How to enqueue data from files

Hi,
we are planning to load data into queue tables from flat files(CSV possbily).
Is there any Oracle provided utility or mechanism to do so?
Please help !!!!

So basically you are creating a temporary work-around to "mimic" the network connection that exists for the queue-to-queue message propagation that currently exists. I see no reason why a solution following the two steps you outlined cannot be done.
Here are my thoughts on this and of course this is not a tested solution.
-For the queue on 10g, create a new subscriber that takes the messages that are queued up and writes them to a holding table. I was going to suggest using an EXTERNAL_TABLE to write directly to the filesystem but you could encounter issues when you need to copy the file to the 8.1.6 system and the subscriber is trying to write an entry. If you can ensure this conflict won't happen, I would suggest going this route to avoid a few steps.
- At the scheduled time (DBMS_SCHEDULER) either read from the holding table and write the entries out to disk (UTL_FILE or EXTERNAL_TABLE). You could have the procedure also call out to a shell script or bat file and connect to the remote system and send the file across (assuming some sort of network connection still exists)
- On the 8.1.6 side, you would need to use SQL*Loader to load the information into a staging table
- A DBMS_JOB entry (or person) could trigger off the process to load the new records from the staging table into the queue on 8.1.6.
Other options and variations of this may exist, but this is what comes to mind. Good luck.

Similar Messages

  • How to insert data from file into matlab script node

    I have interfaced input data from file to be processed using matlab script node. But the problem is that I could not capture the multiple data into matlab script node and to convert it into matrix. Further to this I need to process the data by plotting graphs from it. Thank you in advance for the advice

    Zarina,
    To clarify your problem, you have a script node contaning your Matlab code. Are you then using the standard LV functions to load in your data from a file and pass it into the script node?
    Regards
    Tristan

  • How to transformed data from File to DB but the data to be insert two tables  parallel?

    Hi friends ,I am new to Oracle SOA ,I have one requirement  for the project
    actually in these project
    1.I have to read three different types of files (Employee info,Purchase Order Info,Salaes Order Info) through file adapter these records are to be store in  data base 
    transaction table.In these transaction table contains WHO columns and payload  with clob data type which contains each  record  in xml form.
    2. Now I have to  take these payload data  which is in xml form and store   in the respective table(employee or PO or SO) .I have to call these in dynamically.
    so please give me ideas and suggesstions ,,
    thanks in advance

    Roger,
    I don't know about simple way to load data from file into a table using button from your application,
    Maybe some piece of PL/SQL code with UTL_FILE or DBMS_LOB, or you can try to upload file to database using Apex "File browse" item, and then do some processing with DBMS_LOB... but it will require some work...
    Maybe someone else could advice with some simple method I don't know...
    However loading files using Apex Load Utility is quite easy.
    You can use something like this to load data to views created on remote tables:
    CREATE TABLE local_tmp_table AS SELECT * FROM view_on_remote_table WHERE 1=0;
    --load data from file to created table using Apex Load utility
    INSERT INTO view_on_remote_table SELECT * FROM local_tmp_table;
    COMMIT;
    DROP local_tmp_table;Or without views:
    CREATE TABLE local_tmp_table AS SELECT * FROM remote_table@dblink WHERE 1=0;
    --load data from file to created table using Apex Load utility
    INSERT INTO remote_table@dblink SELECT * FROM local_tmp_table;
    DROP local_tmp_table;Regards
    Tomasz
    Message was edited by:
    Tomasz K.

  • How to insert data from file into long raw field using utl_file?

    I try to insert binary data from a file (under AIX 4.3.3) into a LONG
    RAW field (Oracle 8.1.6).
    First, I retrieve the data from the file like this:
    DECLARE
    FileHandle = UTL_FILE.FILE_TYPE;
    myVariable LONG RAW;
    FileHandle := UTL_FILE.FOPEN ;('prj/oracle/admin/MARTIJN/udump',
    'MyFile.ATT', 'R');
    UTL_FILE.GET_LINE (FileHandle, myVariable);
    UTL_FILE.FCLOSE(FileHandle);
    INSERT INTO myTable(DUMMYFIELD) VALUES(myVariable);
    Where DUMMYFIELD of table myTable is of type LONG RAW.
    The GET_LINE statement crashes on Oracle Error ORA-6502: Numeric of
    Value error: hex to raw conversion error.
    What do I do wrong?
    Do I use the right method to retrieve information from a file and put
    it into a long raw field, should I try it another way?
    Any help greatly appreciated,
    Martijn Rutte

    Zarina,
    To clarify your problem, you have a script node contaning your Matlab code. Are you then using the standard LV functions to load in your data from a file and pass it into the script node?
    Regards
    Tristan

  • How to get data from file and save it in my DB

    Hi for all,
    my problem is :
    i have file in text format and this file have
    data .
    i want to insert this data into my database
    using forms .
    how i can do this .

