How to execute the Code-Behind of .aspx linked using XML Data Connection
I have a dashboard with a live XML Data Connection tied to a Default.aspx file. That .aspx file has a Default.aspx.vb code-behind file tied to it with some logic in the Page_Load sub routine. If i open the .aspx on my own in the browser, the code-behind executes properly.
However, when I tie the .aspx to my dashboard and launch it I know for a fact the .aspx is being called (i have a placeholder on the dashboard to let me know if it executed or not) but its code-behind file is not. I can't seem to find a solution through Google, would anyone be able to lead me in the right direction with this? My code is as follows:
Default.aspx
<%@ Page Language="vb" aspcompat="true" Debug="true" validaterequest="false" AutoEventWireup="false" CodeBehind="Default.aspx.vb" Inherits="scheduleAppointment._Default" %>
<%
'tester to see that script executes, this puts "ScriptExecuted" on a label on my dashboard
Dim sXML As String
sXML = "<data><variable name=" + Chr(34) + "Range_0" + Chr(34)
+ "><row><column>ScriptExecuted</column></row></variable></data>"
Response.Write(sXML)
%>
Default.aspx.vb
Imports Microsoft.Office.Interop
Partial Public Class _Default
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
(I have code here creating a Microsoft Outlook appointment and saving/scheduling it. This is not being
executed when running the dashboard itself, but I know the code works if I run the .aspx on my own
in Internet Explorer browser)
End Sub
End Class
Easy fix, apparently code-behind doesn't execute in Preview mode. Exported to .swf and ran in the Internet Explorer browser and it worked.
Similar Messages
-
How to write the code for a panel when using treeview?
Hi,
We are developing a new plug-in in Indesign as based on treeview. we have completed the design part, but we have some doubts in coding..
One dialog widget and three panels(General, fitting, Eventsandscripts).
The .fr file:
resource GeneralPanelWidget (kGeneralPanelResourceID)
__FILE__, __LINE__,
kGeneralPanelWidgetID, // WidgetId
kPMRsrcID_None, // RsrcId
kBindNone, // Frame binding
Frame(0,0,800,500) // Frame
kTrue, // Visible
kTrue, // Enabled
kGeneralPanelTitleKey, // Panel name
StaticTextWidget
kInvalidWidgetID, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 15, 138, 35, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefProjectPathStringKey, // Initial text.
ksamPrefProjectPathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefProjectPathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame(140, 15, 420, 35), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseProjectButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 15, 500, 35,
kTrue, kTrue,
ksamChooseBtnStringKey,
StaticTextWidget
0, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 45, 138, 65, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefImagePathStringKey, // Initial text.
ksamPrefImagePathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefImagePathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame(140, 45, 420, 65), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseImgpathButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 45, 500, 65,
kTrue, kTrue,
ksamChooseBtnStringKey,
StaticTextWidget
0, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 75, 138, 95, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefMasterTempPathStringKey, // Initial text.
ksamPrefMasterTemplatePathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefMasterTemplatePathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame 85
Frame(140, 75, 420, 95), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseMasterTempButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 75, 500, 95,
kTrue, kTrue,
ksamChooseBtnStringKey,
CheckBoxWidget
ksamShowFrameLabelCheckBoxWidgetID, // WidgetId
kSysCheckBoxPMRsrcId, // RsrcId
kBindNone,
Frame( 10, 165, 320, 185) // left, top, right, bottom
kTrue, // Visible
kTrue, // Enabled
kAlignLeft, // Alignment
ksamShowFrameLabelChkBoxTextKey // Initial text
DefaultButtonWidget
kOKButtonWidgetID, // WidgetID
kSysButtonPMRsrcId, // RsrcID
kBindNone, // Binding
320, 380, 390, 400, // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
ksamPrefSaveStringKey, // Button text
CancelButtonWidget
kCancelButton_WidgetID, // WidgetID
kSysButtonPMRsrcId, // RsrcID
kBindNone, // Binding
400, 380, 470, 400, // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
ksamPrefCancelStringKey, // Button name
kTrue, // Change to Reset on option-click.
This is for General panel design and we have written the code for this..but we dont know where to call this functions. we implemented this plug-in based on BasicSelectableDialog sample plug-in. please guide me to complete this code.
Thanks in Advance..Your question is not very clear. Have you gone through the PanelTreeView.sdk example in the sdk?
