How to excute a query in an other form

hi,
i created 2 ADF forms.
the first one represents the table department.
the 2 one represents the table employees and it contains a jtable.
in the first form i have a button "employees" and i want when i click on it the jtable of 2 form will be automatically selecting all employees in this department.
thanks.

hi frank,
i am really using ADF Swing with ADF Business Components but i am using the master detail between factory and department.
and i can not find how to make a master detail detail so i am trying to execute a query.
thanks

Similar Messages

How to stop specific query attached with other query in same process using With method

Would it be possible to stop one query out of two queries attached to single process...because i see it is returning one IDisposable inteface...if i call dispose() method...two queries are stopped/killed...
So how to stop specific query which is combined with other queries in a same process at runtime i.e., attach or detach kind of thing?
Thanks in advance
Satish

Yes, the overloading of the term "Process" can be confusing. In SI, depending on your edition of StreamInsight, a process can run on one or more threads from a pool of threads and are scheduled together. Don't think of a process necessarily as a single
thread or multiple processes as a method of multi-threading.
As for a limit on the number of queries, there isn't a hard limit that I'm aware of. However, there will be a practical limit that will vary based on the complexity of the query, the event rate and your hardware (# of cores). If you are using Standard Edition,
this limit is much smaller as you only have a single scheduler thread. With Premium Edition, you have a scheduler thread for each core on the machine so you can get higher throughput and lower latency. But if you have, say, 4 cores on the machine (don't count
hyperthreaded cores, just real cores), 100 queries and a target throughput of 100K events/second, you'll likely have some problems. At 1K events/sec, you'd likely be fine though. With 32 cores and Premium Edition, you'd probably be OK with 100K events/sec.
So ... like I said, it depends.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

Central Management server - executed a query but how to send the query output in the form of mail?

Hi All,
i have used CMS in SQL 2008 R2. i have added couple of servers in its group. i have executed a query & i need to send the query output in the form of email.
basically query is checking the rows count from couple of user tables in servers.
issue here is how to copy the data that is used by CMS? i need to work on automate the rows count in difft user table in db servers
could you please suggest how can i achieve this?

Copy to what?
SELECT COUNT(*) FROM sys.objects
Running the above statement returns two columns (server name and count)
All the servers SS2005 and onwards , then use
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'name',
@recipients = '[email protected]',
@query = 'SELECT COUNT(*) FROM sys.objects',
@subject = 'Count rows'
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to use Heirarchical Tree to call others forms

Dear All:
I need to use a Heirarchical Tree in the MAIN Page to call ALL FORMs that I made. I mean when I click the node I can get the specified form.
Would you please provide me with an example how to make it.
Cheers

Hi, Was you able to discover how to create a hierarchical tree to call other forms?
Thanks,
Warren

How to change a query created in other id into my id......

first they have given me one id, and asked me to develop a query. i did it. now i got my id. now i want that query to be on my name.? how can i do it?( i have saved that query as local object when i created it).

Hi,
Open the query & save as ( change the description & technical Name).
Regards
CSM Reddy

How to excute a program written in other language?

How to pass some parameters to other excutable program written in other languages and to get the return value back?

http://java.sun.com/j2se/1.3/docs/api/java/lang/Runtime.html

How to find LOV Query in Oracle Web Form

Hi All,
I am currently use oracle ebs R12.1.2 and i just want to know the query which is attached in lov for Oracle web pages kindly help.
Regards

Hi,
There is a bug in OAF for this one, upon clicking on About this page on the newly opened LOV page it still shows the Parent Page Details.
Workaround:
1. After the LOV window opens, click on about this page [This will still show the parent page properties]
2. Now click on backspace. [You should be back to the same LOV Page]
3. Now click on About this page, again, - This should show you the correct details.
Hope that helps!!!
Regards,
Yuvaraj

How to disable Blind Query in Oracle EBS Forms

Hi all,
I am creating a new form in EBS and one of the requirements is to disable the blind query, could you please help me developing this requirement.
Thanks
Ramez

Ramez,
This forum is for general Oracle Forms questions. Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to Excute the BW Roles

Hi All,
How to excute the BW Queries in portal, if any body knows procedure pls reply to me....
Regards,
Jagadish Babu Kanikanti.

