How to fetch data from different standard table to own customize table.

Hi Experts,
I want to develope an INVENTORY TURN OVER REPORT in SAP R/3.As I dont know much about Inventory.I want some one here to guide me regarding this with example so i can develope Inventory Report in R/3.
Also guide me which filed from which table i shud use.What is Inventory Turnover in details and how it is calculated.
Plz reply guys.
Thanks.
Edited by: abhishek.chaturvedi on Aug 9, 2010 8:42 AM

Hi,
Even iam not sure about it but after looking at your query even i have done some research and got some information for you.
nventory Turnover is a prominent KPI in a lot of businesses. This post will give you some understanding on the concept. In another post I will give details on how the SAP report MC44 can be used to measure inventory turns and what data is used to calculate this ratio.
Formula
Inventory Turnover = Cost of Goods Sold (COGS) / Average Inventory at value
If you are not familiar with the term Cost of Goods Sold, this is the cost of your revenues.
Average Inventory is measured in value and not in volume.
If you divide both elements you know how often you sold youu2019re average inventory. u201CSo what?u201D you ask. I will explain next.
Concept and use
I will present you with two business scenariou2019s to point out the significance of the Inventory Turnover ratio.
Scenario 1
You sell one product. You invest 10.000 EUR as starting stock. You run your business for one year and at then end of the year you are completely sold out. Your revenue accumulates to 12.500 EUR. For simplicity sake your gross profit is 2.500 EUR (12.500 u2013 10.000).
Revenue = 12.500
COGS = 10.000
Average Inventory = 5.000 (10.000 starting stock + 0 end stock / 2 = 5.000 average stock)
Inventory Turnover = 2 (10.000 / 5.000)
ROI = 50% > 2.500 (R-C) earned out of 5.000 (A)
Scenario 2
Again you sell one product. But this time you invest 5.000 EUR in starting stock. After 6 months you sold your stock and you replenish your stock again for 5.000 EUR. After another 6 months youu2019re sold out. Your revenue is again 12.500 EUR. Your gross profit is 2.500 EUR (12.500 u2013 5000 u2013 5000).
Revenue = 12.500
COGS = 10.000
Average Inventory = 2.500 (5.000 starting stock + 0 end stock / 2 = 2.500 average stock)
Inventory Turnover = 4 (10.000 / 2.500)
ROI = 100% > 2.500 (R-C) earned out of 2.500 (A)
cheers,
bhavana

Similar Messages

How to fetch data from XML and store it in internal table

Hi All,
Can anyone help me out, in fetching data from xml and store it in an internal table. Is there any standard function module is there?
Regards,
Karthick

to do this you can either develop a XSLT program and use it with CALL TRNSFORMATION key word to tranform the XML into itab .
(search the ABAP General forum, i have posted few samples)
or simply use the following FM which converts your XML into a itab of name value pair (name would holw the element name and value would hold the value of the element) which you can then loop and read it to your itb.
data:             xmldata type xstring .
data: result_xml type standard table of smum_xmltb .
data: return type standard table of bapiret2 .
CALL FUNCTION 'SMUM_XML_PARSE'
EXPORTING
    xml_input       = xmldata
TABLES
    xml_table       = result_xml
    return          = return .
Regards
Raja

How to fetch data from different sources into one source (like into Ztable)

hi friends,
As per our client requirements they want to develope an Inventory and an Ontime delivery report in BO on top of Oracle database.
Situation is some thing like they have ECC 6.0.and they want to collect all inventory and ontime delivery data at one place.According to me that could be one Ztable in which we can gather all data.Apart from that they are going to use Data Integrator in which they can directly fetch the data from R/3 system(They dont want to have BI system) and put all data in Oracle DB.On top of ORacle BO person can develop BO reports.
My question is how to fetch all data at one place and what are the tables going to be use.
kindly help me out as its very important project.
Thanks
Abhishek

The following is my standard reply to those who need to get old data from a backup in one account and add it to another account. The method described here may be applied to your case. It would be a bit of a long process, though.
When connected to the account you want to GET data from, Go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off.
When prompted choose to keep the data on the iPhone.
After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account.
Note that this only affects the "Apple data" like contacts, calendars, reminders, etc. Many third party apps also use iCloud to store data files there. These files may be lost in the process, unless the apps also keep the data locally on the device.
NOTE: Photos in the photo stream (if you use it) will not transfer to the new account. It is advised that you save the photos to a computer before performing the account switch.