-
How to write ABAP code behind, the OLAP navigation functions
Hi SDN Community,
We have created an artificial hierarchy within BEx, using order structure elements, or characteristic key figures as SAP calls them.
Now, the only feature that dosent seem to be present within the OLAP, is to expand all hiearchy nodes.
It allows you to expand one hierarchy node, but not all the structure element nodes.
I have tried command sequencing by specifying the technical id's of the the structure elements found via RSRT2, but this dosen't work.
I have seen that when the nodes are expanded, that there is indeed standard SAP ABAP code executing back in the datawarehouse.
Hence, do you know
- Where to make ABAP enhancements for OLAP functionality
- How to execute this ABAP (will it be by using Web API and javascript enhancements)
- Is this possible, or has it been done by anyone?
Thank you.
SimonHi Thomas,
I have been working with a brilliant ABAP'er, and together we
implemented a solution in the START method, that makes use of the
following methods and expands all the hierarchy nodes at start.
And this class can be omitted in the Print all view we have formulated
as only a collapsed view has been specified there.
thank you.
Simon
I found this all in that class interface CL_RSR_REQUEST
for N_R_REQUEST
for N_R_DATA_SET
Initial Value: Set Drilldown State of a Hierarchy
Description: 'SET_DRILL_STATE'
this looks like the method that gets executed. what do you think?
can you code this in the program
constants C_CMD_SET_DRILL_STATE type RSRCMDID
value 'SET_DRILL_STATE'. "#EC NOTEXT
methods SET_DRILL_STATE
importing
value(I_AXIS) type RRXAXIS optional
value(I_POSITION) type I optional
value(I_FOCUS_IOBJNM) type RSIOBJNM optional
value(I_DRILLSTATE) type RRXDRILLSTATE optional
value(I_TOGGLE) type RS_BOOL default RS_C_FALSE
!I_R_PARAMETER type ref to CL_RSR_PARAMETER optional
exporting
!E_KEEP_LAST_LINES type I
!E_KEEP_FIRST_LINES type I
!E_NEW_LINES_FROM type I
!E_NEW_LINES_TO type I
!E_NODE_POSITION_FROM type I
!E_NODE_POSITION_TO type I
exceptions
NO_PROCESSING
X_MESSAGE . -
How to find out the code behind a button
Hi,
What technique should I use to find out what java code is invoked when I click on a button in the portal?
More concrete: I want to know the code behind the button I'm talking about <a href="https://forums.sdn.sap.com/thread.jspa?threadID=188251">here</a>.
T h a n k s !
JeroenI would suggest you use HTTPWatch in your browser to see what is happening behind you button click.
You can get it here
<a href="http://www.simtec.ltd.uk/">http://www.simtec.ltd.uk/</a> -
"Object Required" error when using the script block from the code behind
I try to use the following script block on the code behind page
<script defer='true' id='NavID' type='text/javascript'>Nav();</script>
and the function Nav() is on the .aspx page. It gives me the "Object Required" error message. BUT if I add an alert("hello!!!") line inside of the Nav() function, it works fine after the user closes the alert box. Has anyone experienced a similar problem? Please help. Thanks.There is no way to troubleshoot this by looking at a picture of the diagram. LabVIEW 6 is almost prehistory and many things have changed, especially the file IO all looks different so it is impossible to tell what you are doing.
Error 7 is file not found, so most likely your string operations are not correct. What are the full strings? What is the final file name (maybe you are missing a "\" or maybe you are on a different OS type). Put an indicator at the path wire to see what's happening!
Is this a datalog file?
(Overall, the code is a bit suspect. Nobody needs a seven frame flat sequence. ) Why do a control and an indicator have the same label?)
LabVIEW Champion . Do more with less code and in less time . -
How to write the code to send the report output to the local file.
dear all,
how to write the code to send the report output to the local file.
Thanks & Regards,
Jyothi.Hi,
Try this , it will display report and download the file as well. Just vhange the path and execute
TYPE-POOLS : SLIS.
