How to encrypt an outbound http communication channel?

How can i take a synchronus outbound communication channel and encrypt it using https? In the dropdown I only see http and rfc destination?
Thanks

Hi
Have look at this
http://help.sap.com/saphelp_nw04s/helpdata/en/4f/65c3b32107964996a56e4165077e24/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/d0201854fb6a4cb9545892b49d4851/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/55ba9790-0201-0010-aa98-ce8f51ea93cd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2e7020d-0d01-0010-269c-a98d3fb5d16c
http://help.sap.com/saphelp_nw04s/helpdata/en/a8/882a40ce93185de10000000a1550b0/content.htm
/people/sap.user72/blog/2005/06/16/using-digital-signatures-in-xi
How to achieve encryption in XI
Encryption in XI
XI Encryption
Thanks

Similar Messages

Adding SCP encryption to FTP in communication channel

Hello,
Is there an easy way to have files SCP (secure copy protocol) encrypted as they are output using FTP communication channel such that if the SCP were to fail for some reason, it would register as an adapter engine error and show up as system error in runtime workbench?
We are currently doing this by executing a script (that does the SCP on the output file) in the command execution feature of the communication channel after the file is created on the server. However if the SCP fails, the message is still marked as complete with no error as it is not possible to capture the failure in the script and communcate back to communication channel.
Is there some easy way that file adapter could be enhanced by adapter module development or by module processor development so as to include the SCP encryption step in the code? That way if the SCP fails, it would show up as an error in adapter engine during runtime?
Thanks
JB

Hi Sabita,
If you wish to use Port 22 only, then you can use FTPS option instead of SFTP.
FTPS is readily available with the standard FTP adapter, Please refer the below blog:
/people/rajasekhar.reddy14/blog/2010/04/13/how-to-configure-ftps-in-file-adapter
But to implement this the Third part should be capable of handling Explicit FTP (FTPS) protocol.
Please refer the below thread, this may help you:
what is the port for FTPS communication in File Adapter
-Supriya.

How to monitor messages using CIDX Communication Channel

I created a CIDX Communication Channel. XI failed to get a message from the source. How to monitor the messages using CIDX communication channel.

Not sure about the monitoring but u may recheck the communication channel settings as shown:
Sender
http://help.sap.com/saphelp_nw2004s/helpdata/en/0a/512041cfb7f423e10000000a155106/content.htm
Receiver
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/1b20410e91f523e10000000a155106/content.htm
Regards,
Prateek

How to resolve conflict in ID Communication channel

Hi Experts ,
I am getting conflict while importing a communication channel in QA . Basically we have done a change in Interface determiantion in dev system to get this change refelcted iin QA instead of transporting only interface determination whole config scenario has been transported . Transport got imported succesfully but while activating the change list it failed and shown conflict in Communication channel . Now If in Object tab I select SELECTDSPLAYED VERSION then geeting error merge relation is null if selecting the displayed version then changelist get rejected .in that case it works now but in future also I will not able to make any change in the communication channel and whenever I make change and try to activate it it shows the same version conflict issue .
KIndly help me with your inputs in this regard as sooner or later these transport will be moved to production and I want to keep myself prepared before it goes to production.
Regards,
Saurabh

Hi Saurabh Sharma,
Sorry for missing out that, this issue is with ID (Integration Directory)
I think this has gone wrong in your case. Only interface determination has been changed, but, you have imported whole configuration scenario (along with communication channels).
SAP help [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/39/f3103e02db137de10000000a114084/frameset.htm ] . Note the following for communication channels: To avoid messages being sent from a productive system to systems in the test landscape, the Integration Builder only exports a selection of attributes. Therefore, address data (host, port) and access data (user, password) are not contained in the export. In the adapter metadata in the ES Repository, such attributes are flagged as not transportable (they depend on the adapter type and are fixed). Once new objects have been imported, you must add the non-transportable attributes in the target system. These additions are retained in any further import of the object.
FYI. Unlike when importing in the ES Repository, when importing objects to a directory, version management always creates a new version for the objects.
Solution, as you are not able to activate objects in ID (Integration Directory) due to error message, reject them. Export only Interface determination and import it in QA system.
Regards,
Raghu_Vamsee

How to receive alert mails when communication channel fails

Hi everybody,
Today there were in the "Communication Channel Monitoring" of the Runtime Workbench some Communication Channels in a "red" status and I would like to know if it is possible to receive per mail any alerts about a failing communication channel?
In SXMB_MONI the error is the following:
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=ECPOPR1.corp GROUP=PRODUCCION_SANTANDER R3NAME=PR1 MSSERV=sapmsPR1 PCS=1 ERROR partner not reached (host ECPOPR1.corp, service sapmsPR1) TIME Mon Apr 20 03:25:16 2009 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r_mt.cpp LINE 8688 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 79 ERRNO TEXT A remote host refused an attempted connect operation. COUNTER 1</SAP:AdditionalText>
Usually, I receive mail alerts when messages failed since I have CCMS configurated but in the CCMS I don´t see any entries for this kind of errors with a Communication Channel...
Thanks in advance,
Regards,
Olivier

