How to enable checkin/checkout process for Km documents

Hi
i created CM repository using FSDB.i connected well and i could able to see all documents.now how to make checkin/check out operation available while editing the documents.please help
prasad

Hi Prasad,
You can check out documents if Local editing is enabled. Check the following link for more info.
http://help.sap.com/saphelp_nw04/helpdata/en/3b/cbf52dde472343a5b8941dd43cc479/content.htm
Rajiv

Similar Messages

  • How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder

    How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
    Regards,
    John

    Hi,
    Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
    #http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to calculate work in process for maintenance order

    how to calculate work in process for maintenance order i.e raw materials not used

    Hi,
    Generally, when u create PR from maintenance order, account assignment category should be F. Cost of services first settles on the order when u create service entry sheet. Further it got settled onto settlement receiver given in order.
    If you want to change the category from F to K for maintenance orders then follow the IMG menu path as given below.
    Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Orders  >
    General Data > Define Account Assignment Cat. and Document Type for Purchase Requisitions

  • How to enable file size 2GB for linux RHEL4.0

    Hi
    I am on oracle 9.2.0.6 on linux RHEL 4.0. How do i enable large file size for filesystems.
    When i query ulimit -a ulimit -f it is returning me unlimited.
    But my database listener crashed as listener log file reached 2gb in size.
    I couldnt find how to enable the largefile size for the filesystem.
    Thanks
    SV

    Are you sure that the filesystem is limiting your listener log file size?
    Please try to concatenate some lines into the logfile and see if the filesystem prevents it. I expect you to find out that the limit is only with the listener.
    In any case, run a weekly/monthly job that creates an empty log file.
    If the problem is with ext3 then you should check with someone more experienced because it does not sound to me like the proper (or default) behavior of ext3.

  • HOW to enable oracle advance compression for EXIST partitioned table

    Hi All,
    I have to enable oracle advance compression for existing table which PARTITION BY RANGE then SUBPARTITION BY HASH.
    ORacle version: 11.2.0.2.0
    Please provide me any relevant doc or any exp.
    Thanks in advance.

    could not see any text for how to enable oracle advance compression for EXIST partitioned table.RTFM.
    From the resource above:
    How do I compress an existing table?
    There are multiple options available to compress existing tables. For offline compression, one could use ALTER TABLE Table_Name MOVE COMPRESS statement. A compressed copy of an existing table can be created by using CREATE TABLE Table_Name COMPRESS FOR ALL OPERATIONS AS SELECT *. For online compression, Oracle’s online redefinition utility can be used. More details for online redefinition are available here.
    "

  • How to enable OHS compression/cache for OBIEE

    Hi i have installed OHS (11.1.1.7) and webcache on OBIEE 11.1.1.7. Does any one know how to enable/configure compression/cache for OBIEE analytics? Also how to validate if compression is working?

    Hi Anke,
    all tables that have been created in V9.7 with attribute COMPRESS YES will be compressed statically .
    db2 " select count(*) , rowcompmode from syscat.tables group by rowcompmode "
    After the upgrade to 10.5 all tables created with attribute COMPRESS YES will get rowcompmode='A' but old tables created with V9.7 will stay with rowcompmode='S' .
    You can change tables from  rowcompmode='S' to rowcompmode='A' via  ALTER TABLE . After this all new pages or old pages that are touched will be adaptively compressed. But old pages that are not touched will only be static compressed. To get all pages of an existinbg table adaptive compressed you need to move data. For example with DB6CONV.
    Regards
                   Frank

  • HT3986 Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard? Many Thanks

    Hi All
    Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard - the standard wired apple keyboard works fine via this key but not the new wireless keyboard?
    Many Thanks

    Holy crap, this fixes the issue.  At least temporarily it has.  I should add that my issue was single finger forward/back swipe stopped working on the magic mouse in Firefox since Mavericks came along.  I have been fighting this since I upgraded to Mavericks a few months ago.  Thank you, tbirdvet.  You have no idea how much easier you just made using my iMac again.
    Message was edited by: wadems

  • Approval-process for publishing documents in Collaboration-Room

    Hi @ all,
    is it possible to use a approval-process for publishing documents form the private document store of a collaboration room to the public one? I it is, how I have to do it, I have no idea?!?
    Or is there a way to give specific users the right to publish a document.
    Thanks for your response!
    Best regards
    Kai