How to fetch data from different tables

I have a view created based on Emp table. while querying the employee details i want to display the dept_ description from dept table. how can i do that ??
Regards Abin

you mean when you click on a emp table row you want to display dept. description?
Use the following query in the view so you have all the required information. In the table selectionlistener get the dept. description and display it.
SELECT distinct E.empno, E.ename, E.sal, D.dname
FROM dept D, emp E
WHERE E.deptno = D.deptno
ORDER BY E.empno;

Fetch data from different tables print them is assigned places

Hi Friends,
I have designed one SMART-Form (Receipt).
I need to fetch data from different tables and the data must be print in assigned places. Please help me how to achieve this requirement. Thanks for your help.
Best regards,
Manju.
Edited by: Alvaro Tejada Galindo on Feb 12, 2008 10:20 AM

U're right.
When it creates a smartform it needs to decide when the main data have to be extracted:
- or in driver program
- or in smartforms
The difference can be in the performance, because the program can select the data only once, the smartforms needs to extract them everytime it's called.
I prefer to use a complex structure for the smartform interface as so all data I need are in only one structure, the problem is the complex structure is harder to be managed.
Max

How to fetch data from PTREQ tables

I need to display data in the customised webdynpro application from PTREQ tables.
Can anyone help me out how to fetch data from these tables.

use the standard modules like
PT_ARQ_REQUEST_CHECK
PT_ARQ_REQUEST_EXECUTE
PT_ARQ_REQUEST_PREPARE

Fetch data from different database tables

Hi...
How can i fetch data from different database tables and put it into a internal table and then display it??? Can provide simple short codes as i'm new to ABAP. Thanks.

Hi,
Check this sample code..
TYPE-POOLS: slis.
DATA: BEGIN OF itab OCCURS 0,
        vbeln TYPE vbeln,
        expand,
      END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
        vbeln TYPE vbeln,
        posnr TYPE posnr,
        matnr TYPE matnr,
        netpr TYPE netpr,
      END OF itab1.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'POSNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'POSNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'MATNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'NETPR'.
s_fieldcatalog-do_sum    = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
DATA: s_layout TYPE slis_layout_alv.
s_layout-subtotals_text            = 'SUBTOTAL TEXT'.
s_layout-key_hotspot = 'X'.
s_layout-expand_fieldname = 'EXPAND'.
SELECT vbeln UP TO 100 ROWS
       FROM
       vbak
       INTO TABLE itab.
IF NOT itab[] IS INITIAL.
SELECT vbeln posnr matnr netpr
         FROM vbap
         INTO TABLE itab1
         FOR ALL ENTRIES IN itab
         WHERE vbeln = itab-vbeln.
ENDIF.
DATA: v_repid TYPE syrepid.
v_repid = sy-repid.
DATA: s_keyinfo TYPE slis_keyinfo_alv.
s_keyinfo-header01 = 'VBELN'.
s_keyinfo-item01   = 'VBELN'.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
     EXPORTING
          i_callback_program = v_repid
          is_layout          = s_layout
          it_fieldcat        = t_fieldcatalog
          i_tabname_header   = 'ITAB'
          i_tabname_item     = 'ITAB1'
          is_keyinfo         = s_keyinfo
     TABLES
          t_outtab_header    = itab
          t_outtab_item      = itab1
     EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Naren

How to fetch data from cluster tables

hi
i need to know how to fetch data from cluster tables please update me if any
i know that we cannot use joins in cluster table we use view etc
but i need detailed inforation on methods for fetching data from cluster tables
regards
Nishant

Hi,
Check the following links
http://fuller.mit.edu/hr/cluster_tables.html
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33

Can two java program write to the same port by fetching data from different

can two java program write to the same port by fetching data from different ports, if yes is thing possible for a 3rd program to get all data (is there any data loss or collision)
how is this possible

can two java program write to the same port by fetching data from different portsTwo java clients can connect to the same server port and they can both write to it. However the server will see the connections as two separate accepted sockets.