Hi!
You can receive Alerts even though you are configured CCBPM. Through Control Step you can throw alerts but only difference between PI7.1 and XI is in 7.1 you can easily create Alert categoy in ESR itself at java stack but in XI you can't create it in Java stack you need to create this ALert category though ALRTCATDEF t code in ABAP Stack even though in 7.1 you created in Java Stack it will be reflecting in ABAP Stack.
Next thing is later you need to Configure ALert Rules in RWB and in ABAP Stack at Alert Category you need to Add your XI SAP ID;s at FIxed Receipients and before adding this Ask your Basis people to link your company mail ID or any mail ID with SAP ID so that you can receive Alerts both in RWB ALert Inbox as well as your Mail Server.
Since the above experts given diff blogs you can easily configure...
I hope u understand the flow....right ?
Regards::
Amar Srinivas Eli

How can i use the same communication channel to place the file in 2 differe

Hello Guys,
We have a requirement where I need to archive the file that i am sending to the legacy FTP server in a Idoc to file scenario.
How can i place the file in 2 different locations. In this case place the file in the FTP server and a copy of it in the local NFS folder.

>
Rajeev kumar wrote:
> Hello,
> As per the standards we are supposed to use only one channel.
> that is one idoc, one message in the sxmb_moni.
Rajeev,
You can use an ftp job and save it on XI's folder.
Process the file into tmp directory on local file system and run operating system command to run ftp job to send the file to your file server and then copy the file to your archive folder and then delete the file from tmp.
This should solve your problem.
Regards,
AV.

Under which account XI sends messages through HTTP communication channel

Dear Experts,
Please help us to find out under which account (user) XI sends messages outside through HTTP.
We should send data to external application using HTTP receiver adapter. Target host, username and password are provided by our customer. But during the test we'va got a HTTP 407 error - Proxy Authentification Required. This is our proxy server and go through it we should grant appropriate rights to XI account. But which?

Hi,
This error come because of
the "auth-scheme" element required by the HTTP specification is missing in the "Proxy-Authorization" HTTP header.
Solution of this is to use patch 8 for Support Package 17 and patch 5 of Support Package 18 of the XI ADAPTERFRAMEWORK CORE 3.0 software component.
For XI7.0:
patch 3 of support package 08 of the XI AdapterFramwork Core 7.0
patch 2 of support package 09 of the XI AdapterFramwork Core 7.0
The archives and the support package stack guide can be found on the
services marketplace as described in SAP Note 952402.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

How Do We Monitor HTTP Receiver Communication Channel

Hi Exports,
How do we monitor the HTTP Receiver communication channel. Could you please share your ideas.
I am able to send the message to http to third party system. i want to monitor all messages which it's goes to third party system. Same like if you go to component monitoring we have communication channel monitoring over there we can do monitoring by adapter but when we choose http communication channel there is 0 messages.
Please provide monitoring thing those messages which is goes to third party system.
Advance thanks
Regards
Ramidi S

There isnt any transaction to directly monitor the HTTP adapter. However u may do the following:
1. To test the HTTP adapter you can just test the adapter_plain service in TCODE SICF.
2. TCODE : SMICM and then Shift + F1 and you can see the status of the HTTP server
3. You can go to SM59 to see whether the HTTP connections between XI and R/3 are up and running
Regards,
Prateek

How can One sender communication channel pick two file from two location

Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter.

How to test Particulare Communication Channel is active or not in UDF?

Hi,
Can any body suggest me how to code in UDF particulare Communication Channel is active or not. If it is inactive then I have to thow exception else ok.
Appreciate for your response.
Regards,
Daniel.LA

Daniel,
Check this..
String BSys = "BS_FSCM_AR_CLNT100";
/1. Determine a channel (Business system, Communication channel).
Channel channel = LookupService.getChannel (BSys,"CC_RFC_TEST");
Then you do a
//2. Get a RFC accessor for a channel.
accessor = LookupService.getRfcAccessor(channel);
add this code
try{
if(accessor == null;
}catch(Exception e){
throw new Exception("Communication channel for System " + BSys + "Inactive ");
That should fix it....:-)
Hope that helps
Regards
Ravi Raman
Channel.

