFORM get_alv_display.
ENDMODULE.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
IF OK_CODE = 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR OK_CODE.
ENDIF.
ENDMODULE.
FORM prepare_field_catalog CHANGING gt_fieldcat TYPE LVC_T_FCAT.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fieldcat[].
ENDFORM.
FORM prepare_layout changing p_gs_layout TYPE lvc_s_layo.
p_gs_layout-zebra = 'X'.
p_gs_layout-edit = 'X'.
ENDFORM. " prepare_layout
FORM get_alv_display .
SELECT * FROM sflight INTO TABLE gt_outtab UP TO 10 ROWS.
CALL METHOD gc_grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT'
IS_LAYOUT = gs_layout
CHANGING
it_outtab = gt_outtab
IT_FIELDCATALOG = gt_fieldcat
ENDFORM. " get_alv_display -
How to edit "Credit" field for lots of shots all in once?
I can't seem to be able to know how to edit "Credit" field for lots of shots all in once.
I made a mistake of not focusing on the autofill feature which did put my friend's name instead of mine.
How to correct this mistake without modifying EACH shot been imported alone (and there is plenty of them), I don't know about you but it looks like a total time waste.
Aperture 2.1.3I apologize,but this is just too much info for me to type.
Go to Help >> Aperture User Manual and read
Working with Metadata Views Page 281
Working with Metadata Presets Page 284
Batch Changing Metadata Page 288
DLS -
How to find the number of fetched lines from select statement
Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santoshHi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar -
How do you delete records from table with data in a select option
how do you delete records from table with relevant to data in a select option..how to write coding
Hi,
Try
if not s_select_option [ ] is initial.
delete * from table
where field in s_select_option.
endif.
commit work.
Be careful though. If select option is emty, you will delete the entire table.
Regards,
Arek -
Update Profit Center Field in CO Line item tables
Hi,
We are working on ECC6.0 NewGL with Real-time CO-FI integration for Cross Company Code and Cross Pofit Center.
For those CO internal documents (like activity confirmation at production order) where there is no cross company code or cross profit center postings, no FI document is generated and hence table FAGLFLEXA is not updated. So, we wanted to take data from CO table COEP / COVP for these internal CO documents. However, there is no Profit Center field in CO line item tables COEP / COVP. We don't want to refer to Object Number (OBJNR) of COEP / COVP tables and take profit center from master table of cost centers, IOs etc..,as Profit center in the cost center, IO masters may get changed latter.
I tried to generate a new report through report painter from structure CCSS, but Profit center is not defined as Charactericts there. Hence of no use.
Can we append Profit Center field in CO line item tables COEP / COVP and update tatabase at the time of posting? Is there any risk?
Please suggest any other alternative...
Thanks,
BijayHi,
As per the standard process we can't derive PC from CO-internal Object...as per my knowledge.
Better you can derive from IO-CC master PC ....if your question that it will change frequently then -no control can make.
Regd,
Kha -
How do I get rid of deleted emails from my work email account on my Air?
How do I get rid of deleted emails from my work email account set up on my Air. Keep getting error message "An error occurred while moving messages to mailbox "Trash - On My Mac" They go away from deleted account folder when I hit "trash button" but then they come back later.
Back up all data. Rebuild the mailbox. Try to delete the messages again.
-
How to get the field name of an internal table during runtime?
How to get the field name of an internal table during runtime?
Hi Sudhir,
Declare and Use Get Cursor Field in Your Prm to get the field Name of the Intenal Table
Example Code:
<b> DATA: v_field(60). " Insert this code.
GET CURSOR FIELD v_field. " Insert this code.</b>
<b>CHECK v_field = 'ITAB-KUNNR'. " Insert this code. (or)
Write: v_field.</b>
Regards,
Ramganesan K. -
Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh KumarHi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar -
Query to conbine 2 lines from table
Hi all
I have a problem in constructing sql query to combine 2 lines from table in Oracle 11g database.
I will explain, i have one table containing call transactions loaded in one table from 2 different sources, one is from IN which is tagged IN and the other from MSC which is tagged MSC. One subscriber call is registered in IN and MSC and loaded in the table. The problem is the data from IN contains the call duration but not contains Cell information. I'm creating datamart to combine the two lines in one lines but i don't know how to do from query.
