How to Enable/Disable suppressUpload and suppressDownload

my xml doesnt have this attribute
how to enable /disable supressUpload and suppressDownload.
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZAM_09" version="09">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZAM_09" version="2" type="twoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="true" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="BUKRS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN1" type="C" length="12" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN2" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="BUKRS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN1" type="C" length="12" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN2" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="KOSTL" type="C" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="WERKS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STORT" type="C" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="TXT50" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="TXA50" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>

Just adding on to Nameeta's post, there is a supress download checkbox in the advanced setting s link(Settings -> Advanced Settings) on the client, this will supress downloads for all syncbos and not just for any one syncbo. Also there are no tools in the middleware to add these settings, the only way to do this is to modify the xml manually.
Best Regards,
Karthik
Message was edited by:
Karthik V Setty

Similar Messages

How to enable/disable the input fields based on the data entered/user action in the web dynpro abap?

How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.

Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
     DATA ls_context TYPE wd_this->element_context.
     DATA lv_visible TYPE wd_this->element_context-visible.
*   get element via lead selection
     lo_el_context = wd_context->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_context IS INITIAL.
     ENDIF.
*   @TODO fill attribute
*   lv_visible = 1.
*   set single attribute
     lo_el_context->set_attribute(
       name = `READONLY`
       value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
     DATA lo_el_input TYPE REF TO if_wd_context_element.
     DATA ls_input TYPE wd_this->element_input.
     DATA lv_vbeln TYPE wd_this->element_input-vbeln.
*   navigate from <CONTEXT> to <INPUT> via lead selection
     lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
*   @TODO handle non existant child
*   IF lo_nd_input IS INITIAL.
*   ENDIF.
*   get element via lead selection
     lo_el_input = lo_nd_input->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_input IS INITIAL.
     ENDIF.
*   get single attribute
     lo_el_input->get_attribute(
       EXPORTING
         name = `VBELN`
       IMPORTING
         value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
    DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->element_context.
    DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
    lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
    IF lo_el_context IS INITIAL.
    ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
    lo_el_context->set_attribute(
      name = `READONLY`
      value = ' ' ).

How do I disable podcasts and genius on iPhone 4s?

How do I disable podcasts and genius on iPhone 4s? I find them annoying?

Are you talking about imessage? If you receive a imessage with a bunch of other number included, best way to reply is to send a new text to the sender, so that way only that person receives the reply and not the whole group.

How do i disable copy and paste so a reader can not copy text from my pdf document?

how do i disable copy and paste so a reader can not copy text from my pdf document? i have gone into my security preferences but can not find out how to change the settings so i can disable the copying option.

See http://www.adobe.com/content/dam/Adobe/en/products/acrobat/pdfs/adobe-acrobat-xi-protect-p df-file-with-permissions-tutorial-ue.pdf

How to enable DDE communication and Network DDE DSDM on windows 7

How to enable DDE communication and Network DDE DSDM on windows 7

Hi,
For Network DDE to function, NetDDE.EXE needs to be installed and running on both machines before attempting to conduct a Network DDE conversation. NetDDE.exe is a Windows Service system file that is used to communicate the shared dynamic data exchange used
by Network DDE. It has no graphical user interface (it runs as a background Windows service).
For more information, please refer to this article:
http://www.citect-webhelp.schneider-electric.com/vijeo/Content/Starting_network_DDE_services.html
http://support.ge-ip.com/support/index?page=kbchannel&id=S:KB15377&actp=search
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

How to enable ws-addressing and set ws-Reply to & message-Id ??

How to enable ws-addressing and set ws-Reply to & message-Id and all related properties. ???
I looked at the documentation but not sure how to do this.
Any Help is appreciated.

No it is not possible to add the xml file to the already compiled war and not compiling again.
There are only two ways to add the policy file to weblogic deployed web service.
1: through the policy annotation in the web service java file.
2: through the admin console if the web service is deployed as a separate war.
thanks,
sandeep

How do I disable my and-virus to download adobe reader

how do I disable my and-virus to download adobe reader

Locate the uninstaller for your anti-virus software and remove it from your computer. This will turn it off as well. Never reinstall it because you really don't need it. See:
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
If you require anti-virus protection I recommend using ClamXav.

My wifi keeps coming on when i don't want it to. How do i disable it and keep it off?

