How to enable a secondary view on second monitor

both monitors are up  and running.  i'm seeing same info on both screens. cannot figure out how to open secondary view on additional monitor.
what am i doing wrong?
thanks

If your monitor is correctly connected to the hardware, then your operating system Win/XP  must see it. But one more step is required: activation!
So here is a small animated GIF describing that action.
http://img8.imageshack.us/img8/1317/activerecran2.gif
If this acyion is working, moving your cursor from 1 display to the other one will work.
You can start LR and click the small icon "2" in the botton left.

Similar Messages

  • How to use i pad 2 as second monitor

    does anyone know how i can use my i pad 2 as a second monitor to my mac book pro?

    You can try Air Display.
    https://itunes.apple.com/sg/app/air-display/id368158927?mt=8&ls=1

  • Before/After view on second Monitor

    It's possible to have Before/After view on the second Monitor?

    No.
    Why? You can't have develop on the second monitor anyway.

  • How do you move Mail, Preview to second monitor?

    This is probably a dumb question... I have a second monitor connected to my Macbook Pro. I can move Chrome and other programs to second monitor by dragging them there. I'm unable to drag Mail, Preview to the second monitor.....
    What am I doing wrong?

    Do you mean ---
    To a second monitor, or to a third, "grade" monitor?
    How "most" people are doing it... among the now 1.4 million licensees of FCP, I can't really comment. I don't think there are that many grade monitors in use, fewer users of even external monitors. For two-monitor setups, the use of a 2xDVI GPU is the way to go, but the video is NOT conditioned for broadcast display, at least up to this version, and not likely to change until Snow Leopard, when the 1.8/2.2 issue is rumoured to be addressed.
    The preferred method that was envisioned by the engineering team was to use an AJA or Blackmagic AV-SDI interface, so that all the up/down/cross gamma and colourspace and framerate and resolution issues could be taken care of by somebody else.
    There is a landslide of opposition to this because "proper monitors and video interfaces are too expensive". So "many" people gaff-tape and Rube-Goldberg "less expensive" solutions using computer graphics displays. They run into a lot of problems, not restricted to, for examples, an inappropriate contrast ratio, non-standard spectral response, and incompatible third-party color profiling which completely garbles the output.
    It is an extremely complex problem. At the moment only SDI is supported, FireWire will likely never happen as it doesn't have the bandwidth to be useful.
    jPo

  • How to use an iMac as a second monitor for an iMac

    I have two 21.5 inch iMac's (late 2009) and I want to use one as a second monitor for the other. I have a Mini DisplayPort to Mini DisplayPort connector but when I connect it to both computers, nothing happens. I'm not sure if I'm doing something wrong once they're plugged in or if I have the wrong cable all together. Any tips or advice would be much appreciated. Thanks

    Not going to work, the ONLY 2009 / 2010 iMacs that supported Target Display Mode were the 27" models, 21.5" models simply will not work. Please read Apple FAQ on TDM and you will see I am correct.
    Target Display Mode: Frequently Asked Questions (FAQ)
    While Neil is correct, Screen Recycler's performance is not that good so the user experience probably will not be worth it.

  • How to use an iPad as a second monitor with Bluetooth?

    I know there are several apps that will allow me to use my iPad as a second monitor over my wifi connection. But is there a way to us it over blue tooth or with a special cord?
    Thanks!

    I use a projector as a second monitor for a desk top. When the shutter is closed it is hard to minimize or exit a window. I would like to use my iPad as an additional second monitor so I can tell what I am doing.

  • How do I drag Lightroom 5 to second monitor.

    Just upgraded to lightroom 5 and can't seem to do this simple process. I'm trying to move LR to my second monitor and have PS on my main monitor.

    Hi acallah
    you can active LR in second computer. you can check this out http://www.lightroomforums.net/showthread.php?12046-Question-about-deactivating-license
    regards
    Deto

  • How to Enable Full Screen Viewing?

