How to extend an existing online number ?

Hi,
I would like to extend an existing 12 month subscription with another one. I found in FAQ that I should have a button "Extend" next to my online number when I am connected to my Skype account but I dont. Could you please tell me how to do to extend my existing subscription ?
Thanks.
Solved!
Go to Solution.

So you actually work for this company with the WORST business website I have ever seen. I've spent 45 minutes on your stupid site trying to figure out how to extend my online number because your email told me I had to extend my number or it would expire.
Here your saying that it will automatically extend. What if I don't want to automatically extend? What if I wanted to cancel? What if I actually wanted support on this horrible service. I mean the phone actually works but your site is absolutely the WORST. You can't do anything you want to do logically.
I'm a web designer. If I designed junk like your site, I'd be fired and deservedly so.
45 minutes looking for something that doesn't exist. Thanks you can extend my number FOR FREE NOW for wasting my time.
Oh and thx for allowing us to actually communicate with you in such an "effective" manner. "What kind of support does this PROFESSIONAL site give?" Message boards!
You guys are the worst. Congrats!

Similar Messages

How much costs an Skype online number ??

There is no information about the costs of the online number !!
I followed all the buy-a-number-process until Skype/Microsoft asks me about my account without to give me opportunity to see how much the online-number costs !!!!!
Please tell/write us how much
I wont to buy but never blind

So you actually work for this company with the WORST business website I have ever seen. I've spent 45 minutes on your stupid site trying to figure out how to extend my online number because your email told me I had to extend my number or it would expire.
Here your saying that it will automatically extend. What if I don't want to automatically extend? What if I wanted to cancel? What if I actually wanted support on this horrible service. I mean the phone actually works but your site is absolutely the WORST. You can't do anything you want to do logically.
I'm a web designer. If I designed junk like your site, I'd be fired and deservedly so.
45 minutes looking for something that doesn't exist. Thanks you can extend my number FOR FREE NOW for wasting my time.
Oh and thx for allowing us to actually communicate with you in such an "effective" manner. "What kind of support does this PROFESSIONAL site give?" Message boards!
You guys are the worst. Congrats!

How to extend an existing IDOC!

tell me the steps to extend the existing IDOC !
                                                               Thanks

