How to enable CRL checking

Hi All.
How I avoid that certificate with
expired CRL can be used to sign
files WORD.
I downloaded the OCT for office 2013, I enabled the policy "Do not Allow expired certification when validating signatures" but it is no working.
please help me.

This policy setting lets you configure whether Office 2013 applications accept expired digital certificates when verifying digital signatures and it might not be useful for this case.
I am finding a way to monitor whether or how often Word application requests for certificate from CA/CRL. In you site, please also try to enable
certificate utility and remove the certain certificate to check the result.
Open CMD and type "certutil - deleterow -cert <date>"
If there is any update, feel free to post back.
More information about Certificate Services:
http://technet.microsoft.com/en-us/library/cc785163(v=ws.10).aspx
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Similar Messages

SaaS Sharepoint, ADFS claims and internal AD-CA: How to disable CRL check in Sharepoint?

Hi all,
We have an external SaaS provider with a Sharepoint 2010 server. In our AD, there is an ADFS server providing ADFS claims to Sharepoint and thus giving SSO functionality. For the ADFS service and its token-signing and encrypting, there is one certificate
drawn from an internal AD Enterprise CA server.
The problem is that, when the company user opens the Sharepoint URL, it is extreamly slow to open, however it does eventualy open. The SaaS provider has indicated its an issue with the CRL checking. I know on other Microsoft products there are ways to disable
CRL checking but haven't found such information for sharepoint.
We have provided the CRL files and the provider has added these and for as long as they are valid things work as expected. However the CRL then expires and we are back to square one.
Can anyone help?
I have found this question has been asked before here:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/431bae5c-c502-4723-9de7-663abd46658e/saas-sharepoint-adfs-claims-and-internal-adca-how-to-disable-crl-check-in-sharepoint?forum=sharepointgeneralprevious
Unfortunately the answer doesn't satisfy my situation. Also not sure I agree that self signed certificates should be used and it's quite a topic for debate in ADFS circles... However in my situation we don't have the option to change ADFS to use self signed
certificates as the ADFS service is in use with 12+ other service providers all who have no issue using the Token Signing Certificate even though they cant access the CRL either.
Thanks for your help,
James

Hi,
As I understand, you want to disable CRL check in SharePoint.
There are four workarounds:
1. Give your servers an outbound Internet connection
2. Edit the hosts file at “%SYSTEMROOT%\\System32\\drivers\\etc\\hosts” to fool the CRL check into thinking your local machine is crl.microsoft.com by pointing it at 127.0.0.1 (localhost).
3. Edit the registry to disable CRL checking by setting the State DWORD to 146944 decimal (SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\WinTrust\\Trust Providers\\Software Publishing for both HKEY_USERS\\.DEFAULT and HKEY_CURRENT_USER) PowerShell.
4. Edit the machine.configs and disable it there.
The article gives you the details about the four workaround.
More reference:
http://basementjack.com/uncategorized/powershell-script-to-disable-certificate-revocation-list-crl/
https://kb4sp.wordpress.com/2013/10/08/certificate-revocation-list-disable-check/
Best regards,
Sara Fan

How to enable a check box using the table LVC_S_FCAT

hi,
I am working on reports. I have to have a check box and i am using the table LVC_S_FCAT to get the check box, i am getting the check box. how to enable it.

Hi Preethi,
try to set default the check-box with the
value '0', '1', '-', ' ' and 'X' (0/1 -> only display,
'-' field is not shown, ' ' and 'X' is normal)
and see the differences.
Hope it helps.
Regards, Dieter
Sorry, i thought you meen enable not editable.
Message was edited by: Dieter Gröhn

How to enable the check box using cl_salv_table?