Hi Jagdish
check system setting in portal for BW.
or do it by following.
Creating BW system in Portal
From the portal top-level navigation, choose System Administration -> System Configuration -> System Landscape
Navigate to Portal Content -> Your SAP Ssytem Folder i.e SAP BW
Right-click on the SAP BW folder, then choose New -> System
Select SAP system using dedicated application server
from System Template
Make the following entries for the BW system you want to connect to the Enterprise Portal
System Name -
SAP_BW
System ID -
Any ting u want like SAP_BW or SID of BW
System ID Prefix -
com.mycompany
Master Language -
English
Description -
NEXT -> Summary, review the options you selected for the new page.To make changes, choose Back to return to the appropriate screen. Then choose Next till you reach the Summary page, review, and choose Finish
Choose Open the object for editing and choose OK
The Property Editor iView will open
Select Connector in the Property Category dropdown
Enter the fields below according to your SAP system
Application Host -
IP Address of BW system or Host name ( FQDN required for SSO )
SAP Client --- BW system client
SAP System ID -
SID of BW
Server Port -
3200 default for system number 00
SAP System Number -
00 or ur instance number
System Type -
SAP_BW
NOW,
Select User Management from the Property Category dropdown list
Enter the fields below
Logon Method -
UIDPW
User Mapping Type --- Admin,user
Note -: IF u want to use SSO for BW system first selct above and test it with BW system if it's ok than change to following
Logon Method -
SAPLOGONTICKET
User Mapping Type --- Admin,user
choose SAVE.
Select System Aliases in the Edit dropdown list. This opens the System Alias Editor
In Alias, enter SAP_BW. Choose the Add button
Choose Save to save your changes and close the page
Connect With ITS
For BW
In Property Catalog, use the dropdown to select ITS.
Set your SAP system properties according to Following
ITS Description -
Description
ITS Host Name -
Host name : Port for BW system
If u want to use SSO use FQDN instead of host name
ITS Path -
/scripts/wgate
ITS Protocol -
http
Save your settings.
u can check its for BW by following
Find a port for BW using IIS manager
Administrator tools -> Internet Service Manager - >
extend the HOST
Find the site created for BW system same like SID of BW system -> right click -> Properties
TCP Port -- this is used for ur BW system
in IE http://host_for_its:Port_for_bw/scripts/wgate/webgui/!
WAS for BW System
Select Web Application Server (WAS) in the Property Category dropdown list
WAS Description -
BW WAS
WAS Host Name -
Host name : Port for BW system
use FQDN for SSO
WAS Path -
/SAP/BW/Bex
WAS Protocol -
http
Save ur entry.
User Management For BW and EP
Befor u start if u don't use SAP Secu lib during installation
change the following
system Administration -> System configuration -> Um configuration -> Direct editing
find out follwoing
ume.usermapping.unsecure=False
change to
ume.usermapping.unsecure=TRUE
Save and restart portal server
ther are so many option available for DATA source u have required doc for using that
if u have any query for that msg me back
Mapping Users in the Portal
if u want to use UIDPW than user must be map to BW system
go by following
User Administration -> User Mapping
select the user u want to map by serch or entering a name
Choose the Alias for your backend system, for example SAP_BW
Enter the user id and password for BW user
save ur changes.
SSO configuration
make sure ur Portal ITS and BW WAS system belong to Same
domain.
i.e
portal.mycompany.com
its.mycompany.com
bw.mycompany.com
if not, u can do by creating a alias into host file for corresponding system
for SSO follwoing parameter must be set in profile parameter using RZ10 in BW system
login/accept_sso2_ticket -
1
login/create_sso2_ticket -
1
login/ticket_expiration_time --- desired value default 60
now download the portal certificate form follwoing
System administration -> System configuration -> Keystore
Administration
donload verify.der file save it it's like verify.der.zip
extract it than u can get verify.der
now in BW system using trans. STRUSTSSO2
in the certificate section choose import certificate
choose the file tab enter the path of the portal's verify.der file
set the file format to DER coded
in the trust manager choose ADD to PSE and Choose
ADD to ACL
in the dialog box enter the portal system's id (SID) and client
by default portla system ID is the common name (CN) and client is 000
save ur entry and restart the BW server
this are the basci configuration if u have any query related to it msg me back
regards,
kaushal

