How to Fetch F1 help documentation

hi gurus,
Is there any Func module to fetch F1 help documentation for given standard table.
I want to take all the F1 help documentation for all fields(Prgname,SQLX,...) given in standard table say TRDIR.
Is there any shortcut to take this documentation text.
Suggestion please.
Regards
Ambichan,

Hi Prince,
Use FM <b>DYN_FIELD_F1_HELP</b>
Pass table name and field name . u will get f1 help documentation.
Reward points if helpful.
Regards,
Hemant

Similar Messages

How to fetching F4 help settings

Hello All ,
I need to fetch the F4 help settings done using the menu option : Help -> Settings -> F4 help.
I need to check whether the checkbox for the following option is set.
"Appears directly on the screen
This option changes the behavior of the F4 help if there is only one hit for a search.
If you choose this option, the values found are immediately returned to the screen if exactly one hit is found for the search criteria. The single hit is not displayed in a hit list."
Regards,
Parveen

Hai parveen
check the following code
DATA: T_FIELD LIKE DFIES OCCURS 0 WITH HEADER LINE,
      T_RETURN LIKE DDSHRETVAL OCCURS 0 WITH HEADER LINE,
      L_RETFIELD TYPE DFIES-FIELDNAME.
CLEAR CABNT.
SELECT ATINN INTO CABNT-ATINN UP TO 1 ROWS FROM CABNT
WHERE ATBEZ = CHARACTERISTIC_IN.
ENDSELECT.
CHECK SY-SUBRC = 0.
    REFRESH: T_FIELD,
           T_VALUETAB.
MOVE: 'AUSP'           TO T_FIELD-TABNAME,
        'ATWRT'          TO T_FIELD-FIELDNAME.
APPEND T_FIELD.
CLEAR T_FIELD.
CLEAR CAWN.
SELECT ATWRT INTO T_VALUETAB-VAL FROM CAWN
WHERE ATINN = CABNT-ATINN.
    APPEND T_VALUETAB.
ENDSELECT.
L_RETFIELD = 'ATWRT'.
     CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          RETFIELD               = L_RETFIELD
        TABLES
          VALUE_TAB              = T_VALUETAB
         FIELD_TAB               = T_FIELD
         RETURN_TAB              = T_RETURN
       EXCEPTIONS
         PARAMETER_ERROR        = 1
         NO_VALUES_FOUND        = 2
         OTHERS                 = 3
READ TABLE T_RETURN INDEX 1.
IF SY-SUBRC = 0.
D_VALUE = T_RETURN-FIELDNAME.
ELSE.
CLEAR D_VALUE.
ENDIF.

How to connect help documentation to planning layout in bps

Hi all,
I have several planing folders (transaction upspl\upspm). I want to create help documentation that will appear after press f1 or other way. What should I do?
Regards,
Veronika.

Thank you , but I'd like to show help within planing folder, in planing layout.
When I press f1 or icon ? in my layout the system writes me "the documentation is absent". How can I add the documentation?
Thank you a lot.
Regards,
Veronika.

My help documentation changed to japanese (sometimes german), and I can't read my help documentation to know how to set it back!

Just downloaded Logic Pro X, and at some point while using it, my documentation changed language. It was both around the time that my additional content finished downloading, and also around the time I first switched into advanced view. (No further switching has effected any change.)
When I search help, in english, the results turn up in german (presumably the latin character search has few results in the japanese character set). Nothing in english, making me think somehow the english language help doc got corrupted, or some such thing? Anyhow, would be nice to know how to change the language preference, in case it's just a setting. (Or where to download new help documentation)
My interface is still all in english, so it's just the much-needed help documentation that's inaccessible!
Ty for any help.

Bizarre, but good to know it's not just me. Ty very much.
For the record, I went back through logs and was able to see when it first appeared as the wrong language (when "logic pro x help" became "logic pro x hilfe" in the helpviewer log)
The only other logic related messages around that time (about 30 sec before) that I see are a string of about 10 messages in a row saying essentially (specific file mentioned different in each message)
"3/5/2014 9:17:33.804 AM mdworker[30170]: (Normal) Import: Using too many resources after 1984 files (wired: 0 resident: 33785 swapped: 0 regions: 2071), hit usage threshold importing /Library/Application Support/Logic/EXS Factory Samples/Glass Marimba, exiting to clean up now."
No idea if or how this could be relevant, but I thought I'd share it, in case it gave anyone an idea of what the problem is.
Regardless, ty very much for the help! That will work just fine for me.