DATA : IT_SCARR TYPE TABLE OF SCARR,
IT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
SELECT *
FROM SCARR
INTO TABLE IT_SCARR.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
* I_INTERNAL_TABNAME =
I_STRUCTURE_NAME = 'SCARR'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = IT_FCAT
* EXCEPTIONS
* INCONSISTENT_INTERFACE = 1
* PROGRAM_ERROR = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_STRUCTURE_NAME =
* IS_LAYOUT =
IT_FIELDCAT = IT_FCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IR_SALV_LIST_ADAPTER =
* IT_EXCEPT_QINFO =
* I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_SCARR
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
EXPORTING
* BIN_FILESIZE =
FILENAME = 'C:\Documents and Settings\sap\Desktop\Hi.xls' " Change path
* FILETYPE = 'ASC'
* APPEND = SPACE
* WRITE_FIELD_SEPARATOR = SPACE
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = SPACE
* WRITE_LF = 'X'
* COL_SELECT = SPACE
* COL_SELECT_MASK = SPACE
* DAT_MODE = SPACE
* CONFIRM_OVERWRITE = SPACE
* NO_AUTH_CHECK = SPACE
* CODEPAGE = SPACE
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = SPACE
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
* FILELENGTH =
CHANGING
DATA_TAB = IT_SCARR
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* NOT_SUPPORTED_BY_GUI = 22
* ERROR_NO_GUI = 23
* others = 24
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
DOCUMENT = 'C:\Documents and Settings\sap\Desktop\Hi.xls' "Change path
* APPLICATION =
* PARAMETER =
* DEFAULT_DIRECTORY =
* MAXIMIZED =
* MINIMIZED =
* SYNCHRONOUS =
* OPERATION = 'OPEN'
* EXCEPTIONS
* CNTL_ERROR = 1
* ERROR_NO_GUI = 2
* BAD_PARAMETER = 3
* FILE_NOT_FOUND = 4
* PATH_NOT_FOUND = 5
* FILE_EXTENSION_UNKNOWN = 6
* ERROR_EXECUTE_FAILED = 7
* SYNCHRONOUS_FAILED = 8
* NOT_SUPPORTED_BY_GUI = 9
* others = 10
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to execute the data in the form when the data is already avaliable
Hi,
I am working with forms 6i. I have a problem while executing the data in the form
Actually, the data is already present in the form. But when i run the form, the data is not displayed.
can anyone please help me how to execute the data. below is the code
Set_Alert_Property(alert_id,ALERT_MESSAGE_TEXT,'Do you want to refresh new Data for that Year and Field ? (it will take a time).') ;
SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON1, LABEL, 'Yes');
SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON2, LABEL, 'No');
SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON3, LABEL, 'Cancel');
button_number :=Show_Alert(alert_id) ;
synchronize;
if button_number != ALERT_BUTTON3 then
if button_number = ALERT_BUTTON1 then
:param.field := :control.f_cd;
:param.year := :control.year;
build_tables;
fields;
-- areas(:param.field);
PUT_PARAM;
COMMIT_FORM;
go_block('wet_criterias');
end if;
if button_number = ALERT_BUTTON2 then
:exhibits.field_display := :control.f_name || ' - Exhibits';
go_block('RESERVOIR');
execute_query;
end if;
end if;
end if;
else
message('Fields must be entered...');
end if;
else
message('Fields must be entered...');
end if;It's hard to know what logic you are trying to implement.
However, by looking at your code, it seems that if the user select 'Yes' to the question "Do you want to refresh", nothing is done except the go_block('wet_criterias'). Should there be an 'Execute_Query' ?
No idea... -
How to execute the method of a class loaded
Hi,
I have to execute the method of com.common.helper.EANCRatingHelper" + version
version may be 1,2, etc
if version = 1 the class is com.common.helper.EANCRatingHelper1;
Iam able to load the class using following code.But iam unable to execute the method of the above class
Can anybody help me how to execute the method of the class loaded.
Following is the code
String version = getHelperClassVersion(requestDate);
String helperClass = "com.redroller.common.carriers.eanc.helper.EANCRatingHelper" + version;
Class eancRatingHelper = Class.forName(helperClass);
eancRatingHelper.newInstance();
eancRatingHelper.saveRating(); This is not executing throwing an error no method.
ThankseancRatingHelper.newInstance();Ok, that creates an instance, but you just threw it away. You need to save the return of that.
Object helper = eancRatingHelper.newInstance();
eancRatingHelper.saveRating(); This is not executing throwing an error no method.Of course. eancRatingHelper is a Class object, not an instance of your EANCRatingHelper object. The "helper" object I created above is (though it is only of type "Object" right now) -- you have to cast it to the desired class, and then call the method on that.
