How to edit SubCA duration on a Standalone AD Root CA?

I have a standalone Root CA built on 20012 R2 and also built a separate standalone Subordinate CA on 2012 R2. I have set the Root CA duration to 20 years and now want the Root CA to sign the Sub CA request file. I have done it successfully, but
the duration of the Sub CA cert is only one year. Is it possible to make a change somewhere on the standalone Root CA so that the Sub CA has a duration for, say 15 years, when it is signed by the standalone Root CA?

At first, I wouldn't make any CA with validity longer than 10 years without a reason. Technologies now changes rapidly and it is unlikely that CA certificate will live more than 10 years with current settings.
I'm assuming, root CA is Standalone CA, then on root CA you need to run the following command:
certutil -setreg ca\validityperiodunits 15
net stop certsvc && net start certsvc
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

Similar Messages

How do you edit the duration of multiple still images?

FCP X has a default duration for still images when you import them. After importing, how can I edit the duration of multiple clips?
I've tried selecting them all, control-click and change duration, but nothing changes.
BTW I want to make them 5 frames each...
thanks for any help
Craig

Thanks Tom, I've tried that. and nothing happens.
I presume that I type the 5 in the number sequence thing above the timeline?

Imovie song does not start at the beginning after I edited the duration of the clip

my imovie song does not start at the begining after I edited the duration of my clips. The audio clip now starts in the middle of the song. This is occuring with the second song in my video. How do I adjust the audio to start at the beginning of the song.

For pop ups. From your Safari menu bar click Safari > Preferences then select the Security tab.
Select: Block pop-up windows
safari starts always with top page even I have apple.com as a starting window
Back to Safari > Preferences. This time select the General tab. You can reset your homepage from there.
history its not saving or at least not showing when i press the thingy that looks like a little book on the tools bar
That icon represents your Bookmarks not history.
To view history, from your Safari menu bar click History > Show History
Or Option + Command + 2 on your keyboard.

How to change the duration of a sequence of stills all at once

Hi.
I know how to change the duration of one still, but changing the duration of many seems elusive. I've gone to the Help menu and typed "Duration." That points me to the menu where I would change the duration of one still.
Thanks for your help!
Roxane

edit:
For items already in the timeline, Select the each item in the timeline, right click and select "change speed" from the popup menu. You can not change the duration of a group of slides, only one at a time.
To change images that are already imported but not in the timeline, there are two ways to go - the brute force method and the item by item method.
Brute Force: Delete the stills from the Browser, change the duration of still setting in User Preferences>Editing to what you want, then reimport the stills. They will come in with the new duration. Changing the User Preference setting only affects stills imported after the change, it has no effect on material already in the Browser.
Item By Item: Go to the still in the Browser and change the duration for it. Right click on the time and copy it. Select the next still image time, paste the new time in, rinse and repeat. If you have a lot of stills and they are well organized (ie all in the same folder), the brute force is probably faster.
x
Message was edited by: Studio X to correct factual errors in the original post

The stills in my movie project do not respond when I try to edit their "duration" I change it the clip inspector and click done, but when I exit clip inspector , it reverts back to what it was prior to my trying to change it?

The stills in my i movie project will not allow me to edit the duration time. I change it in the clip inspector, but when I click done, it just reverts back to what it was prior to my attempt to change it?

Hi There,
I tried your workflow and some how I am not able to see your issue.
- Will it be possible for you to share your project(where-in you always see this issue) with us. You can upload your project and send the link to maanand (at the rate of ) adobe (dot) com.
- If sharing of project isn' t possible then please share the project details such as no of slides, objects etc.
-Manish
blogs.adobe.com/captivate

How to change the duration of multiple paint strokes

Hello everyone! Newbie here.
I should've set the paint properties to first frame instead of constant. Where properties of multiple clone stamps are easily modified at once, the duration shows as a percentage and so I can't figure out how to reset the duration to the first frame of the clone stamps.
I should've read the paint chapter of the After Effects manual before I made a mess but I haven't found my answer there.
I'll also appreciate any suggestions for scratches and noise removal filters.
Thank your for your help!

