How to execute the query from different blocks in Forms

Hi,
Curently I have a case where I need to execute the query from some other block. I used
l_curr_item VARCHAR2(62) := :SYSTEM.CURSOR_ITEM;
Go_Block ('BLOCK2');
Execute_Query;
Go_Item(l_curr_item);
This works fine , but as I am using Go_Block it does some other activities related to that block, which I dont want them to get executed.
So can any one please suggest me how I can call the query alone without using the Go_Block .
Thank you.

you can set global variable and filter for this variable in the triggers of blocks the actions then you avoid the code of trigger and you can use go_block

Similar Messages

How to execute the query for a block based on the parameter

Hi All,
Good evening.
i have requirement where i need to display the data in one block based on the selected items.
the scenario is like this...there are 2 LOV's and one apply button and one external region on the form.
so when u select the lov values and click on apply button the query should execute based on this 2 lov values.
i am not getting how to achieve this..i am very new to oracle forms..
Please Help..
Thanks
Bharat
please help..it is urgent..
thanks
bharat
Edited by: Bharat on Jan 31, 2012 5:19 AM

Bharat wrote:
Hi All,
Good evening.
i have requirement where i need to display the data in one block based on the selected items.
the scenario is like this...there are 2 LOV's and one apply button and one external region on the form.
so when u select the lov values and click on apply button the query should execute based on this 2 lov values.
i am not getting how to achieve this..i am very new to oracle forms..Another way you can do this. Create a lov and don't assign it to any column just one return item (should be id).
Now create a button may be your "apply button" write two trigger when-button-press and when-mouse-click.
at When -Button-Press trigger, change the block state to 'ENTER-QUERY' and at when-mouse-click show the LOV and then write execute_query.
Hope this will help you.
If someone's response is helpful or correct, please mark it accordingly.

0ADHOC error while executing the query from Report Designer

Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVR

Hi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine

How to execute the job from script ??

How to execute the job from script ?? i have 2 jobs A AND B . I want to execute job B from job A'S Script ?? how can i ??

Hi Kishore,
Please refer the below link for BODS Job execution using Script
Executing a job by another job in BODS 4.1 using simple script
http://scn.sap.com/community/data-services/blog/2013/12/04/executing-a-job-by-another-job-in-bods-41-using-simple-script
Steps for executing BODS job from Unix Script with user defined global parameters
http://scn.sap.com/community/data-services/blog/2013/09/02/steps-for-executing-bods-job-from-unix-script-with-user-defined-global-parameters
Executing a job using batch file
http://scn.sap.com/thread/3503338
How to add a schedule for job2 with a condition after job 1 is finished
http://scn.sap.com/message/14523514#14523514
Scheduling BODS Jobs Sequentially and Conditionally
http://scn.sap.com/docs/DOC-34648
Thanks,
Daya

Please help on how Bex execute the query designed in query designer.

Hi All,
Want to know how bex execute/interpret the query when the query is execute in analyzer.
I mean which part of the query is executed first, like filter,RKF or CKF etc.
Want to do step by step analysis .Please suggest on this.
Thanks & Regards
Sameer Khan

HI,
When u execute the query...It will fetch the Global filters data first ....means filters on Default values....then restrictions on Char Restriction pannnel....Then calculate the RKF and CKF,s....Conditions and Exeptions etc.......
Thanks

How to get the value from another report Customizes Form

Dear all,
I create a report such as
select * from mytable.table1
where field1 = :bind_variable
I create a menu to run this Customized Form and user have to select the bind_variable values. So I have another report created which also want this bind_variable as it WHERE Clause. But I don't want my user to key the same bind variable twice. They can just same the Customized Form and run for both report.
Could anybody know how to get the bind_variable on 1st report and used by the 2nd report.
Thank you very much.
Best Rgds,
SL Voon

Hi,
are you on BI7.0? There you can create variables type replacement path and get the value out from a different variable without any coding.
regards
Cornelia

