How to EXPORT or CONVERT .mov to Flash Movie (.flv)?

Hi all,
Do any fastest way to export or convert a .mov to .flv? I saw some third-party software to do so, which is need to pay a reasonable price. Hope you c'ld give me some of your suggestion before I proceed to the purchase. Need the converter just purposely for website use...
Appreciate!

cheeper version ffmpegX supports .flv too
ffmpegX a DVD, SVCD, VCD, CVD, VOB, DivX, XviD, H.264, PSP, iPod ...

Similar Messages

How can I add a library of flash movies to my site?

I posted this same question on the Dreamweaver forum and a suggestion was made that I try over here for help, so please excuse the duplicate question.
How can I add a library of flash movies to my site?
Hey there everyone and thanks for reading my question.
I have a library of flash movies (specifically a library of maps) and when the map movies are run in Flash they call each other just fine (i.e. the USA map will load the Georgia map when Georgia is clicked on the USA map, etc etc etc for each state).
HOWEVER, when I insert the USA map in one of my site pages (I'm working on the site using Dreamweaver CS4) the USA map page will load, but when a state is clicked the area on the page for the map goes blank and the state map does not load.
Short of coding a specific path in each of my state maps (in the Flash editor) is there a way to tell Dreamweaver there is a library of maps, look there for the sub-map?
and if I do have to code the path to the map, can I code a relative path rather than a specific URL address for the maps?
I know this is probably one of those simple things, but I'm not seeing it (can you tell I'm new at this??)
Thanks in advance for any help!
Frances

Hey again,
Thanks for the helpful suggestions. Everyone's comments got me to thinking about what the path was in the calls from the maps.
here is what finally worked:
on (release)
loadMovie("../FlashIMapDownloads/georgia.swf", 0);
this script code is in the action script for the "georgia" button of my main map - a US Map. (I hope I'm describing all this correctly).
I'll post this same info in the Dreamweaver forum too.
Thanks again!
Frances

IMovie '08: Movie to Flash Video (FLV)?

Hello,
Long story short, I sent some the below directions to a co-worker on how he could export an FLV from iMovie '08... but he told me that he did not have the "Movie to Flash Video (FLV)" option. Do the below directions not apply to all copies of iMovie '08?
1. Go to menu: "Share" and choose "Export Using Quicktime"
2. From the "Export:" drop-down, choose "Movie to Flash Video (FLV)"
3. Click the "Options" button, and use these settings:
-- "Profiles" tab: Choose "Flash 8 - Medium Quality (400kbps)"
-- "Video" tab: Leave as default settings, but change "Max data rate"
to "464", and "Key frame intraval" to "6".
-- "Audio" tab: If your video has audio, choose "Encode audio" and set
the "Data rate:" to "48 kbps (mono)"
-- "Cue Points" tab: Leave at default settings.
-- "Crop and Resize" tab: Choose "Resize video". All videos should be
set at 480px width... So, if your video is 720x480, you would scale it
to 480x320 (4:3 ratio). 1920x1080 would scale down to 480x270 (HD 16:9 ratio.)
- Hide quoted text -
4. Click "Ok"
5. Choose a Save location under the "Where" drop-down.
6. Click "Save".
Your thoughts?
Thanks!
Cheers,
Micky

Exporting QuickTime to Flash Video (.flv) requires a complete install of Adobe Flash software ($$$).
QuickTime 7.4 has ended support for Flash Video inside QuickTime containers and you may run into other issues with the Adobe component because of this.
The free Perian component did allow import of .flv into QuickTime Pro and export to QuickTime formats. That too has ended in version 7.4.
Cheap way would be to upload to YouTube and let them convert and create your .flv file. Then just "borrow" the Flash Video file by opening the direct link and saving using a browser.

How to export height quality gif frm Flash CS3?

Hi,
When i export a .GIF movie from Flash CS3 , the movie quality is not good, here is some dot dots in the gif movie.
How to export height quality gif ? . Kindly explain pls as soon possible...
Thanks & Regards
Mohan

GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame.

How to export a fireworks file to flash while retaining image quality?

I created a banner for our website using fireworks cs3. Part of the banner has aimation (basically a slide show of 6 photos). I've tried to export the files by saving the frams to files, but when I do this, the image quality really gets bad. When I try to change the export settings and change the dither, everything but the last frame looks better and the last frame looks like a yellow color is splattered all over it....I've tried just saving the file as an .swf file but when I do so, the file doesn't work when I insert it into my web page, it doesn't work. Is there a better way to do this? Can I export as something else then import into flash and still retain my image quality? Thanks for any input and help!

How are you inserting the file?
Flash objects need to be placed in an object tag...as described here: http://kb2.adobe.com/cps/415/tn_4150.html

How to export an unsigned apk in Flash Builder?

Hi,
is there a way to export an unsigned apk in Flash Builder 4.6?
If not, is there a way to do it via the commad line, presumably adt?
-c.