1>we31(create new segments with fields u want to populate)
2>we30(create an extension idoc type).in we30 u will get to radio buttons.1>basic type 2>extension.click on the extension and then copy the basic type.Now will get all the segmnts .Now add the new segments under the parent segement which needs to be extended.
3>attach the extended idoc type to basic type and message type to tcode WE82.
4>Now u have to search for an exit where u have to write ur code in order to populate the fields which u have extended.Basically u will write in the Function module.Make sure u r writing in the correct exit.Evry messagetype will have a function module.
5>create a project in cmod and activate the function exit.
IDOC EXTENSIONS
Letâs first look at the concept of IDOC extension. SAP delivers Basic IDOC types such as DEBMAS02, MATMAS02, ORDERS02, and WMMBID01. By extending the Basic IDOC type, you are actually creating a new IDOC type. You create a new segment with the additional fields. This new segment has to be associated with one of the existing Basic IDOC segments. Then you create a new extension type, which is associated with the Basic IDOC type. This results in a new IDOC type. In order for ALE function modules to relate to this new IDOC type, the IDOC type is linked to the corresponding message type. Note that you should not add fields to existing segments but should create a new segment and associate it with an existing segment. This, in a nutshell, is the process of creating IDOC extensions.
In our example, the Basic IDOC type DEBMAS02 is used to communicate Customer Master data to the SAP Customer Master application. Even though the application has a screen to enter and store a contact personâs business address (see Figure 1), DEBMAS02 does not have a segment or fields that communicate the contact personâs business address. If your business requires that this business address be communicated to the other system through the ALE interface for Customer Master, then you have to extend the DEBMAS02 IDOC type, and enhance the corresponding ALE function module.
In DEBMAS02 the contact person fields are present in segment E1KNVKM and the business address of the contact person is stored on the SADR SAP table. You need to create a new segment, Z1SADRX, that is associated with E1KNVKM. This will be done in the process of creating an extension type ZDEBMASX. This extension type will then be associated with a new IDOC type, ZDEBMASZ. IDOC type ZDEBMASZ will be linked to message type DEBMAS for Customer Master. The final step in the IDOC extension process is to check the new objects. This check also verifies the structural integrity of the IDOC type. Letâs look at each of these steps in more detail.
1. Create an Extension Type and a New Segment.
First, letâs determine the fields on table SADR that you are going to provide for in the new segment Z1SADRX. You need fields for name, street, city, region, and country to give the business address of the contact person. You also need fields for the address number. ADRNR is a field in SAP tables such as SADR that uniquely identifies the address of an entity. This field is cross-referenced from other tables to the SADR table to obtain the full description of the address. Because this is an IDOC type for master data, the first field of the new segment will be MSGFN. The message function field informs the receiving system of the action to be taken for that particular segment. In the code that you write for populating the new segment, the value of the message function is the same as that of the parent segment E1KNVKM. In all, you will have 12 fields in segment Z1SADRX (see Table 1).
To create an extension type and new segment:
     Use transaction WE30 or from WEDI go to Development -> IDOC types.
     Enter ZDEBMASX for Object Name.
     Choose Extension Type.
     Click on Create.
     You will see a pop-up screen. Choose Create New, and enter a description. For version 4.x, enter DEBMAS02 in the Linked Basic Type field. Enter.
     You will see a screen with ZDEBMASX and its description in the first line. Click on this line, and press Create. For version 4.x, expand the tree of segments, and place the cursor on E1KNVKM.
     You will see a pop-up screen. Enter E1KNVKM as the reference segment. Enter.
     For 4.x, press Create after placing the cursor on segment E1KNVKM.
     You will see a line appear with E1KNVKM hierarchically below ZDEBMASX, with a description "Customer Master contact person (KNVK)."
     Click on this line and press Create. You will receive a message indicating that the new segment being created will be a child segment of E1KNVKM. Enter. A pop-up box appears for the new segment.
     Enter Z1SADRX as the segment type, 1 for Minimum, 1 for Maximum. Leave Mandatory segment unchecked. These entries imply that there is only one Z1SADRX segment for every occurrence of the E1KNVKM segment, and also that this segment is not mandatory. Note that if the parent segment is not mandatory, then the child segment should not be mandatory, because this could result in a syntax error during the creation or processing of the IDOC.
     For 4.x, you must first create the IDOC segment Z1SADRX (Iâll explain why in a moment) from the menu path WEDI -> IDOC -> Development -> IDOC Segment.
     Click on Segment Editor.
     On the next screen, click on Create.
     Enter a development class for the object. Enter.
     This will take you to the screen for segment definition. Enter a description for the segment. Enter the field name, data element, and the data element documentation name. In most cases, all three fields may have the same values. If you are using a field in the segment that is not present in the ABAP/4 data dictionary, you must first create the domain, data element, field, and appropriate documentation before using it in the new segment.
     Enter these three columns for all 12 fields. Save.
     Click on Generate/Activate, F3 to step back.
     From screen Maintain Segment, go to Segment Type -> Release. A checkbox now appears beside the segment definition Z1SADRX (see Figure 2). Check this box. Save.
     Save again to store the descriptions of the segment, F3 to step back.
     Save the extension type.
It is possible to have several new segments with relevant Basic IDOC type parent segments in a single extension type. However, you can form only one IDOC type based on a single extension type.
2. Create an IDOC Type.
The next step is to create an IDOC type by associating the extension type that you created with the Basic IDOC type. This is a simple process:
     From transaction WE30 or WEDI go to Development -> IDOC Types.
     Enter ZDEBMASZ for Object Name.
     Click on IDOC Type.
     Click on Create.
     Enter DEBMAS02 for Basic IDOC type.
     Enter ZDEBMASX for extension type.
     Enter a description.
     Enter.
     You will see a display of the composite IDOC type with all segments, including Z1SADRX (see Figure 3).
It is possible to associate only one extension type with a Basic IDOC type for a given IDOC type. However, you can have multiple new segments in an extension type.
3. Link IDOC Type to Message Type.
The next step is to link the new IDOC type to its corresponding message type. This is important, because this relationship is referenced in the partner profile parameters where you specify the message type and IDOC type to be used for that particular representative system. To link the message type:
     Use transaction WE82, or from WE30, go to Environment -> IDOC Type / Message Type, or from WEDI go to Development -> IDOC Type -> Environment Î IDOC Type / Message Type.
     Click on Display <-> Change.
     Click on New Entries.
     Enter DEBMAS for message type.
     Enter DEBMAS02 for Basic IDOC type.
     Enter ZDEBMASX for extension type.
     Enter your SAP R/3 release number for Release.
     Save.
This data is stored on the EDIMSG table and is accessed by several ALE processes to relate the message type to the IDOC type.
4. Check the IDOC Type.
Before checking the IDOC type for consistency, it is important to perform another step that releases the extension type to the IDOC type:
     From WEDI go to Development -> IDOC Types -> Extras -> Release Type, or from transaction WE30 go to Extras -> Release Type.
     For the Object Name ZDEBMASX and radio button Extension Type, click Yes.
     The extension type has now been "released."
You canât edit the extension type once itâs released. To cancel the release for further editing or deactivation, go to WE30 Î Extras Î Cancel release. The final step in the IDOC extension process is checking the validity of the IDOC type:
     From transaction WE30 or WEDI go to Development -> IDOC types.
     Enter ZDEBMASX for Object name.
     Click on Extension Type.
     From the Development Object menu select Check.
     Repeat the operation for IDOC type ZDEBMASZ.
     A check log will be generated for each run with details of correctness or errors (see Figure 4).
In some situations it is possible to receive errors during the check process, especially segment length errors. The incorrect IDOC segment can be repaired and corrected by executing program RSEREPSG. This program checks the formal consistency and repairs incorrect segments. In test mode it will generate a log of formal correctness for the specified segment only. For the program to repair segments in normal mode, the underlying IDOC structures (DDIC structures) must be active. This program rectifies the lengths of the DDIC structures and not the fields themselves. RSEREPSG can also be used to change the person responsible for the object and the release flag.
Menu paths may vary slightly depending on the release/version of SAP R/3, but the procedures and the principles are the same.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application. It may be necessary to enhance an ALE function module even in situations where an IDOC extension has not been performed if the IDOC data being passed to and from the application requires modifications. The following approach applies to both situations.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
     For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
     From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
     Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
     Execute transaction CMOD.
     Enter name of project, say CSTMAST1.
     Click on Create.
     Enter a description of the project.
     Save.
     Click on SAP Enhancements.
     Enter VSV00001 for Enhancement.
     Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1.     The point in the ALE function module where the function exit occurs
2.     The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
     From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
     Find Customer Function 001.
     Double-click on 001.
     The function EXIT_SAPLVV01_001 will be displayed.
     Double-click on INCLUDE ZXVSVU01.
     You will be asked to create a new include object. Proceed as desired.
     Enter code (as in Listing 1).
     Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
     Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
     Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
Error handling is a very important consideration when making enhancements to inbound ALE/EDI objects. In ALE and EDI inbound processing, workflow is used for handling errors at different levels such as technical and application. If workflow has been configured for the interface, the error messages and workflow items flow to the inbox of the named recipient(s).
It is also critical to enhance the workflow that handles notifications of the inbound ALE/EDI process. In most scenarios this is not a very difficult task because SAP lets you influence the workflow parameters and messages in function exits (customer functions). You typically do this using flags and message codes to trigger certain workflow actions. If you conform to the status codes and flags stipulated for workflow processing, the enhancement could be error-free and seamless. In the case of an inbound IDOC with an extension, you should populate the EDIDC fields IDOCTYP (new IDOC type) and CIMTYP (extension type) accordingly.
IDOC REDUCTIONS
When distributing or communicating master data to other systems, the volumes of data transmitted over communication lines may be large, resulting in performance problems and/or excessive usage of resources such as disk space and bandwidth. Careful scrutiny of the master data Basic IDOC type may reveal that many of the segments are redundant or are simply not being used. If this is true, then the basic IDOC type is a candidate for a technique known as IDOC reduction. The R/3 System provides the ability to eliminate unused segments and irrelevant segment fields from the Basic IDOC type. This procedure is relatively simple and easy to implement. IDOC reduction is available for only a few message types such as DEBMAS, CREMAS, GLMAST, MATMAS, and certain POS messages.
When performing an IDOC reduction, a new message type is created based on an existing message type. The IDOC segments associated with that message type are proposed for editing. Mandatory segments of the IDOC type canât be excluded. By default optional segments are excluded, but you can choose to include an optional segment and only certain fields in the optional segment. If you have extended the Basic IDOC type and created a new IDOC type associated with a corresponding message type and you are creating a new message type (view) based on it for purposes of IDOC reduction, then the enhanced IDOC type is presented for editing along with the additional segments.
Letâs use the Vendor Master IDOC type CREMAS01 as an example to demonstrate IDOC reduction. Message type CREMAS is used for communicating Vendor Master data to other R/3 or external systems. If you browse the IDOC type CREMAS01 youâll see that it has 10 segments, with E1LFA1M being a mandatory segment (see Figure 6). To reduce this IDOC type:
     Use transaction BD53 or from SALE go to Distribution scenarios -> Master data distribution -> Reduce IDOC type for master data.
     Enter ZCREMS for View (message type).
     Click on Create.
     You will see a pop-up box. Enter CREMAS in the Derived From field. Enter.
     Enter a description. Enter.
     You will see a list display with segment E1LFA1M in green and a * symbol. The symbols used in IDOC reduction are: * for mandatory, 1 for selected, - for deselected, x for core selected, and the Î.â for core not selected. The corresponding elements are highlighted in green, white, red, violet, and gray, respectively.
     Expand all trees. You will see nine other segments in red.
     Place your cursor on the E1LFB1M segment for company code data and click on Select. It turns white with a 1 symbol.
     Double-clicking on it will display a list of fields. You can select fields that you require (see Figure 7).
