How to edit table frame style

I would like to know how to edit table style in front panel. For the example shown below, I would like to remove the gray color overcast frame.
I couldn't find the table style editor.
Solved!
Go to Solution.

Try using decoration frames. Find the attached vi too
Attachments:
frame.vi ‏6 KB

Similar Messages

  • Sap script '' how to create table frame in sap script"""

    i have some problem in sap script''  how to create table frame in sap script"""

    Hi,
    you can use BOX command..
    Syntax
    /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
    Effect: draws a box of the specified size at the specified position.
    Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
    1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
    Default: Values specified in the POSITION command.
    The following calculation is performed internally to determine the absolute output position of a box on the page:
    X(abs) = XORIGIN + XPOS
    Y(abs) = YORIGIN + YPOS
    2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
    3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
    4. FRAME: Thickness of frame.
    Default: 0 (no frame).
    5. INTENSITY: Grayscale of box contents as % .
    Default: 100 (full black)
    Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
    Units of measurement: The following units of measurement may be used:
    • TW (twip)
    • PT (point)
    • IN (inch)
    • MM (millimeter)
    • CM (centimeter)
    • LN (line)
    • CH (character).
    The following conversion factors apply:
    • 1 TW = 1/20 PT
    • 1 PT = 1/72 IN
    • 1 IN = 2.54 CM
    • 1 CM = 10 MM
    • 1 CH = height of a character relative to the CPI specification in the layout set header
    • 1 LN = height of a line relative to the LPI specification in the layout set header
    /: BOX FRAME 10 TW
    Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
    /: BOX INTENSITY 10
    Fills the window background with shadowing having a gray scale of 10 %.
    /: BOX HEIGHT 0 TW FRAME 10 TW
    Draws a horizontal line across the complete top edge of the window.
    /: BOX WIDTH 0 TW FRAME 10 TW
    Draws a vertical line along the complete height of the left hand edge of the window.
    /: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
    /: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
    check the fallowing link also
    http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
    Mark the points if u find it useful...
    Regards,
    Omkar.

  • How to edit a frame. Please Help!!!

    How can I edit a frame in After Effects.
    Example: I want to take out a chair that I'm seating on from the frame, how do I do that?

    Rotoscope
    Then you have to fill the hole.
    You make the fill by creating a "clean plate" or by filming one at the time of production.
    If you have no Idea what these terms mean then as Todd said in his fisrt post to the first time you asked this question, start with the basics.

  • Oracle 10g HTMLDB,.. How to EDIT TABLEs

    Hi,
    I am new to DBs. I am doing a class project on Oracle 10g HTML DB. I have created the ER Diagram but am having problems implementing it in Oracle.
    Here are the problems:
    1) Editing tables
    Currently I am using the wizard the make the tables:
    Workspace AMANSOOR>SQL Workshop>Create Table
    Now the table is created, the primary key is set, but then lets say that
    a) I have to go back and edit the table, perhaps add a cloumn etc, how do i do that.
    b) More over if I have to add a new CONSTRAINT, or TRIGGER, where do i do that,..
    I would really appreciate any help,..
    Thank you,..

    Never mind,.. i got the answer,..

  • How to Edit individual frames

    I'd like to touch up a problem in about a couple of hundred or so frames in an iMovie HD project that is otherwise complete. If it was a still, I could easily copy an adjacent region and paste it over the bad pixels in the problem area. If I could edit individual frames, I could copy the area once, and paste it into each frame.
    It doesn't seem possible in iMovie itself. I've tried downloading some third party software, including a plugin for iMovie, but none worked.
    What are the recommendations?
    Thank you

    'BTV Pro' has a feature to "average" several frames together. "..To create a noise-free image, the frame averaging feature takes a number of frames from the video input and averages them together to produce a single image. This can significantly reduce, or even eliminate, the noise in the video signal. This works because the image is constant but the noise is quickly varying so over several frames it averages to zero.."
    But perhaps the adjustment you want is more drastic. (..And I don't know if 'BTV Pro' is a 'Universal' app, so it may need to run in 'Rosetta' on a MacBook - thus making it a bit slower than usual..)
    As for other "copy and paste" movie-editing programs; 'MediaEdit Pro' (..there's a free trial download..) lets you 'paint' on video frames, but I don't know if that lets you do subtle touch-ups ..read more about it on their website.