How to execute SQL Query from the Crystal report X1

Dear All,
I am using crystal report X1. In my application am creating run time MS Access tables and giving table name at run time based on my requirement . From these tables I want to fetch data based on some condition and to display using crystal report X1. I have never used the SQL Queries in the Crystal reports. Please help me out.
Thanks and Regards,
Rahaneef T

Please note;
This forum is dedicated to all other development-related questions which are not directly addressed by other forums. This includes Business Objects SDKs, products, or technologies which do not fall under BusinessObjects Enterprise, BusinessObjects Edge, Crystal Reports Server, or Crystal Reports (for example Desktop Intelligence SDK, Universe Designer SDK, Portal Integration Kits, Java User Function Libraries, and other third party technologies or development languages).
This looks more like a Crystal Reports design issue?
Ludek

AFter joining two tables how to execute the query ???

select Code from PlanCodes where orderNumber =
(select min(orderNumber) from PlanCodes RPC ,PlanRollup RPR
where RPC.Code=RPR.Code
and RPR.AccountNumber = '1234'
and RPR.EffectiveDate = '01/01/2005 '
and RPR.RollupCode = 'x')
AFter joining please let me know how to go about after this ??
ExpressionBuilder builder = new ExpressionBuilder();
Expression creditRating = builder.getTable("PlanCodes").getField("Code");
Expression issue_ref = builder.getTable("PlanRollup").getField("Code");
Expression join = creditRating.equal(issue_ref);

you can set global variable and filter for this variable in the triggers of blocks the actions then you avoid the code of trigger and you can use go_block

Please let me know how to write the Query to fetch data from tables

Hi Folks,
Please let me know how to get the data from different tables using the functionality SQ03,SQ02 and SQ01 .
Helpful answers will points awarded.
Regards,
Ram.

Dear Ram,
Please find the below link which gives in detail with screen shots.
[SAP Query|http://media.techtarget.com/searchSAP/downloads/Teach_yourself_SAP_C20.pdf#search=%22CREATE%20REPORT%20USING%20SQVI%20%2C%20SAP%22]
Thanks
Murtuza

Execute a Query from a report sending it parameters and capture the result

Hello everybody,
Greetings from Peru, I want your help, Do you know how to execute a query from a report sending parameteres and capture the result in a internal table?
The attached imaged has in red square the parameteres I want to send from a report.
The idea is to have a JOB that executes everyday and parameters like DATE PERIOD will change automatically.
Thanks for your time.

Hi Enrique,
You can call a query from a report by using submit statement.
Every query has a corresponding program associated with it.
Execute the query from SQ01. On te selection screen of query, goto SYSTEM from menu and then click on STATUS, you will get program name (In this case aqzzzent_struct=zmm_ent_struc1). Use this program to call the query from your custom program.
Also populate the rspar int table as per the selection criteria you want to pass to query.
   DATA: rspar     TYPE TABLE OF rsparams,
    wa_rspar LIKE LINE OF rspar.
      wa_rspar-selname = 'SP$00001'.
      wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'.
      wa_rspar-option = 'BT'.
      wa_rspar-low = s_cmp_cd-low.
      wa_rspar-high = s_cmp_cd-high.
      APPEND wa_rspar TO rspar.
   SUBMIT aqzzzent_struct=zmm_ent_struc1 WITH SELECTION-TABLE rspar AND RETURN.
Thanks,
Sachin

Query designer execute the query some of key figure showing as * value

Hello All,
I am executing the query from Query designer, executed in web in Mozilla Firefox browser some of key figures values were showing as * value.
same query i run through RSRT its showing value for example: value is 615574389.260
if the value is more then web cannot display the result? how to correct it, Thanks!
Regards,
Ranga
Edited by: Ranga123 on Jan 30, 2012 6:09 PM

