How to extract data for 0FI_GL_50

hi guys,
we need to use datasource 0FI_GL_50, delta is not supported for this datasource, how can we extract data from ecc?

Hi Ester,
If the datasource doesn't support delta load.....then you can't help this.
For ODS it will not be a problem if you keep the aggregation type as "Overwritten"....
But if you want Aggregation Type summation in the ODS level then you have to delete the content of the ODS before loading.....
For Infocube level duplicate records will be there......but you can avoid duplicate records in the following way...........
Use a Full DTP to load from ODS to cube and in the Process Chain you include the Process " Delete Overlapping Requests from infocube".....it will delete the previous request.......then there will be no duplication of records......
Actually what I feel is......there shoukd be three stage of loading.....
a) In the first level a ODS should be there with Aggregation Type Overwrite, so no need to delete the content..
b) 2nd level ODS with Aggregation type Summation, deleteion of the content required...
c) Then from ODS to cube.....include the step " Delete Overlapping Requests from infocube" at the end..
Regards,
Debjani.....

Similar Messages

How to Extract Data for a Maintenance View, Structure and Cluster Table

I want to develop 3 Reports
1) in First Report
it consists only two Fields.
Table name : V_001_B
Field Name1: BUKRS
Table name : V_001_B
Field Name2: BUTXT
V_001_B is a Maintenance View
For this one I don't Find any Datasource
For this Maintenance View, How to Extract the Data.
2)
For the 2nd Report also it consists Two Fields
Table name : CSKSZ
Field Name1: KOSTL (cost center)
Table name : CSKSZ
Field Name2: KLTXT (Description)
CSKSZ is a Structure
For this one I don't Find any Datasource
For this Structure How to Extract the Data
3)
For the 3rd Report
in this Report all Fields are belonging to a Table BSEG
BSEG is a Cluster Table
For this one also I can't Find any Datasource,
I find very Few Objects in the Datasource.
For this One, How to Extract the Data.
Please provide me step by step procedure.
Thanks
Priya

Hi sachin,
I don't get your point can you Explain me Briefly.
I have two Fields for the 1st Report
BUKRS
BUTXT
In the 2nd Report
KOSTL
KLTXT
If I use 0COSTCENTER_TEXT Data Source
I will get KOSTL Field only
what about KLTXT
Thanks
Priya

How to extract data for particular two members of same dimension.

As per the requirement i need to export data for certain members of a dimension. Lets say we need data for two account members A and B which is in in Account dimension only but is not a direct children. I need the data for all the available years too. Please suggest me how my DATAEXPORT command should look like.
When i am using an AND statement it is not working accordingly. Say i am fixing for years 2007 and 2009 but the output file is coming for 2009 and 2010.
Something other is happening when i am fixing OPEX_31 and OPEX_32. The values are coming not only for OPEX_31 and OPEX_32 but for many more accounts too.
Here is my dataexport statement for your reference
SET DATAEXPORTOPTIONS
DataExportLevel "ALL";
DataExportColFormat ON;
DataExportDimHeader ON;
DataExportOverwriteFile ON;
FIX("LC","Total_Year","ESB1","2009","SIERRA","COSTCENTER_NA","CELLULAR_NA","OPEX_31",
"January","February","March","April","May","June","July","August","September","October","November","December");
DATAEXPORT "File" " " "D:\exports\feb.txt";
ENDFIX;
I need data for OPEX_31 and OPEX_32 for all the available years starting from 2001 to 2025.
Please suggest what are the modification needed to get the desired result.
Thanks in advance

Hi,
There a few different options you can use for fixing on the months, years..
e.g. FIX(January:December)
or FIX(@CHILDREN(YearTotal)) < depends what the parent of the months is
sames goes for years
FIX(2009:2025)
or
FIX(@CHILDREN(Year)
If your period dimension is dense you can always use that as the column header e.g. DataExportColHeader "Period" and then fix on the accounts you require.
Cheers
John
http://john-goodwin.blogspot.com/

How to extract data for condition records with different valid periods

Dear Gurus,
There was an error in the recent condition records price upload. Now, i want to extract the data into excel file depending on different valid dates. Please let me know how can i do this... in the extracted file i would like to have fields like, valid on and valid to dates, condition type, price list type, material, condition record no. , last changed date, last changed user id etc., please suggest...thanks in advance..
rgds
suri

hi suresh
create a quick query (SQVI) and extract to excel table KONP
only thing you need to take care is table join for fields datab ( valid from) and tatbi (valid to) you need to take from right table which are present A-table,
Anil

