How  to fade groups of images or multiple images at the same time?

I am creating a flash infographic, and want to fade images I have imported from Illustrator that are grouped. I would like to know how  to fade these groups and multiple images at the same time.
Thanks!

Use TweenMax for this.
the syntax is like this:
var arrayOfDisplayObjects:Array = new Array();
//with arrayOfDisplayObjects.push(DisplayObject)
//you can put any DisplayObject in the Array and when you want to fade them call this
TweenMax.allTo(arrayOfDisplayObjects,1, { autoAlpha:0} );
//to fade them in 1 second to alpha=0 and when reaching the zero make them invisible (to save processing power)

Similar Messages

  • How can I install one app on multiple iPads at the same time?

    We have a volume purchasing account, but when purchasing an app we get multiple serial numbers that all seem to need to be entered individually. The iPhone config Utility will not sync multiple iPads at the same time. Am I missing something? This cannot be the method for mass deployment, it seem too complicated.

    You can do a  backup of you iPad then restore the backup to many devices.
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    Mobile Device Management Solutions for iOS
    http://www.apple.com/iphone/business/integration/mdm/
    http://www.apple.com/ipad/business/resources/
    "iOS mobile device management (MDM)
    With an unmatched breadth of features, a Self Service console forover-the-air (OTA) distribution of in-house and app store apps, and integration with Apple's Volume Purchase Plan (VPP), the Casper Suiteallows administrators to easily achieve the four major tenets of iOSmobile device management: Inventory, Configuration, Security Management, and App Distribution."
    http://jamfsoftware.com/products/casper-suite/

  • How do I view multiple images from different projects at the same time?

    Hello
    I've been trying to find the answer in the user manual, but no luck so far.
    I did find how to open 2 projects at once, but I can only see one image at a time in the viewer and I have to keep going back and forth between projects to compare images. (These are scans of old photos and I want to eliminate the ones that are poorer quality, so need to compare numerous images from 2 sets of scans)
    How can I view an image from one project at the same time as an image from another? I know that it can be done in the same project by apple-clicking the second, third etc image, but this doesn't work if the images are from different projects.
    Thank you
    Elizabeth

    Thank you again Tony
    I've now created an album, independent of the projects, and dragged test images into it and it does just the job I needed. Now i just need to keep my brain sorted with which ones are which while i'm working
    Elizabeth

  • How to support multiple users at the same time?

    Hi all,
    I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
    I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
    How can I program the software, so that the software can be open multiple times? Do you have any example?
    Thanks a lot.
    Steven
    Solved!
    Go to Solution.

    Are all the users going to be measuring the exact same thing from the same instrument?
    It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
    The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
    As Dennis said, not a trivial process, but probably do-able...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • In Elements 7.0, how can I delete multiple photos at the same time?

    In Adobe Photoshop Elements 7.0, how can I delete multiple photos at the same time?   Please be a little specific so I can follow your instructions as I'm not real smart at computers; I'm an intermediate user.  Thank you.

    Shift-click the photos or Ctrl-click them to select them, then right-click one of them and choose Delete from Catalog. They will all go together.

  • How do you apply a master page to multiple documents at the same time?

    How do you apply a master page to multiple documents at the same time?

    Hi friends,
    Thank you for trying to help me out.
    Let me explain it a bit to remove the ambiguity.
    I have 10 documents nested under a book. Each of these documents have 'n' number of pages. I want to apply my custom made master page "First" to the first page of all these 10 documents in one go. The remaining pages of the documents have to be in default "Right" master page format. How will I do it?
    I tried selecting all the documents and importing the formats from another document with the custom made "First" master page. The master page format is getting imported but the first page of all the documents still remain with the default "Right" master page format.
    I think now my question is more clear...

  • How to display multiple reports at the same time

    Hi,
    I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
    I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
    call_report('report1');
    call_report('report2');
    call_report('report3');
    call_report('report4');
    The main problem is that, just the last report is been displayed.
    Is there some way to display report1, report2 etc in separate tabs or windows ??
    Regards
    Carlos

    You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
    The question is how you are calling the report.
    Here is how I manipulate it.
    After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
    Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

  • How do I apply same adjustments to multiple photos at the same time?

    How do I apply same adjustments to multiple photos at the same time?

