How to execute Struts program in jdeveloer(Oracle) with small example

Hi,
I want a small example on struts in Jdeveloper & how to diploy there.
Thanks & Regards
Rama Krishna

Hi
Check the link below for using jdeveloper with struts:
http://www.oracle.com/technology/products/jdev/howtos/jsp/StrutsHowTo.html.
I am not aware whether Jdeveloper can be used with SAP web AS , if that's what you are looking at?
hope this helps , <b>please mark points for helpful answers</b>
regards
rajeshkr

Similar Messages

How to run Struts program with the help of tomcat

Hello Everybody
This is Adesh.I am a newcomer of java and facing a problem with struts, so if any one know how to set the path of struts and how to run struts program, so plz inform me.
THX in Advance.............................................

struts-config.xml
<struts-config>
<action-mappings>
     <action path = "/welcome"
                type = "Welcome"
                scope="session">
            <forward name="success" path=".welcome"/>
            <forward name="failure" path=".base.error"/>
     </action>
</action-mappings>
    <plug-in className="org.apache.struts.tiles.TilesPlugin">
        <set-property property="definitions-config" value="/WEB-INF/tiles-defs.xml"/>
        <set-property property="definitions-debug" value="1"/>
        <set-property property="definitions-parser-details" value="0"/>
        <set-property property="definitions-parser-validate" value="true"/>
    </plug-in>
</struts-config>tiles-defs.xml
<tiles-definitions>
     <definition name = ".base" path = "/include/template.jsp">
          <put name = "title" value = "${title}"/>
          <put name = "header" value = "/include/top.jsp"/>
          <put name = "body" value = "${body}"/>
          <put name = "footer" value = "/include/footer.jsp"/>
     </definition>
</tiles-definitions>web.xml
<servlet>
        <servlet-name>action</servlet-name>
        <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
        <init-param>
            <param-name>config</param-name>
            <param-value>/WEB-INF/struts-config.xml</param-value>
        </init-param>
<init-param>
            <param-name>definitions-config</param-name>
            <param-value>/WEB-INF/tiles-defs.xml</param-value>
        </init-param>
        <load-on-startup>1</load-on-startup>
    </servlet>
<servlet>
        <servlet-name>init</servlet-name>
        <servlet-class>Init</servlet-class>
        <load-on-startup>2</load-on-startup>
    </servlet>
    <servlet-mapping>
        <servlet-name>action</servlet-name>
        <url-pattern>*.do</url-pattern>
    </servlet-mapping>
<jsp-config>
    <taglib>
        <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/wall.tld</taglib-uri>
        <taglib-location>/WEB-INF/wall.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/c.tld</taglib-uri>
        <taglib-location>/WEB-INF/c.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fn.tld</taglib-uri>
        <taglib-location>/WEB-INF/fn.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fmt.tld</taglib-uri>
        <taglib-location>/WEB-INF/fmt.tld</taglib-location>
    </taglib>
</jsp-config>
    <resource-ref>
        <description>DB Connection</description>
        <res-ref-name>jdbc/SQLServerDB</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>
</web-app>This should help....

How to execute java programs in xcode

I cannot execute Java program in XCode for Mountain Lion 10.8.2. Please help me how to execute a Java program.

Do you have a particular error or message or diagnostic or issue, or something that's particularly wrong with Xcode? If installed, Java does work, and Java applications can be invoked.
Background: Java was deprecated from OS X a while back, and Java itself was removed from the default OS X 10.8 installation.
Given that Java is now an add-on for OS X, you'll want to check with Oracle — the owner of Java — for OS X kits and tools.
I don't know off-hand if Xcode still particularly supports Java (it was pretty weak, when last I checked), but I'd expect you'll be using makefiles for the work, and I'd also suspect that whatever Java support remains in Xcode will probably be going away in some future version of Xcode. (If support hasn't already disappeared. You may be using bash build scripts and makefiles to deal with Java now, or going forward.)
If you don't have access to the Apple developer forums and the discussions of tools available there, then the archives of the Apple Java-Dev mailing list can be a good spot to look for existing discussions, and to post questions related to Java development on OS X.
As for IDEs other than Xcode, Eclipse or NetBeans or IntelliJ IDEA, and BlueJ all run on OS X, and any of these would probably be a better long-term choices for Java development on OS X.

How to execute external program in java?