     Note that if a child segment is selected, its parent is also selected automatically in order to maintain the hierarchical integrity.
     After youâve selected the segments required and its fields, save.
     From the main screen, click on Activate.
Activating the new message type ZCREMS will turn on the message type change pointer generation on a particular client. While creating a reduced IDOC type message is a client-independent activity, activation is client-dependent. An entry is created in table TBDA2 for a specific message type in a specific client and is activated. To delete this message type, you need to deactivate it from all clients on that instance. These message types are transportable.
Now that weâve created a new message type for a reduced IDOC type, letâs build the rest of the ALE configuration to work the interface with the following steps:
     Define a logical system to represent the other R/3 or external system.
     Configure the Customer Distribution Model to send message ZCREMS to this logical system.
     Define a port, if needed, for this system.
     Define a partner profile based on the logical system and maintain its outbound parameters. Make sure to use ZCREMS as the message type and CREMAS01 as the IDOC type.
     Use transaction BD14 or execute program RBDSECRE or from BALE go to Master Data -> Vendors -> Send. Then, to specify a vendor or range of vendors and enter message type, go to ZCREMS and its target logical system.
     Execute.
You can also capture changes to Vendor Master data and create IDOCs by executing transaction BD21 or program RBDMIDOC. Use transaction WE02 or WE05 to view the IDOCs created as a result of the preceding test. Notice the segments populated and the basic segments that are absent due to the reduction. You will find that the fields deselected from the segments have a value of /. This is equivalent to a null value. Eliminating segments may result in saving resources, while eliminating fields may not, unless the data is compressed. Also, if you look at the master data ALE function modules for these few message types, youâll see that a function module IDOC_REDUCTION_FIELD_REDUCE is called for every segment being populated. This in itself may be an overhead. It is important to weigh the pros and cons before implementing IDOC reduction. Of course, in certain cases, it may be a necessity for adjustment of data.
Enhancing ALE/EDI and IDOC extensions and conducting IDOC reductions is fairly simple. However, before proceeding with these tasks, you must carefully research the many options available in ALE and develop the best design for your business scenario.
IMPLEMENTING BAPI WITH ALE: A SAMPLE SCENARIO
Business application programming interfaces (BAPIs) provide an interface to Business Objects in the R/3 System. Business Objects are based on object-oriented technologies and represent an application objects, such as an address or a sales order. This next section prototypes an ALE interface that incorporates BAPI methods. When weâve finished, you should have a good idea of how easy it is to incorporate BAPIs with ALE and of how beneficial leveraging the 1000+ BAPIs available in the R/3 System can be when you want to interface with R/3 application objects.
Letâs start with a brief overview of SAP Business Objects and BAPIs.
SAP Business Objects. An SAP Business Object envelopes R/3 data and business processes while making the details of data structure and access methods transparent to a user interfacing with it. It consists of four layers: kernel, integrity layer, interface layer, and access layer. The kernel represents the R/3 data and its attributes. The integrity layer represents the business logic of the object and contains the business rules that govern the values of the kernel. The interface layer describes the interface mechanisms to external applications. BAPIs belong to the interface layer. The access layer represents communication methods, such as COM/DCOM, RFC, and CORBA.
SAP Business Objects and their details are stored in the Business Object Repository in the R/3 System.
BAPIs. BAPIs are "methods" of SAP Business Objects and represent their interface layer. BAPIs are essentially function modules in the R/3 System that are capable of invoking remote function calls (RFCs) for the purpose of communicating data through the function moduleâs import/export parameters and internal tables. BAPIs do not invoke screen dialogs. Like blackbox technology, BAPIs do not require the programmer or user to know the coding and implementation details of the interface to the Business Object. The user simply invokes the BAPI with its appropriate parameters and values in order to accomplish a task such as getting a list of materials from an external system or sending a list of contact person details to another system.
BAPIs can be executed synchronously or asynchronously while using the ALE communication layer for exchanging data. Typically, with asynchronous BAPI communications, an ALE IDOC is used to distribute the data. As we will learn in the following prototype, the ALE distribution model has to be configured in order to use the appropriate BAPI methods for the RFC destination that provides a gateway to the external system (R/3 or other). For this type of communication, an ALE IDOC interface must exist. If a particular BAPI (SAP-delivered or user-written) does not have an ALE IDOC interface, the interface can be generated using certain R/3 tools and procedures.
BAPIs are fast becoming the communication standard for exchanging data between business systems (including R/3). SAP Business Objects conform to Open Application Group (OAG) standards, and BAPIs support the COM/DCOM and CORBA guidelines. ALE and BAPIs is the strategic direction for all SAP interface technologies and will replace SAPâs traditional techniques in the future.
A BAPI/ALE PROTOTYPE ÷ CONTACT PERSON DETAILS
In the previous section, we learned how to enhance ALE functionality using the example of Customer Contact Person details. We extended the IDOC and enhanced a customer function with a few lines of ABAP code to achieve the additional functionality of distributing contact person details. While this was an exercise to learn IDOC extensions and customer-function enhancements, we can prototype a BAPI/ALE interface in this section that accomplishes the same purpose ÷ the distribution of contact person details. In release 4.5 of the R/3 System, message type ADR3MAS and IDOC type ADR3MAS01 have been provided to distribute contact person details with the aid of a BAPI method. The steps weâll walk through in a moment will illustrate the ease with which we can integrate BAPIs with ALE to get an interface up and running for many standard business scenarios or specialized cases that were not supported by ALE prior to the advent of BAPIs.
The ADR3MAS is considered to be a master data message type because it complements business master data, such as customer and vendor master. It is now supported by change document functionality, implying that change pointer mechanisms can be used to capture and then distribute changes occurring to contact person data using ALE IDOCs. The function module that accesses the R/3 data is a BAPI. In the R/3 System, contact person address is a business object. If we search the Business Object Repository (via transaction SWO1) with the keyword "address," for example, we will find business object BUS4003 under Cross-Application Components -> General Application Functions -> Address Management -> BUS4003: Address of a person in a company. This is the business object that pertains to our scenario, and a drill down on it reveals the details of the object, including its methods (see Figure 8). The method that would be of interest to us is "AddressContPart.SaveReplica." For your information, the corresponding BAPI function module is BAPI_ADDRCONTPART_ SAVEREPLICA in the function group SZAM.