    Hello,
    You can do this by :
    1. Command Host and u excecute SqlLoader
    Or
    2. Read the text file sequentially with text.io and insert data while not eof.
    Hope help u with this.
    null

  • How to insert data from file to table??

    I need to know that how can i insert data in multiple column through file. I can simply insert data in one column table but couldnt find out the way to put data in all column.
    My data store in a file
    ************************************************text.txt***************
    133, shailendra, nagina, 14/H, 45637, 9156729863
    **************************************************************my_data(table)**********
    trying to insert into below table...
    id, name, last_name, add, pin. mob
    Let me know if anything else needed..:)

    Hi Shailendra,
    Actually, in SQL Developer, you can open a connection to the target schema, right-click on the Tables node in the navigator tree view, select Import Data, then use the Data Import Wizard. It is extremely flexible. It looks like you have a comma separated variable file, so if you select Format: csv and Import Method: insert it will probably work just fine.
    To minimize the chance of errors during import, pick a preview limit value so the wizard can examine the size and data type of all columns in as many data rows as possible, then review the data type/size for each column in the next wizard page and override as necessary. For date columns it is also important to choose the appropriate format mask.
    Hope this helps,
    Gary
    SQL Developer Team

  • How to store data from file

    hi all
    u some data on text file i want to store that data in my table
    data in a.txt is
    name date reason country
    and i ean to store that data in my table with four colums

    this script from asktom can be used to load a .pdf, .xls, .doc and .txt. just creat a procedure for each file you want to up load.
    here is for pdf loading.
    create or replace directory myfiles as 'C:\TEST'
    create table mypdfs (
    id number(38) primary key,
    theblob blob not null);
    declare
    l_blob blob;
    l_bfile bfile;
    begin
    insert into demo values ( 1, empty_blob() )
    returning theBlob into l_blob;
    l_bfile := bfilename( 'MYFILES', 'ora_log.pdf' ); --here you can add the file name and the extension
    dbms_lob.fileopen( l_bfile );
    dbms_lob.loadfromfile( l_blob, l_bfile,
    dbms_lob.getlength( l_bfile ) );
    dbms_lob.fileclose( l_bfile );
    end;
    create or replace package getpdfs
    as
    procedure pdf(p_id in mypdfs.id%type);
    end;
    create or replace package body getpdfs
    as
    procedure pdf(p_id in mypdfs.id%type)
    is
    l_lob blob;
    l_amt number := 32767;
    l_off number := 1;
    l_raw raw(32767);
    begin
    select theblob into l_lob
    from mypdfs where id = p_id;
    owa_util.mime_header('TEST/pdf');
    begin
    loop
    dbms_lob.read(l_lob, l_amt, l_off, l_raw);
    htp.prn(utl_raw.cast_to_varchar2(l_raw));
    l_off := l_off + l_amt;
    end loop;
    exception
    when no_data_found then
    null;
    end;
    end;
    end;
    My favourite is intermedia. You can upload any file and images.
    Good luck

  • How to load data from file contains rows with different number of columns

    hi all,
    a data file contains assets data ordered like this(location_id
    serial_number , quantity
    serial_number , quantity
    single column rows represents location, and two columns rows represents asset details for that location
    123
    12345 ,1
    32145 ,1
    124
    12348 ,12
    41239 ,22
    54189 ,2
    254
    22419 ,1
    I want to use sql loader to load these data after merging locations with thieir assets,like this order(location_id,serial number,quantity)
    123 ,12345 ,1
    123 ,25413 ,1
    123 ,32145 ,1
    124 ,12348 ,12
    124 ,41239 ,22
    124 ,54189 ,2
    254 ,22419 ,1
    Can one help me in that?
    thank you,

