How to extract PDF files into the directory the PDF file is located in.

I use Adobe Acrobat to extract all the pages within a single PDF file to single page PDF files. However the steps are long, as the path to a directory where i wish to extract is thru the net work and the default location for Adobe is to my C:Drive... So I have to Browse the path to extract to Which can be between 10 and 15 steps depending on the job folders. Most programs when you extract, the default path is usually where the file location is, with an option to change the path.. makes sense and is very easy.
So without making a short cut(because the path constantly changes depending on the jobs). How do I extract directly to the folder that the PDF file is in? Example, when you extract a zip file, its default location is right there where the zip file is in. Quite simple and logical.

Thanks Gilad, but that does not make the task easier. The path always changes as the files are being organized into folders. Its kind of sad that $400 software can't do what most free ware can do. Extract itself into the folder it is sitting in.

Similar Messages

How to convert a PDF file into a full editable WORD file?

Hi,
I tried to convert a pdf file into word but it is not fully editable. I can edit the title from the main page and that's it. The rest of the word document is saved as image. I tried editing teh pdf file but that one is not working either.
Please help on how to convert a PDF file into a full editable WORD file.
Thank you

Not all PDF files are created equal. When a PDF file is created with Adobe Tools it is usually "tagged" with information about the fonts the images, the layout etc... This way when the PDF is saved to a new format like PPT or DOC then the results are usually usable. However, if you have a PDF file that was not tagged for some reason then run the Accessibility tools on the PDF to acquire some basic tagging. This may get you a better result. Also if you have a PDF that is an image, then you may want to run OCR on it.

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

How to upload and download a files into AL11 directory in ABAP

Hi,
How to upload and download a files into AL11 directory in ABAP
thanks
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Mar 21, 2011 9:18 AM

You should try one of these forums for an answer to your question:
http://swforum.sun.com/jive/forum.jspa?forumID=116
http://community.java.net/netbeans
http://linux.java.net

I'm having problems with a message that says: An error occurred while Attempting to create the directory: C:/program files/itunes/cd configuarion

I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Bullsh*t Windows can help me with anything from Apple.
So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
. . . . . . . . . . . . Help me.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

How to convert a jpeg file into a 1-bit bmp file (2 colors image)

Hi. I�m having serious problems to convert a jpeg file into a 1-bit bmp file (2 colors image).
I�m using FileSaver.saveAsBmp(String t) but what i get is a bmp image, but with 16M colors, but what i want is a 2 colors bmp file. A black and white image.
Does anybody know how to do this? I�m really getting crazy with ths problem.
Thanks in advance