Having gathered this information, Letâs build the outbound interface:
     Create a logical system (via transaction SALE) to represent the receiver system.
     Configure the distribution model. From transaction SALE, use option Maintain Distribution Model to create a model view for this scenario. Specify the sender system (the base logical system for the client you are working in, such as the logical system that has been assigned to that client) and the receiver system (the logical system). After positioning the cursor on the receiver system, click on Method and enter AddressContPart in the Object Name field on the panel that pops up. Also enter SaveReplica in the Method field on the pop-up panel. Enter and save the Distribution Model (see Figure 9).
     From transaction WE20, create a partner profile based on the logical system for the interface. Use message type ADR3MAS and IDOC type ADR3MAS01, with an appropriate port.
     Activate the change pointer for message type ADR3MAS. From SALE go to Set up Data Distribution -> Master Data Distribution -> Activate Change Pointers. Ensure that change pointer generation is active at the general level as well.
Now that weâve completed the configuration, letâs test the interface. The purpose of this test is only to create outbound IDOCs. Appropriate settings, such as port definitions and RFC destinations, can be made as required for purposes of communicating the IDOCs to the external system (or other R/3 system).
From the Customer Master or Vendor Master screens, create or make changes to contact person address. This should result in the creation of change pointers. (Check table BDCPS for change pointer entries with message type ADR3MAS.) After this, from transaction BALE go to Periodic Processing -> Process Change Pointers, enter ADR3MAS as the message type, and execute the transaction. This should result in a message indicating the number of master IDOCs created. Use transaction WE05 to display the IDOCs.
THE ALE AUDIT
In this section letâs take a look at the prototyping of the ALE Audit. ALE Audit is a powerful mechanism for verifying the success of ALE transactions/messages sent to another system. As you will see, implementing ALE Audit is not only easy but also very beneficial, because it facilitates the monitoring and tracking of transactions across systems while providing an entry point into error handling.
Program RBDSTATE is used for audit confirmation of ALE transactions between two R/3 systems; in other words, it indicates the success or failure of the ALE transaction on the target system. The program reports the status of the transaction on the target system back to the sending system. This process also serves as an interface itself from the target system to the sender system, facilitated by message type ALEAUD. In the following section, weâll look at the various steps needed to set up ALEAUD and execute program RBDSTATE.
SETTING UP ALEAUD and EXECUTING PROGRAM RDBSTATE
Letâs consider two different R/3 systems with base logical systems BK1CLNT010 (sender system) and BK2CLNT020 (target system). Assume that you are distributing characteristics master (message type CHRMAS) from BK1CLNT010 to BK2CLNT020. When you send CHRMAS02 IDOCs from BK1CLNT010, their status is 03 (data passed to port OK) if they were successfully externalized from the sender system. If the IDOCs were received and processed successfully on the target system, the status of those IDOCs on the target system is 53 (application data posted). Remember that you have to create a partner profile for BK1CLNT010 on the target system in order to receive the CHRMAS messages. The inbound parameters of BK1CLNT010 partner on the target system have CHRMAS as the message type and CHRM as the process code.
You now need to configure BK2CLNT020 to send ALEAUD messages to BK1CLNT010, the sender system. And you also need to configure BK1CLNT010 to receive those messages in order to update the status of CHRMAS IDOCs sent to the target system:
     On the target system BK2CLNT020, configure the distribution of message flow of type ALEAUD to logical system BK1CLNT010.
     Create filter object using object type MESTYP with a value of the message type for which you need audit confirmation. This message type must flow from the sender, BK1CLNT010 to BK2CLNT020. In this example, the value of the filter object type MESTYP is CHRMAS, message type for characteristics master. Save the distribution model. Use transaction BD64 to do this.
     On target system BK2CLNT020, create an RFC destination with name BK1CLNT010. Choose the relevant connection type and enter the logon parameters and password for the R/3 system on which BK1CLNT010 resides. Use transaction SM59 to do this.
     On target system BK2CLNT020, generate partner profile and port definition using transaction SALE, go to Communications -> Generate partner profile. Specify the customer model as described. Check the partner profile to ensure outbound parameter entries for message types ALEAUD and SYNCH.
     On sender system BK1CLNT010, create a logical system for BK2CLNT020. Create a partner profile for logical system BK2CLNT020 with inbound parameters for message type ALEAUD, with process code AUD1.
     Distribution of customer model on BK2CLNT020 to BK1CLNT010 is not necessary.
TESTING THE ALE CONFIRMATION PROCESS
Now you are ready to test the ALE audit confirmation process:
     From the sender system, BK1CLNT010, send a couple of CHRMAS02 (characteristics master) IDOCs down to the target system, BK2CLNT020. Make sure that the status of the IDOCs is 03 (data passed to port).
     Check the target system for receipt of these IDOCs. Make sure that they are in a status of 53 (application data posted).
     Execute program RBDSTATE with appropriate parameters. Specify BK1CLNT010 for Confirm to System, CHRMAS for Message type, and date, if necessary.
     Upon successful execution, informational messages will be issued indicating the IDOC number and status of the ALEAUD IDOC. (Note that a single ALEAUD audit IDOC can contain audit messages for multiple application IDOCs. This capability reduces the traffic of IDOCs between the two systems and keeps the overhead of audit confirmations at a minimum.)
     Check the sender system for the receipt of the ALEAUD message. The status of the CHRMAS IDOCs that you sent to the target system must be changed to 41 (application document created in target system).
This completes the test of ALE audit confirmations (see Figure 10 and Figure 11 for IDOC display of target and sender system).
Audit confirmations can play a significant role in the reporting and monitoring of production systems. You can schedule program RBDSTATE periodically on target systems to report back to sender systems. Keep in mind that you need to maintain a sufficient time lag between the sending of application IDOCs to the target system and the execution of this audit program because the application documents need to be posted on the target system. This program can also be accessed from BALE using Periodic work -> Audit confirmation.

