How to edit screens recorded in training mode?

This one is really bugging me. Why? Because I've done it before but forgotten how!
The task:
Some months ago I had to capture "a lot" of user actions from a SME (Subject Matter Expert) on a particular online application. I clearly remember we set up Captivate 4 to record his actions as he went through each screen. I'm pretty sure it was set to record in "automatic/ training mode". Later, when he was done, I went back in to each CP slide and edited/cropped each of the background images/screens using the internal CP image editor because each screen was saved as an image (as opposed to an embedded background).
Now, I have a similar task to perform but I can't remember the exact setting I used in CP to achieve this. I've tried multiple combinations but everytime the screen is recorded as a background - hence, not editable.
Any ideas?

Hello,
Not sure if this is the work flow you are looking for:
Find the background in the Library
Use the right-click menu and choose Edit background
But you are also talking about cropping? Do you want to change the resolution of the project? Then you'll have to rescale the project, think you'll find it in the Project menu (I'm on Captivate 5)
Lilybiri

Similar Messages

How to edit the records in error stock.

Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAP

HI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM

How to edit the records value fetched by select statement query in sqldever

How to edit the records value fetched by select statement query in sqldever 2.1.1.
EX-
SELECT * FROM emp WHERE ename like 'Jaga%'
Edited by: user9372056 on Aug 31, 2010 2:16 AM

Hi,
Although some forum members may be using that tool, there is still a dedicated forum for SQL Developer.
SQL Developer
Maybe your chances are better there.
Regards
Peter

Editing screen recording so that only the application screen is shown

I am doing a screen recording of an application that uses a browser. I need to be able to remove surrounding the application. Preferably even any sign of a browser. Do not find any info on the editing features of Quicktime Pro, so not sure if I should upgrade or not. Would rather not, if it cannot do what I need it to do. Do not find any concrete answer on apple quicktime website...

QuickTime Player Pro (7.6.3) doesn't have any screen recording features.
QuickTime X does have screen recording but it is only for the entire display (not a window). You could record in X and overlay the file with a video "mask" using the QuickTime Player Pro that could remove any unwanted area.

How to edit my video in portrait mode?

Hey! I'm editing some video that a friend of mine took, and he of course held the phone in portrait mode
So now I'm editing it in portrait mode, mixed with some other landscape shots. But that's not so much the issue. I need help with scaling the portrait shots correctly, as now the overview window cuts the video in half while the preview window shows it just fine.
Picture:
So how do I scale the overview window to whats shown in the preview window?
Thanks for all your help!

I suspect that the issue is that the overview window is showing the *sequence* settings while the preview window is showing the clip settings (which is "side-ways").
I just did a test with a vertical clip. When I dragged it into an exisiting sequence I got the same result you did. Premiere did *not* ask if I wanted to confrom the sequence to the clip. It did not actually "scale" the clip but it did show the same thing you have where only part of the clip is visible.
When I dragged the clip to the "make new sequence from clip" icon. I got a properly sized sequence and preview window.
Of course that's not going to help you much if you're combining portrait and landscape footage.
I would start by dropping a piece of landscape video in a sequene and conform the sequence so you know it's right for that footage. Then drop a portrait shot in (doesn't matter which one) and go to "Effects Controls" amd Motion. Scale the clip down so it fits the window and make a note of the percentage. Now you've got the formula for all future portrait clips.
To get the bounding box change the "Fit" option to a percentage in the overview window.
Hope this helps

How to edit source sequence from 'multicam mode' sequence (not bearing multicam icon)?

I'm 'multicam editing' what i believe I setup as a regular sequence, then enabled (i believe by nesting) as opposed to a textbook multicam sequence setup with multicam icon where you setup a 'source' then a 'target' prior to starting. my 'multicam' sequence that works like a charm does not bear the multicam icon. Is there a difference between the two or are they essentially the same?
I was able to switch cameras on the fly like a charm so i 'multicam' edited an entire show when I realized I had 1 minor audio-to-picture beat-mismatch to correct in the source.
I read that to fix this, press Ctrl+Shift+F where you want to open the source sequence in the Timeline panel (and this did open expanded tracks as expected near that designated point in the timeline) so i made the quick edit and saved changes. But now playing back my multicam sequence (that does not have a multicam icon), I'm not sure what i must do to see those changes so i can continue/finish my show edit? it isn't automatically doing this as i would expect.
i'm forced to wonder what's going on, what 'source' I actually edited, and how or if it is connected to my multicam sequence if at all. my icons seem reversed to me i.e. the sequence with expanded independent a/v tracks bears the 'multicam' icon whereas the sequence I actually did the multicam switching on the fly does not bear the 'multicam icon' or the audio-picture realignment edit I made in the expanded tracks.
if these two are related, why do edits in the expanded sequence not reflect in the collapsed. is there any other way to reveal/expand the multicam sequence? so confused.
Message was edited by: Tanya Lee
Message was edited by: Tanya Lee