My question is how to execute an external program in java.
I need to call a unix command in java.
Thanks.

it depends on what you are trying to do. Following are the two methods
1. Runtime.exec() : this method allows you just to call an external program as a seperate process
2. JNI (Native Interface) :- As of right now only C and C++ are supported by this method. This method allows you to directly call the C/C++ methods from JAVA

How to execute CGI Programs in Tomcat Server

Hi,
I am working on executing Perl Scrtipts(or CGI programs) in Tomcat Server.
I have downloaded ActivePerl 5.8.0 6.0.3 build.I have modified some .jar files in tomcat\server\lib.
I have changed conf\web.xml to access the CGIServlet.class that is in servlets-cgi.jar.
My example.cgi is
#!c:\Perl\bin\perl.exe
print
"Content-type: text/plain\n\n";
foreach $var (
sort keys %ENV) {
print
"$var=\"$ENV{$var}\"\n";
@values = split(
/&/,$ENV{'QUERY_STRING'});
foreach $i (@values) {
($varname, $mydata) = split(
/=/,$i);
print "$varname = $mydata\n";
and my test.html is
<HTML>
     <HEAD>
          <TITLE>Environment Variables using GET</TITLE>
     </HEAD>
     <BODY>
          <FORM ACTION="cgi-bin/example.cgi" METHOD="POST">
               Press submit for a list of environment variables. <BR>
               First Name: <input type="text" name="fname" size=30><p>
               Last Name: <input type="text" name="lname" size=30><p>
               <input type="submit">
          </FORM>
     </BODY>
</HTML>
here I have changed url mapping in web.xml to cgi-bin.
The test.html produces two text fields first and last name on submit:
it accesses:http://localhost:8080/smalltownpapers/cgi-bin/example.cgi?fname=Tim&lname=Eden
this should print some environmental variables but it is producing an empty page.
Tomcat is not showing any errors or Tomcat is not at all listening.
Can any one help me to solve this and how to execute Perl scripts in Tomcat server
Thanks,
Regards
Murthy

Sorry, I've never done this. I went to the Tomcat site and pulled down the CGI docs, which you might have seen:
http://jakarta.apache.org/tomcat/tomcat-5.0-doc/cgi-howto.html
No other help available from me. Sorry.

How to execute modulepool program

hi all,
how to execute programming type M
plz send detail informaton regarding that one

Hi
You cannot execute a Module pool program as you execute other ABAP programs.
For executing a Module pool program, <b>create a z-transaction code</b> for that M-program
& then execute the z-transaction code.
Goto Transaction <b>SE93</b> to create a z-transaction code for that m-program.
Then execute the Z-Transaction code.
Kindly reward points for helpful answers!
Best regards,
Thangesh

How to execute a program from another

Hi, expert
Sorry for this question, but how can I do to execute a program from another with no parameter.
I will thanks an answer, it's urgent...
Regardss,
mgg
P.D. Points rewarded.

Simple, use the SUBMIT statement.
SUBMIT zreport and return.
Regards,
RIch HEilman

How to run the program in back ground with out selection screen ?

Hi,
I want to run the program in back ground but don't have selection screen. How to run this program in back ground
as program has no selection screen.
Waiting for quick response.
Best Regards,
Padhy
Moderator message: basic, please search for available information/documentation.
Edited by: Thomas Zloch on Feb 21, 2011 12:43 PM

Hi,
Go to transaction SE38 --> Execute --> Background.
If your program contains selection screen, you have to pass your input values as variants.

How to execute a scenario File to File with SAP XI ?

Hi all,
I'm starting study SAP XI, i see in the link follow:
[http://www.****************/Tutorials/XI/File2File/page8.htm]
a scenario to exchange file to file with SAP XI.
After designing and configuration everything (same as tutorial of this scenario), i don't known how to execute this scenario.
Anyone can answer my question: how to execute this scenario file to file?
Please see the link below to understand more about this scenario.
Thanks all a lot in advance,
Point will be reward for any valuable answer.
Vinh Vo

Hi Vinh,
Hope u read all the basic documents of the XI, if not please go through once u wil come to know how to execute a scenario.
the step-by-step procedure for a simple file-file scenario...
First u have to finish the Design Part in the IR
1) Create Data types
2) Create Message Types
3) Create Message Interface
4) Message Mapping
5) Message Interface.
Here it complete the desing part.
Then start thr configuration:-
1) Create the Configuration Scenario
2) Create the Business system and create the Communication Channel.
3) Sender Agreement
4) Receiver Determination
5) Interface Determination
6) Receiver Determination.
If u perfome this steps u wil be successfully complete u r File- File Scenario.
follow the below link to have clear picture of file-file scenario
STEP1:-
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
STEP2:-
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii
Hope this helps u a lot.....
Thankx
Anil
Edited by: Venkat Anil Gannavarapu on Jun 11, 2008 11:36 AM
Edited by: Venkat Anil Gannavarapu on Jun 11, 2008 11:40 AM

HT1277 how to configure mail OSX 10.9 (iMac) with Small Business Server 2003 ?