How can I move an online number from one Skype acc...

I managed to get an online number but bought it for the wrong Skype account - is there any way I can get it transferred across to a different Skype account?

It's not possible to transfer products from one account to another. But you can request a refund and purchase a new number for the correct account.
https://support.skype.com/en-gb/faq/FA297/How-do-I-request-a-refund

How to change subscription of Online Number

Hello,
I purchased an online number and the subscription was for 3 months which is charging me 18$ per three months, now I would like to acquire that number for an year and need to pay the whole amout at once to get discount as well but I am not seeing how to change my subscription without releasing my number
Can someone please help.

Veneer87 wrote:
(Problem is, If i cancel the current subscription and buy a new yearly one, India is not included in the new subscription)
Hello
From your account it appears that most of your calls are to India. In that case it may be better to stay with your current Subscription as to change it you wound lose being able to call India and have to fund those calls with Skype Credit.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

How I can turn my Online Number to a toll free to ...

Hello
We have purchased online number.
How I can turn it to toll free for my customers.
Thanks
Yuli

Yuli wrote:
Hello
We have purchased online number.
How I can turn it to toll free for my customers.
Thanks
Yuli
Skype does not provide toll-free numbers. You would have to contact a provider of those services in your country, seeing if you can purchase a toll-free number that could forward calls to your Skype Online Number. In many countries, this would be possible, but done separate from Skype.
Good luck!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

How to validate the existing Serial number while doing the GR.

Dear,
When we are doing the GR, If we given existing Serial number is in input System is accepting and update in the existing serial number (Equipment).
It is throwing error when equipment is in ESTO status and Stock information is available in the equipment but When equipment is in AVLB status without stock information in equipment it is updating in the same Equipment / Serial number and status is changed to ESTO.
However my Requirement is system should not allow or throw error when we are give input existing serial number while doing GR, How to do this.
Regards
Kishore

while INSTALL is running?
I guess there is no way to do this...

How does one access the online number settings..Fo...

i have an online number and world account subscription, i am using a Mac(updated skype) but cannot find how to access that part of the account to change the forwarding feature.

Go to your account and you will see the call forward button, clicl on the button, and a window will come up to set your number you want to forward to,
If you found a post useful, please give Kudos. If it helped to fix your issue, mark it as a solution to help others.
Thank You!

How can I cancel an online number reservation?

Hi,
I can't seem to find an option to cancel a reserved online number in my account. I was just checking my options but no intention to purchase at the moment. How can I remove that reserved number showing up in my account? Please help. Thank you.