Hopefully EANCRatingHelper1 and 2 share a common interface, or you're up the creek. -
How to get the queries behind a concurrent request
Hi to all
how to get the queries behind a concurrent request in oracle Apps R12
Regards ,
ZulqarnainIMHO you can not simple say that this query executed or another
because many queries can be executed by one cp
>
My actually problem is that, i want to know that when Cost Summary Report from FA Responsibility is running then this concurrent program also run another CP. Populate Balanace Report . This CP also attach with
Populate Balanace Report GT Data executable , This executable run FA_BALREP_PKG.populate_gt_table procedure.I want to know that which query is running for Cost Summary Report in above mention package.
>
it's look like that "Cost Summary Report from FA Responsibility" is main cp which generate the report based on some just-in-time data which generated by "Populate Balanace Report "
in other words
"FA_BALREP_PKG.populate_gt_table" populate data in some temp table for report and "Cost Summary Report" use it -
LSMW VD51 , Validations in Begin of Transaction; how to Debug the code?
Hi All,
I have written code for validations i Begin of Transaction in the field mapping 5th step of LSMW for VD51.
Now this code not getting triggered at the time of Conversion of Data. How to debug the code. I have put a static break point 'BREAK-POINT' still not getting triggered.
Any suggestion / solution for this issue.
Thanks and Regards,
Narsimha KulkarniHi Narshimha,
Make any mapping error during mapping and check the syntax of mapping it will drag you to the lsmw report there you can put your break point. You can check the report name from transaction code as well.
Remember this mapping block will execute when you execute the step Convert Data in LSMW.
Regards
Dhirendra -
How to execute the content of varchar as query
Hi everyone!
I did a PL/SQL region in apex, in this region I did the query which is storaged in a variable; it was did it concatenate several times,
in the procedure I have several sentences.
I thought that the command 'execute immediate' would get a good result but it do not print the result.
declare
variable varchar2(1000);
begin
--sentences
--execute inmmediate( variable );
--return variable
end;
I only want to how to execute the content of varchar variable.
For example, suppose that the result of this procedure is
'SELECT SYSDATE FROM DUAL'
How and what do I must do for this query execute like a normal query that is in apex?
I expect your prompt reply.
Thank you for your help.
Best regardsErik,
Try dropping this into a PL/SQL region
DECLARE
v_result VARCHAR2(500);
BEGIN
SELECT SYSDATE
INTO v_result
FROM DUAL;
htp.prn(v_result);
END;
{code}
use the htp.prn command to write html you want to display. In this case we are just writing the date to the screen.
Good luck,
Tyson -
How to execute javascript code in VBScript?
I'd like to execute similar javascript code for some particular PDF files(parameters for pagenumber are quite different),such as:
this.setPageLabels(0, [ "A", "", 3] );
this.setPageLabels(1, [ "r", "", 1] );
this.setPageLabels(16, [ "D", "", 1] );
How to write the code in VBScript?
Thanks in advance!
P.S. I try to add code but end up with error messages
=================================================================
path = "E:\test.pdf"
'//Write the first and last pagenumbers and label to a txt.
set oWs = CreateObject ("Wscript.Shell")
set fs = CreateObject("Scripting.FileSystemObject")
oWs.run "Acrobat.exe"
While not oWs.AppActivate("Adobe Acrobat") : Wscript.Sleep 1000 : Wend
Set objArgs = WScript.Arguments
if objArgs.Count = 1 then path = ObjArgs(0)
Set gApp = CreateObject("AcroExch.App")
Set AVDoc = CreateObject("AcroExch.AVDoc")
If (AVDoc.Open(Path,"")) Then
Set AVDoc = gApp.GetActiveDoc()
Set PDDoc = AVDoc.GetPDDoc()
Set JSO = PDDoc.GetJSObject
'// Write Bookmark JS to a variable
Ex = " var vTOC = """"; "&vbLF _
& " var s = """"; "&vbLF _
& " var i=0; "&vbLF _
& " p = i+1; "&vbLF _
& " vTOC += ( this.getPageLabel(i) +""|""); "&vbLF _
& " i= this.numPages-1 ; "&vbLF _
& " p = i+1; "&vbLF _
& " vTOC += ( this.getPageLabel(i) +""|""+p+""|""); "
' // Execute the JavaScript
Set AForm = CreateObject("AFormAut.App") 'from AFormAPI
AForm.Fields.ExecuteThisJavaScript EX
' // Write Bookmarks to CSV (PageNr;Level;Text)
Set JSO = PDDoc.GetJSObject '//->renew JSO for some unknown reasons
xf = jso.vToc
Set objIE = CreateObject("InternetExplorer.Application")
objIE.Navigate("about:blank")
objIE.document.parentwindow.clipboardData.SetData "text", xf
objIE.Quit
CsvFN = left(path, InstrRev(path, ".")-1) &"_page.txt"
set FL = fs.OpenTextFile(CsvFN, 2, true) '//-> 2=ForWriting
xWr = split(xf,"|")
for x=0 to UBound(xWr)
FL.WriteLine xWr(x)
next
FL.Close
Else
MsgBox "Failed to Open: " & Path
End If
Set JSO = Nothing
Set PDDoc = Nothing
Set AVDoc = Nothing
Set AForm = Nothing
Set gApp = NothingIf I remember right, I wrote this script a while back to demonstrate how java script can be direct executed and how you can get back the results. Didn't I wrote a commentary to that?