How to create a query view in sap bw?

can any one please tell me how to create a query view in sap bw 3.5?

Hi,
you can do this by using Bex analyzer and WAD ..
gop through this link ..
http://help.sap.com/saphelp_nw70/helpdata/en/0e/1339427f82b26be10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
hope this helps you ..
Reagrds,
shikha

How to get the query values from the url in a servlet and pass them to jsp

ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A&param2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanks

ok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
%

How to create a query to see Opening stock and closing stock as on particul

Hi All,
How to create a query to see Opening stock and closing stock as on particul.
Regards
Albaik

Hi,
In BI 0IC_C03 will provide u the required information and also having standard queries provided by the SAP.
Plz find the list of Queries provided by the SAP.
=======================================================================================================
Inventory turnover      0IC_C01_Q0001
Range of coverage - quantity      0IC_C01_Q0002
Range of Coverage - Value      0IC_C01_Q0003
Range of coverage of finished goods - quantity      0IC_C01_Q0004
Range of Coverage of Finished Goods - Value      0IC_C01_Q0005
Range of coverage of raw materials - quantity      0IC_C01_Q0006
Range of Coverage of Raw Materials - Value      0IC_C01_Q0007
Obsolete Stock on Hand      0IC_C01_Q0008
Period-dependent requirement coverage      0IC_C01_Q0009
Value of stock on hand      0IC_C01_Q0010
Quantity of stock on hand      0IC_C01_Q0011
Material consumption      0IC_C01_Q0012
Material Movements      0IC_C01_Q0013
Consignment stock: receipts and issues      0IC_C01_Q0014
Valuated stock: receipts and issues      0IC_C01_Q0015
Material stock and movements      0IC_C01_Q0016
Material Movements (Healthcare)      0IC_C01_Q0020
Material Consumption (Healthcare)      0IC_C01_Q0021
Material Availability      0IC_C01_Q0022
Inventory Turnover Frequency (Value)      0IC_C01_Q0023
Consignment Stock Received and Issued per Unit      0IC_C01_Q0024
Material Consumption (Quantity)      0IC_C02_Q0001
Valuated Stock Receipts and Issues (Quantity)      0IC_C02_Q0002
Range of Valuated Stock (Quantity)      0IC_C02_Q0003
Inventory Turnover      0IC_C02_Q0004
Receipt and Issue Consignment Stock at Customer      0IC_C03_Q0001
Receipt and Issue Quality Inspection Stock      0IC_C03_Q0002
Vendor Consignment Stock Receipt and Issue      0IC_C03_Q0003
Receipt and Issue Stock in Transit      0IC_C03_Q0004
Receipt and Issue of Blocked Stock      0IC_C03_Q0005
Valuated Stock      0IC_C03_Q0006
Stock in Quality Inspection      0IC_C03_Q0007
Stock in Transit      0IC_C03_Q0008
Blocked Stock      0IC_C03_Q0009
Vendor Consignment Stock      0IC_C03_Q0010
Consignment Stock at Customer      0IC_C03_Q0011
Stock Overview      0IC_C03_Q0012
Stock Overview (as of 3.1 Content)      0IC_C03_Q0013
Quantities of Valuated Project Stock (as of 3.1 Content)      0IC_C03_Q0014
Valuated Stock (as of 3.1 Content)      0IC_C03_Q0015
Quantities of Valuated Sales Order Stock (as of 2.1 Cont.)      0IC_C03_Q0016
Inventory Turnover      0IC_C03_Q0017
Days' Supply      0IC_C03_Q0018
SUS: Vendor Consignment Stock      0IC_C03_Q0019
Scrap      0IC_C03_Q0020
Inventory Aging      0IC_C03_Q0021
Stock Overview - extended      0IC_C03_Q0022
Demand Supply Match      0IC_C03_Q0023
Warehouse Stock Analytics Inventory Turnover      0IC_C03_Q0024
Warehouse Analytics - Obsolescence and Variance      0IC_C03_Q0025
Stock Overview: Materials      0IC_C03_Q0030
Average Stock Value Over Time      0IC_C03_Q0031
Stock Overview Over Time      0IC_C03_Q0032
Range of Coverage Over Time      0IC_C03_Q0033
==================================================================================================
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Jan 18, 2010 8:06 AM