SQL batch doesn't work; How to fetch related objects with fetch group?

I have two questions:
1. SQL Batch doesn't seem to work. I have tested some batch object creation
with BatchLimit set to -1, 0, 1, 25, 100. They all have similar
performance.
kodo.jdbc.DBDictionary: BatchLimit=25
2. How to use custom fetch group to fetch related objects? The example of
custom fetch group only show how to fetch different attributes in different
groups. I have a test cases where I would like to pre-fetch related objects
to save round trip.
Enviroments:
* Kodo 3.1.0 RC1
* Oracle 9i release 1
Thanks for any help!
Qingshan Luo
Senior Software Engineer
Open Harbor
1123 Industrial Road
San Carlos, CA 94070
Phone: 650-413-4251
Fax: 650-413-4298

try poracle 10g driver. At least they fixed terrible CLOB bug may be batch
to. BTW 9.2.x has problem with batching with deferred constraints so be
careful
"Greg Campbell" <[email protected]> wrote in message
news:c3dmnu$rmj$[email protected]..
>
"Qingshan Luo" <[email protected]> wrote in message
news:c3dg7q$mdl$[email protected]..
Hi,
I have two technical questions with Kodo.
1. SQL Batch doesn't seem to work. I have tried batch size of -1, 0, 1,25.
But the performance from batch creating objects is not affected by batch
size.
kodo.jdbc.DBDictionary: BatchLimit=25You may be running into a bug in the Oracle 9.2 driver. That driverdoesn't
reliably give update counts when using batching and prepared statement
caching. By default, Kodo will turn off batching. You can manuallyenable
batching by setting the BatchLimit on your DBDictionary, as you've done.If
you do this, though, you may want to turn off prepared statement cachingby
setting MaxCachedStatements to 0 (see
http://www.solarmetric.com/Software/Documentation/3.1.0RC1/docs/ref_guide_dbsetup.html#ref_guide_dbsetup_builtin).
>
2. How to use custom fetch groups to eagerly fetch related persistable
objects? Example only showed attributes, not relationships.You can find information on setting up eager fetching of relations at
http://www.solarmetric.com/Software/Documentation/3.0.3/docs/ref_guide_
perfpack_eager.html
Basically, you'll need to add the relations to your fetch group, and
set the eager fetching mode.
Enviroment:
* Kodo 3.1.0 RC1
* Oracle 9i release 1.
Qingshan Luo
Senior Software Engineer
Open Harbor
1123 Industrial Road
San Carlos, CA 94070
Phone: 650-413-4251
Fax: 650-413-4298

How to link Value Helps in Visual Composer?

I would like to know, how to link value helps in VC...??? It's like.....after selecting a value from Value Help 1, how do i restrict my Value Help 2 values so that it contains the values that are relevant to the value selected from Value Help 1 only....???? Request you to please provide the solution.......

Hi Christophe
Thanks so much for your help. I have been trying to do the way that you have suggested but am unsuccessfull...... Can you please tell me as to where should I create a field in the second popup view...??? After I double click on the link between "Start" and the "BAPI" in the second popup view...... , I find no "+" symbol in the "Configure Element Panel" using which I can add the value taken from the first popup view.....
Is there any pdf file or documentation that shows as to how to do this process...????
Waiting for your response..... Thanks for your suggestion.....
Regards
Deepak Jaju

How to fetch year till date value for earning for current ,last and year

hi,
how to fetch year till date value for earning for current ,last and year before that from payroll result
plz reply soon,
pratyush

Dear Pratyush,
Pick this from CRT.
Use LDB PNPCE & Fire event GET PAYROLL &
then you can pick from CRT.
Hope this helps.
Kindly reward in case useful.
Regards & Thanks,
Darshan Mulmule

How to fetch data from different sources into one source (like into Ztable)

hi friends,
As per our client requirements they want to develope an Inventory and an Ontime delivery report in BO on top of Oracle database.
Situation is some thing like they have ECC 6.0.and they want to collect all inventory and ontime delivery data at one place.According to me that could be one Ztable in which we can gather all data.Apart from that they are going to use Data Integrator in which they can directly fetch the data from R/3 system(They dont want to have BI system) and put all data in Oracle DB.On top of ORacle BO person can develop BO reports.
My question is how to fetch all data at one place and what are the tables going to be use.
kindly help me out as its very important project.
Thanks
Abhishek