    Hi
    I want to upload flv files to my website. I have got it worling fine - insert media - flv - progressive download - etc. When I view the file in the testing server it does not have the option to "view in full screen" which I need as I want to keep the preview windows small and have several videos on the one page. Is there code I need to enter in addition to that generated by Dreamweaver? I'm not familiar with Flash Pro or Media Encoder but I do have access to them if t makes the whole process easier. Thanks in advance

    I know I posted this in the Flash forum but I'm not actually using Flash Pro as I don't have a 64bit computer. Dreamweaver CS5 doesn't have any skins with fullscreen options. What should I be doing to the file before uploading it? I have access to most Adobe products if you can point me in the right direction.
    Cheers

  • How to enable the List View tools tab in SharePoint Designer 2013 ?

    Customize the list view in SharePoint Designer 2013 . Unfortunately , i don't see
    List View Tools tab in my SharePoint Designer 2013. Even if i click anywhere in the web part code , i don't get it.

    Hi Hiren,
    Please try the steps below and see if it works:
    Back up the list view web part < WebPartPages:XsltListViewWebPart > you highlighted, and delete or comment this web part, then save the page.
    Reinsert the certain list view web part via INSERT ribbon, then you will see the LIST VIEW TOOLS.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • How to create a customized view in SCOM monitoring to view alerts

    Hi All,
    I am trying to create a customized view in SCOM 2012 R2 monitoring for command center team to have the alerts from Server OS, AD, Exchange and few other MPs. I understand that I can use the option "Create by Specific source" and by selecting the
    required sources but I don't want all the alerts from these sources to be listed there but only few alerts which the respective teams want it to be.
    Thanks in advance.
    Regards,
    Srini

    Hi All,
    I am trying to create a customized view in SCOM 2012 R2 monitoring for command center team to have the alerts from Server OS, AD, Exchange and few other MPs. I understand that I can use the option "Create by Specific source" and by selecting the
    required sources but I don't want all the alerts from these sources to be listed there but only few alerts which the respective teams want it to be.
    Thanks in advance.
    Regards,
    Srini
    Hi Srini,
    Based on the above requirement, You want to create a Dashboard view with Specific alerts but not all right ?
    Based on my understanding on your above requirement i created one in my SCOM. Please let me know if this is what you really wanted ?
    For the below you really need to know what are those alerts, ONLY those alerts you want to be displayed in the dashboard.
    Then Go to the Monitoring tab in SCOM and then Right click Active alerts and select New -> Select New Alert view
    When you select new alert view you will need to specify the Resolution state and the Specific alerts you want.
    In the below example i have selected "MSExchange Active sync Alert" as a example. So my goal is here such that only the alerts i have specified from my selection ( "MSExchange Active sync Alert") if it appears in New state will appear
    in this view not all other alerts.
    So for that i just used the below options:
    Resolution state & Alert name
    Resolution state = New
    Alert name = %MSExchange XXXXXXXX%
    Also as of i see there was no option for entering multiple alert names. But i think there is and i am still trying as it accepts some SQL Wild cards. So if any one has an idea what is the wild card what is to be used to mention multiple names in that Name
    view please let me know.
    Gautam.75801

  • How to enable the wide resolution on external monitor on Satellite A40-261

    Hello to all,
    I've a Satellite A40 notebook and just bought an external widescreen monitor. I only find normal resolutions in the display property box. Is it possible to expand the range with widescreen resolutions?
    Regards, Leander

    Hello guys.
    Firstly I would like to say something about the screen resolutions.
    Mostly the certain resolution is not available because the resolution is not listed in the graphic driver. In other words, if the driver doesnt support this resolution so you will be not able to choose it.
    We try to investigate a little bit:
    @BKV
    You have a Satellite M100. As you said this notebook has a ATI card installed.
    Did you check settings in the ATI catalyst? Go to the display properties and choose Advanced. There you should choose the ATI catalyst tab.
    New window should open and you should see the ATU catalyst control center.
    Check View Advanced view display option. Check this area. Maybe the resolution is available there.
    @Lea
    Your unit uses Intel graphic card but the Intel tab should be also placed in the Advanced options of graphic card properties.
    If you dont found the right resolution so I presume the driver does not support it!