How to improve the query performance in to report level and designer level

How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......

first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr

How to improve the query performance or tune query from Explain Plan

Hi
The following is my explain plan for sql query. (The plan is generated by Toad v9.7). How to fix the query?
SELECT STATEMENT ALL_ROWSCost: 4,160 Bytes: 25,296 Cardinality: 204
     8 NESTED LOOPS Cost: 3 Bytes: 54 Cardinality: 1
          5 NESTED LOOPS Cost: 2 Bytes: 23 Cardinality: 1
               2 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 13 Cardinality: 1
                    1 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
               4 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCOUNTS Cost: 1 Bytes: 10 Cardinality: 1
                    3 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCOUNTS_U1 Cost: 1 Cardinality: 1
          7 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTIES Cost: 1 Bytes: 31 Cardinality: 1
               6 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTIES_U1 Cost: 1 Cardinality: 1
     10 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
          9 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
     15 NESTED LOOPS Cost: 2 Bytes: 29 Cardinality: 1
          12 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
               11 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
          14 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 1 Bytes: 17 Cardinality: 1
               13 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Cardinality: 1
     21 FILTER
          16 TABLE ACCESS FULL TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 2 Bytes: 1,127 Cardinality: 49
          20 NESTED LOOPS Cost: 2 Bytes: 21 Cardinality: 1
               18 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
                    17 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
               19 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Bytes: 9 Cardinality: 1
     23 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
          22 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
     45 NESTED LOOPS Cost: 4,160 Bytes: 25,296 Cardinality: 204
          42 NESTED LOOPS Cost: 4,150 Bytes: 23,052 Cardinality: 204
               38 NESTED LOOPS Cost: 4,140 Bytes: 19,992 Cardinality: 204
                    34 NESTED LOOPS Cost: 4,094 Bytes: 75,850 Cardinality: 925
                         30 NESTED LOOPS Cost: 3,909 Bytes: 210,843 Cardinality: 3,699
                              26 PARTITION LIST ALL Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
                                   25 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_HEADERS Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
                                        24 INDEX SKIP SCAN INDEX XLA.XLA_AE_HEADERS_N1 Cost: 264 Cardinality: 1,398,115 Partition #: 29 Partitions accessed #1 - #18
                              29 PARTITION LIST ITERATOR Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
                                   28 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_LINES Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
                                        27 INDEX RANGE SCAN INDEX (UNIQUE) XLA.XLA_AE_LINES_U1 Cost: 1 Cardinality: 1 Partition #: 32
                         33 PARTITION LIST ITERATOR Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
                              32 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_DISTRIBUTION_LINKS Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
                                   31 INDEX RANGE SCAN INDEX XLA.XLA_DISTRIBUTION_LINKS_N3 Cost: 1 Cardinality: 1 Partition #: 35
                    37 PARTITION LIST SINGLE Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 38
                         36 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_EVENTS Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 39 Partitions accessed #2
                              35 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_EVENTS_U1 Cost: 1 Cardinality: 1 Partition #: 40 Partitions accessed #2
               41 PARTITION LIST SINGLE Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 41
                    40 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_TRANSACTION_ENTITIES Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 42 Partitions accessed #2
                         39 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_TRANSACTION_ENTITIES_U1 Cost: 1 Cardinality: 1 Partition #: 43 Partitions accessed #2
          44 TABLE ACCESS BY INDEX ROWID TABLE GL.GL_CODE_COMBINATIONS Cost: 1 Bytes: 11 Cardinality: 1
               43 INDEX UNIQUE SCAN INDEX (UNIQUE) GL.GL_CODE_COMBINATIONS_U1 Cost: 1 Cardinality: 1