edit:
For items already in the timeline, Select the each item in the timeline, right click and select "change speed" from the popup menu. You can not change the duration of a group of slides, only one at a time.
To change images that are already imported but not in the timeline, there are two ways to go - the brute force method and the item by item method.
Brute Force: Delete the stills from the Browser, change the duration of still setting in User Preferences>Editing to what you want, then reimport the stills. They will come in with the new duration. Changing the User Preference setting only affects stills imported after the change, it has no effect on material already in the Browser.
Item By Item: Go to the still in the Browser and change the duration for it. Right click on the time and copy it. Select the next still image time, paste the new time in, rinse and repeat. If you have a lot of stills and they are well organized (ie all in the same folder), the brute force is probably faster.
x
Message was edited by: Studio X to correct factual errors in the original post

How to edit a PDF in Photoshop CS4

Hi there,
I'm having some real trouble trying to figure out how to edit a PDF in photoshop cs4. So i need to edit/change text, move things around, that type of thing.
I work in Windows.
Could someone give me a bit a low down on how this is done?
Much appreciated,
Victoria

You can open them but you will totally rasterize everything.
PDFs are not intended to be edited. They are a final format but as
mentioned you can use Acrobat for some minor text edits or use it to
extract the images to Photoshop for further editing.
Bob

How to edit JVC/Panasonic/Canon .mod video in Windows Movie Maker then upload to YouTube for sharing