How to extract data for this tcode

Hello BW Experts,
I have a transaction code in R/3. i observe that is a using a program P1 and structure S1 to generate the table display in the r/3 transaction.
i go to se38 and display the code, it seems to be a module pool.
Any suggestions for extraction of this data is highly appreciated.
Thanks,
BWer

Hi,
if you know ABAP, analyze the code, which tables are getting update with that. based on these tables either you can create generic extractor or you can search for business content.
you can use SQL Tracer also to find the tables.
go to ST05 --> SWITCH ON THE DEBUGGER(sql trace) > go to your custom transaction> create a entry> then come back to st05 deactivate the trace> then go with display trace.
there you will see what are the tables used for this.
Hope this helps.
All the best.
reagrds,
Nagesh Ganisetti.

How to extract data for these fields from R/3 ?

Hi frnds,
My requirement is to extract the following fields which
are related to MM: Condition type, condition
value, Bill of lading, Qty in external delivery note,
Different invoicing party, Invoicing document from R/3 to
BI. But i found that they are not in any purchasing
datasources or inventory datasources ( Except different
invoicing party but the values are not picking up through
standard extractors ).
Anyone please tell me are there any standard datasources for extracting these fields ?
If not, if i want to enhance datasources for these fields
which datasource do i need to enhance i.e
2lis_02_itm,2lis_02_scl,2lis_02_s012 or 2lis_03_bf,
2lis_03_um ?
Full points will be assigned.
Regards,
Bhadri M.

Hi.......
I think you have filled the set up table..........and you have replicate the datasource also.......and after replicating you have activated in the BI side........
Then it should extract the data............
Are you in BI 7.0...........
You try one thing...............
Replicate the datasource again............and then activate the transfer rules using program : RS_TRANSTRU_ACTIVATE_ALL...........
Also check the selection tab of your Infopackage........may be you are giving some selection.........also check if it is coming till PSA..........if it is coming till PSA.....then check your transformation and DTP.......
It may help you...........
Regards,
Debjani..........
Edited by: Debjani Mukherjee on Sep 21, 2008 11:18 AM

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

How to extract data from custom made Idoc that is not sent

Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!

Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT          FIELDNAME           LENGTH
SEGMENT1         FIELD1                   4
SEGMENT1         FIELD2                   2
SEGMENT1         FIELD3                   2
Data in EDID4 would be as follows
IDOC           SEGMENT                          APPLICATION DATA
12345         SEGMENT1                        XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data.

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

How to extract data from Essbase to Flat File using ODI

Hi,
Anyone know how to extract data from Essbase to Flat File using ODI?
Thanks in advance.
Regards,
Sumardi

Hi,
Have you read through :-
Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
If you have read them and are still have a problem at what stage are you having the issues?
Cheers
John
http://john-goodwin.blogspot.com/

How to extract data from XML file with JavaScript

HI All
I am new to this group.
Can anybody help me regarding XML.
I want to know How to extract data from XML file with JavaScript.
And also how to use API for XML
regards
Nagaraju

This is a Java forum.
JavaScript is something entirely different than Java, even though the names are similar.
Try another website with forums about JavaScript.
For example here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3

How to extract data by using function module in generic extraction please

how to extract data by using function module in generic extraction please give me steps required

Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram.

How to extract data from MDTC table.

Hi all.
I want to fetch data from MDTC table. But in that table field CLUSTD contain compressed data. How can i extract that data.
Can i extract data for structure MDPSX.
is MDTC table is used in function module MD_STOCK_REQUIREMENTS_LIST_API .
Please help me and give the information.
thanks.

Dear Sam,
I would suggest you to have a look at the function module CHANGEDOCUMENT_READ u2013 you can use this function module as a core in the developed function module for generic extractor. Unfortunately, the suggested function module can not handle import parameters for field names, so the strategy which can be applied here is to use this function module to fill the internal table based on restrictions on object class and table name and then go through filled internal table and delete records which are not relevant for fields KOFIZ or ABRSPERR.
As for delta implementation, would you please advise if delta relevant field based on timestamp generated on date and time of the change document is sufficient for your needs? If so then you can use fields UDATE and UTIME to generate timestamp on them including the field containing generated timestamp to the extract table. Next step here is to choose this field as delta relevant field in the Generic DataSource maintenance (TCode RSO2).
Please inform me if this solution suits you or if you have any questions or concerns regarding it.
My best regards,
Vadim

How to extract data for 0FI_GL_50

Similar Messages

Maybe you are looking for