I'm 'multicam editing' what i believe I setup as a regular sequence, then enabled (i believe by nesting) as opposed to a textbook multicam sequence setup with multicam icon where you setup a 'source' then a 'target' prior to starting. my 'multicam' sequence that works like a charm does not bear the multicam icon. Is there a difference between the two or are they essentially the same?
I was able to switch cameras on the fly like a charm so i 'multicam' edited an entire show when I realized I had 1 minor audio-to-picture beat-mismatch to correct in the source.
I read that to fix this, press Ctrl+Shift+F where you want to open the source sequence in the Timeline panel (and this did open expanded tracks as expected near that designated point in the timeline) so i made the quick edit and saved changes. But now playing back my multicam sequence (that does not have a multicam icon), I'm not sure what i must do to see those changes so i can continue/finish my show edit? it isn't automatically doing this as i would expect.
i'm forced to wonder what's going on, what 'source' I actually edited, and how or if it is connected to my multicam sequence if at all. my icons seem reversed to me i.e. the sequence with expanded independent a/v tracks bears the 'multicam' icon whereas the sequence I actually did the multicam switching on the fly does not bear the 'multicam icon' or the audio-picture realignment edit I made in the expanded tracks.
if these two are related, why do edits in the expanded sequence not reflect in the collapsed. is there any other way to reveal/expand the multicam sequence? so confused.
Message was edited by: Tanya Lee
Message was edited by: Tanya Lee

Comprehensive Captivate Screen Recording Tutorial

I am looking for a complete treatment of screen recording, software simulations, FMR, and so forth. The ones I have found tell me how to check boxes and establish the settings. What I am looking for is how to capture a full screen (so resolution and screen size is an issue), how to scroll smoothly (on a website "how-tom" the scrolling is jerky, auto-panning frequently overruns the position of the screen view, and manual panning results in mouse movements that are more for moving the recording region than for the demo being recorded.), and how to edit the results without having the mouse appear on a subsequent screen shot or how to take out portions or how to add a delay on certain portions.
I am using Cp7. I want to record a demonstration about using our website. The CP project is to be published at 800x600. My monitor is 1920x1080. How do I work around the size differences and avoid the poor scrolling and panning? I have recorded at 1920x1080 and then resized the project in Captivate to 800x435 (my numbers may be off but I maintained the aspect ratio) and when I play it back, it is jumpy and certain images flash.
I just want a decent turorial. Perhaps a training class. I full treatment of how-to do screen recording so that it is smooth and is at the right screen/image size.
Any help is appreciated.
Signed, a small Adobe product user who yearns to be a big Adobe product user with just one great product: Captivate.
Michael

If I turn out to be correct, yes. But I might be wrong.
You can test whether or not this is the issue by just capturing a section of the Prezi where nothing much in the way of animation is happening. Find say a five or ten second slot with little or no animation and see whether that FMV part still exhibits the same issue. If your PC seems to handle that OK, then try a longer section with more animation. If I'm right, you should not have the issue where little or no animation is present, but the longer your file goes on and the more animation the chip in your motherboard has to decode, the slower it will get,

How ti disable screen fields in Module pool

hi
How to change screen fields to DISPLAY MODE aftr clicking on a particular pushbutton in Module pool prg .
regards
chetan
Edited by: chetan teli on Jul 29, 2008 1:04 PM

hiiii
use following code for disabling field
IF p_rad2 IS INITIAL .
    LOOP AT SCREEN.
      IF screen-name CS 'p_docno'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.                           " IF screen-name CS 'p_docno'.
    ENDLOOP.                           " LOOP AT SCREEN.
ELSE.
    LOOP AT SCREEN .
      IF screen-name CS 'p_docno'.
        screen-active = 1.
        screen-input = 1.
        MODIFY SCREEN.
      ENDIF.                           " IF screen-name CS 'p_docno'.
    ENDLOOP.                           " LOOP AT SCREEN .
ENDIF.                               " IF p_rad2 IS INITIAL .
regards
twinkal

Editing a recording

I have several questions regarding the offline (downloaded)
recordings.
1. Any suggestions on how to edit a recording that has been
downloaded?
Seems like an additional program (like Adobe Media Player) is
needed just to play the recording when is has been downloaded
offline.
2. With that in mind, does that mean if I put the recording
on a CD or non-Flash -based server that the end user will need to
either download a player or have it on the cd to be installed?
3. Seems like most NLI editors won't recognize the offline
(Including Adobe Premiere Pro) .flv file or isn't it a true .flv
file?
4. Wasn't Presenter 7 suppose to be able convert files and
why does it do such a poor job of allowing offline .flv file to be
inserted into a PowerPoint?
Thank you in advance

Yes the options offered by Connect are very basic. For
playback or importing into Premiere I've used these sites to
convert the FLV to WMV
http://www.zamzar.com/
http://online.movavi.com/
Good luck!