Quick View:
Part 1: How to import .mod video to Windows Movie Maker
Part 2: How to edit the video with Windows Movie Maker
Part 3: How to upload your video to YouTube
Know More:
1. Which Camcorders record video in .MOD type?
2. What file types are supported by Windows Movie Maker?
3. What file types are supported by YouTube?
Part 1: How to import .mod video to Windows Movie Maker
Step 1: Load files
First copy the MOD file from your video camera to your hard drive, then download, install and run MOD Converter, click the "Add Files" button to browse your computer hard disc and load the MOD/TOD video files you want to convert to the program.
Step 2: Output Setting
In the bottom of the main interface, select an output format supported by Windows Movie Maker for each video file and specify a directory on your computer to save the output files.
Step 3: Start convert
Click "Start" button on right bottom of the main interface, you are allowed to start conversion.
Step 4: Import converted video to Windows Movie Maker
Click on "File". Then click on "Import". A window will appear. In the window, navigate to the video clip you converted just now. Then double click on the file. You'll see the icon for the file in your Windows Movie Maker "Collections".
Part 2: How to edit the video with Windows Movie Maker
Step 1: Add transitions and special effects
In the Movie Tasks pane, under Edit Movie, click View video transitions.
Preview transitions by double-clicking them and watching the Preview Monitor. Once you've found a transition you like, drag it from the Video Transitions pane, under Edit Movie pane to the box between two of your clips. This inserts the transition between the two clips.
Step 2: Add titles and credits
If you want to add a title before, after, or on top of a clip, click the clip on the storyboard or timeline.
In the Movie Tasks pane, under Edit Movie, click Make titles or credits.
Step 3: Add Music
In the Movie Tasks pane in Movie Maker, under Capture Video, click Import audio or music.
In the Import File dialog box, click the name of the song you want to use in the background. Then click Import. This adds your song to your collection but does not add it to your video. Drag the song from the collection to the video clip where you want the music to start playing.
Step 4: Add narration
If you have a desktop computer, connect a microphone. Microphones are available from most electronics stores. If you have a portable computer, you can use the built-in microphone. However, you will get a better-quality recording if you connect an external microphone. In Movie Maker, click the Tools menu, and then click Narrate Timeline. On the timeline, click the clip you want to narrate. You can narrate clips one at a time, or you can narrate the entire movie all at once. If you narrate individual clips, you can rearrange them later and keep your narration synchronized. If the narration is too loud or too soft in comparison to the movie, right-click the narration on your timeline, and then click Volume.
Step 5: To save your movie to your computer
In the Movie Tasks pane, under Finish Movie, click Save to my computer.
The Save Movie Wizard appears. On the Save Movie File page, type a name for your movie. You can also choose a folder to save it in by clicking the Browse button, but My Videos (the default) is usually the best place to save your movie. Then click Next. On the Movie Setting page, click Next to accept the default setting of Best quality for playback on my computer.
Movie Maker saves your movie, which might take several minutes. On the Completing the Save Movie Wizard page, click Finish. If Play movie when I click Finish was selected (it is selected by default), the movie will automatically play in Windows Media Player. Now you can watch your videos anytime by opening your My Videos folder and double-clicking your movie.
Part 3: How to upload my video to YouTube
A video file should meet the following requirements so that it can be uploaded to YouTube site.
1. In an acceptable format: WMV, MPEG4, MOV, AVI and MPEG.
2. Video length is shorter 10 minutes.
3. File size is smaller than 1GB.
Step 1: Sign up a YouTube account or Gmail account, then click the Upload button on any YouTube web page. See the figure below:
Step 2: Type in the information of your video file, including Title, Description, Category and tags. To increase the chances that your video can be easily found, you should put as much information as possible.
Step 3: Set this video to be public or private.
Step 4: Click the "Upload a video" button. When you see the next window, click the "Browse" button to select the video file you want to upload. Then click the "Upload Video" button to upload it. After the upload is finished, you will see the completion page. See the figure below:
Step 5: Click "My Videos" and you will see the video.
Know More:
1. Which Camcorders record video in .MOD type?
MOD is the video file type used on many digital camcorders, such as the JVC Everio, the Canon FS100 and the Panasonic D-Snap SD-card camcorders. Accompanying the MOD video file, there exists MOI file that stands for the index file for MOD.
2. What file types are supported by Windows Movie Maker?
You can import files with the following file name extensions into Windows Movie Maker to use in your project:
Video files: .avi, .wmv, .mpeg, .mpg., .asf, m1v, .mp2, .mp2v, .mpe, , .mpv2, and .wm.
Audio files: .mp3, .wav, wma, .mp2, .aiff, .aif, .aifc,.asf, .au,.mpa, and .snd.
Picture files:.jpeg, .jpg, .jpe, .png, .bmp, .dib, .emf, .gif, .jfif,.tif, .tiff, and .wmf
3. What file types are supported by YouTube?
YouTube accepts a wide range of video file formats.The video files below are all accepted by YouTube. Some video formats work best and are most compatible with certain computers, software or devices. Windows Media Video (.WMV)
.3GP (cell phones)
.AVI (windows)
.MOV (mac)
.MP4 (ipod/psp)
.MPEG
.FLV (adobe flash)
.SWF (shockwave flash)v
.MKV (h.264) If you do not think your current video file format is recognized by YouTube, you may get the best uploading results from converting your file to MPEG4 video with MP3 audio.

I prefer this
iPad Manager software, with the assistance of iPad Manager, you can make iPhone ringtone, connect your PC to iPad to backup iPad files to Computer directly, import computer file or folder to iPad.
Furthermore, it's easy to convert DVD/video to iPad.
This versatile iPad Manager can help you transfer videos, songs, photos from computer to iPad and from iPad to PC in fastest speed. Have a try with this tool and manage your iPad, iPod, iPhone in a much easier way.
* Convert DVD/video to iPad
* Backup iPad files to PC
* Import computer file or folder to iPad
iPod Manager
iPod Video Converter
DVD to iPhone Converter
iPod Mate

How to edit an animated GIF in CS6

I've looked all over but have yet to find a good tutorial on how to edit an existing GIF I've found on the web. What is the best way to take an existing animated GIF and add text or images on it in CS6? BTW there are lots of tutorials on how to create a gif from scratch from a video but they don't help on editing an existing GIF.