  • How to edit videos frame-by-frame and export in H264?

    I wish to edit some videos and then export them in H264 so I can use them on a website.
    I have tried to edit with iMovie 08 but can only edit second-by-second. I want to edit frame-by-frame ie to the millisecond. And it appears that iMovie 08 does not export in H264.
    I have looked at iMovie 11 which has a Precision Editor which would work to edit as I want but for that I would have to upgrade from Leopard to Snow Leopard which I don't want. It would export H264.
    I also have QuickTime Player 7 Pro but that too seems to edit only by the second not by the frame; it does however seem to produce H264
    How can I edit these videos precisely and produce H264? Is there another application which would work better (and doesn't cost a fortune).
    Thanks for any ideas

    I want to edit frame-by-frame ie to the millisecond.
    Am a bit confused by what you say. iMovie and QT 7 Pro are both "frame" level editors. However, some forms of editing are, by their very nature, applied over a range of frames which may be a part of your problem. In addition, since "normal" movies have frames which are spaced apart in the 16 to 42 ms range, your requirement to be able to edit to the nearest millisecond would seem unreasonable and would probably be unsupported for playback purposes without skipping 90+ percent of the frames on most platforms.
    And it appears that iMovie 08 does not export in H264.
    All of the "Share" and/or "Export" options (except Final Cut XML...) either default to H.264 or allow export to H.264 (or X264 if installed) video compression.
    How can I edit these videos precisely and produce H264? Is there another application which would work better (and doesn't cost a fortune).
    Difficult to say since you have not given any indication as to what you mean by "editing" here. You could, for instance, edit normal movie clips in a normal manner and then use an application like the JES Deinterlacer to change the playback time reference to achieve an effective 1 millisecond/frame playback rate you seem to want to target even though your platform cannot play every frame during playback.

  • How to edit video frames in Premiere like in Photoshop?

    Hi all!  So I have some videos I need to edit, and I am finally breaking into Premiere, might as well right, since I have CC, and I understand it is an awesome package.
    I am learning as I go here, but as for right now, my main objective is to edit some info in the video.  What would be real useful is if Premiere had like Photoshop tools bult in, so frame by frame, or for multiple frames, I can crop out, brush or pencil something in, or paint over something.
    Real example:  I have a video that has some phone numbers + promo codes across the bottom that is outdated and I need to change it.  It runs across the bottom for about 30 seconds.  What would be IDEAL is if I could select those 30 seconds, grab a paintbrush or outline the area with the selection rectangle, delete or paint it black, and then type in the new #'s.
    I looked and couldnt find an option to do this.  So far what I have done is export the video into JPG stills, 1447 files for a 60 seconds video.  Now I dont have all kinds of hours to do this, but if desperate I will go frame by frame in PS and do that, but I am cringing at this solution.
    There has to be something else... I know Premiere had some option to add subtitles but this is actual frame by frame graphic editing.
    (Along similar lines, isnt this how old movies are converted to HD? They sharpen and edit frame by frame from the old crappy res to HD res?)
    Thanks guys............