Hi Experts,
             what code will change for to enable the check box in the following Report program?
REPORT ZMA_ALV_OOPS2.
TABLES:MARA.
TYPES:BEGIN OF T_MARA,
      SEL   TYPE C,
      MATNR TYPE MARA-MATNR,
      WERKS TYPE MARC-WERKS,
      LGORT TYPE MARD-LGORT,
      LABST TYPE MARD-LABST,
     END OF T_MARA.
DATA:TB_MARA TYPE STANDARD TABLE OF T_MARA,
     WA_MARA TYPE T_MARA.
DATA: GR_TABLE TYPE REF     TO CL_SALV_TABLE.
DATA: GR_FUNCTIONS TYPE REF TO CL_SALV_FUNCTIONS.
DATA: GR_DISPLAY TYPE REF   TO CL_SALV_DISPLAY_SETTINGS.
DATA: GR_COLUMNS TYPE REF   TO CL_SALV_COLUMNS_TABLE.
DATA: GR_COLUMN TYPE REF    TO CL_SALV_COLUMN_TABLE.
DATA: GR_SORTS TYPE REF     TO CL_SALV_SORTS.
DATA: GR_AGG TYPE REF       TO CL_SALV_AGGREGATIONS.
DATA: GR_FILTER TYPE REF    TO CL_SALV_FILTERS.
DATA: GR_LAYOUT TYPE REF    TO CL_SALV_LAYOUT.
DATA: GR_PRINT TYPE REF     TO CL_SALV_PRINT.
DATA: GR_SELE TYPE REF      TO CL_SALV_SELECTIONS.
DATA: GC_TRUE TYPE SAP_BOOL VALUE 'X'.
DATA: GR_ITEM TYPE REF      TO CL_SALV_ITEM.
DATA: COLUMNNAME TYPE REF TO LVC_FNAME.
top of list for CCL
DATA: GR_CONTENT_CCL TYPE REF TO CL_SALV_FORM_ELEMENT.
DATA: GR_COL TYPE REF TO CL_SALV_COLUMN.
DATA: LT_SORT TYPE SALV_T_SORT_REF,
        LS_SORT TYPE SALV_S_SORT_REF,
        L_SEQUENCE TYPE SALV_DE_SORT_SEQUENCE,
        T_SORT TYPE REF TO SALV_T_SORT_REF.
DATA: KEY TYPE SALV_S_LAYOUT_KEY.
DATA: COLOR TYPE LVC_S_COLO.
DATA: GR_EVENTS TYPE REF TO CL_SALV_EVENTS_TABLE.
DATA: GR_SELECTIONS TYPE REF TO CL_SALV_SELECTIONS.
**--Selection screen
SELECT-OPTIONS:S_MATNR FOR MARA-MATNR.
SELECT MATNR WERKS LGORT LABST
         FROM MARD
         INTO CORRESPONDING FIELDS OF TABLE TB_MARA
         WHERE MATNR IN S_MATNR.
TRY.
      CALL METHOD CL_SALV_TABLE=>FACTORY
        IMPORTING
          R_SALV_TABLE = GR_TABLE
        CHANGING
          T_TABLE      = TB_MARA.
    CATCH CX_SALV_MSG.
ENDTRY.
GR_TABLE->SET_SCREEN_STATUS(
              PFSTATUS = 'SALV_TABLE_STANDARD'
              REPORT = SY-REPID
              SET_FUNCTIONS = GR_TABLE->C_FUNCTIONS_ALL ).
GR_FUNCTIONS = GR_TABLE->GET_FUNCTIONS( ).
GR_FUNCTIONS->SET_ALL( ABAP_TRUE ).
GR_DISPLAY = GR_TABLE->GET_DISPLAY_SETTINGS( ).
GR_SELE = GR_TABLE->GET_SELECTIONS( ).
GR_SELE->SET_SELECTION_MODE( ).
GR_TABLE->SET_TOP_OF_LIST( GR_CONTENT_CCL ).
*--- To change the column headings
GR_COLUMNS = GR_TABLE->GET_COLUMNS( ).
GR_COLUMNS->SET_OPTIMIZE( GC_TRUE ).
GR_SORTS = GR_TABLE->GET_SORTS( ).
TRY.
      GR_COLUMN ?= GR_COLUMNS->GET_COLUMN( 'SEL' ) .
      GR_COLUMN->SET_CELL_TYPE( IF_SALV_C_CELL_TYPE=>CHECKBOX ).
      GR_COLUMN->SET_LONG_TEXT( 'CHECKBOX' ).
    CATCH CX_SALV_NOT_FOUND.
ENDTRY.
GR_COLUMN->SET_CELL_TYPE( 6 ).
GR_COLUMN->SET_SHORT_TEXT( 'Check Box' ).
GR_COLUMN->SET_LONG_TEXT( 'Check Box' ).
******Check box edit
TRY.
      GR_SORTS->ADD_SORT( COLUMNNAME = 'MATNR' SEQUENCE =
      IF_SALV_C_SORT=>SORT_UP ).
    CATCH CX_SALV_DATA_ERROR
          CX_SALV_NOT_FOUND
          CX_SALV_EXISTING.
ENDTRY.
GR_LAYOUT = GR_TABLE->GET_LAYOUT( ).
KEY-REPORT = SY-REPID.
GR_LAYOUT->SET_KEY( KEY ).
GR_LAYOUT->SET_SAVE_RESTRICTION( CL_SALV_LAYOUT=>RESTRICT_NONE ).
TRY.
      GR_COLUMN ?= GR_COLUMNS->GET_COLUMN( 'MATNR' ).
    CATCH CX_SALV_NOT_FOUND.
ENDTRY.
COLOR-COL = '8'.
COLOR-INT = '0'.
COLOR-INV = '1'.
GR_COLUMN->SET_COLOR( COLOR ).
GR_TABLE->DISPLAY( ).
Thanks,
Mahesh.

Hi,
You can use the method set_selection_mode to automatically show the checkbox for each row..and use the method get_selected_rows to get the rows selected..
Check this sample report..
TYPES: BEGIN OF type_output,
         matnr TYPE matnr,
       END OF type_output.
DATA:lt_output   TYPE STANDARD TABLE OF type_output,
     lwa_rows    TYPE int4,
     lwa_output TYPE type_output,
     lt_rows     TYPE salv_t_row.
* Local declarations.
DATA: lr_table      TYPE REF TO cl_salv_table,
      lr_selections TYPE REF TO cl_salv_selections.
DATA: lr_columns    TYPE REF TO cl_salv_columns_table.
START-OF-SELECTION.
* Prepare data.
lwa_output-matnr = 'TEST1'.APPEND lwa_output TO lt_output.
lwa_output-matnr = 'TEST2'.APPEND lwa_output TO lt_output.
lwa_output-matnr = 'TEST3'.APPEND lwa_output TO lt_output.
* Call the factory method
TRY.
      cl_salv_table=>factory(
        EXPORTING
          list_display = 'X'
        IMPORTING
          r_salv_table = lr_table
        CHANGING
          t_table      = lt_output ).
    CATCH cx_salv_msg.                                  "#EC NO_HANDLER
ENDTRY.
* Column selection
lr_selections = lr_table->get_selections( ).
lr_selections->set_selection_mode( if_salv_c_selection_mode=>row_column ).
lr_columns = lr_table->get_columns( ).
lr_columns->set_optimize( abap_true ).
* Display
lr_table->display( ).
* Get the selected rows.
lt_rows = lr_selections->get_selected_rows( ).
* Display the selected rows.
LOOP AT lt_rows INTO lwa_rows.
    READ TABLE lt_output INTO lwa_output INDEX lwa_rows.
    WRITE: / lwa_output-matnr.
ENDLOOP.
Thanks
Naren

How to enable multiple check-out and check-in for offline editing (sharepoint 2010)

I have a SharePoint site where I am using check-in check out feature for one of 'Project' document library.
By default SharePoint supports single document to be checkout for offline editing (when i click on checkout, SP ask for 'Use local draft option' for offline editing), if I select that check box, it take a local copy for offline editing in my 'SharePoint
Draft' folder.
but when I try to check-out multiple files from 'Project' document library, it does not show any form for confirmation, as shown above (use 'Local draft option') and files get checked out on server it self, but I didn't find any local copy in 'SharePoint
Draft' folder. mean sharepoint does not support multiple file check-out feature for offline editing.
Please suggest if we can check out multiple files for offline editing in sharepoint 2010.
Thanks

Sagar, Thanks for reply, but none of the link is useful.
These all links talk about the check-in check-out feature, but my issue is that, when I do select multiple files for checkout Draft’s dialog
box does not appear and offline copy of files is does not created. how to fix that issue.