Hi opalo,
this code may help you...
import java.awt.*;
import java.io.*;
import java.awt.image.*;
import javax.imageio.ImageIO;
class Write1 extends Component {
//--- Private constants
private final static int BITMAPFILEHEADER_SIZE = 14;
private final static int BITMAPINFOHEADER_SIZE = 40;
//--- Private variable declaration
//--- Bitmap file header
private byte bitmapFileHeader [] = new byte [14];
private byte bfType [] = {'B', 'M'};
private int bfSize = 0;
private int bfReserved1 = 0;
private int bfReserved2 = 0;
private int bfOffBits = BITMAPFILEHEADER_SIZE + BITMAPINFOHEADER_SIZE;
//--- Bitmap info header
private byte bitmapInfoHeader [] = new byte [40];
private int biSize = BITMAPINFOHEADER_SIZE;
private int biWidth = 50;
private int biHeight = 70;
private int biPlanes = 1;
//private int biBitCount = 24;
private int biBitCount = 1;
private int biCompression = 0;
private int biSizeImage = 0x030000;
private int biXPelsPerMeter = 0x0;
private int biYPelsPerMeter = 0x0;
private int biClrUsed = 0;
private int biClrImportant = 0;
//--- Bitmap raw data
private int bitmap [];
//--- File section
private FileOutputStream fo;
//--- Default constructor
public Write1() {
public void saveBitmap (String parFilename, Image parImage, int
parWidth, int parHeight) {
try {
fo = new FileOutputStream (parFilename);
save (parImage, parWidth, parHeight);
fo.close ();
catch (Exception saveEx) {
saveEx.printStackTrace ();
* The saveMethod is the main method of the process. This method
* will call the convertImage method to convert the memory image to
* a byte array; method writeBitmapFileHeader creates and writes
* the bitmap file header; writeBitmapInfoHeader creates the
* information header; and writeBitmap writes the image.
private void save (Image parImage, int parWidth, int parHeight) {
try {
convertImage (parImage, parWidth, parHeight);
writeBitmapFileHeader ();
writeBitmapInfoHeader ();
writeBitmap ();
catch (Exception saveEx) {
saveEx.printStackTrace ();
* convertImage converts the memory image to the bitmap format (BRG).
* It also computes some information for the bitmap info header.
private boolean convertImage (Image parImage, int parWidth, int parHeight) {
int pad;
bitmap = new int [parWidth * parHeight];
PixelGrabber pg = new PixelGrabber (parImage, 0, 0, parWidth, parHeight,
bitmap, 0, parWidth);
try {
pg.grabPixels ();
catch (InterruptedException e) {
e.printStackTrace ();
return (false);
pad = (4 - ((parWidth * 3) % 4)) * parHeight;
biSizeImage = ((parWidth * parHeight) * 3) + pad;
bfSize = biSizeImage + BITMAPFILEHEADER_SIZE +
BITMAPINFOHEADER_SIZE;
biWidth = parWidth;
biHeight = parHeight;
return (true);
* writeBitmap converts the image returned from the pixel grabber to
* the format required. Remember: scan lines are inverted in
* a bitmap file!
* Each scan line must be padded to an even 4-byte boundary.
private void writeBitmap () {
int size;
int value;
int j;
int i;
int rowCount;
int rowIndex;
int lastRowIndex;
int pad;
int padCount;
byte rgb [] = new byte [3];
size = (biWidth * biHeight) - 1;
pad = 4 - ((biWidth * 3) % 4);
if (pad == 4) // <==== Bug correction
pad = 0; // <==== Bug correction
rowCount = 1;
padCount = 0;
rowIndex = size - biWidth;
lastRowIndex = rowIndex;
try {
for (j = 0; j < size; j++) {
value = bitmap [rowIndex];
rgb [0] = (byte) (value & 0xFF);
rgb [1] = (byte) ((value >> 8) & 0xFF);
rgb [2] = (byte) ((value >> 16) & 0xFF);
fo.write (rgb);
if (rowCount == biWidth) {
padCount += pad;
for (i = 1; i <= pad; i++) {
fo.write (0x00);
int b = 1200;
fo.write(b);
rowCount = 1;
rowIndex = lastRowIndex - biWidth;
lastRowIndex = rowIndex;
else
rowCount++;
rowIndex++;
//--- Update the size of the file
bfSize += padCount - pad;
biSizeImage += padCount - pad;
catch (Exception wb) {
wb.printStackTrace ();
* writeBitmapFileHeader writes the bitmap file header to the file.
private void writeBitmapFileHeader () {
try {
fo.write (bfType);
fo.write (intToDWord (bfSize));
fo.write (intToWord (bfReserved1));
fo.write (intToWord (bfReserved2));
fo.write (intToDWord (bfOffBits));
catch (Exception wbfh) {
wbfh.printStackTrace ();
* writeBitmapInfoHeader writes the bitmap information header
* to the file.
private void writeBitmapInfoHeader () {
try {
fo.write (intToDWord (biSize));
fo.write (intToDWord (biWidth));
fo.write (intToDWord (biHeight));
fo.write (intToWord (biPlanes));
fo.write (intToWord (biBitCount));
fo.write (intToDWord (biCompression));
fo.write (intToDWord (biSizeImage));
fo.write (intToDWord (biXPelsPerMeter));
fo.write (intToDWord (biYPelsPerMeter));
fo.write (intToDWord (biClrUsed));
fo.write (intToDWord (biClrImportant));
// DataOutputStream temp = new DataOutputStream(fo);
// int m = 32;
// temp.writeInt(m);
catch (Exception wbih) {
wbih.printStackTrace ();
* intToWord converts an int to a word, where the return
* value is stored in a 2-byte array.
private byte [] intToWord (int parValue) {
byte retValue [] = new byte [2];
retValue [0] = (byte) (parValue & 0x00FF);
retValue [1] = (byte) ((parValue >> 8) & 0x00FF);
return (retValue);
* intToDWord converts an int to a double word, where the return
* value is stored in a 4-byte array.
private byte [] intToDWord (int parValue) {
byte retValue [] = new byte [4];
retValue [0] = (byte) (parValue & 0x00FF);
retValue [1] = (byte) ((parValue >> 8) & 0x000000FF);
retValue [2] = (byte) ((parValue >> 16) & 0x000000FF);
retValue [3] = (byte) ((parValue >> 24) & 0x000000FF);
return (retValue);
class Writebmp
     public static void main(String args[])
          //Image img = Toolkit.getDefaultToolkit().getImage("jatin.bmp");
          try
          File filename = new File("jatin_test.bmp");
          BufferedImage image = ImageIO.read(filename);
          Graphics graphics = image.getGraphics();
          graphics.drawString("उजगर",10,30);
          Write1 w = new Write1();
          Image img = Toolkit.getDefaultToolkit().getImage("jatin_test.bmp");
          w.saveBitmap("jatin_test.bmp",img,200,200);
          catch (IOException e)
System.err.println ("Unable to write to file");
System.exit(-1);
}

