How to edit the records in error stock.

Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAP

HI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM

Similar Messages

How to edit the records value fetched by select statement query in sqldever

How to edit the records value fetched by select statement query in sqldever 2.1.1.
EX-
SELECT * FROM emp WHERE ename like 'Jaga%'
Edited by: user9372056 on Aug 31, 2010 2:16 AM

Hi,
Although some forum members may be using that tool, there is still a dedicated forum for SQL Developer.
SQL Developer
Maybe your chances are better there.
Regards
Peter

Database DLL error on editing the record selection formula?

Post Author: Aravind
CA Forum: Older Products
Hi All,I recently edited the record selection formula of an old report and since then the report is issuing me an "Error detected by database DLL" error.The report was running fine earlier and still continues to run fine if I undo the changes. Earlier, the records were selected based on a 'date' field and I edited the formula to select records based on another date field, but the report doesn't work.The report runs fine on my local PC using Crystal Reports, but web based reporting fails with the error message. The data is selected from a view and the date parameters I talked about are the fields in the same view.This view has around five date parameters and the report runs fine for all of them, except one date field.Any pointers are appreciated.Crystal reports version is 8.5. Regards,Aravind.

Post Author: DPowell
CA Forum: Older Products
Ah, yes, the good old generic date error.
The problem is likely an invalid date value in one (or all) of your records with that field. You don't say what database engine you are connected to or which driver you are using for the report, but I'll give you some "pointers".
Basically, the SQL fetch has encountered an error in your date field and the driver you are using in the report can't handle it.
A null date could cause that problem. Also a date-time field with an invalid value or truncated time value. A robust ODBC driver, like one of the Microsoft drivers might be able to overcome it. Likewise, vendors frequently release updated drivers to improve error handling just like this.
1. Analyze your data, specifically the contents of the "new" date field you are using for some kind of invalid date.
2. Experiment with different ODBC drivers by creating alternate ODBC connections to the same database using different ODBC drivers.
3. Browse and experiment with options in Crystal Reports Properties that allow you to specify data conversions for NULLs and Dates.
Good luck !

How to do the Record Level commit in DB Adapter

Hi,
I am using Oracle JDeveloper 11.1.1.6.0 and SOA server 11.1.1.6
Problem Description_
I am fetching multiple records using File Adapter in BPEL process, After Fetching I am writing those records in Database using Database Adpter.
If any error records comes the database adpater rollback the complete transaction and none of the records is inserted into the Database.
**Can anyone please tell me how to do the record level commit in Database Adapter so that All the success records can be inserted into the database except the Failure record*.*
I dont want to call the Database adpater in loop multiple times to insert each record as it hampers the performance.
Thanks in Advance
Sunil

I believe you are polling a file and inside the BPEL, inserting the records into the database using the database adapter.
so according to your requirement you can do any one of the following things...
1. Instead of using the database adapter for inserting the record, you can call a Stored Procedure which it takes the record fields as input and it inserts the record into the table and does a commit at the end. when you follow this approach, make sure your data source is defined as Non-XA, otherwise you will face some errors.
2. If you are using the database adapter insert operation only, inside the BPEL, for the partnerlink of the database adapter, go to the properties and for the property "idempotent", give a value of false.
by doing this, what happens means, after calling the database adapter from BPEL through the invoke activity, the transaction is committed and from the next activity i mean after the invoke, a new transaction will be started but it will use the same thread though
3. If you are using the database adapter insert operation only, inside the BPEL, for the partnerlink of the database adapter, go to the properties and for the property "NonBlockingInvoke", give a value of true.
by doing this, what happens means, the database adapter insert operation will happen in a separate transaction and it will be committed, inside the BPEL after the invoke activity, a new thread and transaction will be started
4. Also, if you are using the database adapter insert operation, don't follow the steps as mentioned in either 2 or 3, you can simply put a dehydrate activity after the invoke activity.
According to your requirement, all the four approaches works. But my personal feeling, don't go for 4, instead 1 is better, 2 or 3 is also good.
Hope this helps,
N

How to edit the VuGen script?

I am usng VuGen 11.0to generate script, how to edit the script to make this happen - that inserts a new record to the database when the script runs in BPM?

Yes, 'View' is read only. Get KompoZer, which is free: you can create web pages in it, or open existing pages and edit them.