The following is my standard reply to those who need to get old data from a backup in one account and add it to another account. The method described here may be applied to your case. It would be a bit of a long process, though.
When connected to the account you want to GET data from, Go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off.
When prompted choose to keep the data on the iPhone.
After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account.
Note that this only affects the "Apple data" like contacts, calendars, reminders, etc. Many third party apps also use iCloud to store data files there. These files may be lost in the process, unless the apps also keep the data locally on the device.
NOTE: Photos in the photo stream (if you use it) will not transfer to the new account. It is advised that you save the photos to a computer before performing the account switch.

How to get f4 help in alv grid in container-urgent

hi,
how to get f4 help in alv grid in container using abap objects
ganesh

Hi Ganesh,
Did you have a look at sample report BCALV_TEST_GRID_F4_HELP ?
Here is part of the header documentation:
*& Report BCALV_GRID_F4_HELP *
Purpose:
~~~~~~~~
This report illustrates the use of f4-Help in an alv grid control.
Background:
~~~~~~~~~~~
There a two possibilities to implement an f4-Help in the alv grid
control: one can either use standard f4-help or write one by Hand.
For the former there is nothing to do at all. This report shows how
to implement user-defined f4-help.
I am sure you will find within this report the solution you are looking for.
Reward points if this Helps.
Manish

How to fetch some certain records at a time

Hi everyone,
I dont know how to fetch some records at a time,
for some reason,there is not enouht memory.so I cant
fethch all the records at a time.
example, every time I only want to fetch 10
records. Does anyone know that?
thanks
Krussi

I think you may be getting setFetchSize(int) and setMaxRows(int) confused. I may have added to the confusion with my breaking out of the loop comment.
setFetchSize(int) gives the driver a hint as to how many rows it should store in memory at a time internally, ie. within the driver. It has no real effect on how you write your program at all. Its only purpose is to limit memory usage by the driver. To limit the rows returned, use setMaxRows.
For example, assume a result set has 20 rows and you use:
rs.setFetchSize(5);
while (rs.next()) {
System.out.println("Rows: " + (++count));
} You still get a count from 1 to 20. However, internally the driver is only holding in memory 5 records at a time, after the 5 returned it will discard those and get the next 5. So instead of holding 20 rows, its only holding 5 at a time. If you change rs.setFetchSize(5) to rs.setMaxRows(5) you will only get a count from 1 to 5, the rest are silently discared and rs.next() returns false.
Check your documentation to see if your driver supports the method. I believe many drivers don't. If not, I believe there is no way around multiple queries. Even if there is no rowid, as long as you order your queries you should be able to start again where you left off.
Disclaimer: Both drivers I commonly use do not implement setFetchSize(int). Someone let me know if I've fudged something here.
Good Luck

How to fetch data for the Change Request in PROCESS_EVENT

Hi All,
I need to write some custom logic on Save/Submit button. For this I am planning to enhance the PROCESS_EVENT method of class CL_USMD_CR_MASTER. Within this method I need to access runtime data of the change request currently being processed.
I am going to create a post-method exit for this PROCESS_EVENT method. Is this correct?
I have heard we have APIs in MDG which can be used to fetch data, however I do not know how to use the same.
Can someone please help me with sample code how to fetch the runtime data of the Change Request
Thanks in advance.
Regards,
Vanessa

What MDG domain are you working on? What you are trying to do is called "reuse mode" enhancement and you do NOT want to tinker with the FPM feeder classes in this case. SCN document Configuration and Enhancement of SAP Master Data Governance contains many examples on how to achieve this.
This is a how-to document for MDG-M reuse mode enhancement: Extend MDG-M Data Model by a New Entity Type (Reuse Option)
This is a how-to document for MDG-C/S reuse mode enhancement: SAP How-To Guide: Extend the MDG Business Partner - Node Extension (Reuse Option)
Keep in mind, these examples are mainly for additional "master data" fields. If you need additional fields that are not master data but are more related to the Change Request itself, you should use this how-to document: Enhancement of the User Interface Building Block for Change Requests
Again, all of these documents can be found on the first document I referenced above. I suggest that you bookmark it.

