How to extract data from BCS consolidation cube to Group BW extraction cube
Gurus,
I have to figure out a way to extract data from a local BCS consolidation totals cube to a group BW extraction cube via a virtual cube in between the too...How can i do the extraction and what are the different ways in which it can be done..
Detailed steps would be appreciated....also how shud i proceed towards this...
Thanks
Cheers:
Sam
Hi Sam,
Instead of extracting you can also consider reporting on the data with a multiprovider.
There is a doc here that might be useful
http://www.affine.co.uk/files/How%20to%20Create%20a%20MultiProvider%20over%20BW%20and%20BCS.pdf
Kevin
Similar Messages
-
How to populate data from table into Radio button group in Form 10g
Hi,
I have a table with 2 columns, i.e. criteria and weight.
The weight column will contain either 5 or 4 or 3.
I want to design a form (10g) as follows:
CRITERIA----------------------------WEIGHT------------------
------------------------HIGH----------MEDIUM-------------LOW
Cost-------------------o
Duration-------------------------------o
Maintenance-------------------------o
If the criteria contains 5, it will show as HIGH, MEDIUM for 4, LOW for 3.
Do I need one radio group for each CRITERIA column?
How can I populate the table and display as above programatically in the form?
Edited by: srtusar on 26-Mar-2009 04:49
Edited by: srtusar on 26-Mar-2009 06:48Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null. -
hi
here i want to extract data from the XY graph . I attached vi which i use for 1D array . how i can use this VI for 2D Array.
Thanks
Solved!
Go to Solution.
Attachments:
select data.vi 28 KBHi
I am facing problem to extract data from XY graph . I need to extract data between two cursors in a graph into an array. I was trying out the method mentioned over here but I couldnt get exact values between cursors.
Thanks
Attachments:
extractdata xygraph.png 103 KB -
Extract data from R/3 using RFC
Hi!
Can any one tell me can I extract data from R/3 to BW usinf an RFC. My project has an implementation of RFC to bring the data from R/3 to BW and execute some functions on it.
Please let me know what are the steps to create RFC to extract data from R/3 (If possible)!
Regards,
Sri HarshaHi,
Check the below threads.
Unable to fetch data from R/3
Problem in extracting data from R/3 to BI 7.0
Extraction from R3 table to BW
RFC to file scenario
Regards,
Maha -
How to extract data from info cube into an internal table using ABAP code
HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAYHI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY -
How to extract data from BW cube
Hello friends,
Kindly advice me how to extract data from BW cube.
My requirement is to write an ABAP program to retrive the data from the BW cube.
Kindly provide me any sample code for my requirement.
Thanks in advance.
S.Jaffer AliHi Jaffer,
If you want to load the data from the BW cube into any other Cube/ODS in the same of another BW system you can use the export datasource.
If you want to load the data from the BW cube into any other system then you can use any of these options:
1. Infospoke - Open hub service and is widely used.
2. APD
3. RFC enabled fn modules.
Bye
Dinesh -
How extract data from bw cube to MS SQL server.
Hi all,
This is Sateesh.In my requirement, i need to extract date from BW Cube and to be moved to MS SQL server.can any one give the slution .Pls give me the process how to move from bw to sql server.HI Kumar,
Try with Open Hub.........
Check these.....
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c5/03853c01c89d7ce10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/59/90070982d5524b931ae16d613ac04a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/c2463c6796e61ce10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f92595-0501-0010-5eb5-bb772d41ffa4
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e830a690-0201-0010-ac86-9689620a8bc9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/frameset.htm
/people/happy.tony/blog/2006/09/18/hyperion-essbase-data-extraction-transformation-and-loading
/people/marc.bernard/blog/2005/07/11/reorganization-of-sap-business-intelligence-forums
Using OpenHub Unix to export to SQL Server
Infospoke
HOW TO RETRACT DATA FROM BPS 7.1 TO SRM 5.0
Regards,
Vijay. -
How to Extract data from a transaction..
Hi All
There are some transactions and report programs which are used daily to produce some results and the requirement is to extract that data into BW
so how can we extract information from a transactions and programs
Any help will be really appreciated and ofcourse rewarded ...