Hi Ranga,
Does your Key Figure also have unit? Usually we get * when records with different units are aggregated. As you cannot add 1 EURO to 1$, * is displayed.
Regards,
Nikhil

How to execute a Scenario from Windows CMD prompt

Please can you let me know how to execute the Scenario from a Windows CMD prompt? I am not sure if it is any different from "ODIStartScen" command that ODI uses to execute the scenario.
Appreciate your help.
Regards
B

Hi SH,
I tried running the scenario from the command line, but the process was not completed and it came back with the below message
Session : 131774001 finished with return code : 7000
Do I need to set up any environmental variables or any other setups before I can run the scenario from the command line?
Appreciate your help.
Regards
B

To load the image from appl. server to FORM

Hi all,
i have to fetch the image from Application server and Print in a form. i don't know how to load the image from appl. server to FORM.Through SE78 i guess we can load the image only from presentation server,,,,can anyone help on this????

Hi Bhuvaneshwari ,
Through SE78 you can fetch the image from application server.
Goto>Graphics>BMAP(Bit map images)>In Name parameter click F4 for input help.>click on execute button.
These images are stored on document server.
There you can find images of application server.
Those images you can import.
Reward if helpful.
Regards,
Sandhya.

While executing the query the output is completey different from the query

Dear friends,
We built a query and loaded the data for that infoprovider.
While executing the query the output is completey different from the query what we have built.
Output has no relevance to the query.
Kindly help the same.
Regards,
Sathya

HI Satya,
In my opinion the issue is with your front end.
Results should be identical in RSRT, BEx Analyzer (Workbooks) and the ABAP-Web since all three frontend tools use the "ABAP Runtime layer".
It may differ In the Portal where the new "Java Runtime layer". (Java-Web.) is used.
This is given in OSS Note 1296576 - Different Query Behaviour: ABAP - Java.
So i think the problem lies in your analyser. If you are using Analyzer: BI Add on 7.X (Based on 7.10) try and get support package 8.
Hope this helps.
Thanks,
Rahul

How to improve the query performance or tune query from Explain Plan

Hi
The following is my explain plan for sql query. (The plan is generated by Toad v9.7). How to fix the query?
SELECT STATEMENT ALL_ROWSCost: 4,160 Bytes: 25,296 Cardinality: 204
     8 NESTED LOOPS Cost: 3 Bytes: 54 Cardinality: 1
          5 NESTED LOOPS Cost: 2 Bytes: 23 Cardinality: 1
               2 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 13 Cardinality: 1
                    1 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
               4 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCOUNTS Cost: 1 Bytes: 10 Cardinality: 1
                    3 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCOUNTS_U1 Cost: 1 Cardinality: 1
          7 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTIES Cost: 1 Bytes: 31 Cardinality: 1
               6 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTIES_U1 Cost: 1 Cardinality: 1
     10 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
          9 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
     15 NESTED LOOPS Cost: 2 Bytes: 29 Cardinality: 1
          12 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
               11 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
          14 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 1 Bytes: 17 Cardinality: 1
               13 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Cardinality: 1
     21 FILTER
          16 TABLE ACCESS FULL TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 2 Bytes: 1,127 Cardinality: 49
          20 NESTED LOOPS Cost: 2 Bytes: 21 Cardinality: 1
               18 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
                    17 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
               19 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Bytes: 9 Cardinality: 1
     23 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
          22 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
     45 NESTED LOOPS Cost: 4,160 Bytes: 25,296 Cardinality: 204
          42 NESTED LOOPS Cost: 4,150 Bytes: 23,052 Cardinality: 204
               38 NESTED LOOPS Cost: 4,140 Bytes: 19,992 Cardinality: 204
                    34 NESTED LOOPS Cost: 4,094 Bytes: 75,850 Cardinality: 925
                         30 NESTED LOOPS Cost: 3,909 Bytes: 210,843 Cardinality: 3,699
                              26 PARTITION LIST ALL Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
                                   25 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_HEADERS Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
                                        24 INDEX SKIP SCAN INDEX XLA.XLA_AE_HEADERS_N1 Cost: 264 Cardinality: 1,398,115 Partition #: 29 Partitions accessed #1 - #18
                              29 PARTITION LIST ITERATOR Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
                                   28 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_LINES Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
                                        27 INDEX RANGE SCAN INDEX (UNIQUE) XLA.XLA_AE_LINES_U1 Cost: 1 Cardinality: 1 Partition #: 32
                         33 PARTITION LIST ITERATOR Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
                              32 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_DISTRIBUTION_LINKS Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
                                   31 INDEX RANGE SCAN INDEX XLA.XLA_DISTRIBUTION_LINKS_N3 Cost: 1 Cardinality: 1 Partition #: 35
                    37 PARTITION LIST SINGLE Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 38
                         36 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_EVENTS Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 39 Partitions accessed #2
                              35 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_EVENTS_U1 Cost: 1 Cardinality: 1 Partition #: 40 Partitions accessed #2
               41 PARTITION LIST SINGLE Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 41
                    40 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_TRANSACTION_ENTITIES Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 42 Partitions accessed #2
                         39 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_TRANSACTION_ENTITIES_U1 Cost: 1 Cardinality: 1 Partition #: 43 Partitions accessed #2
          44 TABLE ACCESS BY INDEX ROWID TABLE GL.GL_CODE_COMBINATIONS Cost: 1 Bytes: 11 Cardinality: 1
               43 INDEX UNIQUE SCAN INDEX (UNIQUE) GL.GL_CODE_COMBINATIONS_U1 Cost: 1 Cardinality: 1