    Thanks for your response!
    1. Luckily as for the tel/promo code, they are on a back footer bg so thats easy then... but I am a noob at Premiere, whats the easiest way to "select" the desired frame set/duration? My instinctive method would be to put that red marker at the beginning and then **** click to the end, LOL... but I would need to micormange the duration to the exact frame so.....
    2. There is a section at the very beginning where some overlaid text is fading away and I would love to get that out as well, but it IS on an iragnic background of a guy approaching a house so..... I know this may seem like a lot of work, but if absolutely necessary, is there a way, well I'm sure there is, but how do you clone out that text for like 20-30-50 frames and import them back into Premiere to export as a video file?  When you export as JPG/TIFF sequence files, edit each one, can you simply re-import them to Premiere and it will process into an AVI or whatever?
    Thanks!
    10Thanks forThanks for your response!
    1. Luckily as for the tel/promo code, they are on a back footer bg so thats easy then... but I am a noob at Premiere, whats the easiest way to "select" the desired frame set/duration? My instinctive method would be to put that red marker at the beginning and then **** click to the end, LOL... but I would need to micormange the duration to the exact frame so.....
    2. There is a section at the very beginning where some overlaid text is fading away and I would love to get that out as well, but it IS on an iragnic background of a guy approaching a house so..... I know this may seem like a lot of work, but if absolutely necessary, is there a way, well I'm sure there is, but how do you clone out that text for like 20-30-50 frames and import them back into Premiere to export as a video file?  When you export as JPG/TIFF sequence files, edit each one, can you simply re-import them to Premiere and it will process into an AVI or whatever?
    Thanks!
    Thanks for your response!
    1. Luckily as for the tel/promo code, they are on a back footer bg so thats easy then... but I am a noob at Premiere, whats the easiest way to "select" the desired frame set/duration? My instinctive method would be to put that red marker at the beginning and then **** click to the end, LOL... but I would need to micormange the duration to the exact frame so.....
    2. There is a section at the very beginning where some overlaid text is fading away and I would love to get that out as well, but it IS on an iragnic background of a guy approaching a house so..... I know this may seem like a lot of work, but if absolutely necessary, is there a way, well I'm sure there is, but how do you clone out that text for like 20-30-50 frames and import them back into Premiere to export as a video file?  When you export as JPG/TIFF sequence files, edit each one, can you simply re-import them to Premiere and it will process into an AVI or whatever?
    Thanks!

  • How to edit Table RSR_PREC_TIMEOUT

    Hello guys,
    we are using broadcaster and want to set a timeout for workbook calculation. To do this SAP recommends to enter workbook ID and the Timeout time in minutes into table RSR_PREC_TIMEOUT. In se16 i can do this to enter a value. But in Acceptance and production i cannot edit this table via se16. There are no entries for this table in acceptence and production. I wanted to transport the enry to the other systems but it does not allow me to write the entry to a transport request because the field Workbook ID is a key field but also if you leave it blank it serves like a wildcart. The timeout belongs to every workbook precalculated. And this entry i want to have also in the other systems. I can't transport it on a transport request because it says key field is missing. But it should be blank.
    Can anyone help me? Does amyone dealt with this before?
    Any help appreciated.
    Thanks and kind regards,
    Murat

    Hi ItellBasis,
    you can use Data Browser se 16 and create an entry or transaction rsprecalcadmin there is one tab also for this. Assign points if it helps.
    Thanks,
    murat

  • Creating GIF images, how do I edit all frames at once?

    Hey everyone. So I now how to make GIF images already. The problem I'm having is that I can't seem to figure out how to edit all the frames at once. I would like to brighten them up and add curves, maybe sharpen.
    I tried selecting all the layers, but then all the image editing options greyed out and weren't available.
    I really don't want to individually edit 58 frames, lol.
    Is there a way to edit all at once?
    PS - I'm using Photoshop CS3, if that helps!
    Thanks a lot!
    Mike

    amazing, you're just amazing!!
    thank you SOOOOOO much!
    take care,
    Mike

  • How to use column with linkToItem in the Basic Table view style mode

    Hi
    I have already changed a normal column that I made to a column with linkToItem as follows.
    <viewfields>
    <FieldRef Name="MyColumn" linkToItem="TRUE">
    and it worked.
    But this column works only at the default view style mode in my case.
    Does anyone know how to use linkedToItem column in the Basic Table mode?
    hope someone help me.
    thanks

    Hi,
    According to your description, my understanding is that you want to use linkToItem in the Basic Table view style.
    Per my test, in the Default style view, we need to use linkToItem=”TRUE”. However, in Basic Table style view, we need to use LinkToItem=”TRUE” instead.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • How to update table styles in the new Pages?

    Anyone found out how to update table styles in the new Pages? I see it's done in some of the templates that Apple provided, but I can't find it. Also, the Copy table style command is gone, so I can't make my tables look in a uniform way, unless I use one of the built-in styles.
    Thanks.