Regards
LisaYou can use the following methods
Method 1:
1> Create another ABAP program with logic to calculate all the fields, but instead of writing the result data to screenm, it should store it in a internal table and pass it to the extract structure.
2>Create a InfoSet query based on your ABAP program and use that InfoSet
3> Create a DataSource based on this InfoSet query and extract data from the DS to you ODS/Cube
In this method there is no Intermediate storage used.
Method 2:
1> Modify the report/transaction program to store the required data into a Transparent Table (u can create one from SE11) in addition to displaying on the screen.
2> Create a View on this transparent table (from SE11)
3> Create a DataSource on that view and extract data from that into your ODS/Cube.
Here, the required data is stored in the Table in addition to the DataTarget.
But, to implement either of these solution, you will need a decent ABAP knowledge. Else, it will give you a tough time!
Good luck!
Regards,
Sree -
Best way to extract data from archived cube
Hello Experts,
Can anyone tell me best way to extract data from archived cube.
Basically I am trying to pull all the data from archived cube and then load it into another brand new infoprovider which is in different box.
Also I need to extract all the master data for all infoobjects.
I have two options in my mind:
1) Use open hub destination
or
2) Infoprovider>display data>select the fields and download the data.
Is it really possible to extract data using option (2) if records are too high and then load it into another infoprovider in new system.
Please suggest me the pros and cons for the two options.
Thanks for your time in advance.Hello Reddy,
Thanks a lot for your quick reply.
Actually in my case I am trying to extract archived infocube data and then load it into new infoprovider which is in different system. If I have connectivity I can simply export data source from archived infocube and then reload into new infoprovider.
But there is no connectivity between those two systems (where archived cube is and new infoprovider) and so I am left with the two options I mentioned.
1) Use Open Hub
or
2) Extract data manually from infoprovider into excel.
Can anyone let me know which of the two options is the best and also I doubt on how to use excel in extracting data as excel have limit of no.of records 65536
Thanks
Edited by: saptrain on Mar 12, 2010 6:13 AM -
When I extracting data from DSO to Cube by using DTP.
When i am extracting data from DSO to Cube by using DTP.
I am getting following erros.
Data package processing terminated (Message no. RSBK229).
Error in BW: error getting datapakid cob_pro (Message no. RS_EXCEPTION105).
Error while extracting from source 0FC_DS08 (type DataStore) - (Message no. RSBK242).
Data package processing terminated. (Message no. RSBK229).
Data package 1 / 10/04/2011 15:49:56 / Status 'Processed with Errors'. (Message no. RSBK257).
This is the brand new BI 7.3 system. Implementing the PSCD and TRM.
I have used the standard business content objects in FI-CA (dunning history header, item,activities) and standard Datasource (0FC_DUN_HEADER ,0FC_DUN_ITEMS, 0FC_DUN_ACTIVITIES). I have extracted data till the DSO level . when I try to pull the data to info provider level(cube) using DTP . I am getting fallowing error.
my observation: when ever I use the DSO as source to any target like another DSO or cube. its throwing same kind of error for any flow including simple Flat file .
please suggest any one whether do I need to maintain basic settings since its a brand new BI 7.3.
please help me out on this issue . I am not able to move forward .its very urgenthello
Have you solved the problem ?
I have the same error...
as you solve this error,
can you help me please I have the same error
yimi castro garcia
[email protected] -
How can I join 3 tables while extracting data from SAP R/3?
I have 3 tables with the following columns
Emp table (emp)
emp_id
emp_name
emp_add
Dept table (dept)
dept_id
dept_name
dept_loc
Location table (loc)
loc_id
loc_name
Now. If I want to select data from loc_id = 10 and emp_id between 2000 and 3000
How to join these three tables while extracting data from R/3
join condition
loc.loc_id = dept.loc_id
and dept.dept_id = emp.dept_id
and loc.loc_id =10
and emp.emp_id between 2000 and 3000.
Could any one let me know the procedure to extract this data into BW system.Hi,
shouldn't your join condition be:
loc.loc_id = dept.DEPT_LOC
and dept.dept_id = ??
If you can join the three tables then create a generic datasource (RSO) based on a view (create your view with your join in SE11).