How to enable/disable check boxes in a table.

hi Gurus,
i am new to webdynpro for abap.
the problem i have is.
i have a table with two columns. first one is a check box column and the second one is a value field. the table is populated with data(second field only) upon pressing some button.
while populating data i want to make check box field/row ticked and disabled when second field row value is 'X' . if not leave the check box row/field enabled and unticked ( if i want i can tick the check box later). hope you guys me. this is sort of urgent. please reply with some code.
thanks in advance.
Sree

Hi
Issue what i am facing is,i want to display column of CHECKBOXes in my ALV.
for that i declare atrribute of type CHECKBOX.
And i write the following code.
lr_column_settings ?= l_value.
lt_columns = lr_column_settings->get_columns( ).
loop over table - in each loop another column can be modified
LOOP AT lt_columns INTO ls_column.
IF ls_column-id = 'CHK_BOX'.
CREATE OBJECT lr_chk_box
EXPORTING
checked_fieldname = ls_column-id.
lr_chk_box->set_read_only( ABAP_FALSE ).
lr_chk_box->set_read_only_fieldname( 'ALV_FINAL_STATUS' ).
ls_column-r_column->set_cell_editor( lr_chk_box ).
even i cant able to get checkbox in my ALV.
IT is displaying as general field.
Regards,
Ravi

How can I enable spell checking for a text box that is just one line, e.g. subject in e-mail?

In a prior version of Firefox I found a website somewhere that told me what to do to enable spell checking for text boxes that are just one line. I got used to being able to send an e-mail with a Subject Line that didn't have a misspelling. Now it doesn't work. Please tell me how I can enable that again. I am on a Mac using Firefox 6.0.2. Thanks!

See:
*http://kb.mozillazine.org/Spell_checking
*http://kb.mozillazine.org/layout.spellcheckDefault
You can set the pref layout.spellcheckDefault to 2 on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default or changed via the right-click context menu.

I am trying to scan a check to deposit in my bank account. The scanner message asks me to enable cookies. I cannot figure out how to enable cookies. Can anyone tell me how to do this?

I am trying to scan a check to deposit in my bank account. The scanner is asking me to enable cookies. I cannot figure out how to do this. Can anyone tell me how to enable cookies?

Hello sharon139.
In Safari, click on Safari in the upper left of your screen and then click on Preferences. Go to the Security tab...... see below. Select either Never or From third parties...... That should do it.

How to enable check number from manual entry to auto running?

Hi,
Does anyone knows how to enable auto running of check number (in outgoing payment) for a particular bank account?
I had tried to set it in Administration -> Setup -> Banking -> House Bank Account. In the "Next Check Number" field, i have set a check number. However, when I create a outgoing payment, in the payment means -> check tab, i select the bank and account code, the check number doesn't auto-default to next number.
Thanks!
sianghing

Hi
check this out and find your solution,
Outgoing Payment- Check
In outgoing payment when cheque number issue ..
gud luck
RIYAZ

How to enable excel downloading in ALV grid report.

Hi all,
How to enable excal downing in ALV grid report?
Thanks in Advance.
Siva Sankar.

hi
check the following code
Example of a Simple ALV Grid Report
REPORT ZTUFI091 .
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic requirement for this demo is to display a number of *
*& fields from the EKKO table. *
*REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
 wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
 gd_tab_group type slis_t_sp_group_alv,
 gd_layout type slis_layout_alv,
 gd_repid like sy-repid,
 gt_events type slis_t_event,
 gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
 Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
 I.e. Field type may be required in-order for
 the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
 Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
 "click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
 Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = gd_repid
 i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
 i_callback_user_command = 'USER_COMMAND'
 i_grid_title = outtext
 is_layout = gd_layout
 it_fieldcat = fieldcatalog[]
 it_special_groups = gd_tabgroup
 it_events = gt_events
 is_print = gd_prntparams
 i_save = 'X'
 is_variant = z_template
 tables
 t_outtab = it_ekko
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
 Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
 wa_header type slis_listheader,
 t_line like wa_header-info,
 ld_lines type i,
 ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
 sy-datum+4(2) '.'
 sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
 into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
 exporting
 it_list_commentary = t_header.
 i_logo = 'Z_LOGO'.
endform.
 FORM USER_COMMAND *
 --> R_UCOMM *
 --> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
 WHEN '&IC1'.
Check field clicked on within ALVgrid report
 IF rs_selfield-fieldname = 'EBELN'.
 Read data table, using index of row user clicked on
 READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
 Set parameter ID for transaction screen field
 SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
 Sxecute transaction ME23N, and skip initial data entry screen
 CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
 ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
 Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
 exporting
 i_list_type = 0
 importing
 et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
 into ls_event.
if sy-subrc = 0.
 move 'END_OF_PAGE' to ls_event-form.
 append ls_event to gt_events.
endif.
 read table gt_events with key name = slis_ev_end_of_list
 into ls_event.
if sy-subrc = 0.
 move 'END_OF_LIST' to ls_event-form.
 append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
 Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
 ld_pagepos(10) type c,
 ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
 ld_pagepos(10) type c,
 ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
hope it will help you
regards
sreelatha gullapalli