My wifi keeps coming on when i don't want it to. How do i disable it and keep it off?

kcquestions,
That's a very good question! It's important to be on the network you want to be on. How are you turning the wi-fi off? If you go into your settings there should be a wi-fi switch as the second option from the top. If we turn it off there it shouldn't come back on until you tell it to. If you select that and press the menu button (3 dots in the top right corner) you can also turn off "Allow wi-fi scanning" which can help not get notified of them when wi-fi is off.
AndrewT_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Does anyone know how to enable/disable a dropdown menu in Forms at runtime?

Is there a way how to disable/enable dropdown menu for menus that have multiple sub levels in Oracle Forms? I am trying to use the set_menu_item_property function but this takes 'menu.item' format for the first argument. I am trying to enable/disable a menu item in the form of 'menu.item.subitem' and was not able to do it using this function. If anyone knows a different function or method, please reply. I have shown an example below.
Setup -> Software -> Front Page
From the above example, I can enable/disable Software using set_menu_item_property function. But, how do I enable/disable the Front Page menu in Oracle forms at runtime?
Thanks
Edited by: user480347 on Aug 24, 2010 3:37 PM

Yes you are on the right track. You need to pass then complete menu name to set_menu_item_property
Immediate_parent menu.item_name e.g
For example you have menu like this
Id like
A1 A10 > A1010
Home > Input > Form 1
A1 A10 > A1020
Home > Input > Form 2 To disable Form 2 you must pass menu name as
A10.A1020Hope it helps

How to enable /disable MWI ?

Hi,
I want to write a small application to enable/disable IP Phone lamp. But confused by how to enable MWI(Message Waiting indicator). TAPI ? AXL ? or some others , which can implement it . Could you give me some direction, thank you !

I never checked what happens on a database level. However, for any actions that have a direct influence on a device, writing directly into the database is the wrong approach.
As an example: if you set a forward (callforward all) via database (and not AXL), calls may well be forwarded, but the phone's status won't be adapted (so you don't have the callforward indicator and no information about the callforward). If you set the callforward via JTAPI or AXL, the phone's status will also be updated to show that it has been forwarded.
When you configure a phone, you'll see the same thing in many cases.. especially in older CCM releases, you were often told that you need to reset the phone to apply a change you've made. In newer versions, this is often (but not always done automatically.. you'll see the phone restart after pressing update).. it's the same thing here.. you write into the database, but then you also have to apply those changes to the phone (one good example is changing a line label.. you won't get the label to change on the phone by just writing to the database.. you have to restart the phone for it to load the new label name).
Even if you need to get the mwi status, JTAPI will do that for you (CiscoAddress.getMessageWaiting - and to set it, it's CiscoAddress.setMessageWaiting). Since you need a CTI command to set the MWI, you can as well resort to CTI to get the MWI status as well and don't bother with the database.
fkcallingsearchspace_mwi is definitely not it though - I can tell you that without looking at the diagram since fk_anything is a foreign key and you have an uuid value in that field. The mwi status would be a boolean since it can have just two values. In fact, it's numplan.ismessagewaitingon but as I said.. with any element that has a direct influence on a phone's appearance or behavior, you cannot just change it... at best you need a phone reset. And if you do it with JTAPI (and probably TAPI too.. I can't be sure because I've never done TAPI and hope to never have to), you can change the MWI status on the fly without having to restart the phone, which is much more elegant.

Enabling / Disabling graphs and opening a new Front Panel Window

Hi,
I have a simple application of showing 12 analog signals on 12 different graphs placed vertically in aligned position. I have to develop a user interface so that if user wants to display signal no. 1, 4 and 6 out of total 12 signals, he should make selection using check boxes and click a re-draw button. It should result in opening a separate window with these three signals displayed as separate graphs aligned vertically and adjusted to fit window size. Similarly later user can change his selection of displaying signals (from same acquired data) say 1, 3, 5, 6, 8, 9, 11 & 12 and click Redraw button. It should result in opening a new Window showing all these signals as separate graphs which are aligned vertically and resized to fit the window. Now I have two major issues in this context.
1) I have been searching LabView help to locate a way to open a new window for this purpose but I failed to locate any way for it. As per my limited knowledge, it seems that we cannot have multiple "Front Panel" windows in Labview.
2) For the graph I could not locate a control to enable/disable a graph so that it appears or vanishes. Is there any way to achieve it?
I shall appreciate your valuable advice. I shifted from "Lab View Signal Express" to "Lab View" in order to achieve this user interface design but I am still not successful in finding a good solution for this application.
Regards
Mnuet