Enable the loc_id and the emp_id as selectable in the datasource so you can then select the values from a BW IPack.
hope this helps...
Olivier. -
How to Extract data from a Request management tool to Apex to avoid working on Excel reports
Client uses a ticketing tool,I donot know what is the database for the tool,but I would like to know the best way to extract data from the tool to pex so that we can eliminate working on Excel reports.These excel reports are basically the open request log,resolved tickets,aging tickets etc,currently we work on many excel reports,can we achieve this in Apex ,if so how do we achieve this.Then we would like to use this report and prepare multiple charts,how the above two requirements can be mapped.
A very important function for the system will be - one sends an email in certain format to a dummy email address, then some data will be extracted from the email based on the pre-defined format and inserted into the database my APEX application is using.
Any idea on how I can make it happen please? I agree that this is not really an Apex question, but a more general PL/SQL question.
There are many approaches, all boiling down to one of these two:
1) Push: Some process in the mail server sends/forwards information to your database when new mail arrives.
The language/tools used to do this, and the way it would connect to your database, depends on your environment (what is your operating system? mail server? existing middleware/tools? security protocols used? etc.).
2) Pull: Some process in the database contacts the mail server and polls for new information.
Ie. some PL/SQL code would communicate with the mail server. Again, it depends on your environment (what is your operating system? mail server? existing middleware/tools? security protocols used? etc.).
For example, if you are using Exchange 2007 or newer, it has a web services API:
http://msdn.microsoft.com/en-us/library/dd877045.aspx
The challenge here will be to build the correct SOAP requests from PL/SQL, and to handle the security protocols used.
- Morten
http://ora-00001.blogspot.com -
How to extract data from a structure?(Data Dictionary)
Hi all,
This is regarding extracting data from a structure.
For Eg:if we want to extract data from a structure ADDR1_DATA,How will we do that in report programming?Structures on its own has no existence unless it s attached to a database table or view.when am using 'Where used List' on that structure also I am not getting any database tables or views.What can I do about this?
Thanking you,
anjalyHI Anjaly,
as you said structure does not have any value .. unless something is added to it..
So just use the structure to define the type of the sttructure you want..
Or to include it in your itab like..
data : Begin of itab occurs 0.
include structure ADDR1_DATA.
data i type i.
end of itab.
you cannot directly extract data from the structure ADDR1_DATA..
regards
satesh -
How to extract data from multiple tables (always got errors)
Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
PratThanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat -
How to extract data from the fields present in two or three tables
Hi Experts,
I have a scenario where i have to extract data from the fields of different tables. e.g. let there 2 tables which have some number of fields . I want the data of 3 fields each from these 2 tables. How can i get that??
SamHi
You can create view in tcode se11..
here you include all tables from which you want to fetch the data..
you need to give selection condition here
eg..
say select empname from table A, select empadd from table B.. where empno(from A)=empno(from B)
(note that you dont need to write queries like this.. i have just given u the example)
After creating the view you can create datasource in RSO2..
Regards
Swati
Maybe you are looking for
-
Do anyone know how to stop reminders in iCal with ms exchange under iOS6 beta?
Since I've started testing iOS 6 beta, I can't kill the reminders in exchange calendar....after restart the calendar app, they are there, again... Nothing to see in the mac cal app or in the owa! No reminders, especially on iPhone 4 and iPad 3, runni
-
Mail is getting stuck in my outbox?
Hi I've got a 13" Macbook Air that's about 12 months old. It's got a 1.7ghz I7 processor and 8GB of RAM. About 2-3 weeks ago I started having intermittent issues sending email where my mail just sits in the outbox and doesn't send. I'm using the App
-
Hi, I'm doing a project for a my class doing a simple sunrise/sunset program. I've noticed that if I either create simple images in fireworks and import them, or even images form the web, I get an error message saying "Bad Image Data Error!" and all
-
ABAP/4 ERROR IN PROCESSCHAIN
Hi experts iam getting error at abap program in processchain ERROR: ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED and it leads to short dump : What happened? You attempted to extend an internal table, but the required space was not availa
-
As far as sharpening goes. When you are modifying your photos and saving them, do you sharpen all of them, or do you only sharpen the ones that are only really in your face blurry?