How to get the records of the particluar day when delta laod failed (Urgent

Hello BW Gurus,
We are facing one serious issue. Here is the scenario.
1st time the Delta was init and for next consective two loads delta ran sucessfully... then next time delta got failed and the status is in red..... even though system started next delta loading and it has fetched the records and status is in green but not activated ,,,,,its happening still past one month so almost there are 20 requests which are to be get activatetd.
How to resolve this issue.
<b>And how to get the records of the partilcular day when the delta got failed.
</b>
Anyone have come across with this strange issue then help me out and i will rewarrd the points.
Urs,
Raki.

Hi
Can you provide more details about your extractor and data targets.
Are you loading delta to an ODS ??
If you are loading to an ODS, The only solution i can see is to get the missing delta records via FULL UPDATE. Because if you delete the error request from ODS it will also delete the 20 successful requests above it.
Cheers
Praveen
null

How to read the records from VO

hi
How to read the records from VO and after reading the records the selected records has to be save to DB thru other VO
help me out

hi,
its a custom one i am creating
Select C.Name, A.Primary_Flag, , B.Comments, B.ATTRIBUTE_CATEGORY, B.ATTRIBUTE1, B.ATTRIBUTE2
FROM XXVOC_CSD_PRIME_DIAG_CODES_B A, XXVOC_CSD_PRIME_DIAG_CODES_TL B, CSD_DIAGNOSTIC_CODES_TL C, CSD_RO_DIAGNOSTIC_CODES D
Where A. RO_DIAGNOSTIC_CODE_ID = D. RO_DIAGNOSTIC_CODE_ID
AND A. RO_DIAGNOSTIC_CODE_ID = B. RO_DIAGNOSTIC_CODE_ID
AND C.DIAGNOSTIC_CODE = D.DIAGNOSTIC_CODE
AND A.REPAIR_LINE_ID = :1
UNION
SELECT C.NAME, ‘’, ‘’, ‘’,’’,’’
FROM CSD_DIAGNOSTIC_CODES_TL C, CSD_RO_DIAGNOSTIC_CODES D
WHERE C.DIAGNOSTIC_CODE = D.DIAGNOSTIC_CODE
AND D.REPAIR_LINE_ID = :1
from above query i have to select attributes and set it in the EO based VO
Edited by: Naveenapps on Feb 22, 2009 10:36 PM

Regarding how to delete the record in internal table

Hi experts ,
how to delete the record in intarnal table after validating the data,
if record contains invalid fields?
i am giving my code see this and give me the answer?
loop at it_data into wa_data .
Validate Cost Center
    READ TABLE it_kostl INTO wa_kostl WITH KEY kostl = wa_data-kostl BINARY SEARCH.
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-004.
    ENDIF.
Validate source file material ( material number )
loop at it_mara into wa_mara .
read table it_ausp into wa_ausp with key atwrt = wa_data-i_matnr .
           if sy-subrc NE 0 .
   PERFORM update_error_log USING wa_data
                                       text-002.
delete it_data-objek .
     else.
read table it_mara into wa_mara with key matnr = wa_ausp-objek .
       if sy-subrc EQ 0 .
       wa_data-objek = wa_mara-matnr.
       wa_data-matkl = wa_mara-matkl.
     ENDIF.
     Modify it_data from wa_data .
endif.
*endloop.
Validate unit of measure (unit)
    READ TABLE it_t006 INTO wa_t006 WITH KEY msehi = wa_data-unit .
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-003.
    endif.
Validate delivery location ( storage location )
    READ TABLE it_lgort INTO wa_lgort WITH KEY del_loc = wa_data-del_loc.
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-001.
         if wa_data-flag ='x' .
      delete it_data from wa_data .
    endif.
    ENDIF.
endloop.

Hi Naren,
First get the index number of the IT_data table and store it in one variable whose declaration like this.
data: tabix type sy-tabix.
while reading the internal table it_data set the tabix variable.
tabix = sy-tabix.
Instead of the above use below one.
Delete it_data-objek
Use the Below statement it will delete the row from the internal table.
Delete it_data-objek index tabix
Thanks,
Chidanand

How to delete the record of saved HRA Details...