  • How to resolve arrow mouse disappeared in second monitor ?

    We have a MacPro 1.1 with ATI Radeon HD 2600.
    It is not constant.
    Thanks

    If you have two displays set NOT to mirror, they are combined into one huge "extended desktop".
    The most frequent problem with a disappearing mouse cursor in that case is that the cursor has moved off the edge of one display, and over to the other display.

  • Enable Fast Web View using ODC

    Hi Friends,
    Please guide me how to enable "Fast Web View" Property to PDF which generated using Oracle Document Capture.
    Fast Web View:
    Fast Web View restructures a PDF document for page-at-a-time downloading (byte-serving) from web servers. With Fast Web View, the web server sends only the requested page, rather than the entire PDF. This is especially important with large documents that can take a long time to download from a server.
    Verify that an existing PDF is enabled for Fast Web View:
    Do one of the following:
    ■Open the PDF in Acrobat, and choose File > Properties. Look in the lower right area of the Description panel of the dialog box for the Fast Web View setting (Yes or No).
    ■(Windows only) In Windows Explorer, right-click the PDF file icon and choose Properties. Click the PDF tab and look near the bottom of the panel for the Fast Web View setting (Yes or No).
    Thanks,
    Selva

    Hi Nikhil,
    From fast Web View do you mean that your PDF is taking time in opening? If this is the case, then generally it depends on the amount of data you are displaying on the form, if your form has large number of drop downs with huge data then it will take time in displaying the form.
    Other problem may be the version of the form, Adobe 8.0.1 takes more time in opening, SAP Note 1104060 can help you if you are on version 8.
    Hope this helps,
    Amit

  • How do i adjust brightness on second monitor

    how do you adjust brightness of the second monitor ?? just upgraded the graphics board to ati radeon 5770 and added a second monitor -

    Never mind - found the answer inside the answer to someone else' question - the USB was not plugged in which provided the nice slider

  • How to enable the Exchange 2010 Admin Audit logs in Event Viewer

    How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
    - Sivashankar. Please mark as answer/useful if my contribution is helpful

    Hi Siva,
    We could execute the command below to view Administrator Audit Logging settings:
    Get-AdminAuditLogConfig
    If it is not enabled, please run the command below:
    Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
    In addition, here are some references for you to utilize this feature:
    Configure Administrator Audit Logging :
    http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
    Search the Administrator Audit Log :
    http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

Maybe you are looking for

  • My MacBook is running very slow.

    Yesterday I added a second Thunderbolt monitor. I'm not sure if it is the cause of slowness or if I have too  many programs, a virus or what. In doing research I found EtreCheck which I ran.  Here are the results.  Can anyone suggest what I need to d

  • HT4718 FileVault 2, the Recovery System, and the use of Disk Utility

    I have FileVault 2 turned on for my Lion-equipped Powerbook Pro. When booting from the Recovery System, however, the Disk Utility thereon cannot even verify the internal HD, much less repair anything. I am aware that this is due to the encryption, of

  • Is it possible to edit a file made with 8.1 for word using acrobat 9 pro??

    I have a PDF file which seems to have been created using acrobat 8.1 file maker for Word. Is it possible to edit this file using acrobat 9 pro extended and if so how do i go about this.. When i select the tools menu, no options become available and t

  • There was an error in opening this document incorrect function

    Hi, i got adobe reader pro 6, when im try to open ''some'' of my pdf, i got this error message : "there was an error in opening this document incorrect function" Can someone can help me? Thank

  • Table needs to fit full width of page

    I want to insert a table that is the full width of the page and all cells equal sized. Without dragging each column wider one by one and trying to equal them out manually, is there a quick setting I can choose in the Inspector or elsewhere to just ma