Below is the code i have come up with through hours of googling etc but sometimes it wont play a sound any thoughts on this? All of my urls are correct, the method works, its just sometimes i ll click the play button and no sound will play and then i click it again and the sound will play. Should i use ceil instead of floor? Thank you in advance!
import flash.events.*;
import flash.media.*;
import flash.net.URLRequest;
import mx.controls.Label;
private var randSound:Sound;
private var channel:SoundChannel;
private var my_sounds:Array = ["sounds/hisbuttocks.mp3", "sounds/hisfoot.mp3", "sounds/hiship.mp3", "sounds/hisknee", "sounds/hisleg", "sounds/hisshin"];
//random sound function:
private function playRand():void
var randVal:int = Math.floor(Math.random()*my_sounds.length);
var urlname:String = my_sounds[randVal];
var request:URLRequest = new URLRequest(urlname);
randSound = new Sound(request);
channel = randSound.play();

Flash movie inside flash movie

Hello, i am nesting a flash movie inside a main movie. it
loads fine, but clicking actions dont work. for example i cannot
click on a button in that movie. anyone knows what may be
wrong?

Impossible to say without knowing your code - but sounds like
a path problem - if the code in the
loaded movie refers to _root then that may be a reason -
because the root has now changed - but
again, without seeing the code, impossible for anyone to be
specific.
hope this helps.
Chris Georgenes
Adobe Community Expert
www.mudbubble.com
www.keyframer.com
www.howtocheatinflash.com
gvolkov wrote:
> Hello, i am nesting a flash movie inside a main movie.
it loads fine, but clicking actions dont work. for example i cannot
click on a button in that movie. anyone knows what may be wrong?

How do I batch convert 700 sequences to .mov and .mv4 files?

I have 700 separate sequences in FCP. Each one is 20-30 seconds long. I need to rename them and convert them to .mov files and then also .m4v files?
Is there an easy way to batch this or do I have to do them one by one by one by one..........

Try using the *Export Queue* (in FCP click Window > Export Queue).
1. Once the window is open, in the Browser window, highlight the sequences you wish to export.
2. Click and drag them into the *Export Queue* window. You should see a folder called +Batch 1+, with all your sequences.
3. Click on the +Batch 1+ folder and press the Settings... button at the bottom of the window.
4. Set your output destination.
5. To export full res, the format should be *QuickTime Movie*, and the settings should be *Item Settings*.
6. Include *Audio and Video*, or *Video Only*, depending on what you need.
7. Check the *Make Self-Contained* check box.
If your sequences are NTSC DV, to export .m4v you will want to use Compressor 2, so that you can fix the aspect ratio (NTSC is 720x480 while the iPod size is 640x480 or 320x240. This is the difference between square and rectangular pixels.).
1. In the *Compressor Preset* window, find the +iPod Video+ folder, and the +iPod Video+ preset inside the folder.
2. Click the preset and press the *Duplicate Selected Setting* button at the top of the window. A setting called +iPod Video-Copy+ should appear in your Custom folder.
3. Click on your new setting.
4. In the Inspector window, use the 6 buttons to change the settings to what you need.
5. Make sure in the Encoder section, that you choose your size (640 VGA or 320 QVGA) and pick the proper aspect ratio (4:3).
6. Save your settings.
7. Drag the full res files you exported from FCP into the Batch window. *Select All* (Command + A).
8. Right-click in the Setting column and choose your +iPod Video-Copy+. It will apply that setting to all your videos (it may take a while depending on how many you do at once.)
9. Save your batch.
10. Submit!
For renaming, you might try an Automator script. Search the forums or Google, if you need help with that!
Hope this helps!
-Tim

How to export and convert m3u8 to wave

how do I export playlists in wave format, or change the m3u8 format to wave in a saved file ?

You cannot export a whole playlist in WAV. Rather, first convert the files to WAV using this procedure:
iTunes 11 for Windows: Save a copy of a song in a new file format
http://support.apple.com/kb/PH12367
Then put the WAVs in a playlist and export as you normally would.

How to export slideshow and soundtrack as one movie file

This may be a bit naive...I created a keynote presentation, with a soundtrack. When I went to export it, I clicked "include audio," as well as "include soundtrack" (since i wasn't sure if audio also includes the soundtrack.) The result is 2 .mov files, one of which is the soundtrack. However, I need it to be only one file, so that I can upload it to a school video website that expects the file to have both the sound and the images in one file. Don't quite understand what I have done incorrectly. Thanks.