How do you sync music into your library from another file

how do you sync music into your library from another file? After moving all my music into a new location, is there a quicker way to upload the music into the library rather than adding file by file?

Hi MonicaJani,
Thanks for using Apple Support Communities. You can also add folders of media as described here:
Adding music and other content to iTunes
http://support.apple.com/kb/ht1473
Adding content on your computer to iTunes
iTunes helps you add digital audio and video files on your computer directly to your iTunes library. You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats. You can also add video content in QuickTime or MPEG-4 format to iTunes. To learn how to add these files to iTunes follow the steps below.
Open iTunes
From the File menu, choose one of the following choices:
MacAdd to Library
Windows
Add File to Library
Add Folder to Library
Navigate to and select the file or folder that you want to add
If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
Cheers,
- Ari

How do I convert a prel file into a mpeg or avi file?

how do I convert a prel file into a mpeg or avi file?

The Elements Tutorial Links Page http://forums.adobe.com/thread/1275830 will help... click the publish/share links

__Is there a way to make a multi-layer Ai file into a multi-page PDF? (1 layer per page)

__Is there a way to make a multi-layer Ai file into a multi-page PDF? (1 layer per page)
thanks

Definitely can be done.
In CS 4 you create an artboard for each page and the position the art for the corresponding page on the corresponding artboard and make a layer for that art. This way it does not even matter if the layer s are properly layered when saving the pdf. Just as long as the artboards are.
CS 3 and earlier back a larger document that can be divided into whole pages by turning on tiling and using the page tool position that art.
Position the art for each page over the designated artboard make a layer for each pages art now when you export the with tiling on and you wll get a multi page pdf.

Get the directory where application files exist.....

Hi ,
How to get the directory where application files exist....????
I have found a way....such as:
Right - click on the application name ... on the pop-up menu... select "Add to <application_name>" and then on the window appeared... i get the dir on the title of this window....
Is there any simpler method to obtain the dir...????
NOTE: I use JDev 10.1.3. on windows XP platform...
Many thanks ,
Simon

hi Simon
If you not only want to see the path, but also want to copy-and-paste it, you can use the "Edit > Copy Path" (Ctrl+Shift-C) menu item.
success
Jan Vervecken

After I purchase a song how do I get it into my ipod - the ipod is plugged into the computer

after I purchase a song how do I get it into my ipod - the ipod is plugged into the computer

How did you purchase the song, it iTunes? If so, then sync the music to the iPod. See this support document for help with syncing content. Sync your iPhone, iPad and iPod with iTunes using USB - Apple Support

How can I drag contacts into numbers like the old version?

How can I drag contacts into numbers like the old version?

Copy and paste works. But drag and drop is also back in version 3.2. It works well here. Just drag and drop onto the canvas.Make sure you've upgraded to version 3.2 as earlier versions of Number 3 did not support drag and drop from Contacts.
Note that the column headers are misaligned if you are dragging contacts that do not contain an image. But the information in the body of the table drags in correctly.
SG

How to convert a .flv file into a Youtube sharing .mov file via Compressor?