Using URL Parameters with HTTP Comms Channel

Hi,
I need to build a new interface (HTTP - RFC) which will use several URL parameters. I've created a HTTP communications channel and Sender Service and this works. I'm able to define several URL Parameters by checking 'Adapter-Sepcific Message Attributes' and then 'Apply URL Parameters' then specifying the individual parameters.
This is straight forward so far but in usual SAP fashion the documentation on HTTP Comms Channels and URL Parameters is non existent. My question is how do I use these parameters once they are passed. I need to use the values as input parameters for the RFC which means I'll need to map these in the Integration Repository I can't find anything on SDN or SAP help that answers the question.
I know I could include these values in the XML payload but that would mean my 'customer' would need to amend their application and I'd rather keep things as they are.
Looking forward to your replies.
Thanks in advance.

May be this could help you to refference . .
For each process template, you can define interactive or composite form reference objects that can optionally be executed at runtime.
To be able to see and execute the reference object at runtime, you must add an appropriate runtime view.
Prerequisites
You can only attach standalone interactive forms to a process. For more information, see Interactive Form Types.
Activities
To attach an interactive form to a process:
       1.      Open the gallery and select a process template. To open its design time, choose Open
       2.      To switch to edit mode, choose (Edit).
       3.      Open the Forms tab page.
       4.      Choose Add and select the type of reference object you want to add. You can choose between Callable Object and Development Object.
Browse and select the reference object, and choose Add once again.
       5.      Repeat step 4 to add more objects.
       6.      To define parameter mapping, select an entry and choose Map Parameters. Select a parameter from the left-hand table, and then select the parameter you want to map from the right-hand table. This groups the input parameters of the form reference object to the relevant input parameters of the process.
If the process does not define input parameters, you can set default values.
       7.      When you have defined the required mappings, choose Done.
       8.      Whenever a newer version of the form reference object is available, its status on the Forms tab page changes to (Deprecated). To update the object, select it from the list and choose Update. The status changes to (Active).
Parameter mapping is preserved unless the parameters of the new object version are different. In this case, you need to define mappings again.
       9.      Finally, choose (Save).

IDoc adapters not in "communication channel monitoring"?

Hi,
I've modified some information that the receiver IDoc adapter is using (the logical system ID). But after I refreshed all the caches the change is not updated when I send an IDoc to R/3.
When this kind of problem happens with RFC adapter you just have to stop and restart the communication channel in communication channel monitoring. But IDoc adapter is not here... so, how can I restart the IDoc communication channel?

Hi,
IDoc adapter doesnt reside on Adapter Engine, its part of ABAP stack, because of this you cannt find it in RWB-Communication channel monitoring...
Try refreshing the cache:
Transaction: sxi_cache
CPACache refresh using the below url:
http://<server:port>/CPACache/refresh?mode = full
to get the changes affected.
Regards,
Sreenivas.

Start and stop the Communication channel from Java Mapping

How to start and stop the Communication channel from Java Mapping in XI 3.0
Scenario PI - > MQ -> Third Party web application
Web application is down and then Communication channels are stop manually .
We need to automate this process,
MQ Solution - Trigger will be set in MQ which will be called when web application is stopped
Trigger will send u201CSTOP u201C message to PI
How to configure PI scenario to stop different com channels when this message received ?

check this link: http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/frameset.htm
make sure that MQ send http request to PI. i dont think a configuration scenario is required in PI. Only roles should be enabled with proper user provided to MQ team.
However, for security reasons, you can configure a scenario if you dont want to expose PI infrastructure directly to 3rd parties.

Reg:To control the communication channel actions externally

Dear All,
My scenario is File to File. Can anyone suggest me how to start and stop a communication channel without using communication channel monitoring in RWB and ATP in component monitoring,since there is no time frame has been set.
Thanks in Advance,
Lavanya .B

Hi,
Try this ... just a sample, modify as per your requirement.
import java.net.*;
import java.io.*;
class ExternalChannelControlPI
     public static void main(String[] args)
          try
               //Give Host Name, Port and Channel Name
               URL server = new URL("http://<Host:port>/AdapterFramework/ChannelAdminServlet?party=*&service=*&channel=" + <ChannelName> + "&action=start");
               //Hard code User Name & Password
               String userPassword = "<USERNAME>" + ":" + "<PASSWORD>";
               URLConnection uc=server.openConnection();
               uc.setRequestProperty ("Authorization", "Basic ");
               BufferedReader br = new BufferedReader(new InputStreamReader(uc.getInputStream()));
               String inputLine = "";
               String output = "";
                while (( inputLine = br.readLine()) != null)
                    output+=inputLine;
                       System.out.print(output);
               br.close();
          catch (Exception e)
               e.printStackTrace();

Communication Channel monitoring in PI 7.1

Hi Folks,
How to do the adapter monitering & Communication channel monitoring in teh sap PI 7.1.
Regards,
Santosh

Hi,
Have you searched in SDN,??
there is no difference compare to other versions
RWB-->ComponentMonitoring>Adapter Engine->Communication channel monitoring--->select communication Channel.fileter,then monitor it.
Regards,
Raj

How to encrypt an outbound http communication channel?

Similar Messages

Maybe you are looking for