How to Enable MMS without BIS

How to enable MMS without BIS
This guide is for you if:
you have an BlackBBerry OS 7 device on a regular (non-BIS) data plan
and
2. you cannot send MMS (multimedia) messages.
Getting MMS working requires you to split, hex edit, merge and install service books, so read through the instructions and decide whether you’re up to it. I’ve attempted to explain everything as clearly as possible, but it’s a complex process and requires you to follow instructions carefully.
It's worth asking your carrier if they can just enable MMS for you. If they can and will, you don't need this guide.
Notes:
The process described here may also work on earlier devices with OS 4, 5, and 6, but I don’t have those devices to test.
Many carriers require you to have a data plan in order to send MMS messages. If you don’t have one, this guide may not help you.
Depending on your cellular plan, sending MMS messages may involve extra charges.
Preparation: Before You Get Started
Software
First, you need some tools to do the work. Download and install these three programs on your computer:
MagicBerry 3.5 (here)
A Hex editor (I like HxD, here)
BlackBerry Desktop (link)
Service Books
You will also need a copy of the service books attached to post #1 in this thread over at CrackBerry. Extract the contents of the .zip file to a location of your choice.
MMS Configuration Information
Once you have the tools and service books, you need to get the MMS configuration information from your cellular carrier.
Specifically, you need three settings: MMS Proxy, MMSC, and APN. Search on Google for something like, “MMS settings for [insert your cellular carrier’s name here]” and you should find them. Note that you also need the port number for the MMS Proxy. It should be there on the settings page.
Note: if the port number for your MMS Proxy is in the 9000s, this process probably won’t work, since your cell carrier may be using the older WAP 1.2 specification. If anyone runs across this, let me know, and I’ll try to help you out.
A Note on MagicBerry
MagicBerry is an .ipd file editor. Service books, like the ones responsible for MMS, are .ipd files. The logical conclusion would be that you could edit service books with MagicBerry. But MagicBerry only shows you certain pre-set fields within the .ipd file. As a result, you can't see or edit a lot of the information in the service book. Even worse, if you do edit a service book file with MagicBerry, that unseen information is not saved, so you end up deleting it and rendering the service book useless.
MagicBerry does have good uses, though: it splits and merges service book files perfectly. In fact, it is the best tool for splitting and merging service books, which is why you downloaded a copy.
Due to MagicBerry’s limitations, you’re going to edit the files with the hex editor.
Let’s get started!
The MMS How-to Guide
Step 1: Split the .ipd Files
Start MagicBerry, click File > Open, and open the tmo_servicebooks.ipd file.
Click Manipulate > Split.
Tick the box for the MMS Config 2.0 file.
Press “Split Selected,” enter a file name (and select a directory, so you know where the file is being saved), and press “Save.” Name the file “MMS_Config_20” so that you easily recognize it.
Note: there are "MMS Config" and "MMS Config 2.0" service books in the tmo_servicebooks.ipd file. Make sure you select the 2.0 version.
Step 2: Hex Edit the MMS Config 2.0 File
Now, start your hex editor and open the “MMS_Config_20.ipd” file. It will look like this, without the highlights and bolding. I’ve added those so that it will be easier to provide instructions on editing.
Hex Editing Basics
In the HEX editor, the blue numbers don’t matter to you (they’re just column and row labels). Only the black ones are part of the file.
The bytes (the two-character pairs) on the left side are all numbers, expressed in hexadecimal or “base-16”. The same information is expressed in ANSI characters on the right side.
The basics of hexadecimal numbering are that you count as follows:
Base-16 (hexadecimal): 1 2 3 4 5 6 7 8 9 A B C D E F 10
Base-10 (decimal): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
So in the two-character byte pair, 0D = 13, 1F = 31, 50 = 80, etc. If you can figure out those conversions, you’re good. If not, google hexadecimal numbering, and spend some time at a lesson. You need to understand how hex works to do this. There are also decimal to hexadecimal converters online. Use them to check your work, or to do the conversion work for you.
You can edit the file from either side of the hex editor. As you edit the information on one side, you’ll see it automatically changing on the other as well.
It’s easier to edit the information in the green, turquoise, and red fields on the right side.
The information in the grey, yellow, and pink fields must be edited from the left (hex) side, because it’s the hex value that matters, and it shows up as periods or jibberish on the right side. All those “dots” on the right side are not identical when you look over at the left side. They’re actually very different values. The nonsensical letters on the right side are likewise meaningful values on the left side.
It’s not a bad idea to just spend some time playing around in the hex editor before you move on. When you’re done, close the file without saving it, and the changes you make while experimenting won’t be made permanent.
Editing the File
The green blocks: enter your MMS proxy in each one, with the port number following the colon. Add to or delete bytes from the highlighted field if necessary, but whatever you do, do not write over or delete bytes outside the highlighted field! Those bytes contain necessary information, and if they are not there, the service book will not work. The same rule holds true for all of the other edits. You must stay within the highlighted fields. To delete bytes, just press delete. To insert bytes, position the cursor, and go to Edit > Insert Bytes on the menu bar, and choose the number of bytes to insert. If you’re using HxD hex editor, ctrl-z will undo a mistake. It also makes your changes in red, which makes them a little easier to follow. As with all programming, the work has to be perfect. There can be no mistakes. Check everything you do carefully.
The turquoise block: enter the MMSC address here.
The red block: enter your APN here.
The yellow blocks: total number of bytes in the highlighted green, turquoise, or red range that follows. Adjust it when you’ve finished editing. The number must be expressed in HEX of course. Use a decimal to hexadecimal converter online if you prefer that.
The pink blocks: the total number of bytes in the bolded range that follow (again, in hex). Adjust it when you’re finished editing the field.
The grey block: a count of the total number of bytes that follow it. In the original file, the value is 30 01 00 00, which breaks down as: 30(hex)=48 01(hex)=256. The total (48+256) is 304. If the number of bytes following the grey block was less than 256, there would be no 01 in the second place. For example, if there were 226 bytes following the block, the grey block would look like this: E2 00 00 00. When you are finished editing the entire file, go back and adjust the number in the grey block accordingly.
Once you’re done, save the file.
Step 3: Merge the MMS Config 2.0 and Wap Push Config Service Books
Open the “MMS_Config_20.ipd” file in MagicBerry
Once you’ve opened the file, click Manipulate > Merge.
Tick the box for the MMS Config 2.0 file.
On the right side of the “Merge” window, where it says, “Choose second IPD file,” press the button with the three dots.
Choose the tmo_servicebooks.ipd file.
Tick only the box for the “Wap Push Config” service book.
Press “Merge Selected,” enter a file name (and select the directory if necessary), and press “Save.”
Close MagicBerry
Step 4: Backup Your Phone
This is mandatory. You’ll need the backup file for step 6.
You need to have BlackBerry Desktop installed on your computer. If you haven’t done that yet, do it.
Connect your BlackBerry device to your computer with a USB cable. If BlackBerry Desktop does not start automatically, start it.
Do a backup. Just hit “Back up now” and follow the prompts. Do a full backup. Once you’re done, go to step 5.
Step 5: Merge the combined MMS Config 2.0/Wap Push Config service book file with your existing service books
Open MagicBerry
Press File > Open and at the bottom of the Open dialogue window beside the File name box, change “IPD Files (.ipd)” to “BBB Files (.bbb)”. Navigate to the folder where you stored your backup, and open it. It might take a while to open.
Click Manipulate > Merge.
Go down the list on the left hand side and tick the checkboxes for the service book entries (they will be way down). If there are service books listed for MMS Config or Wap Push Config, uncheck those boxes.
On the right side of the “Merge” window, where it says, “Choose second IPD file,” press the button with the three dots. Choose your merged MMS Config 2.0/Wap Push Config file.
Press “Merge Selected,” enter a file name (and select the directory if necessary), and press “Save.”
Optional: You can merge the newly created file again with any other service books you may need – such as the Anworm service books for the browser mentioned in my thread on CrackBerry. Just follow the process used in step 3.
Step 6: Install the Service Books to your phone:
Connect your BlackBerry to your computer with a USB cable if it isn’t still connected.
On your BlackBerry, go to Options > Device > Advanced System Settings > Service Book
Hold down the “Alt” key and press S B E B. You should see a message that says, “Legacy SB Restore Enabled.” Press Okay.
On your computer, open BlackBerry Desktop.
Go to Device > Restore.
Press “Change” and navigate to the folder with the merged .ipd file you created. Press “OK.” You should now see the file listed in the Restore window.
Click on the merged .ipd file you created to select it.
Under the heading “Select Data to Restore,” select “Select Device Data and Settings” and then tick the box for “Service Book.” This step is really important. Make sure it's done right. If you screw it up you could end up wiping a lot of settings and data.
Press “Restore” and answer “Yes” to the confirmation dialogue.
Close the BlackBerry Desktop software, disconnect your device, and do a battery pull to reboot.
Voila! If everything went well, you should have MMS capabilities. Test your ability to send and receive multimedia by sending yourself a picture message. You should receive the message within about 10 seconds.
If it doesn’t work, go back and make sure EVERYTHING in the file is done perfectly. If you find a problem, fix it, merge the files again, and reinstall the service books.
Solved!
Go to Solution.