Hi Experts,
I have put the details of HRA Correctly.But while updating HRA In 0008 Infotype i wrongly updated the wagetype,How should i change the Wagetype.
When i m trying to delete it is showing RECORD CAN NOT BE DELETED (TIME CONSTRAINT 1).
How can delete the record.
Thanking u .
Sai

Hi
Hope doing well ........ No need to delete any infotype but u can go to PA30 and in change mode their u can delete the wagetype which is wrongly entered
Rajeshk

HOw to view the records in a structure qaqee ?

hi every one ,
we can view the tble through SE16
HOw to view the records in a structure qaqee ?
Thanks in advance

Hello,
Please check the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
You can view the struture in SE11 t-code for its components.
Regards,
Shailesh

How to edit the node value of a tree in webdynpro java

Hi ALL
I have Tree UI element where i got displayed all the nodes by calling the BAPI
Now my requirement is when i put the cursor at any node in the Tree struture then on click of insert button i need to insert the new node with the text , the user has to be option to give new text for the new node dynamically , so while adding the new node in a tree the tree has to choose the text for new node , like how to edit the node of a tree to add new text.
If any one can send the sample code on the same then it would be great help to me.
Similar requirement like in table UI Like however we are adding the new row in a table when we click on the insert button then cursor will go to that new row in a table where user can enter his details in the table.. now i am looking for the same requirement in a Tree UI element.
is it possible the same requirement in tree UI element in webdynpro for Java??
Thanks
kallki reddy

Hi kallki reddy
In general I think this is not possible in the form you'd like. It seems the Tree control is read-only thing always. It cannot provide editing capabilities.
Table is different thing. You can select within many different cell editors including Input Fields.
I guess that you scenario could be implemented not with Tree control, but with Table with Master Column. The master column allows to bring up a hierarchy into a plain table. So it's just a tree inside a table.
Here you can find further details: [TreeByNestingTableColumn API|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/92/12a74046033913e10000000a155106/content.htm]
BR, Siarhei

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

How to edit the find-and-replace dialog in Dreamweaver 8

For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
I read in the help at 'Customizing the appearance of dialog boxes' at point 4
On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
how to edit the find-and-replace dialog in Dreamweaver 8?

It's looks less like an image and more like a form drop list to me.
Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in.

How to Edit the CheckBox in Classic ALV GRID Display

Hi,
I want to Edit the checkbox in Grid Display.
I have one checkbox field in my internal Table,
Code Of the Program,
Data :
Begin of itab occurs 0,
CHK type C,
MATNR like MARA-MATNR,
end of itab.
Iam building the fieldcatelog using Merge Funcion module.
After that I am chaning the properties of the field
catelog like below,
loop at I_FCAT assigning <FCAT>.
Case <FCAT>-Fieldname
When 'CHK'.
<FCAT>-Checkbox = 'X'.
<FCAT>-INPUT = 'X'.
I dont have edit option in fieldcatelog.
modify I_FCAT from <FCAT>.
endcase.
endloop.
In the Layout,
I_LAYOUT-box_fieldname = 'CHK'.
I_LAYOUT-box_tabname = 'ITAB'.
It is displaying the Checkbox field.but I couldnt edit the checkBox.
I can able to edit in REUSE_ALV_LIST_DISPLAY.
But I have to use REUSE_ALV_GRID_DISPLAY.How to edit the checkbox.
Thanks in Advance,
Sumithra

Hi vasu,
The below procedure explains you to create a checkbox cloumn in the grid and allows you to edit i hope this will helps u.
The ALV Grid Control displays the cells of a column as checkboxes if the column is marked as a checkbox column in the field catalog.
     Add another field to the output table in which you want to display checkboxes
OR
     Define an existing field as a checkbox.
Procedure
1.     Add a field to your output table:
Data: gt_fieldcat type lvc_t_fcat.
Types: begin of gs_outtab.
Types: checkbox type c. "field for checkbox
Include structure <ABAP Dictionary structure> .
Types: end of gs_outtab.
Data: gt_outtab type gs_outtab occurs 0 with header line.
2 * Add an entry for the checkbox to the field catalog
clear ls_fcat.
ls_fcat-fieldname = 'CHECKBOX'.
* Essential: declare field as checkbox and
* mark it as editable field:
ls_fcat-checkbox = 'X'.
ls_fcat-edit = 'X'.
* do not forget to provide texts for this extra field
ls_fcat-coltext = text-f01.
ls_fcat-tooltip = text-f02.
ls_fcat-seltext = text-f03.
append ls_fcat to gt_fieldcat.
regards,
venu.

How to edit the properties.

I installed a tool in LiveCycle called "LiveCycle Workbench". I dont know how to edit the properties of Reader Extensions server and deselect [CommentsOnline] through Workbench. Please kindly advice me in detail with examples or samples.
Thanks,
Prabudass

This is the Help topic for the Apply Usage Rights operation that the Reader Extensions service provides:
http://livedocs.adobe.com/livecycle/es/wb_help/00000949.html
If you are new to LiveCycle, you should work through this tutorial to learn the basics:
http://livedocs.adobe.com/livecycle/es/wb_help/00000405.html
Scott

How to edit the records in error stock.

Similar Messages

Maybe you are looking for