    Kai -
    I'm not sure about publishing from private to public.  However, you can set-up folders in the Collaboration rooms to enable State Management.  To do this, you'll need to use a system principal to alter the permissions on the specific Collaboration room document folder.
    Regards,
    Kyle

  • CHARM: How the user status is updated for the documents

    Hi Experts,
    I want to know how a particular status is set for a document. In the configuration, we maintain status table where in all the statuses are defined and hence the same is assigned to the document. We also make use of default method in one of the actions, such as:
    Sets user status according to container element USER_STATUS
    How a status is set for each action in the action list? Do we pass any value to the above mentioned method so that it can set the same?
    If I am not wrong, this default method simply sets the user status according to the value available in USER_STATUS (as per the description of the method). But, where we are setting this variable/element?
    May any one please help me understand this? Your help will be highly appreciated.
    Regards,
    Faisal

    Hi Faisal,
          I dont know if I get your question very well, but in transaction SPPFDCADM you cant control this method. For example, select CRM_ORDER, then "Define Action Profile and Actions", select "SDHF Actions" , then "Action Definition", select "IN PROCESS", then "Processing type", there if you hit "Display definition" you will see the parameter this action is sending to the method (the parameter is the user status to be set).
    Hope that helps,
    Federico

  • How do I find the URL for a document loaded into Buzzword?

    How do I find the URL for a document loaded into Buzzword?

    What kind of document? What is Buzzword?

  • Post order processing for sales document is not yet complete

    hi,
    sap gurus,
    i am facing the error while saving the sales order and this ticket is unique and it is saying that
    "post order processing for sales document is not yet complete".
    please help me in this regard.
    and it is blocking the order for further processing.
    regards,
    balajit

    I dont think this is a standard error message.  Some exit is applied for sale order to meet some requirements.  You need to check with your ABAPer.
    In fact, you can conclude yourself based on the error message number.  If it starts with Z, then the above holds good.
    thanks
    G. Lakshmipathi

  • How to see the change logs for billing document

    Dears,
    Could you please how to see the change logs for billing document.
    My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
    Thanks in advance
    Ranjan

    hello, friend.
    you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes.  try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
    normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document,  as saving the document after creation will post this to Accounting.  of course, inclusion of a posting block in the billing type will provide you the opportunity for changes. 
    regards.

  • How to obtain the default serie for a document

    Hi,
        Anybody know how can obtain the default serie for a document throw a query??
    I can`t see the relation between the ONNM and the NNM1 tables because the 'dfltseries' field of the ONNM not corresponding with the 'Series' field of the NNM1.
    For example for an A/P Invoice
    Thanks!!

    Hi Mariano,
    According to the SDK Help file, you need to query the NNM2 table
    Series Default
    Table name: NNM2
    ObjectCode     UserSign     Series     DocSubType
    So, the query to retrieve the A/P default series for the manager user would be:
    SELECT T0.Series FROM [dbo].[nnm2] T0 WHERE T0.ObjectCode='13' AND T0.UserSign = 1
    From the SDK you can replace the T0.UserSign = 1 for T0.UserSign = oCompany.UserSignature to retrieve the default series for the current user...
    Regards,
    Vítor Vieira

  • How to: Enable CUDA GPU Support for "Unsupported Cards" in CS6 (same process as in CS5+)  :) for MAC