I'm trying to convert a .flv file into a Youtube sharing .mov file via Compressor but every time I submit it, it fails due to error code -50. It worked two hours ago (albeit, very slowly) with another .flv file but now it refuses to even try. Please help!

Sorry you're having problems, but it's not surprising. The error code is invalid media.
The easy way is to forget about Compressor and upload the Flash file directly to You Tube with their uploader.
You'll also save a generation of compression loss.
Good luck.
Russ

I'm trying to import an audio file into waveburner. The file is 868.7 mb. Is that too big?

I'm trying to import an audio file into waveburner. The file is 868.7 mb. Is that too big?

No, Barry. I regularly import 1Gb and larger into WB with no problems...

Does the EBCC takes the timestamp of the files into account when the synchronisation occurs?

We are running WL Portal 7.0 sp2.
I had to re-deploy an older version of our portal application.
I put back the old portal webapp and ran the EBCC to synchronize the approprate
portalApp-project.
In the EBCC I specified "Update all the files in the project." but after the deployment
I received several stacktraces concerning webflows that couldn't be found.
Does the EBCC takes the timestamp of the files into account when the synchronisation
occurs?

tomk wrote:
The PKGBUILD has a depends array and a makedepends array. Anything that's required at runtime goes in the depends array, and must be installed for the application to run successfully. Anything that's only required at buildtime foes in the makedepends array, and can be removed from the system after the application has been built.
man PKGBUILD and various wiki pages for more details.
Anything that's only required at buildtime foes in the makedepends array, and can be removed from the system after the application has been built.
==================
Who remove them ? user or the abs ??
I think the best method is file dependence , not package dependence.....
Software is arranged by package. but its dependence is file. When Install a package, pacman check its file dependence, and install the packages which include those files....
If a not explicit installed package 's file does not required by any other packages , it can be removed automatically !
In this situation ,pacman can find packages that not needed after compilation, and remove them.
Last edited by iamybj (2010-03-22 03:15:06)

Copying files from same directory as *.java files and moving to WEB-INF/classes/ package name

In our current application we have the following source directory structure:
          src -
          - com
          - edeploy
          - subdirs ... (many directories here)
          - jsp
          -subdirs ... (many directories here)
          In com.edeploy.subdirs, there exists *.java files, and *.gxq files (query
          files). I would like to modify my build.cmd script to copy the *.gxq files
          into the same directory as the class files.
          Here's my script so far:
          @REM Create list of files to compile
          DIR /S /B /A:-D src\com\*.java >class.list
          @REM Create list of query files
          DIR /S /B /A:-D src\com\*.gxq >query.list
          @REM Compile
          javac -d stage\WEB-INF\classes @class.list
          @REM Copy query files into class directory
          .......... code needed here ......
          Can anyone help me with this?
          Thanks,
          Matt


You may want to check out:
          http://jakarta.apache.org/ant/index.html
          Gary
          "Matt Raible" <[email protected]> wrote in message
          news:[email protected]..
          > In our current application we have the following source directory
          structure:
          >
          > src -
          > - com
          > - edeploy
          > - subdirs ... (many directories here)
          > - jsp
          > -subdirs ... (many directories here)
          >
          >
          > In com.edeploy.subdirs, there exists *.java files, and *.gxq files (query
          > files). I would like to modify my build.cmd script to copy the *.gxq
          files
          > into the same directory as the class files.
          >
          > Here's my script so far:
          >
          > @REM Create list of files to compile
          > DIR /S /B /A:-D src\com\*.java >class.list
          >
          > @REM Create list of query files
          > DIR /S /B /A:-D src\com\*.gxq >query.list
          >
          > @REM Compile
          > javac -d stage\WEB-INF\classes @class.list
          >
          > @REM Copy query files into class directory
          > .......... code needed here ......
          >
          > Can anyone help me with this?
          >
          > Thanks,
          >
          > Matt
          >
          >

How to extract PDF files into the directory the PDF file is located in.

Similar Messages

Maybe you are looking for