Edit Pre-recorded vocals

I have been trying to work out how to edit pre-recorded vocals using the Voicelive 2 and Logic Pro. I have managed to figure out the settings on the voice live 2 but I cannot work out what to do on the logic side of things. This is what I have been told (see below), but I dont understand what this means.
In LOGIC you have to set up a SEND (to VoiceLive 2 via MAUDIO SPDIF out LEFT!!! CHANNEL ONLY) for sending the dry Vocal track and RETURN the processed signal on a new stereo track (from VoiceLive Rack / input source = MAUDIO SPDIF input L & R channels). Don't forget to record enable the track. To control harmony / detecting automatically the key, you may SEND any audio signal (i.e. your instrumental, piano/ rhodes chord track etc.) via MAUDIO SPDIF RIGHT!!! CHANNEL to VL 2.
Would anyone be kind enough to explain what this means and what I need to do? ( i am trying to post edit pre-recorded vocals using voice live 2, logic 9 and m-audio fast track ultra).
Thank you

Open GB, drag the AIFF file from the Finder onto the GB window
Hey presto!
Vince

How to edit

Hi,
How to edit a record of a table using BC4J and JSP..
Can any body please give me the sample code or approach..

Take a look at the Logic videos at this site.
http://www.apple.com/logicexpress/quicktour/index.html

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

Did you remove Quicktime X?
On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
You will need to reinstall OS X to get Quicktime X back if you have deleted it.
I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

How to edit JVC/Panasonic/Canon .mod video in Windows Movie Maker then upload to YouTube for sharing