Here is an overview if my data:
Source Orig Dest startdate cellid duration
MSC 550000 220000 15/05/2012 02:03:29 235e
IN 550000 220000 15/05/2012 02:03:30 10
MSC 550000 220000 15/05/2012 02:04:00 235e
IN 550000 220000 15/05/2012 02:03:59 15
MSC 550000 220001 15/05/2012 02:06:18 235f
IN 550000 220001 15/05/2012 02:06:18 60
The line i want to have is for each line of IN source i sjhould have the cellid like below:
IN 550000 220000 15/05/2012 02:03:30 235e 10
IN 550000 220000 15/05/2012 02:03:59 235e 15
IN 550000 220001 15/05/2012 02:06:18 235f 60
The query should linked by Orig, Dest and date but for some rows there are difference in seconds.
Please help.
Lucienot.user13513449 wrote:
Hi
Thanks for the reply, here below the create table script and some insert data example:
CREATE TABLE TRANS
CALLTRANSTYPE NVARCHAR2(6),
ORIGANI NVARCHAR2(40),
TERMANI NVARCHAR2(40),
STARTTIME DATE,
STOPTIME DATE,
CELLID NVARCHAR2(10),
CONNECTSECONDS NUMBER,
SWITCHCALLCHARGE NUMBER
0 555283806 222591626 05/15/2012 00:10:04 05/15/2012 00:13:31 03e9:7565 O 207.00
Insert into trans values('MSG','555283806','222591626',to_date('05/15/2012 00:10:04','mm/dd/yyyy hh24:mi:ss'),to_date('05/15/2012 00:13:31','mm/dd/yyyy hh24:mi:ss'),'03e9:7565',10,null); ...It looks like there's some mistake at the end of the CREATE TABLE statement and before the first INSERT statement. Is that supposed to be another INSERT statement?
Test your code and, if necessary, correct it before you post it.
Is that sample data supposed to produce the results you posted originally?
If so, explain, step by step, ho9w you get them.
If not, post the results you want from that smaple data, formatted, between \ tags, as explained in the forum FAQ {message:id=9360002}
In my orioginal message, I said "ORDER BY" where I meant "GROUP BY". If you change that, and use your new table and column names, does the query I posted earlier do what you want? If not, point out where it is wrong, and show how you might get the right results in those places. -
How to make default Currency depending upon plant in table entries
Hi,,
How to make default Currency depending upon plant in table entries?
I am making entries in SM30.
I have the following fields in z table.
plaant , material,month.year,PFvalue,Currency.
Can some body throw light for this issue,please?\
I am familiar with modification-events.
With Regards,
JaheerHi,
In PBO, within a LOOP, table control is filled via a Structure/Work Area.
In that module, code as follows,
LOOP AT SCREEN.
IF WA-FIELD1 = C_1 AND SCREEN-GROUP1 = C_G1.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Here, WA is a strcture & FIELD1 is its field, like that...
I already did this.
Check it out & Reply.
Yours,
R.Nagarajan
We can
Maybe you are looking for
-
Apple DU vs SoftRAID's drivers for RAID volumes, performancewise?
Hi, For some time I have been using SoftRAID's (http://www.softraid.com/) drivers (v. 4.0.7) for an OS+apps SSD and my users' accounts on a 2*2TB RAID0 (WD Caviar Blacks) volume. At present the User volume is about 50% full (2 of 4TB). I am consideri
-
Hello all, I've been working with templates for the past few weeks and I'm loving it! Everything has gone smoothly till now. I'm having a very unsual problem with repeating regions and I can't seem to figure out what is causing it. Hopefully someone
-
Changing Default Portal Error Message
hi, How do I change most of the portal error messages ? For e.g. when i disable the Development Component in the Web Dynpro Content admin to disallow user to access during code maintenance, i wish to inform them that we are doing some maintenance se
-
I have abs. I want to rebuild all my packages; not the whole world, just MY world (the ones I've installed), so I can apply my preferred compiler optimizations. Can makeworld do that? I built one by hand (proftpd). Then I ran pacman on the full packa
-
File size in export not working
After upgrading to Lightroom 5, the file limit during export does not work anymore. A 10M limit produced a JPEG file 26,437KB. A 5M limit produced one 17,504KB. Known bug?