Hi Mnuet,
You can do what was said above. Here is a KB on dynamically loading VIs. It looks something like this.
Dynamically loaded VIs are loaded at the point in code while running, as opposed to being loaded when the parent VI is loaded into memory like normal subVIs. You can make a reference to them and then control the front panel appearance, their run status, etc with property nodes and invoke nodes.
Jeff | LabVIEW Software Engineer

How to enable / disable SSRS Parameter

Hi
I want to enable a parameter called "start date" (type is date) when another (value from dropdown) parameter is selected
Say for an example, i have below 3 parameters
1. drop down which 2 values called "vtextbox","vdate"
2. start (data type is date)
3. finish (data type is date)
when i select "vdate"value from the dropdown 2nd and 3rd parameters has to be enable
similarly when i select "vtextbox" value from the dropdown 2nd and 3rd parameter has to disable
I have searched many forums every one says this is not possible in report manager interface
But this is possible in custom code
please make a note all three parameters are independant
It would be great if any one provide the custom code for same
Regards
Santosh

Hi itsmesantosh1982,
According to your description, you want to use a parameter to control enable/disable other two parameters. Right?
In Reporting Services, when we create a parameter, this parameter has been enabled. The only way you want to disable the parameter is deleting it. In this scenario, disable the two parameter is same as selecting all values in these two parameters. So
we can just modify the default values in 2nd and 3rd parameter instead of using cascading parameter. We can create a dataset, put in the query below:
IF @Param='vtextbox'
select distinct startdate from [table]
else
select '[value]'
The [value] can be any value which is not existing in [table]. So when you select 'vtextbox', the default value will be all values in the table. If you select 'vdate', it will need you to select value automatically because the return value is not existing
in the table. This can be an effective workaround for your requirement.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How do I disable Lion and go back to snow leopard

I up graded to Lion. Now my wireless router can't connect because it doesn't support Lion. I don't want to have to buy a new router.
Can I disable lion and go back to snow leopard?
P.S. I am new at computers so be easy on the terminology please.

It would help if you gave some information on WHY the router isn't working. Start with the basics:
-What brand and model is the router? If you can get a version number, that is also sometimes helpful. This info is generally printed somewhere on the router, usually a label on the back or bottom.
-What do you mean by "doesn't support" - did you get this info from the manufacturer, or is this based on you not being able to connect? Routers use standard wireless protocols (called 802.11a/b, g, or n). The network cards in Mac computers also use these same protocols.I can't think of a reason why it shouldn't work.
-Does your router have a wired connection? If so, can you connect with an Ethernet cable? You may need to be able to connect to the router directly to change settings.
-How old is your router? And have you ever tried to upgrade the firmware settings on it?
-Can you connect to ANY wireless routers anywhere else with your Lion computer?
-Do you have any OTHER computers (Windows or Mac) that can successfully connect to your wireless router?

How to enable /disable a command Button based on a table's selectOne choice

Hi everyone.
I am using JDeveloper 10.1.3.3 and wish to enable / disable a commandButton based on the user's selection of the selectOne radio button.
The idea is that a row of a table may have an associated document so I want to enable or disable the button that downloads it based n the current row selected.
I have followed the advice on problem with table I defined my selectOne component as follows :
<af:tableSelectOne text="#{res['tables.selectionFacet.title']}"
    autoSubmit="true"
    attributeChangeListener="#{backing_browseCVs.onSelectionChange}">The function inside the backing bean looks like this
    public void onSelectionChange(AttributeChangeEvent attributeChangeEvent)
        // access the faces context
        FacesContext fc = FacesContext.getCurrentInstance();
        // get value of the expression #{row.hasCVDocument} that indicates
        // if a document has been added
        ValueBinding vb =
            fc.getApplication().createValueBinding("#{row.hasCVDocument}");
        Boolean hasDoc = (Boolean)vb.getValue(fc);
        // enable the doownload button accordingly
        downloadCVDocBtn.setDisabled(!hasDoc);
    }My problem is that the method never fires. I have placed a breakpoint at the first line but it is never reached.
Any advice will be most welcome.
Thanassis