    Hi all, I previously was involved in some discussion regarding GPU acceleration with CUDA in Premier Pro CS5 using an 'Unsupported card' with my Macbook Pro... I would like to show you this still works and will be here to show the process for anyone, and will post a video of the whole thing as a step-by-step probably tomorrow (its quite late where i am just now) but I'll give you a quick run through just now... Proof at bottom of page...
    Ps. This only applies to Nvidia card Macs.. I have no ATI card mac to try this out as OpenCL etc but i would imagine it would be a similar process...
    Step 1... Install Cuda drivers for your Mac (im using 4.2.7) here   http://www.nvidia.com/object/mac-driver-archive.html
    Step 2... Install GfxCardStatus and force your graphics (if using a laptop) to discrete card only   http://codykrieger.com/gfxCardStatus
    Step 3... Open Terminal... and run GpuSniffer... path as follows for original default installation directory, copy and paste then hit enter or change as required
                  /Applications/Adobe\ Premiere\ Pro\ CS6/Adobe\ Premiere\ Pro\ CS6.app/Contents/GPUSniffer.app/Contents/MacOS/GPUSniffer 
    This should give you an output as follows, while it may differ this is my output...
    --- OpenGL Info ---
    2012-05-02 01:00:28.642 GPUSniffer[6661:2403] invalid drawable
    Vendor: NVIDIA Corporation
    Renderer: NVIDIA GeForce GT 330M OpenGL Engine
    OpenGL Version: 2.1 NVIDIA-7.18.11
    GLSL Version: 1.20
    Monitors: 2
    Monitor 0 properties -
       Size: (0, 0, 1920, 1080)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 1
       Shaders 422: 1
       Shaders 420: 1
    2012-05-02 01:00:28.666 GPUSniffer[6661:2403] invalid drawable
    Monitor 1 properties -
       Size: (0, -1200, 1920, 1200)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 1
       Shaders 422: 1
       Shaders 420: 1
    --- GPU Computation Info ---
    Found 2 devices supporting GPU computation.
    CUDA Device 0 -
       Name: GeForce GT 330M
       Capability: 1.2
       Driver: 4.02
       Total Video Memory: 511MB
    OpenCL Device 1 -
       Name: GeForce GT 330M
       Capability: 1.1
       Driver: 1
       Total Video Memory: 512MB
       Not chosen because it did not match the named list of cards
    Step 4... Using the name of your card from the above output, i have it underlined, in my case a GeForce GT 330M, copy this exact name as we will now add it to the list of supported cards...
    Step 5... Using terminal still, again assuming default install directories, copy and paste then hit enter on the following...
                 sudo nano /Applications/Adobe\ Premiere\ Pro\ CS6/Adobe\ Premiere\ Pro\ CS6.app/Contents/cuda_supported_cards.txt
    You will then be asked for your computer password, type it and hit enter, it will not be shown as you type FYI... You will then see the default supported cards, add your card by pasting the name you have as in Step 4, then use ctrl+x to escape, type Y to save and hit enter a couple of times to get out...
    You should now be able to run Premier Pro CS6 using the CUDA GPU option you can select in Renderer as you start a new project!!
    Any questions i will try to answer them as soon as possible, and as i said i'll screen capture and record a video tutorial as i know that would be of help to some of you out there.. Some proof, here is a pic...
    PS. It is a full 1080 pic so it is quite large...
    Message was edited by: StuCS5 - Changed Font Size

    Very usefull! it worked perfectly on premiere cs6 on my macbook pro 2.8ghz with geforce gt 330m, Any suggestion for enabling ray traced 3d also in after effect? I inserted the  geforce gt 330m on the after effect card list, but when i enable ray traced 3d the text in the comp disappear!
    thanks!

  • Solution Directory - How to lock a business process for a implement project

    We have Solution Directory assigned to a maintenance project and I understand the checkout/checkin process and how it locks the business process in the Solution.   What is the best practice when  you are starting a new IMPLEMENTATION project that will impact existing business processes that are in the Solution?  I know that I can copy from the solution to build the new project, but it doesnu2019t lock the BP from the solution.  
    I have a new Implementation project, that i want to checkout/pull existing business processes for the Solution Directory. 
    *How can these Business Processes be "locked" in Solution Directory as they are with a Maintenance project?*

    Kelly,
    You would use the maintenance project to make daily modifications.
    Consider the case of a O2C business scenario. You need to almost make daily configs etc, which get pushed through, such things will go into a maintenance project.
    But if you plan to enhance O2C with a CRM front end or include a better planning solution or TPM or something, then you are looking at an implementation project.
    Rule of thumb. Short Scale changes : Maintenance Project, Long term/major enhancements : Implementation Projects.
    Also In this case to speak about the lock down. Well the Solution Directory kind of takes care of that for you.
    I am assuming that you have a solution populated with business processes. So now if you want to enhance it with a new functionality, you would use an implementation project. So when you define the implementation project, and then navigate to Solar01, and try to add business scenarios , ensure that on the Structure tab you select the Solution as the source. This ensures you are copying content from your current, updated, productive solution. Once you do that, the implementation continues on its track, whilst daily support processes are managed with the check-in / check-out functionality of the Solution and the Maintenance Project.
    You technically do not need to lock the business processes down, since the Compare and Adjust functionality of a solution will help you identify the deltas  between the Solution and the implementation project and you can always make those adjustments post go-live and thus just update the Solution at one shot. Also remember that with SolMan 7.1 the Compare and Adjust functions can be used with Template, Implementation and Solutions in any permutation-combination.
    Hope this helps.
    Plz let me know if you need any additional information
    Cheers!!

Maybe you are looking for