How to dynamic order of groups & How to fetch data at runtime from database

Post Author: ferikpatel
CA Forum: Formula
I am using visual studio .net application having inbuilt crystal report feature. Now, what I want to do is, i have create 5 groups in crystal report, but dynamically want to change the order of those reports as per user's selection.
How to do that?
Also, how to fetch database item on runtime which is not selected through data expert as its relation is depends on situation. Say if one field's value is 5 than i want to get name of customer, but if same field's value is 6 than i want to get name of suppliers. In database both supplier and customers tables are different however they are connected with base table.
I'm bit new in crystal report. Please help me out if it is possible.

Post Author: Charliy
CA Forum: Formula
You don't actually change the order of the groups. You group on a formula and change contents of the formula based on the parameter.
IF {?Group1} = "Manager" then {table.Manager}
else if {?Group1} = "Invoice Date" then Totext({table.InvDate},"yyyyMMdd") note all options must be the same date type, so numbers and dates are converted
else . . .

How to fetch the data & display the data if fields got the same name in alv

hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028

Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

How to fetch data into my custom script configured in qc02 transaction

Hi All,
I configured the custom SAP-Script in place of standard script name in QC02 tcode.In my requirement when I execute QC22
transaction the custom script will be triggered along with some data based on material number,batch number and plant.I need to fetch QALS-KTEXTMAT , QALS-CHARG, MCH1-HSDAT and MCH1-VFDAT.Please help me how to fetch this data.Any Enahancement need to use or any spot is there Please specify.
Thanks in advance.
Regards,
Satya.
Edited by: satyareddygade on Sep 8, 2011 2:13 PM

Hi Satya,
Try like this in your Script window text element.
/: PERFORM FETCH_KTEXTMAT IN PROGRAM <Z Subroutine Pool program>
/: USING &QALS-PRUEFLOS&
/: CHANGING &GV_KTEXTMAT&
/: ENDPERFORM
in Z Subroutine Pool program
FORM fetch_ktextmat TABLES intab STRUCTURE itcsy
                            outtab STRUCTURE itcsy.
DATA:
    lv_prueflos TYPE qals-prueflos,
    lv_ktextmat TYPE qals-ktextmat.
*---Get Inspection Lot Number
READ TABLE intab WITH KEY 'QALS-PRUEFLOS'.
CHECK sy-subrc = 0.
lv_prueflos = intab-value.
SELECT SINGLE ktextmat FROM qals INTO lv_ktextmat WHERE prueflos EQ lv_prueflos.
outtab-value = lv_ktextmat.
MODIFY outtab FROM outtab TRANSPORTING value WHERE
name = 'GV_KTEXTMAT'.
CLEAR : intab,outtab.
ENDFORM.                    "FETCH_KTEXTMAT
/: PERFORM FETCH_HSDAT IN PROGRAM <Z Subroutine Pool program>
/: USING &*VBDPL-MATNR&
/: USING &VBDPL-CHARG&
/: CHANGING &GV_HSDAT&
FORM fetch_hsdat TABLES intab STRUCTURE itcsy
                            outtab STRUCTURE itcsy.
DATA:
    lv_matnr TYPE vbdpl-matnr,
    lv_charg TYPE vbdpl-charg,
    lv_hsdat TYPE mch1-hsdat.
*---Get Material Number
READ TABLE intab WITH KEY '*VBDPL-MATNR'.
CHECK sy-subrc = 0.
lv_matnr = intab-value.
*---Get Batch Number
READ TABLE intab WITH KEY 'VBDPL-CHARG'.
CHECK sy-subrc = 0.
lv_charg = intab-value.
SELECT SINGLE hsdat FROM mch1 INTO lv_hsdat WHERE matnr EQ lv_matnr
                                                AND charg EQ lv_charg.
outtab-value = lv_hsdat.
MODIFY outtab FROM outtab TRANSPORTING value WHERE
name = 'GV_HSDAT'.
CLEAR : intab,outtab.
ENDFORM.                    "FETCH_HSDAT
Use the following program symbols where you want to print.
&GV_KTEXTMAT& &QALS-CHARG& &GV_HSDAT& and &MCH1-VFDAT&
Regards,
Surya.

How to Fetch F1 help documentation

Similar Messages

Maybe you are looking for