How to fetch data from Mysql with SSL.

I am using jdk1.5 and mysql 5.0.
How to fetch data from Mysql with SSL
I am using url = jdbc:mysql://localhost/database?useSSL=true&requireSSL=true.
It shows error. how to fetch

I have created certificate in mysql and checked in mysql.
mysql>\s
SSL: Cipher in use is DHE-RSA-AES256-SHA
but through ssl how to fetch data in java.

How to import data from excel or csv files to Oracle table

hello everybody,
I am new here and new in Oracle. I would like to know the steps how to import data from excel or csv files to Oracle table.
Let say I already have table inside the Oracle. Then my user give me the sets of data inside the Excel Worksheet.
So, how can I import the excel data into Oracle table.
Thank you in advance.
cheers,
shima

Even easier. Download JDeveloper 11G from this site.
Set up the database connection, right click on the table, select Import->Excel and specify your file to load it. On the import pop-up, you must view and update each tab indicating Columns, Data Types, and DML.
Columns -- move the selected columns that you want to load to the box on the right
Data Types -- select column name from second column to which the data for each column of the import file should load
DML -- click this tab to generate the INSERT SQL
Once done click 'Insert'

What is a cube? how we store data in that? how we fetch data from cube?

Hi,
What is a cube? how we store data in that? how we fetch data from cube?
Regards.
venkat

>
venkey B wrote:
> Hi,
>
>
> What is a cube? how we store data in that? how we fetch data from cube?
>
>
> Regards.
>
> venkat
Hi Venkat,
I guess you mean an infocube from the SAP BI product. I propose to look at the forum for Business Intelligence to find your answers.
E.g. SAP POS DM writes the sales data in infocubes.....

How to Fetch Data From Standard Table MARA and Display using BOPF ?

Hello All,
In BOPF creation of Quey to a node fetches data from the Data Base Table attached to that Node,
But in my requirement I have to fetch data Present in a Standard table and Display it in the FPM List Using FBI.
** Can we Fetch the data From Standard Table and fill the Node in BOPF, Is this possible as the standard Table do not contain KEY field which BOPF uses for Data Fetching ?
Kindly share your Idea's .
Thanks in Adv.

Hi Dhivya,
Thanks For your Response.
In my Requirement I want to make ROOT Node as Transient Node.
When I create a Sub Node to a Root Node, I am able to get this option to make this sub node as a Transient Node .
By selecting 'Standard<-->Extended' option in the Menu item 'GoTo' I am able to get this Transient Node check box field for the Sub Nodes.
I want to make a ROOT Node as a Transient Node.
(Which Version you are using, and which transaction you are using to create BO . we are using BOBX Transaction, Version Ehp 6 )
Kindly Guide me .
Thanks,
Kranthi Kumar.

How to insert data from different internal table into a data base table

hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)

REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work.

How to fetch data from single database table using 2 internal tables.

Hi friends,
i am a new user of ABAP and also SDN.
i need a help.
i want to fetch data from one database table based on primary keys of 2 internal tables. how to put in where clause.
Thanks in advance.

hii
refer to following code ..i hope it will help you
SELECT matnr                         " Material Number
    FROM mara
    INTO TABLE i_mara
   WHERE matnr IN s_matnr.
IF i_mara[] IS NOT INITIAL.
    SELECT matnr                       " Material Number
           werks                       " Plants
           prctr                       " Profit Center
      FROM marc
      INTO TABLE i_marc
       FOR ALL ENTRIES IN i_mara
     WHERE matnr = i_mara-matnr
       AND werks IN s_werks.
ENDIF.                               " IF i_mara[] IS NOT INITIAL
i_output = i_marc.
IF i_marc[] IS NOT INITIAL.
    SELECT matnr                       " Material Number
           werks                       " Plants
           lgort                       " Storage Location
      FROM mard
      INTO TABLE i_mard
       FOR ALL ENTRIES IN i_marc
     WHERE matnr EQ i_marc-matnr
       AND werks EQ i_marc-werks
       AND lgort IN s_lgort.
ENDIF.                               " IF i_mara[] IS NOT INITIAL
regards
twinkal

How to fetch data from different standard table to own customize table.

Similar Messages

Maybe you are looking for