damorgan wrote:
Tuning is NOT about reducing the cost of i/o.
i/o is only one of many contributors to cost and only one of many contributors to waits.
Any time you would like to explore this further run this code:
SELECT 1 FROM dual
WHERE regexp_like(' ','^*[ ]*a');but not on a production box because you are going to experience an extreme tuning event with zero i/o.
And when I say "extreme" I mean "EXTREME!"
You've been warned.I think you just need a faster server.
SQL> set autotrace traceonly statistics
SQL> set timing on
SQL> select 1 from dual
2 where
3 regexp_like   (' ','^*[ ]*a');
no rows selected
Elapsed: 00:00:00.00
Statistics
          1 recursive calls
          0 db block gets
          0 consistent gets
          0 physical reads
          0 redo size
        243 bytes sent via SQL*Net to client
        349 bytes received via SQL*Net from client
          1 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          0 rows processedRepeated from an Oracle 10.2.0.x instance:
SQL> SELECT DISTINCT SID FROM V$MYSTAT;
       SID
       310
SQL> ALTER SESSION SET EVENTS '10053 TRACE NAME CONTEXT FOREVER, LEVEL 1';
Session altered.
SQL> select 1 from dual
2 where
3 regexp_like   (' ','^*[ ]*a');The session is hung. Wait a little while and connect to the database using a different session:
COLUMN STAT_NAME FORMAT A35 TRU
SET PAGESIZE 200
SELECT
STAT_NAME,
VALUE
FROM
V$SESS_TIME_MODEL
WHERE
SID=310;
STAT_NAME                                VALUE
DB time                                   9247
DB CPU                                    9247
background elapsed time                      0
background cpu time                          0
sequence load elapsed time                   0
parse time elapsed                        6374
hard parse elapsed time                   5997
sql execute elapsed time                  2939
connection management call elapsed        1660
failed parse elapsed time                    0
failed parse (out of shared memory)          0
hard parse (sharing criteria) elaps          0
hard parse (bind mismatch) elapsed           0
PL/SQL execution elapsed time               95
inbound PL/SQL rpc elapsed time              0
PL/SQL compilation elapsed time              0
Java execution elapsed time                  0
repeated bind elapsed time                  48
RMAN cpu time (backup/restore)               0Seems to be using a bit of time for the hard parse (hard parse elapsed time). Wait a little while, then re-execute the query:
STAT_NAME                                VALUE
DB time                                   9247
DB CPU                                    9247
background elapsed time                      0
background cpu time                          0
sequence load elapsed time                   0
parse time elapsed                        6374
hard parse elapsed time                   5997
sql execute elapsed time                  2939
connection management call elapsed        1660
failed parse elapsed time                    0
failed parse (out of shared memory)          0