    You can't but you can copy the adjustments made on one photo and apply/paste it onto another by:
    1 - Control (right)-clicking one the edited photo in the Edit mode and selecting Copy Adjustsments
    2 - Control-clicking on the next photo and selecting Paste Adjustments.
    OT

  • How to use multiple proxies at the same time?

    im planning to use multiple proxies at the same time on mac but i have no idea how to do it?!. i need help!thanks!

  • How can I get rid of multiple pictures at the same time?

    how can I get rid of multiple pictures at the same time?

    Adobe Bridge, lightroom and your file browser (windows explorer or Mac Finder) can select multiple pictures at once and then delete. If you are looking for more than that for information, you will need to be more specific at what your doing, what OS you have, and version of software your using. If necessary post screen shots so we can see what your doing. The more information we have the more detailed of an explaination can can give back to you.

  • How does iCal, or Calendar, order the display of multiple events for the same time?

    I can't for the life of me figure out how iCal orders the display of multiple items at the same time.  Does anyone have a clue?  It's not alphabetical.  It's not according the the order of the calendars in the left pane.  Is it just random?  Any help would be greatly appreciated.

    In the focus lost eventhandling start a thread which does
    the actual handling.
    the new thread waits for a little time (0.1 seconds)
    the click event of the button checks for a thread like the one above and tells it not to execute
    This way you execute the for the lost focus event only if
    the ok button isn't clicked in the same process ... not
    realy good, because it kind of relies on the ordering of threads ... but maybe it still works for you?

  • How do I edit or enter values on multiple sheets at the same time in Numbers?  I can do this Excel but don't know procedure in Numbers.  Thanks.

    How do I edit or enter values on multiple sheets at the same time in Numbers?  I can do it in Excel but I don't the procedure in Numbers.  Thank you!

    The only I way I can think of to modify a single value and have that value change in multipl locations is to have all "the other places" reference a single cell.  There is not way without a referene to modify a set of cells simulateously.
    This may be something like what you want:
    Enter a value in the table "Original Data" cell A1 and the A1 cells of tables Ref1, Ref2 and Ref2-1 will change

  • How do I delete multiple documents at the same time

    How do I delete several or multiple documents at the same time.  Do I have to delete each one individully?

    You can select multiple adjacent files or folders by clicking on the first one then shift-click on the last one.  Multiple non-adjacent files or folders can be selected one at a time by command clicking on each one.  Click on any selected file or folder then drag/drop to trash.

  • How do i uncheck multiple songs at the same time in my library?

    how do i uncheck multiple songs at the same time in my library?

    THANKS.
    i just figured out that u can highlight them then right click and the option is there

  • How do I delete multiple emails at the same time rather than individually?

    How do I delete multiple emails at the same time rather than individually?

    My mistake
    I was looking at my KB, even tested my suggestion with the command key, and then wrote option
    Barry

  • How you create a group to send many txt msg at the same time?

    How you create a group to send many txt msg at the same time?

    The iPhone does not support groups for messaging. There are apps in the app store which purport to be able to do this.

Maybe you are looking for

  • Networked HP Laserjet 1022 only prints one copy at a time!!

    Hi, I am using a HP Laserjet 1022 printer connected to a Windows Network. Although the exact driver is not listed I get around using the closest driver in the list. Under Tiger everything was fine, after upgrading to Leopard I can only print one copy

  • What are the best sequence settings in FCP 5 for exporting screen capture video footage?

    I capture video footage of websites in order to showcase in a demo reel. Using Snapz Pro, the compression type I have found to have the best quality is H264. When I take this footage into FCP (v5.1.4), I choose DV NTSC 48khz for the sequence setting.

  • Webcam on skype.

    Hello. Every time i try to turn my camera on - skype call fails. I can talk free while it's off. But as soon as i turn it on, some weird Internet connection problems appear. No matte what i do, nothing changes. I tried to reinstall skype, i tested my

  • Shortcut For Align L/R/C Edges

    Hi! I try to find in the shortcut menu, but i don't see option to set keyboard shortcuts for align edges, i try to google it but only what i have find it is for the typo SHIFT + CTRL + R/L/C and that works fine but i need for frames Does anybody have

  • Best way to build an web-based voice record player

    Could anyone please guide me on what technology to use to build a online voice recorded that would record a users voice using a flash player from a website and then the voice is saved on the server side. What would be the best way to build something