    Create external table and code sql query to do it.
    :p

  • How to read data from multiple files and append in columns in one file

    Hi Guys,
    I have a problem in appending data from files in different columns. I have attachement has file A and B which I am reading and not able to get data as in file Result.txt. Please comment on how can I do this
    Solved!
    Go to Solution.
    Attachments:
    Write to file.vi ‏13 KB
    A.txt.txt ‏1 KB
    B.txt.txt ‏1 KB

    You cannot append columns to an existing file. Since the data is arrange line-by-line as one long linear string in the file, you can only append rows. A new row needs to be interlaced into the original file, shifting everything else. If you want to append rows, you need to build the entire output structure in memory and then write all at once.
    (I also don't think you need to set the file positions, it will be remembered from the last write operation.)
    Unless the files are gigantic, here's what I would do:
    (Also note that some of your rows have an extra tab at the end. If this is normal, you need a little bit more code to strop out empty columns. I include cleaned up files in the attachment. I also would not call them A.txt.txt etc. A plain A.txt is probably sufficient.)
    EDIT: It seems Dennis's solution is similar )
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    Write to fileMOD.zip ‏6 KB
    MergeColumns.png ‏6 KB

  • How to read data from a file in OSB

    hi guys,
    Recently, I've got a problem with reading file from specific location. I've actually followed this post OSB 11g - Read or Poll File in OSB - Oracle Fusion Middleware Blog, and then
    I know how to read a file. However, it does not as expected. Because, I've found no way to read data from the file. Therefore, no chance to manipulate the data like assigning to a variable, or extracting ....
    Hence, is there any way to read data from file by using proxy service in OSB ??? No Java code ???
    by the way, supposed that there is no way to read data from a file in OSB. So, What purposes will the way in the post above be used for?
    Many thanks in advance

    http://jakarta.apache.org/poi/hssf/index.html
    HSSF stands for Horrible Spreadsheet Format, but it still works!

  • How to read data from a file that was formatted by excel?

    Hi everyone, I'm familiar with java.io and the ability to read from files, can anyone tell me how to read data from a file that was formatted by excel? Or at least give me some web references so that I can learn about it?

    http://jakarta.apache.org/poi/hssf/index.html
    HSSF stands for Horrible Spreadsheet Format, but it still works!

  • How to export data from a Oracle table to a delimited file?

    I know how to load delimited file into a table, but how to export
    data from a Oracle table to a delimited file?
    Thanks in advance.

    Try looking at this link, it's long but there's three different solutions discussed in it. If you look at Barbara Boehmer's
    solution in her posts in the link below you'll see that she's addressed your concerns with spool files.
    Re: utl_smtp and triggers

  • How to load data from a  flat file which is there in the application server

    HI All,
              how to load data from a  flat file which is there in the application server..

    Hi,
    Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
    If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
    Please let me know if this is helpful or if you need any more inputs.
    Thanks & Regards,
    Nishant Tatkar.

  • How to read data from a zipped MS Access file?

    How to read data from a zipped MS Access file?

    RPJ,
    You do not need to use the Close Zip File.vi when you unzip a folder.  This VI is used when you are creating a zip folder.
    As for examples, I found a couple of ActiveX based MS Access examples.  These programs look to be pretty basic.  For more in depth example I would search Microsoft Developers Network
    http://zone.ni.com/devzone/cda/epd/p/id/2188
    http://zone.ni.com/devzone/cda/epd/p/id/1694
    Regards,
    Jon S.
    National Instruments
    LabVIEW R&D

  • HOW TO READ DATA FROM A FILE AND INSERT INTO A TABLE USING UTL_FILE

    Hi..
    I have a file.I want to read the data from file and load it into a table using utl_file.
    how can I do it?
    Any reply apreciated...

    Hi,
    This is not your requirment but u can try this :
    CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
    GRANT READ ON DIRECTORY text_file TO fah;
    GRANT WRITE ON DIRECTORY text_file TO fah;
    DROP TABLE load_a;
    CREATE TABLE load_a
    (a1 varchar2(20),
    a2 varchar2(200))
    ORGANIZATION EXTERNAL
    (TYPE ORACLE_LOADER
    DEFAULT DIRECTORY text_file
    ACCESS PARAMETERS
    (FIELDS TERMINATED BY ','
    LOCATION ('data.txt')
    select * from load_a;
    CREATE TABLE A AS select * from load_a;
    SELECT * FROM A
    Regards
    Faheem Latif

Maybe you are looking for