If you have not paid for the number the request will take about a week to die on its own,
If you found a post useful, please give Kudos. If it helped to fix your issue, mark it as a solution to help others.
Thank You!

How to extend an existing network with airport

How Do you extend a wireless network using two airports?

Please check out the following Apple Support article for details on how to extend a wireless network with multiple AirPort base stations.

Need help choosing how to extend my existing home network to my detached garage?

I have done as much research as possible on this scenario but cannot seem to match the ideal solution with my wants. Perhaps I simply just do not understand networking as well as I thought I did. Either way, any helpful information or suggestions are greatly appreciated.
Objective: Extend my wireless network to my detached garage.
My current ISP provider is Time Warner Cable. I have RoadRunner Extreme, which in my area gives consistent speeds of 50 Mbps download and 5 Mbps upload when I am connected via ethernet cable. When I upgraded to the "Extreme" package i found out I was forced to use their Motorola SB6580 ... its a DOCSIS 3.0 cable modem + wireless router. I was able to access the Motorola's setup options on the internet and I disabled the wireless function. This has allowed me to use my Time Capsule as the primary router to provide wireless access on my home network. I have not had any issues with this setup and is my preferred way to operate.
I have recently moved my home office to the 2nd story of my detached garage and need to extend my wireless network to meet the demands of all my gear. I have decided to achieve this goal by going with one of the following 3 options:
1.) enable the wireless function on the motorola modem making it the primary router. move my time capsule out to the office and use it in bridge mode. However I do not think I understand bridge mode correctly. I thought the secondary router (in this case my TC) in bridge mode needed to be connected w/ an ethernet cable at all times to enable this feature? If I understand similar networking discussions I will lose the ethernet ports with this option? If this isnt called Bridge mode once i take away the ethernet cable what is it "technically" called?
2.) buy a 2nd airport extreme base station and create the same type of wireless network extension setup. The difference here is I would leave my motorola's wireless features disabled, use 2 apple products that speak apples to apples wirelessly and relieve myself of all the headaches involved with a neopolitan setup. This seems like the obvious choice b/c Apple products are much more user friendly, but I dont want to spend the $200 on a new router if I can achieve a comparable setup by just enabling the equipment I already have.
3.) use either of these 2 scenarios above & go buy a 150' ethernet cable to join them together. if this is the case wouldnt a $50 hub suffice on the end of the cable? I dont necessarily need to have wireless, just reliable connectivity. I can access the existing wireless network now, but download speeds are not great and things really start to slow down when i have multiple clients connected. I would rather not have to drill through exterior walls, bury conduit and install learn how to install data wall plates, but i will if this is the pros far out way the cons.
Current modem/router placement: if standing @ the front door of my 1 story house facing out towards the street my motorola modem/router is in the front right-hand corner of the house.
Distance location of the detached garage office setup: if standing @ my front door my my work area is in the far back left corner of my property. it is approx 175' from the router and on the 2nd story of the garage. I said 150' cable earlier b/c i could relocate the router to a bedroom on the opposite end of the house, however this would eleminate the current wired status of the items connected to it and I would prefer to keep them wired in.
clients connected in the house: (4) apple tv's; Roku; Xbox; Wii; Playstation 3; (2) Lenovo laptops; iPad; (2) Blackberry's; (2) iPhones; iPod touch; (2) wireless netowrk printers; (2) smart tv's ... a handful of these are currently wired into the time capsule now which provides an uninterupted viwing experience for the MLB package. This of course trumps all opportunity costs involved with moving the router. There is nothing more frustrating than a screen buffering in the botton of the 9th inning after you've sat there for 3 hours.
clients connected in the office: (2) 27" imacs; apple tv; iPad; network printer; Wii; Harmony Link universal remote; Mac Book Pro ...
I have approx 5TB of digital media that is shared over the network via shared iTunes libraries that I would like to access as well. iCloud helps with all of our household gadgets as far as acessibility but with all the backups going on simutaneously it also creates headaches when you need the throughput. I need to do a better job of managing those settings. nonetheless, I would like some guidance on the best way to extend my current netowrk, suggestions for better scenarios i did not mention and thus am probably not aware of and any networking 101 schooling if it doesnt sound like i understand the way bridge mode/network extension works. sorry for the long post and thank you for your time & help.