hard parse (sharing criteria) elaps          0
hard parse (bind mismatch) elapsed           0
PL/SQL execution elapsed time               95
inbound PL/SQL rpc elapsed time              0
PL/SQL compilation elapsed time              0
Java execution elapsed time                  0
repeated bind elapsed time                  48
RMAN cpu time (backup/restore)               0The session is not reporting additional CPU usage or parse time.
Let's check one of the session's statistics:
SELECT
SS.VALUE
FROM
V$SESSTAT SS,
V$STATNAME SN
WHERE
SN.NAME='consistent gets'
AND SN.STATISTIC#=SS.STATISTIC#
AND SS.SID=310;
     VALUE
       163Not many consistent gets after 20+ minutes.
Let's take a look at the plan:
SQL> SELECT SQL_ID,CHILD_NUMBER FROM V$SQL WHERE SQL_TEXT LIKE 'select 1 from du
al%';
SQL_ID        CHILD_NUMBER
04mpgrzhsv72w            0
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('04mpgrzhsv72w',0,'TYPICAL'))
select 1 from dual where regexp_like   (' ','^*[ ]*a')
NOTE: cannot fetch plan for SQL_ID: 04mpgrzhsv72w, CHILD_NUMBER: 0
      Please verify value of SQL_ID and CHILD_NUMBER;
      It could also be that the plan is no longer in cursor cache (check v$sql_p
lan)No plan...
Let's take a look at the 10053 trace file:
Registered qb: SEL$1 0x19157f38 (PARSER)
signature (): qb_name=SEL$1 nbfros=1 flg=0
    fro(0): flg=4 objn=258 hint_alias="DUAL"@"SEL$1"
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM:   Checking validity of predicate move-around in SEL$1 (#0).
CBQT: Validity checks failed for 7uqx4guu04x3g.
CVM: Considering view merge in query block SEL$1 (#0)
CBQT: Validity checks failed for 7uqx4guu04x3g.
Subquery Unnest
SU: Considering subquery unnesting in query block SEL$1 (#0)
Set-Join Conversion (SJC)
SJC: Considering set-join conversion in SEL$1 (#0).
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM:   Checking validity of predicate move-around in SEL$1 (#0).
PM:     PM bypassed: Outer query contains no views.
FPD: Considering simple filter push in SEL$1 (#0)
FPD:   Current where clause predicates in SEL$1 (#0) :
          REGEXP_LIKE (' ','^*[ ]*a')
kkogcp: try to generate transitive predicate from check constraints for SEL$1 (#0)
predicates with check contraints: REGEXP_LIKE (' ','^*[ ]*a')
after transitive predicate generation: REGEXP_LIKE (' ','^*[ ]*a')
finally: REGEXP_LIKE (' ','^*[ ]*a')
apadrv-start: call(in-use=592, alloc=16344), compile(in-use=37448, alloc=42256)
kkoqbc-start
            : call(in-use=592, alloc=16344), compile(in-use=38336, alloc=42256)
kkoqbc-subheap (create addr=000000001915C238)Looks like the query never had a chance to start executing - it is still parsing after 20 minutes.
I am not sure that this is a good example - the query either executes very fast, or never has a chance to start executing. But, it might still make your point physical I/O is not always the problem when performance problems are experienced.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

How to execute the query from different blocks in Forms

Similar Messages

Maybe you are looking for