Quick View:
Part 1: How to import .mod video to Windows Movie Maker
Part 2: How to edit the video with Windows Movie Maker
Part 3: How to upload your video to YouTube
Know More:
1. Which Camcorders record video in .MOD type?
2. What file types are supported by Windows Movie Maker?
3. What file types are supported by YouTube?
Part 1: How to import .mod video to Windows Movie Maker
Step 1: Load files
First copy the MOD file from your video camera to your hard drive, then download, install and run MOD Converter, click the "Add Files" button to browse your computer hard disc and load the MOD/TOD video files you want to convert to the program.
Step 2: Output Setting
In the bottom of the main interface, select an output format supported by Windows Movie Maker for each video file and specify a directory on your computer to save the output files.
Step 3: Start convert
Click "Start" button on right bottom of the main interface, you are allowed to start conversion.
Step 4: Import converted video to Windows Movie Maker
Click on "File". Then click on "Import". A window will appear. In the window, navigate to the video clip you converted just now. Then double click on the file. You'll see the icon for the file in your Windows Movie Maker "Collections".
Part 2: How to edit the video with Windows Movie Maker
Step 1: Add transitions and special effects
In the Movie Tasks pane, under Edit Movie, click View video transitions.
Preview transitions by double-clicking them and watching the Preview Monitor. Once you've found a transition you like, drag it from the Video Transitions pane, under Edit Movie pane to the box between two of your clips. This inserts the transition between the two clips.
Step 2: Add titles and credits
If you want to add a title before, after, or on top of a clip, click the clip on the storyboard or timeline.
In the Movie Tasks pane, under Edit Movie, click Make titles or credits.
Step 3: Add Music
In the Movie Tasks pane in Movie Maker, under Capture Video, click Import audio or music.
In the Import File dialog box, click the name of the song you want to use in the background. Then click Import. This adds your song to your collection but does not add it to your video. Drag the song from the collection to the video clip where you want the music to start playing.
Step 4: Add narration
If you have a desktop computer, connect a microphone. Microphones are available from most electronics stores. If you have a portable computer, you can use the built-in microphone. However, you will get a better-quality recording if you connect an external microphone. In Movie Maker, click the Tools menu, and then click Narrate Timeline. On the timeline, click the clip you want to narrate. You can narrate clips one at a time, or you can narrate the entire movie all at once. If you narrate individual clips, you can rearrange them later and keep your narration synchronized. If the narration is too loud or too soft in comparison to the movie, right-click the narration on your timeline, and then click Volume.
Step 5: To save your movie to your computer
In the Movie Tasks pane, under Finish Movie, click Save to my computer.
The Save Movie Wizard appears. On the Save Movie File page, type a name for your movie. You can also choose a folder to save it in by clicking the Browse button, but My Videos (the default) is usually the best place to save your movie. Then click Next. On the Movie Setting page, click Next to accept the default setting of Best quality for playback on my computer.
Movie Maker saves your movie, which might take several minutes. On the Completing the Save Movie Wizard page, click Finish. If Play movie when I click Finish was selected (it is selected by default), the movie will automatically play in Windows Media Player. Now you can watch your videos anytime by opening your My Videos folder and double-clicking your movie.
Part 3: How to upload my video to YouTube
A video file should meet the following requirements so that it can be uploaded to YouTube site.
1. In an acceptable format: WMV, MPEG4, MOV, AVI and MPEG.
2. Video length is shorter 10 minutes.
3. File size is smaller than 1GB.
Step 1: Sign up a YouTube account or Gmail account, then click the Upload button on any YouTube web page. See the figure below:
Step 2: Type in the information of your video file, including Title, Description, Category and tags. To increase the chances that your video can be easily found, you should put as much information as possible.
Step 3: Set this video to be public or private.
Step 4: Click the "Upload a video" button. When you see the next window, click the "Browse" button to select the video file you want to upload. Then click the "Upload Video" button to upload it. After the upload is finished, you will see the completion page. See the figure below:
Step 5: Click "My Videos" and you will see the video.
Know More:
1. Which Camcorders record video in .MOD type?
MOD is the video file type used on many digital camcorders, such as the JVC Everio, the Canon FS100 and the Panasonic D-Snap SD-card camcorders. Accompanying the MOD video file, there exists MOI file that stands for the index file for MOD.
2. What file types are supported by Windows Movie Maker?
You can import files with the following file name extensions into Windows Movie Maker to use in your project:
Video files: .avi, .wmv, .mpeg, .mpg., .asf, m1v, .mp2, .mp2v, .mpe, , .mpv2, and .wm.
Audio files: .mp3, .wav, wma, .mp2, .aiff, .aif, .aifc,.asf, .au,.mpa, and .snd.
Picture files:.jpeg, .jpg, .jpe, .png, .bmp, .dib, .emf, .gif, .jfif,.tif, .tiff, and .wmf
3. What file types are supported by YouTube?
YouTube accepts a wide range of video file formats.The video files below are all accepted by YouTube. Some video formats work best and are most compatible with certain computers, software or devices. Windows Media Video (.WMV)
.3GP (cell phones)
.AVI (windows)
.MOV (mac)
.MP4 (ipod/psp)
.MPEG
.FLV (adobe flash)
.SWF (shockwave flash)v
.MKV (h.264) If you do not think your current video file format is recognized by YouTube, you may get the best uploading results from converting your file to MPEG4 video with MP3 audio.

I prefer this
iPad Manager software, with the assistance of iPad Manager, you can make iPhone ringtone, connect your PC to iPad to backup iPad files to Computer directly, import computer file or folder to iPad.
Furthermore, it's easy to convert DVD/video to iPad.
This versatile iPad Manager can help you transfer videos, songs, photos from computer to iPad and from iPad to PC in fastest speed. Have a try with this tool and manage your iPad, iPod, iPhone in a much easier way.
* Convert DVD/video to iPad
* Backup iPad files to PC
* Import computer file or folder to iPad
iPod Manager
iPod Video Converter
DVD to iPhone Converter
iPod Mate

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

How do I get the Preference Training Simulation Mode to work?

I've worked with Captivate 3 for years and was required to upgrade to Captivate 4. In 4, I cannot get the Training Simulation Mode to save. I go to Edit > Preferences > REcording > Mode and select Training Simulation. Click OK. Go back into Preferences and check - Demonstation is in the Recording Mode field. I've tried everything I can think of. What can I do to correct this problem?
The main reason we use Captivate is that it captures the key strokes and provides action steps already populated in the capture. Without this feature, it will take me days rather than hours to complete my project.
Please advise as soon as possible.
Thanks, Rhazelbaker
PS> I did find a blog from another person with the same issue. The response simply defended the integrity of Captivate and did not provide concrete direction to solve the issue. I'm hoping you can provide concrete instructions.

Hi there
To bring the Library into view, click Window > Library.
Once you are seeing the Library, right-click one of the items you see there and you should see a context menu offering the ability to Select Unused Items. This will select them all. Then a simple tap of the Delete key on your keyboard should remove them.
Where are you changing the settings before you record? I ask because Captivate 4 changes the playing field substantially. Now when you begin the process the Red Recording Window looks a lot different. Similar to below.
You then have to choose the mode differently.
Does that help anything?
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

How to edit screens recorded in training mode?

Similar Messages

Maybe you are looking for