try this tutorials..
" http://www.yvelledesigneye.com/2012/05/31/cs6-photoshop-tutorials-tips-tricks/ "
" http://www.pxleyes.com/video-tutorial/photoshop/17095/Use-the-New-Timeline-in-CS6-to-Creat e-an-Animated-GIF-from-a-Video-.html "

How to edit a file

Ok I probably realise that I've missed something in the literature on installing arch somewhere along the way, but I've spent the last 3 hours trying to find how get past this stage to no avail.
I've managed to realise I have a dhcp connection.
For DHCP IP
For this option, you need the dhcpcd package (already available on most installations). To make use of it, edit /etc/rc.conf like this:
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
but when i type "edit /etc/rc.conf" I get a colon
I presume I'm in some kind of editor, but I can't see what I'm supposed to change and what commands to use inside the editor.
Any help gratefully received

bzzzz Arch is for competent Linux users - not knowing how to edit a file suggests that you do not fall into this category. If you wish to persevere and use Arch as a learning tool, then you need to be aware that you will be required to do most of the work yourself.
See the wiki: https://wiki.archlinux.org/index.php/FA … se_Arch.3F

How to edit the content.opf file of a FXL EPUB?

I'm exporting a fixed layout epub and I cannot find out where the content.opf file is and how to edit it. I'm trying to do the same thing that was done here: Indesign CC 2014 Fixed Layout export
Can anyone point me in the right direction? I've googled to no end!
Thanks,

Please follow these steps to edit your EPUB:
1. Download Sigil https://code.google.com/p/sigil/downloads/list
2. Open your EPUB in this editor.
3. In the book browser view on your left, look up for content.opf file. Edit this file and save your EPUB.
Regards,
Pooja
InDesign Engineering

How to Edit information of existing vendors

Hi All,
How to edit the information of existing suppliers using Supplier Open Interface Import Program. This information is exists in PO_VENDORS table.
I have successfully imported new Supplier with Status = NEW and now I want to edit it.
Can anyone guide/help me ?
regards
Sanjay

Hi Vik & Terry,
Thanks for your update.
I want to update Vendor Heder Information , for example, Vendor Type or Bill To & Ship To Location, and Vendor Site Information , For Example, Vendor Address.
Such task should be accomplished only thru API , not thu Form.
If you have any idea, let me know.
regards
Sanjay

How to edit a report based on Stored procedure in Deski

hi all,
We have a report based on a stored procedure in Deski format.I can see the sp name it is using under View Data >definition but cannot figure out which database or server it is pointing to .
Also ,please let me know how to edit/change the sp it is pointing to.
Thanks

Hi
When you click on View Data, at bottom click on Edit button
It will prompt a connection details tab wherein you can view and modify the connections
Nik

How to edit the records in error stock.

Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAP

HI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM

How to edit multiple regions in one Piano Roll window

I edit multiple regions in one Piano Roll window at the same time. (It is very handy way of editing especially in huge orchestra projects.)
I can see midi contents of all selected regions in Piano Roll at the same time.
1) But how to choose certain one region of many selected to edit it?
2) And how to edit all at once?
Hope the questions are clear enough.
Thanks.
Dmitriy.
iMac (27-inch, Mid 2011) 2,7 GHz Intel Core i5. 16 GB 1333 MHz DDR3.
OS X 10.10.2

First of all, the Piano Roll has two mechansim, of what it is displaying.
Selected Track: This displays all the Regions that you select in the Tracks Window
One Track: Selecting one Region in the Track Area displays all the Regions of tha tTrack in the Piano Roll. If you select multiple Regions in the Tracks Window, then the last selected Regions counts.
Whatever Regions are now displayed in the Piano Roll Editor can be edited. Select the MIDI Events and apply the command.
You can also apply edits directly to the selected Regions in the Tracks Window.
I explain all those little details in my graphically enhanced manuals ("Logic Pro X - How it Works")
One thing to be clear about:
Tracks Window: Any edit is applied to the selected Regions
Piano Roll Editor: Ay edit is applied to the selected Events
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How to edit SubCA duration on a Standalone AD Root CA?

Similar Messages

Maybe you are looking for