Why not just ask carrier to enable MMS? I know T-Mobile can and will do it, even if there is no data plan at all on the line. We did it for my daughter and I know T-Mobile has done it for others. I assume other carriers do the same, but don't know....Which is why I ask.
- Ira

How to enable the widgets in Indesign CC..?

Hi,
I am working on porting our Indesign CS6 plugin to Indesign CC plugin.I have completed the porting and the plugins has opened in Indesign CC,but i have one problem in design. Three of our Widgets has not opened in Indesign CC.
The code is the following,
.fr file
resource SampleDialogWidget (kSDKDefDialogResourceID + index_enUS)
 __FILE__, __LINE__,
 kSampleDialogWidgetID, // WidgetID
 kPMRsrcID_None, // RsrcID
 kBindNone, // Binding
 0, 0, 700,400, // Frame (l,t,r,b)
 kTrue, kTrue, // Visible, Enabled
 kSampleDialogTitleKey, // Dialog name
 //<FREDDYWIDGETDEFLISTUS>
SamplePrefListBox
 SamplePreflistboxWidgetID,
 kSysOwnerDrawListBoxPMRsrcId, // WidgetId, RsrcId
 kBindAll, // Frame binding
 Frame(15,15,170,360) // Frame
 kTrue, kTrue, // Visible, Enabled
 1,0, // List dimensions
 19, // Cell height
 1, // Border width
 kFalse,kTrue, // Has scroll bar (h,v)
 kTrue, // Multiselection
 kTrue, // List items can be reordered
 kTrue, // Draggable to new/delete buttons
 kTrue, // Drag/Dropable to other windows
 kTrue, // An item always has to be selected
 kFalse, // Don't notify on reselect
 kSamplePrefListElementRsrcID // Fill list box with widgets with this ID (default is 0)
 CellPanelWidget
 kCellPanelWidgetID, kPMRsrcID_None, // WidgetId, RsrcId
 kBindAll, // Frame binding
 Frame(-1,1,154,340) // Frame
 kTrue, kTrue // Visible, Enabled
 // ----- This is the CPanelControlData that holds the widgets
 // that are items in the list box. They are not persistent
 GenericPanelWithBorderWidget
 SamplePrefGeneralTabWidgetID, kPMRsrcID_None,
 kBindBottom |kBindRight,
 Frame(175,10,695,360) // Frame
 kTrue, kTrue,
 StaticTextWidget
 kInvalidWidgetID, // WidgetId (default=0)
 kSysStaticTextPMRsrcId, // RsrcId
 kBindNone, // Frame binding
 10, 15, 138, 35, // Frame: left, top, right, bottom.
 kTrue, kTrue, // Visible, Enabled
 kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
 kSamplePrefProjectPathStringKey, // Initial text.
 kSamplePrefProjectPathTextEditBoxWidgetID // No associated widget
 // TextEditBox Widget resource
 TextEditBoxWidget
 kSamplePrefProjectPathTextEditBoxWidgetID, // WidgetId
 kSysEditBoxPMRsrcId, // RsrcId
 kBindNone, // Frame binding
 Frame(140, 15, 420, 35), // Frame (l,t,r,b)
 kTrue, kTrue // Visible, Enabled
 0, // Widget id of nudge button (0 so we dont get one)
 0, 0,// small,large nudge amount
 0, // max num chars(0 = no limit)
 kFalse,// is read only
 kFalse,// should notify each key stroke
 kFalse,// range checking enabled
 kFalse,// blank entry allowed
 0, // Upper bounds
 0, // Lower bounds
 "", // Initial text
 ButtonWidget
 kSampleChooseProjectButtonWidgetID,
 kSysButtonPMRsrcId,
 kBindNone,
 430, 15, 500, 35,
 kTrue, kTrue,
 kSampleChooseBtnStringKey,
GenericPanelWithBorderWidget
 SamplePrefFittingTabWidgetID, kPMRsrcID_None,
 kBindBottom |kBindRight,
 Frame(175,10,695,360) // Frame
 kTrue, kTrue,
 StaticTextWidget
 kInvalidWidgetID, // WidgetId
 kSysStaticTextPMRsrcId, // RsrcId
 kBindNone, // Frame binding
 Frame( 10,15,300,35 ), // Frame (l,t,r,b)
 kTrue, kTrue, kAlignLeft, // Visible, Enabled, Alignment
 kDontEllipsize,kTrue, //**new element in InDesign 2.0: don't add any ellipses
 "Drag/Drop Operation", // Text
 0// WidgetId for associated control for shortcut focus
 SeparatorWidget
 0,
 kPMRsrcID_None,
 kBindNone,
 Frame(10,37,450,38),