    I'm having the same trouble. Looks like no way to create an overal 'table' style and I cannot access the table paragraph styles either.

  • How to create an editable table in ADF 10g??

    Hi,
    I want to create a editable table using the Jdev 10g.. so that i can do read and write on the table. Can anyone tell me how i can create it...
    thanks in advance

    Hi,
    using ADF BC and ADF, one of the options when dragging a ViewObject from the data control palette is ADF Table. This creates an updateable table
    Frank

  • How to turn off "frame by frame" editing

    Please help!!!
    How to turn off this "frame by frame" editing ???
    Editing skips frame by frame...
    sorry for my english

    black69 wrote:
    At the top of the timeline appeared to line "ruler" (i had to run a command abbreviation) and i can not edit fluent materials only jumps frame by frame.
    Can you explain further?
    There does not seem to any timecode, frames or any numbers in the Timeline ruler.
    Are you zoomed in all the way?
    Al

  • How to edit a particular row in the table ctrl when a push button is clickd

    Hi Experts,
    How to edit a particular row (except the Primary keys) after selecting it in the TABLE CONTROL when a
    push button is clicked in the table control.
    For Eg. If you have a push button say "Modify", the particular row what we select in the table control should be in a
    editable mode after clicking "Modify" Push button.
    Please help me out.
    Thanks in advance.

    Hey Ram,
    Thanks a ton.
    Its working fine...sorry for the late reply.
    The reason behind the delay is because i had modified my code as per your logic it worked fine but the thing is that the whole column was in editable mode but not a single row.
    For E.g  If i want to edit a particular row, first i select the row and then  click on "Modify" button. After i click on the button, the whole column gets in a editable mode including the one which i intentionally selected.
    Here, the solution is that you have to set a flag in PBO so that once it is done with PBO then it need not come back again after we click on "Modify" button.
    And one more query is that after you modify a particular row in the table control ( When it is in editable mode) and click on the "Save" button, it is not getting updated to database.
    To update the database, we need to select the row once again after modifying it and click on the "Save" button.
    Here, database is updating only when it is selected again. If it is not selected, it is not getting updated.
    If you have any alternative solution, then please help me out.( I hope i am clear with the question.)
    Thanks,
    Ananth.

  • How to make editable Table in LabVIEW

    Hi,
    Could you please let me know how can I make an editable table. I read all the contents of the table from a spreadsheet file but I would like when I click on any of the entries in the first column I get checkboxs for all the entries in that row and after updating them the table should also automatically be updated with new values
    For example
    Let's say this is my table
    Device Name        Bit 0           Bit 1                Bit 2                   Bit 3                               Value in binary
    1                           1.bit0           1.bit1                 1.bit2             1.bit3                                    0000
    2                            2.bit0           2.bit1                 2.bit2             2.bit3                                    0000
    3                            3.bit0           3.bit1                 3.bit2             3.bit3                                    0000
    4                             4.bit0           4.bit1                 4.bit2             4.bit3                                   0000
    Now if the user click on 1, I should see 4 check boxes  for   1bit0           1.bit1                 1.bit2             1.bit3     and as soon as the user update any of them the binary value should be updates . For example if the user   enable 1.bit1 and 1.bit 3 then the binary value should become 0101
    Could you please let me know if I can I use Table control to do this and how can I do it in LabVIEW
    Thanks

    altenbach wrote:
    Why does the user even need to select a row first? Wouldnt it be sufficient to have an array of clusters, where each cluster contains a devicename string, four enums with 0,1, and a string for the value (or binary formatted numeric). Elements that don't accept inputs should be disabled, but not greyed and can be recalculated whenever needed.
    The main problem is the cosmetic fact that this will no longer resemble a table because of all the extra borders...
    ... That's why we have this idea! Go vote for it!! Thanks!
    Here's what I had in mind (LabVIEW 8.2). All you need to add is parsing your input file into the cluster structure. If the number of clusters is large, show the vertical scrollbar of the array.
    (...note that it would look much better with my above mentioned idea implemeneted! )
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    updateBits.png ‏24 KB
    UpdateBits.vi ‏16 KB

Maybe you are looking for