damorgan wrote:
Tuning is NOT about reducing the cost of i/o.
i/o is only one of many contributors to cost and only one of many contributors to waits.
Any time you would like to explore this further run this code:
SELECT 1 FROM dual
WHERE regexp_like(' ','^*[ ]*a');but not on a production box because you are going to experience an extreme tuning event with zero i/o.
And when I say "extreme" I mean "EXTREME!"
You've been warned.I think you just need a faster server.
SQL> set autotrace traceonly statistics
SQL> set timing on
SQL> select 1 from dual
2 where
3 regexp_like   (' ','^*[ ]*a');
no rows selected
Elapsed: 00:00:00.00
Statistics
          1 recursive calls
          0 db block gets
          0 consistent gets
          0 physical reads
          0 redo size
        243 bytes sent via SQL*Net to client
        349 bytes received via SQL*Net from client
          1 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          0 rows processedRepeated from an Oracle 10.2.0.x instance:
SQL> SELECT DISTINCT SID FROM V$MYSTAT;
       SID
       310
SQL> ALTER SESSION SET EVENTS '10053 TRACE NAME CONTEXT FOREVER, LEVEL 1';
Session altered.
SQL> select 1 from dual
2 where
3 regexp_like   (' ','^*[ ]*a');The session is hung. Wait a little while and connect to the database using a different session:
COLUMN STAT_NAME FORMAT A35 TRU
SET PAGESIZE 200
SELECT
STAT_NAME,
VALUE
FROM
V$SESS_TIME_MODEL
WHERE
SID=310;
STAT_NAME                                VALUE
DB time                                   9247
DB CPU                                    9247
background elapsed time                      0
background cpu time                          0
sequence load elapsed time                   0
parse time elapsed                        6374
hard parse elapsed time                   5997
sql execute elapsed time                  2939
connection management call elapsed        1660
failed parse elapsed time                    0
failed parse (out of shared memory)          0
hard parse (sharing criteria) elaps          0
hard parse (bind mismatch) elapsed           0
PL/SQL execution elapsed time               95
inbound PL/SQL rpc elapsed time              0
PL/SQL compilation elapsed time              0
Java execution elapsed time                  0
repeated bind elapsed time                  48
RMAN cpu time (backup/restore)               0Seems to be using a bit of time for the hard parse (hard parse elapsed time). Wait a little while, then re-execute the query:
STAT_NAME                                VALUE
DB time                                   9247
DB CPU                                    9247
background elapsed time                      0
background cpu time                          0
sequence load elapsed time                   0
parse time elapsed                        6374
hard parse elapsed time                   5997
sql execute elapsed time                  2939
connection management call elapsed        1660
failed parse elapsed time                    0
failed parse (out of shared memory)          0
hard parse (sharing criteria) elaps          0
hard parse (bind mismatch) elapsed           0
PL/SQL execution elapsed time               95
inbound PL/SQL rpc elapsed time              0
PL/SQL compilation elapsed time              0
Java execution elapsed time                  0
repeated bind elapsed time                  48
RMAN cpu time (backup/restore)               0The session is not reporting additional CPU usage or parse time.
Let's check one of the session's statistics:
SELECT
SS.VALUE
FROM
V$SESSTAT SS,
V$STATNAME SN
WHERE
SN.NAME='consistent gets'
AND SN.STATISTIC#=SS.STATISTIC#
AND SS.SID=310;
     VALUE
       163Not many consistent gets after 20+ minutes.
Let's take a look at the plan:
SQL> SELECT SQL_ID,CHILD_NUMBER FROM V$SQL WHERE SQL_TEXT LIKE 'select 1 from du
al%';
SQL_ID        CHILD_NUMBER
04mpgrzhsv72w            0
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('04mpgrzhsv72w',0,'TYPICAL'))
select 1 from dual where regexp_like   (' ','^*[ ]*a')
NOTE: cannot fetch plan for SQL_ID: 04mpgrzhsv72w, CHILD_NUMBER: 0
      Please verify value of SQL_ID and CHILD_NUMBER;
      It could also be that the plan is no longer in cursor cache (check v$sql_p
lan)No plan...
Let's take a look at the 10053 trace file:
Registered qb: SEL$1 0x19157f38 (PARSER)
signature (): qb_name=SEL$1 nbfros=1 flg=0
    fro(0): flg=4 objn=258 hint_alias="DUAL"@"SEL$1"
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM:   Checking validity of predicate move-around in SEL$1 (#0).
CBQT: Validity checks failed for 7uqx4guu04x3g.
CVM: Considering view merge in query block SEL$1 (#0)
CBQT: Validity checks failed for 7uqx4guu04x3g.
Subquery Unnest
SU: Considering subquery unnesting in query block SEL$1 (#0)
Set-Join Conversion (SJC)
SJC: Considering set-join conversion in SEL$1 (#0).
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM:   Checking validity of predicate move-around in SEL$1 (#0).
PM:     PM bypassed: Outer query contains no views.
FPD: Considering simple filter push in SEL$1 (#0)
FPD:   Current where clause predicates in SEL$1 (#0) :
          REGEXP_LIKE (' ','^*[ ]*a')
kkogcp: try to generate transitive predicate from check constraints for SEL$1 (#0)
predicates with check contraints: REGEXP_LIKE (' ','^*[ ]*a')
after transitive predicate generation: REGEXP_LIKE (' ','^*[ ]*a')
finally: REGEXP_LIKE (' ','^*[ ]*a')
apadrv-start: call(in-use=592, alloc=16344), compile(in-use=37448, alloc=42256)
kkoqbc-start
            : call(in-use=592, alloc=16344), compile(in-use=38336, alloc=42256)
kkoqbc-subheap (create addr=000000001915C238)Looks like the query never had a chance to start executing - it is still parsing after 20 minutes.
I am not sure that this is a good example - the query either executes very fast, or never has a chance to start executing. But, it might still make your point physical I/O is not always the problem when performance problems are experienced.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