 kTrue,kTrue,
 StaticTextWidget
 0, // WidgetId
 kSysStaticTextPMRsrcId, // RsrcId
 kBindNone, // Frame binding
 Frame( 10, 40, 250, 60 ), // Frame (l,t,r,b)
 kTrue, kTrue, kAlignLeft, // Visible, Enabled, Alignment
 kDontEllipsize,kTrue, //**new element in InDesign 2.0: don't add any ellipses
 kSampleTextOptionsTextKey, // Text
 0 // WidgetId for associated control for shortcut focus
 CheckBoxWidget
 kSampleTextFitCheckBoxWidgetID, // WidgetId
 kSysCheckBoxPMRsrcId, // RsrcId
 kBindNone,
 Frame(150, 40, 350, 60) // left, top, right, bottom
 kTrue, // Visible
 kTrue, // Enabled
 kAlignLeft, // Alignment
 kSampleTextFitChkBoxTextKey // Initial text
GenericPanelWithBorderWidget
 SamplePrefScriptEventsTabWidgetID, kPMRsrcID_None,
 kBindBottom |kBindRight,
 Frame(175,10,695,360) // Frame
 kTrue, kTrue,
 StaticTextWidget
 0, // WidgetId (default=0)
 kSysStaticTextPMRsrcId, // RsrcId
 kBindNone, // Frame binding
 10, 10, 200, 30, // Frame: left, top, right, bottom.
 kTrue, kTrue, // Visible, Enabled
 kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
 kSampleDropDownEventsTextKey, // Initial text.
 0 // No associated widget
SamplePrefListBox
 SamplePrefDragDropScriptlistboxWidgetID, kSysOwnerDrawListBoxPMRsrcId, // WidgetId, RsrcId
 kBindAll, // Frame binding
 Frame(10, 35, 200, 120) // Frame
 kTrue, kTrue, // Visible, Enabled
 1,0, // List dimensions
 19, // Cell height
 1, // Border width
 kFalse,kTrue, // Has scroll bar (h,v)
 kTrue, // Multiselection
 kTrue, // List items can be reordered
 kTrue, // Draggable to new/delete buttons
 kFalse, // Drag/Dropable to other windows
 kTrue, // An item always has to be selected
 kFalse, // Don't notify on reselect
 k SamplePrefListElementRsrcID // Fill list box with widgets with this ID (default is 0)
 CellPanelWidget
 kCellPanelWidgetID, kPMRsrcID_None, // WidgetId, RsrcId
 kBindAll, // Frame binding
 Frame(-1,1,187,243) // Frame
 kTrue, kTrue // Visible, Enabled
 // ----- This is the CPanelControlData that holds the widgets
 // that are items in the list box. They are not persistent
 ButtonWidget
SamplePrefDragDropScriptAddBtnWidgetID,
 kSysButtonPMRsrcId,
 kBindNone,
 20, 125, 90, 145,
 kTrue, kTrue,
 kSampleAddScriptButtonTextKey,
 ButtonWidget
SamplePrefDragDropScriptRemoveBtnWidgetID,
 kSysButtonPMRsrcId,
 kBindNone,
 100, 125, 180, 145,
 kTrue, kTrue,
 kSampleRemoveScriptButtonTextKey,
Elements added:
void SampleDialogController::PopulatePrefListElement()
do
 InterfacePtr<IPanelControlData> iPanelControlData(this, UseDefaultIID());
 ASSERT(iPanelControlData);
 if(!iPanelControlData) {CAlert::InformationAlert("IPanelControlData err");break;}
 SDKListBoxHelper listHelper(iPanelControlData,kSamplePluginID, SamplePreflistboxWidgetID, kSampletDialogWidgetID);
 IControlView * listBox = listHelper.FindCurrentListBox();
 if(listBox == nil) {
 CAlert::InformationAlert("listBox err");
 break;
 listHelper.EmptyCurrentListBox();
 InterfacePtr<IListBoxController> listCntl(listBox,IID_ILISTBOXCONTROLLER); // useDefaultIID() not defined for this interface
 ASSERT_MSG(listCntl != nil, "listCntl nil");
 if(listCntl == nil) {
 CAlert::InformationAlert("IListBoxController err");
 break;
 //Addin the string to the listbox
 const int targetDisplayWidgetId =SamplePrefOptionTextWidgetID;
 listHelper.AddElement("General", targetDisplayWidgetId);
 listHelper.AddElement("Fitting", targetDisplayWidgetId);
 listHelper.AddElement("Events and Scripts", targetDisplayWidgetId);
 listCntl->DeselectAll();
}while(0);
I dont know how to enable these three widgets in Indesign CC.please refer this code and help me if anyone has idea regarding this problem.
Thanks in advance,
Vimala L