How to set up mail on brand new iMac OSX 10.9 with Small Business Server 2003

Can you clarify a little more? What part of SBS are you referring to when logging in? Via VPN? Remote Web Workplace? Etc?
I administer a SBS2003 network and actually use a Macbook to do it all. Hopefully I'll be able to help!

How to execute command(program) from external file in Oracle SQL developer

Hi,
Does anyone know, Oracle SQL developer version 1.0.0.14.67 got any function that can execute command from an external file?
Example, i have 100 insert SQL inside a text file,
and i want to use Oracle SQL developer to execute it. How do i read from my text file? Thanks a lots.

If you're new to Oracle, do yourself and us a favour: read some tutorials and manuals. What sqldev's worth, better download the latest version (1.1.2), lots of fixes and enhancements...
Now for the big popper: to run an external file: @file
Best of luck,
K.

How to execute multiple sql statements in oracle?

I want to execute multiple statements in a single transaction in oracle. Following are my queries:
Create table temp_table as Select * from table;
SELECT * FROM temp_table d;
drop table temp_table ;
I am using sql comment text in asp.net
I am using executenonquery command in asp.net.
Thanks,
Divya

SigCle ,
Here's an example that executes 3 statements;
begin insert into foo values(1); insert into foo values(2); insert into foo values(3); end;
923354,
The block doesn't compile because temp_table doesn't exist at the point you're trying to compile the anonymous block. I'd recommend re-reading the doc link and forum link provided to get a better understanding of how temp tables work, as it's simply different with Oracle. You don't create Oracle temporary tables on the fly; you create them ahead of time and then just use them. The data itself is already specific to a particular session; you don't create and drop the table each time.
Also, you can't just "select * from table" in plsql. The results have to GO SOMEWHERE. Usually you'd either open a cursor and process it in the block, or send out a ref cursor if you want to send the data to a client side app. The ref cursor data wouldn't actually be fetched until the block completes though, so you'd need to use ON COMMIT PRESERVE ROWS, which would also mean you'd need to clean up the data yourself (delete the data from the table when you're done with it).
Corrections/comments welcome.
Greg

How to execute Java program in Solaris 8 (Intel Platform).

Hello All,
I have installed Solaris 8 on my Intel based PC. JDk 1.1 and JDK 1.2 is installed by default. When I compile any Java applet or Application, it successfull complies but when I try run that applet or application (java Appletname or applicationname), It gives the error message .... File not found...Check whether file exist in the directory or not.
Can someone tell me the reason of this error and how to correct it. Where to set the CLASSPATh etc. under Solaris 8 for successful compilation and run of programs. I do not have any problem under Windows/2000.
Thanks in advance,
Amoid

[amoyeed],
Hello All,
I have installed Solaris 8 on my Intel based PC. JDk
1.1 and JDK 1.2 is installed by default. When I
compile any Java applet or Application, it successfull
compliesI will assume that you executed this command:
#javac <java source code filename>.java
In order to find out which version of the javac you are using to compile the program, execute the following:
#/usr/bin/which javac
The output will tell the exact path to the javac binary file.
but when I try run that applet or application
(java Appletname or applicationname), It gives the
error message .... File not found...Check whether file
exist in the directory or not.You probably have not set the current directory to your environment variable PATH for the Unix shell that you are using.
You can do the following:
#java ./<standalone application or applet name>
Can someone tell me the reason of this error and how
to correct it. Where to set the CLASSPATh etc. under
Solaris 8 for successful compilation and run of
programs.In the shell environment settings file. Which Unix shell are you using? Bourne, Korn or C?
I do not have any problem under Windows/2000.
Thanks in advance,
AmoidHTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

How to execute sapscript programe in SAP

hi
i created sapscript programe i want to execute how can i do it please help me
thanks in advanced.

Hi,
two ways.
1. Simply by executing program by F8 and giving values in selection screen. You have used FMs like open_form and write_form and close_form etc. hence form will be called
2. Form and print program will be assigned to output type in NACE transaction.
Now this will be called when via standard transaction like VA03 -> print option and set output type
at this time based on output type print progral will be called.
*Hope this may give you a bit of idea.

Plz help me how to execute jsms program

hi,
i hv downloaded jsms package, in that i hv total source code for sending and receiving msgs, but i am unable to do run that application, cany any one tell me how can i run that program,
i hv already configure required jar and properties files into my java folder, now how can i execute that application.

What is JSMS? It's not part of Sun's distributions.

How to execute Struts program in jdeveloer(Oracle) with small example

Similar Messages

Maybe you are looking for