How to find database query

Hi all,
how to find physical query from report here m checking like Administrator->manage session--> report-->view log
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- SQL Request:
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- General Query Info:
Repository: Star, Subject Area: AAA, Presentation: AAA
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- Cache Hit on query:
Matching Query: Created by: Administrator
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- Query Status: Successful Completion
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- Physical Query Summary Stats: Number of physical queries 1, Cumulative time 0, DB-connect time 0 (seconds)
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- Rows returned to Client 6
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- Logical Query Summary Stats: Elapsed time 0, Response time 0, Compilation time 0 (seconds)
but here m not able to find database query..how to find that query plz help
Edited by: Sonal on Jan 3, 2011 5:29 AM
Edited by: Sonal on Jan 3, 2011 5:30 AM
Edited by: Sonal on Jan 3, 2011 5:30 AM

Hi,
as Daan said, set the variable in Advanced tab but not on loglevel..
because, our problem is to bypass the bi-server cache.
Do this:
1. Go to Advanced tab.
2. In Prefix field(scroll down to see this field) , enter this:
SET DISABLE_CACHE_HIT = 1;
Note: Make sure that you're ended up above statement with semicolon and do not click on Set SQL option...
3. Save report, then run it..
4. After you see the query, i recommend you to take take out that prefix tag then save it again..

How to excute a query in an other form

Similar Messages

Maybe you are looking for