Hi,
As per ur suggestion,i have done the below changes
.fr file:
type SamplePrefListBox
(kViewRsrcType) : StdListBoxWidgetN
(ClassID = kStdListBoxWidgetNewBoss)
Class
 kSamplePrefListBoxWidgetBoss,
 kStdListBoxWidgetNewBoss,
 IID_IOBSERVER,kSamplePrefListBoxObserverImpl,
resource SampleDialogWidget (kSDKDefDialogResourceID + index_enUS)
 __FILE__, __LINE__,
 kSampleDialogWidgetID, // WidgetID
 kPMRsrcID_None, // RsrcID
 kBindNone, // Binding
 0, 0, 700,400, // Frame (l,t,r,b)
 kTrue, kTrue, // Visible, Enabled
kSampleDialogTitleKey, // Dialog name
 //<FREDDYWIDGETDEFLISTUS>
 SamplePrefListBox
SamplePreflistboxWidgetID,
 kSysOwnerDrawListBoxPMRsrcId, // WidgetId, RsrcId
 kBindAll, // Frame binding
 Frame(15,15,170,360) // Frame
 kTrue, kTrue, // Visible, Enabled
 kTrue, //Erase before draw
 kInterfacePaletteFill, //Interface color
 1,0, // List dimensions
 19, // Cell height
 1, // Border width
 kFalse,kTrue, // Has scroll bar (h,v)
 kTrue, // Multiselection
 kTrue, // List items can be reordered
 kTrue, // Draggable to new/delete buttons
 kTrue, // Drag/Dropable to other windows
 kTrue, // An item always has to be selected
 kFalse, // Don't notify on reselect
 0,
 0,
 kFalse, // Display root node
 kFalse, // Use Horizontal scroll bar
 kTrue, // Use vertical scroll bar
 19, // Vertical scroll button increment
 1, // Vertical thumb scroll increment
 0, // Horizontal scroll button increment
 0, // Horizontal thumb scroll increment
 1, // Items selectable 1 = Single selection
 kFalse, // Allow children from multibler parents to be selected
 kTrue //, // Allow discontiguous selection
I got error...,error R32745: # Error: Expected ')'
SamplePrefListBoxObserver file:
void SamplePrefListBoxObserver::AutoAttach()
 InterfacePtr<ISubject> subject(this, UseDefaultIID());
 if (subject != nil)
 subject->AttachObserver(this, IID_ILISTCONTROLDATA);
void SamplePrefListBoxObserver::AutoDetach()
 InterfacePtr<ISubject> subject(this, UseDefaultIID());
 if (subject != nil)
 subject->DetachObserver(this, IID_ILISTCONTROLDATA);
void SamplePrefListBoxObserver::Update(const ClassID& theChange,ISubject* theSubject,const PMIID &protocol,void* changedBy)
do {
 InterfacePtr<IPanelControlData> iPanelControlData(this, UseDefaultIID());
 if(!iPanelControlData)
 {CAlert::InformationAlert("iPanelControlData err");break;}
 InterfacePtr<IWidgetParent> iWidgetParent(this, UseDefaultIID());
 ASSERT(iWidgetParent);
 if(!iWidgetParent)
 {CAlert::InformationAlert("iWidgetParent err");break;}
 InterfacePtr<IPanelControlData> iPanelControlDataDialog(
 (IPanelControlData*)iWidgetParent->QueryParentFor(IID_IPANELCONTROLDATA) );
 if(!iPanelControlDataDialog)
 {CAlert::InformationAlert("iPanelControlDataDialog err");break;}
 InterfacePtr<IControlView> view(theSubject, UseDefaultIID()) ;
 if (view == nil)
 {CAlert::InformationAlert("Can't find the panel control view");break;}
 if (view->GetWidgetID() != SamplePreflistboxWidgetID)
 if(view->GetWidgetID() == SamplePrefDragDropScriptlistboxWidgetID)
 this->DeSelectList(iPanelControlDataDialog,SamplePrefUpdateScriptlistboxWidgetID);
 this->DeSelectList(iPanelControlDataDialog,SamplePrefImportScriptlistboxWidgetID);
 this->DeSelectList(iPanelControlDataDialog,SamplePrefAutoFlowScriptlistboxWidgetID);
 else if(view->GetWidgetID() == SamplePrefUpdateScriptlistboxWidgetID)
 this->DeSelectList(iPanelControlDataDialog,SamplePrefDragDropScriptlistboxWidgetID);
 this->DeSelectList(iPanelControlDataDialog,SamplePrefImportScriptlistboxWidgetID);
 this->DeSelectList(iPanelControlDataDialog,SamplePrefAutoFlowScriptlistboxWidgetID);
 else if(view->GetWidgetID() == SamplePrefImportScriptlistboxWidgetID)
 this->DeSelectList(iPanelControlDataDialog,SamplePrefDragDropScriptlistboxWidgetID);
 this->DeSelectList(iPanelControlDataDialog,SamplePrefUpdateScriptlistboxWidgetID);
 this->DeSelectList(iPanelControlDataDialog,SamplePrefAutoFlowScriptlistboxWidgetID);
 else if(view->GetWidgetID() == SamplePrefAutoFlowScriptlistboxWidgetID)
 this->DeSelectList(iPanelControlDataDialog,SamplePrefDragDropScriptlistboxWidgetID);
 this->DeSelectList(iPanelControlDataDialog,SamplePrefUpdateScriptlistboxWidgetID);
 this->DeSelectList(iPanelControlDataDialog,SamplePrefImportScriptlistboxWidgetID);
 if ((protocol == IID_ILISTCONTROLDATA) && (theChange == kListSelectionChangedByUserMessage) )
 if (view->GetWidgetID() ==SamplePreflistboxWidgetID)
 IControlView* generaltab = iPanelControlDataDialog->FindWidget(SamplePrefGeneralTabWidgetID);
 if(!generaltab)
 {CAlert::InformationAlert("generaltab err");break;}
 IControlView* fittingTab = iPanelControlDataDialog->FindWidget(SamplePrefFittingTabWidgetID);
 if(!fittingTab)
 {CAlert::InformationAlert("fittingTab err");break;}
 IControlView* scriptEventTab = iPanelControlDataDialog->FindWidget(SamplePrefScriptEventsTabWidgetID);
 SDKListBoxHelper listHelper(iPanelControlData,kSamplePluginID, SamplePreflistboxWidgetID, kSampleDialogWidgetID);
 IControlView * listBox = listHelper.FindCurrentListBox();
 if(listBox == nil){CAlert::InformationAlert("listBox err");break;}
 InterfacePtr<IListBoxController> listCntl(listBox,IID_ILISTBOXCONTROLLER);
 if(listCntl == nil) {break;}
 int32 Selindex = listCntl->GetSelected();
 if(Selindex!=-1){
 InterfacePtr<IPanelControlData> panelControlData1(listBox, UseDefaultIID());
 if(!panelControlData1) {break;}
 IControlView* cellPanelview = panelControlData1->FindWidget(kCellPanelWidgetID);
 InterfacePtr<IPanelControlData> panelControlData2(cellPanelview, UseDefaultIID());
 if(!panelControlData2) {break;}
 IControlView* cellView = panelControlData2->GetWidget(Selindex);
 InterfacePtr<IPanelControlData> panelControlData3(cellView, UseDefaultIID());
 if(!panelControlData2) {break;}
 IControlView* textView = panelControlData3->FindWidget(SamplePrefOptionTextWidgetID);
 InterfacePtr<ITextControlData> cellText (textView, UseDefaultIID());
 PMString selectedItem = cellText->GetString();
 if(selectedItem=="General")
 generaltab->ShowView();
 fittingTab->HideView();
 scriptEventTab->HideView();
 else if(selectedItem=="Fitting Options")
 generaltab->HideView();
 fittingTab->ShowView();
 scriptEventTab->HideView();
 else if(selectedItem=="Events and Scripts")
 generaltab->HideView();
 fittingTab->HideView();
 scriptEventTab->ShowView();
 } while(0);
void SamplePrefListBoxObserver::DeSelectList(IPanelControlData* iPanelControlData,WidgetID listBoxWidgetID)
do
 SDKListBoxHelper listHelper(iPanelControlData,kSamplePluginID, listBoxWidgetID, kSamplePanelWidgetID);
 IControlView * listBox = listHelper.FindCurrentListBox();
 if(listBox == nil) {
 CAlert::InformationAlert("listBox err");
 break;
 InterfacePtr<IListBoxController> listCntl(listBox,IID_ILISTBOXCONTROLLER); // useDefaultIID() not defined for this interface
 ASSERT_MSG(listCntl != nil, "listCntl nil");
 if(listCntl == nil) {
 CAlert::InformationAlert("IListBoxController err");
 break;
 listCntl->DeselectAll(kTrue,kFalse);
}while(0);
please refer the above code and help me to develop the plugin.
We have used the SDKListBoxHelper file in our plugin.If it works in Indesign CC?
Thanks,
Vimala L

