How to extend the BP List

Hi Friends,
Please let me know how to extend the List view 100 to more in transaction BP.
Regards
Ricky

hi frnd....
u can use this code once
   CALL FUNCTION 'BAPI_BUPA_ROLE_ADD_2'
  EXPORTING
    businesspartner                   = customer_data-partner
  BUSINESSPARTNERROLECATEGORY       =
  ALL_BUSINESSPARTNERROLES          = ' '
   businesspartnerrole                = <wg_part_grp05-partnrole>
  DIFFERENTIATIONTYPEVALUE          =
  VALIDFROMDATE                     =
  VALIDUNTILDATE                    = '99991231'
TABLES
   return                            = tbl_return.
           CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait   = c_wait
          IMPORTING
            return = tbl_return.
I have tried.....its working for both standard roles and also for custome roles

Similar Messages

  • How to extend the range of my Airport Extreme network by adding an Airport Express

    How to extend the range of my Airport Extreme network by adding an Airport Express?

    You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
    The instructions that I will provide are for using AirPort Utility 6.0, which you have.
    Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
    Make sure that the wireless is turned on your Mac
    Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
    Click on the rectangle, and then click on the AirPort Express xxxxxx listing
    AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that  the Express be configured to "Extend" your wireless network.
    Edit the Base Station name to your liking, then click Next in the lower right hand corner
    Allow a full minute or two let AirPort Utility do its work
    When you see Setup Complete, click Done at the lower right of the window.
    Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
    You should be in business.

  • How to extend the WebUI product search results with customer attributes

    Hello,
    We are using CRM 7.0. We want to extend the WebUI product (Object) searches with customer attributes and to display customer attributes in the search results. We found the note 1026956 that explains how to extend the WebUI product (Object) searches with customer attributes. We want to know if there is also some note that explains how to display customer attributes in the search results for products/Objects.
    Thanks in advance,
    Sergey Kozyrev

    Sergey,
    I doubt whether there exists such note. The note 1026956 which you mentioned is for enhancing the Search for Custom attributes. For Enhancing the Result list you need to do custom development.
    Regards,
    Harshit

  • How to use the Pull List in Discrete Scenario?

    Hi Gurus,
    I am using pull list MF60 in REM.
    How to use the Pull List for creating material reservations in Discrete Scenario also?
    Anyone used this Pull list in discrete, pl share.
    How is helpful in discrete scenario?
    Srini

    Hello,
    You can use Pull list for st.location transfers, if you are into WM managed then this pull list used a lot.
    You can use the pulllist to the max. extent. But with IM managed plant the use is limited and this is used only for storage location transfers.
    Issue cannot be done for Production orders. You can bring the materials to the req. storage locations and after that you have issue in the order or manually for the order.
    Regards,
    Manick.

  • Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

    hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
    could you tell me how best to set airport express up to extend my wifi range?

    Greetings,
    This is called an "Extended wireless network".
    Read this article for details and steps on how to extend your TimeCapsule's network:
    http://support.apple.com/kb/HT4259
    Cheers.

  • How to get the whole list of Iview Templates

    Hi,
    when I navigate:
    Portal Content -> Content Provided by SAP -> Templates -> Iview Templates
    I get a long list of templates including Url Iviews etc
    But, when I try to create my own Iview, the list of potential templates is much smaller, mainly including only the SAP related templates, BSP, Query, ITS etc.
    Does anyone know how to make the full list of Iview Templates available for the Iview creation wizard ?
    Thanks,
    Tomas.

    Hi Tomas,
    which iView templates are offerd within the iView creation wizard is determined by SystemAdmin -- Permissions -- Portal Permissions -- Applications.
    Normally, you will have to have SuperAdminRole to see/change these settings.
    Hope it helps
    Detlev
    PS: Please consider to reward points for helpful answers. Thanks in advance!

  • How to enable the full list of developer options on A806?

    How to enable the full list of developer options
    Moderator note:Moved from http://forums.lenovo.com/t5/Lenovo-Android-based-Tablets/No-Animation-speed-options/td-p/1359241
    Edited & created a new thread.