I just discovered this myself.
For some reason TWO files are exported. The manual says something like "If the slide show
contains a sound track, two movie files are created. The file with suffix "soundtrack" contains audio
only and can be deleted".
But the other one does NOT contain any Audio.
WHY, Apple? Are you listening? Lots of people experience HORRENDOUSLY bad results when exporting from Keynote. Sounds are not in sync - or when exporting to QuickTime: missing all together.
What is the point in exporting a separate sound file and leaving the other one WITHOUT sound???
Can someone at Apple please explain the reasoning behind this.
Or even better - tell us how to actually get a working QuickTime export?
Seriously - I didn't leave PowerPoint behind for this kind of non-functioning.
Stop making silly software that doesn't work, and make tools that we can actually use to fill our needs.
Or is it all about phones, these days?

How do I crop edges out of Flash movie

I created a header using flash that involves a piece of
content hanging off the stage. I thought when you did that, the
part that is off the stage does not show. However, when published
to the web, it does show and shifts adjacent content. To see what I
am talking about, please go to www.dumpthepump.net. Any idea how I
can fix it?
www.dumpthepump.net

If the SWF is inserted into the HTML file properly, you
should not see the stuff that lies outside the stage, and the
masking wouldn't really be necessary. So there might have been a
problem with your HTML code which enabled those outside bits to
show up.

Please help, how to import a SWF (catalyst) from Flash Movie ?? Thank you

it seems that lodMovie is not working with a target.
Thank you

Hello Tara,
It's simple, I've developed an animation with Catalyst (took me 2 days...to learn a move forward) and i would like to use that animation inside a flash website. so i'm trying to load the Catalyst swf file animation inside my flash main movie without success !
I"m tryin to do : loadMovie("catalyst_animation.swf", TargetA); TargetA is an empty movie clip located a certain position.
the loadMovie("catalyst_animation.swf", 0); is working but this is not what i want for a clear reason (loading inside and at a certain position).
Thank you for our help.

How to export or capture audio from Flash content?

I've downloaded a Macromedia Flash file via Safari. I'd like to capture a snippet of its audio into a standard audio file format (e.g. AIFF). How do I do this on the Mac, if possible?
I apologize if this is the "wrong" forum for this, but nothing else seemed appropriate.

Hi,
This can probably do what you are after:
http://www.rogueamoeba.com/audiohijack/
Depending on the length of the clip, the demo version may be sufficient for your needs.

How to find encoding info of a Flash video (.flv) file?

Is it possible to find out the encoding information, such as
video and audio data rates, frame rate, codec used, etc, of a Flash
video clip? If so, how? What tool/software I need to do this?
I am able to find these (encoding) info for video clips if
they are in Window Media or Real Media file formats. But I am not
sure, whether there is way to find these info for Flash video clips
as well.
For example, we chose Flash Video format for one of our Web
sites. Someone at work originally encoded a video clip for the site
at nearly 900kbps (total data rate: video + audio). I asked it to
be reduced to around 300kbps. Well, he resized the video and
encoded the same clip at a lower data rate, but doesn't remember
exactly what setting he used. Now, how do I find out the key
information about encoding for this clip (i.e. data rate, fps,
etc)?

welcome to the mac side, im new also
in windows we would right click and select 'properties' right?
on apple you simply hold control 'ctrl' and then click on the folder you want, the control and click is macs equivanlent to windows' right click
after you've 'ctrl' and clicked, select 'get info', get used to this 'get info' function as you'll probably use it alot, like i said, its like selecting 'properties' on windows
another way of doing the control>click is clicking once on an item so that it is highlighted and then selecting 'file' at the top of your screen and then 'get info' too
to view all pics in a slideshow yo simply highlight each one, or you can select multiple items by holding down the command key (⌘) then single clicking each pic you want to view, this selects it and then double clicking any one of them when they are all highlighted, in mac you will use the 'preivew' application which is an image viewer, sort of the replacement for your old 'windows fax and image viewer' on windows
hope that helps

Urgent: How to export a Director cast member - in this case it's a flash movie?

Hi there,
I've got a problem - of course, that's why I'm here.
My problem is that in my Director (version 11.5) movie a flash movie is member of the cast list (sorry, I only know the German terms and hope totranslate correctly!). In it's properties there's no source-URL. So it must be "in" the Director film somehow.
Unfortunately the original file went lost. Now I need to have this flash movie as a flash movie, not as a member/ cast. Is there any possibility to get the movie out of Director als a file?
Thanks so much for your help!
Kind regards
Jana

Hi Sean,
thanks for that hint! I downloaded and extracted the Xtra into the Director Xtra folder. Then I tried to use the function "exportSWF", but it told me the handler is undefined.
Unfortunately I'm a real Lingo beginner and don't know anything about Xtra usage.
I used the following code:
m = member("Player")
exportSWF( m, "/output.swf", TRUE )
I'm sure that line 1 gives me the flash movie as a member, because it is used like that in the code already.
I thought with the Xtra I can simply use the exportSWF-funcion. What else is to do to use it??
Thanks in advance!
Jana

How to EXPORT or CONVERT .mov to Flash Movie (.flv)?

Similar Messages

Maybe you are looking for