Ethernet beats all other solutions hands down..
A single ethernet connection from wherever is the closest point in the house to the garage office... wins. You can plug a router working as AP and switch or pure switch on to it. Get a cabler in to do the job.. and they can probably figure it out and do the whole job whilst you scatch your head.. yes you will pay for it.. but a cabler knows how to do it. And most likely leave the inside network exactly as it is. Since office is important to be reliable.. there is one and one only reliable method.. ethernet.
If the garage and house are on one electrical circuit.. which is doubtful if it is a separate building then EOP adapters can often work well.. They do not handle earth leakage protection, breakers (rather than fuses) or meters at all well.. but if they are simply all connected to power.. behind the same meter and using old fashioned fuse box.. EOP rated at 200mbps or some now are 500mbps can work reasonably well. Speed about the same as wireless at its best but if it works when installed will generally not change with the weather, moon, and wind direction which wireless is liable to do.
Wireless bridging.. hmm avoid if possible. For reliable connection no.. apple products can do wireless repeater but as you mentioned that turns off the ethernet ports except for the Express.. that is the only unit you can use as a bridge and plug a switch into it. Why Apple why??
So if you want to bridge two points by wireless buy specialised wireless bridge.. that means an AP in the house plugged into the existing network.. and AP unit perhaps on the outside of the garage.. or in windows if you have a window in the house that looks at a window in your office. Look at products from companies like ubiquiti.. they are not too expensive but professional equipment and designed for precisely this kind of work.
Hence the reliability is dramatically better than domestic stuff.. and will require a lot less work to maintain the link.
Conclusion.. wire it.
Unless you rent the house.. an investment in ethernet cabling install once properly and forget .. beats every other solution even if it costs x5 as other solutions.

Not Sure How to Set Up my Online Number

I live in Kentucky, USA, and my girlfriend is in Accra, Ghana. I'd like to set up a number local to ghana, but it doesn't show as an option. This seems to be the way the help page suggested as the best practice. How should I proceed for my situation, and will an alternate situation end up costing me a lot of money? I'm new to this so keep that in mind please.
Thanks for any help in advance.

Skype Online numbers are only for receiving calls on Skype from the 'regular' phone network (including cellphones and landlines) and apparently they are not available in Ghana
however, you can use Skype to call landlines and mobile numbers in Ghana if you have enough Skype credit to pay for the per-minute Skype charges for such calls, or if you have a suitable subscription that will cover them
here might be a good place to start to consider your options http://www.skype.com/en/rates/
Regards,
Neil

Get a French online number from an Italian Skype M...

Hi,
in order to get a French online number is a proof of residence required in any case (individual vs Skype manager)?
I have an Italian Skype Manager and would like to set up a French online number. Do I need a proof of Residence in France? If yes, is a proof of residence in France enough or it must be in the area I would like to set up the number in (ex. Paris number)?
Thanks

glennivy1 wrote:
Also I want to ask how to check if that existing online I have has now expired?
You won't be able to change your existing Online Number to one in a different area or country, but you could purchase a new number in the area and/or country you want. One way is to log into your account on the Skype web site (using the "Account" link above), then go to Online Numbers. You will see a link to purchase another number, and see your existing number(s) with the date that each number expires. You can have up to 10 Online Numbers.
If the first number is no longer needed, you don't have to do anything with it. It will expire, and then after the 90-day grace period where you can reclaim the number, it will drop off your account.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

ONLINE number is TAKEN - WHERE'S SKYPE support?

I paid 1 year subscription for a number that someone else is using. I set up my voicemail and it still rings at someone else's number. However, when I place a call that caller ID shows-up, but it does not help because IT DOES NOT WORK AS MY ONLINE NUMBER!
I'd be happy to change the number, I just need some number to work ASAP!
No one has offered a solution or help so far. This forum is more like blind leading the blind and I can't reach anyone at SKYPE support. Seems like going premium is the only way to get support - but if I can't reach anyone at SKYPE now - I can only guess how easy it will be to cancel the recurring monthly premium subscription! How do I contact support or account so I could at least concel and get my $60 returned if they can't fix this? Thanks!

you need to go into your account, cancel your existing Online Number and then purchase another
the fact that the existing number has apparently already been allocated to someone else, perhaps not even a Skype user, is NOT uncommon in the industry, so I wouldn't come down too hard on Skype
note that canceling a Skype service normally just means NOT RENEWING IT, so to get the necessary refund you will need to contact Customer Support after you cancel, and provide the necessary details
https://support.skype.com/support_selection
note also that you would likely get better response if you were to have posted in the correct forum
http://community.skype.com/t5/Payments-and-Billing/bd-p/Payments_billing
Regards,
Neil

I want to get a different online number

Hello Skype..
I need help on getting a new different online number. I already have an online number
but I want to change it to a different state number. What will I do?

glennivy1 wrote:
Also I want to ask how to check if that existing online I have has now expired?
You won't be able to change your existing Online Number to one in a different area or country, but you could purchase a new number in the area and/or country you want. One way is to log into your account on the Skype web site (using the "Account" link above), then go to Online Numbers. You will see a link to purchase another number, and see your existing number(s) with the date that each number expires. You can have up to 10 Online Numbers.
If the first number is no longer needed, you don't have to do anything with it. It will expire, and then after the 90-day grace period where you can reclaim the number, it will drop off your account.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

How to extend an existing online number ?

Similar Messages

Maybe you are looking for