How to add a check box in ALV Grid using SAP R/3 release 4.6b?

Hello everyone,
I hope you all fine.
I'm writing because I have a requirement with ALV Grid, what I need to do, is to insert a checkbox into a cell, I already read the forum to know how to do that, but I'm using a SAP R/3 release 4.6b, and when I execute the program the checkbox is displayed greyout, because this release doesn't have the EDIT property into the slis_t_fieldcat_alv.
Does any body know how to enable the checkbox cell in the ALV Grid for this release?, so it will allow the user to mark the desired rows.
I'll really appreciate if you guys could help me to find a solution.
Thanks for your time.
Regards,
Guillermo

Hi,
if you need just a check box for each line, try to get rid of this line from your layout.
g_layout-box_fieldname = 'ZZCHECK'.
SAP uses this field to store info about selected lines. Hence you click on the second check box, you select different line and the first line is erased. You can select more line by holding SHIFT + CTRL
Cheers

How to enable user sets from tools in sales order

Hi,
How to enable user sets from tools in sales order..it is greyed out..
and is there anyway we can do to add shipsets from other place?
Thanks

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

How to - enable - multi touch - in windows 7 ultimate - for my G560 touchpad

I and my friend have the lenovo G560 laptops. I am running windows 7 ultimate and my friend is running ubuntu 11.04 OS in our laptops.
In Ubuntu: The multi touch is enabled by default for the laptop touch-pad. For vertical scrolling, we can use two fingers to navigate.
In Windows 7 Ultimate: I don't know how to enable this multi-touch feature.
Your help is very much appreciated.
Thanks in advance.

control panel > hardware and sound > mouse > mouse properties > device settings > settings ( if you have synaptic mouse )
if you don't synaptic, check the mouse properties to enable/disable the features you'd like to.

How to enable CRL checking

Similar Messages

Maybe you are looking for