    -Go to menu, settings,
    -about phone
    -scroll to the bottom and find "build number"
    -tap it 7 times (upon completion, it will say that you're a developer)
    -the menu is now near the bottom of the main settings menu (just above about phone)

  • How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform

    How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform
    I want to extract the freqency distribution, cycles per freqency, and samples per cylce of swept waveform, in order to output the same of swept waveform with I have acquired by NI DAQ card, tks!
    owen wan
    Attachments:
    Untitled 1.vi ‏2333 KB

    Look inside the palette called Signal Processing - Waveform measurements.  There are a lot of functions here that you can use to get the information you desire.  For instance, the Extract Tones function will output an array of clusters, with each cluster element giving the frequency, amplitude, and phase of the signal component.  Go through the entire arry to see each frequency component of the complex waveform.
    Also, in the Waveforms palette there is the Get Waveform Components function that will give you t0, dt, and Y components of the waveform.  1/dt should give you the sample rate.  See attached VI.
    - tbob
    Inventor of the WORM Global
    Attachments:
    WfmInfo.vi ‏4658 KB

  • How to get the users list that can Add/Remove or modify Vendors in Oracle?

    How to get the users list that can Add/Remove or modify Vendors in Oracle?
    I need to generate a report like name and responsibility. Thanks

    That query gives the Supplier information.
    But what i would be needing is to find out the USERS in oracle who can Add/Modify or Remove Vendors.
    I assume it should be based on the Responsibility.

  • How to maintain the contact list in the phonebook when i change my sim card

    how to maintain the contact list in the phonebook when i change my sim card

    The SIM has not affect on the contacts in an iPhone. Unlike other devices, the contacts are not maintained on the SIM card.

  • HT4759 How can make the events listed in my chalenda become automatically a reminder in the reminder?:

    How can make the events listed in my chalenda become automatically a reminder in the reminder?:

    Welcome to the Apple community.
    Calendar and reminders are two different and separate apps, you cannot transfer information between the two of them.

  • How to extend the range with a second Airport Express? Do I need a DSL cable?

    How to extend the range with a second Airport Express? Do I need a DSL cable?

    Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
    I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
    If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance.  But, wireless might work OK for you if you want to try that.
    Let us know "how" you want to extend......wireless or wired?

  • How to run the basic list in background to generate secondary.

    How to run the basic list in background to generate secondary and spool for the secondary.Please note that Basic list will run in foreground.

    Problem solved.

  • Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

    Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

    Hi trineram,
    Welcome to the Support Communities!
    The article below may be able to help you understand the parameters for adding music to an iMovie for iOS project.
    iMovie for iOS (iPad): Add background music
    http://support.apple.com/kb/PH3192
    Cheers,
    - Judy

  • How to disable the Directory listing for the whole server or a particular a

    Please let me know how to disable the Directory listing for the whole server or a particular application.
    Thank You

    I want to disable the tab focusing( tab index) for a JTextField objectsLook through the API and find methods with the word "focus" in the method name.
    Also can u tell me about how to change the tab index orders for JTextFields."How to Use the Focus Sub System":
    http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html

Maybe you are looking for

  • Adding logic based on page number

    Hi, in my invoice report, i need to add some logic based on page number. My objective is to print a group of 4 lines (OMR Marks) on right hand side of the page. For example, on first page, print 1st line only, on second page, print 2nd line only, on

  • How to fin out each user is member of which subsites/sites groups

    we have new web application whic has ropund 10 sites collections and each site collection as number of subsites. we are using AD users and sharepoint security Groups . how can we identify a user is invited/part of which all all subsites?

  • Which macros does BEx Analyzer use? How to call the refresh macro?

    Hi everybody, I would like to get an overview about which macros the BEx Analyzer uses, espacially the macro which is responsible for refreshing the workbook. I want to know what BEX Analyzer is doing when I open the variable screen, I assume there i

  • NID and Notification?

    Hi All! How to close a NID when the user changes status to say 'Submitted' or 'Incomplete' for a doc. The message for the NID is MAW_M_HOLD_UNTIL_STAT_CHANG, 1.How to get the NID from above message using Java 2.How to use NotificationAPI.setAttrText

  • Logo Change in E-Recruiting

    Hi All,       Can anyone guide me the steps to change the Logo in the E-recruiting page?      Component Name - HRRCF_C_STARTPAGE      View Name - VW_HEADER      I have uploaded the new image under the MIMES folder in the Component HRRCF_C_STARTPAGE.