However the parts you need:
' // Write JS code from help file or whatever to a VBS variable:
JsFromHelp = " this.setPageLabels(0, [ ""A"", """", 3] ); "&vbLF _
& " this.setPageLabels(1, [ ""r"", """", 1] ); "&vbLF _
& " this.setPageLabels(16, [ ""D"", """", 1] ); "
' // Execute the JavaScript
Set AForm = CreateObject("AFormAut.App") 'from AFormAPI
AForm.Fields.ExecuteThisJavaScript JsFromHelp
From the rest keep only:
end if
set .. = nothing
Untested, but should work - as far as you have a little bit more then only Reader.
HTH, Reinhard -
How to execute the valuechangelistener thru javascript ?
Hi,
JDev 11.1.1.6
How to execute the valuechangelistener thru javascript ?
Regards,
Gopiwe need to use ClientListener and ServerListener for calling the method.
please refer the below threads, these includes the code.
how to call backing bean method from java script
Calling the Managed bean class method from javascript on page load
regards,
Rajan -
How to execute the transaction SCI
Hi All,
How to execute the transaction SCI
Thank you,
Sridhar.Hai ,
there are two ways to use SCI , one is you open you code in se38 -->display mode --> Program >check>code inspector. here your program is executed with a dafault variant provided in SCI.
Second method is go to SCI , create a inspection an choose a variant , here system provide you with a wide range of program checks (security/syntax etc)
For any further help.
Do reply.
Regards
Jase -
How to check the code of spawned report
Hi All,
I've to modify a standard report from PA module.The report name is "PRC: Distribute Usage and Miscellaneous Costs"
The executable method is SPAWNED.The executable name is PASDUC.
Please let me know how to check the code of this report and in which path can I locate the report.
Regards,
Mahi.Does this mean can I tell to my client that "This is being a spawned program, any customizations to this report needs full report development efforts"?I believe yes.
Before I state this to my client I want to verify with this forum. Please suggest me in either case.Would your client trust my reply on here :) ?
I would suggest you log a SR and confirm this with Oracle support, that would be a better proof.
Thanks,
Hussein
Maybe you are looking for
-
A link to other pdf files not working in only Android OS. How Can I fix it ?
If there is many folders and pdf files in there and a pdf file is at root and the root pdf file has many link to pdf files. In Windows OS links work well. but In Android OS, not working. when I click links, there is no difference. How can I fix it?
-
Problem starting Business Rule service ver 3.5
Hi - I installed Business Rules ver 3.5.1 on our Windows Server 2003. I noticed the hbr service was not running, so I tried running the starthbr.bat file, but I got an error message: java.lang.ClassNotFoundException: com.hyperion.br.rmi.HBRImpl_stub
-
Is oracle9iA server needed to run Toplink
I am new to Toplink, and just doing evaluation. I would like to know if I need to run the oracle9iA server in order to run Toplink? Or can I run toplink as a separated product? Thanks
-
Two beeps when an incoming call gets connected
Since a couple of weeks ago I started hearing 2 beeps when an incoming call gets connected. I can only hear these 2 beeps when I use my headset (original iphone headset) to answer the call. I hear these 2 sounds right after I answer the call and then
-
Hi All, can anyone help me. I work with purchase requisition. Is it possible to implement Metafield (mmpur_metafield) for message errors treatment (mmpur_message_forced)? Because the message errors withd the cursor position are not OK. I added new cu