Hi,
You might need to add 'dataProvider' part in the expression language in your selectionListener:
#{bindings.CVList.currentRow.[b]dataProvider.hasCVDocument}
#{bindings.CVList.currentRow} returns an instance of ViewRowImpl which does not have 'getHasCVDocument()' method, but does have:
Object getCurrentRow()
method, which returns objects from your CVList list, which do have getHasCVDocument() method...
Expression language is resolved through reflection, so when you write:
#{processScope.someClass.someReferencedClass.someAttribute} it is something like:
Get someClass from processScope map, then:
someClass.getSomeReferencedClass().getSomeAttribute()
It's a bit more complex but you get the idea.
Vladimir

Cmfctoolbarcomboboxbutton, how to enable/disable

Hi,
I inserted a CMFCToolBarComboBoxButton object in my toolbar. all work fine except enabling and disabling ComboBox according state of my App.
I used EnableWindow but the control still actived.
Any idea?
Tanks.
My creation code :
if (wParam == IDR_MAINFRAME24) {
m_ComboButton = new CMFCToolBarComboBoxButton(ID_MONTH_FILTER, GetCmdMgr()->GetCmdImage(ID_MONTH, FALSE),
CBS_DROPDOWNLIST);
CString strMonths, strMonth;
int i, curPos = 0;
if (strMonths.LoadStringW(IDS_MONTHS)) {
i = 1;
//m_ComboButton->AddItem(_T(""), 0);
strMonth = strMonths.Tokenize(_T(";"), curPos);
while (strMonth != _T("")) {
m_ComboButton->AddItem(strMonth, i);
strMonth = strMonths.Tokenize(_T(";"), curPos);
i++;
m_wndToolBar.ReplaceButton(ID_MONTH, *m_ComboButton);
CMFCToolBarComboBoxButton * pMonthCombo = CMFCToolBarComboBoxButton::GetByCmd(ID_MONTH_FILTER, FALSE);
if (pMonthCombo) {
pMonthCombo->SetCenterVert(false);
pMonthCombo->SetText(_T("Advanced filter"));
pMonthCombo->EnableWindow(FALSE);

Tank you for your help.
you are right, but a update cammand ui message is not send by CMFCToolBarComboBoxButton object.
I make a test on my side and mesajflaviu's suggestion really helpful. Using ON_UPDATE_COMMAND_UI macro, I can disable the CMFCToolBarComboBoxButton in the CMFCToolBar. See my test code snippet:
BOOL m_enable; //use to detect if enable the combo box
afx_msg void OnUpdateCombo(CCmdUI *pCmdUI);
ON_UPDATE_COMMAND_UI(IDR_COM, &CMainFrame::OnUpdateCombo)
void CMainFrame::OnUpdateCombo(CCmdUI *pCmdUI)
pCmdUI->Enable(m_enable);
void CMainFrame::OnEditDisable()
// TODO: Add your command handler code here
m_enable = FALSE;// use a menuitem to disable the combo box
///////create the CMFCToolBarComboBoxButton//////////
LRESULT CMainFrame::OnToolbarReset(WPARAM wp, LPARAM lp)
UINT uiToolBarId = (UINT)wp;
TRACE("CMainFrame::OnToolbarReset : %i\n", uiToolBarId);
switch (uiToolBarId)
case IDR_TOOLBAR1:
m_ComboButton = new CMFCToolBarComboBoxButton(IDR_COM, GetCmdMgr()->GetCmdImage(IDR_COM, FALSE), CBS_DROPDOWNLIST);
m_ComboButton->EnableWindow(true);
m_ComboButton->SetCenterVert();
m_ComboButton->SetDropDownHeight(25);
m_ComboButton->SetFlatMode();
m_ComboButton->AddItem(_T("OPTION1"));
m_ComboButton->AddItem(_T("OPTION2"));
m_ComboButton->SelectItem(0);
m_wndToolBar.ReplaceButton(IDR_COM, *m_ComboButton);
break;
return 0;
Check the result screenshot:
Enable:
Disable: Color is turning yellow and cannot click
Best regards,
Shu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to Enable/Disable suppressUpload and suppressDownload

Similar Messages

Maybe you are looking for