How to connect help documentation to planning layout in bps

Hi all,
I have several planing folders (transaction upspl\upspm). I want to create help documentation that will appear after press f1 or other way. What should I do?
Regards,
Veronika.

Thank you , but I'd like to show help within planing folder, in planing layout.
When I press f1 or icon ? in my layout the system writes me "the documentation is absent". How can I add the documentation?
Thank you a lot.
Regards,
Veronika.

Similar Messages

To Identify changed data in planning layout in BPS

We have a planning layout in BPS which user can change data on individual cell. We also have an EXIT function to distribute data to this layout.
User changes data on cells then executes the EXIT function to distribute data. During debugging, we see the changed entry with delta amount in the XTH_DATA table. However, there are many entries with similar characteristics; hence we cannot identify the particular changed data, i.e., the changed sales amount, in XTH_DATA of EXIT function.
Is there any configuration and/or function to show only the changes data? Any comments/hints are greatly appreciated.
Best regards,
Sam

Hi,
When you enter for a particular characteristic and remaining characteristic if you left bank , it will store as # in layout and samething will also in cube. you can check it cube also.
for eg.
profitcenter com.code sales revenue
100 # 10
if you want to avoid this then you have to enter all characteristic values.
Regards,
Siva.

How to add help documentation in a module pool screen?

Hi ,
I have to add documentation for a module pool screen. I have added the documentation for the program in se38 but what can I do to make it visible on the screen I have designed.
Since I am new to module pool, kindly explain me step by step.
Thanks,
Nidhi

Hello Nidhi,
if you want at field level you use
PROCESS ON HELP-REQUEST. in flow logic of screen.
one mre thing you can add one text edit control on screen and put your text in screen

How to Clear Buffer after Executed Planning Function in BPS

Hi BW-BPS Experts,
I am BPS novice.We are executing Work Packages through planning folders. In Planning Folder we have 3 planning functions.Among those 3 , 2 Planning fns executed successfully, while executing 3rd one , it given error msg. So how can I clear the values in Buffer which r executed by first 2 planning fns. I haven' t saved any values to Cube. But I need to process these planning fns again.
I will appreciate if any body can let me know how can I process these planning functions again without disturbing.
I did From Menu Edit -> Undo Planning function. It give the msg: Last planning function was undone.How can I undo all Planning functions?
Its Production systyem.So pls advise me.
Points will be awarded.
Thanks,
Abhi.

Hi Abhi,
There are 2 transactions which might help you.
1. /$obj - resets object buffers
2. /$sync - resets all buffers
I would sugest that you study the impact on the data in buffer as many users might be in the system using BPS. If there is no risk to your business process you can use the above transactions.
Sunil

How to hide a data column in a planning Layout

Hi experts,
we use BW-BPS and I need some datacolums in planning layout, which should be calculated.
Rest Volume = Forecast - Actual
The customer wants to see only the "Rest Volume".
But i need for calculation Forecast and Actual values, which are available in Infocube.
Do you know how to hide some colums in planning layout ?
thanks a lot.

Write a one line macro in SAPAfterDataPut sub module and check the option in the tab MS Excel Settings in the last screen of the layout.
Sample macro:
suppose the column you want to hide is 4.
columns(4).hidden = true

I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

Hi All, please help me...Real time cube planning layout creation...

Hi All,
Could you help me on below process please.
Iam working with BI7.0. I have real time cube (daily sales) and user need to access and update/add records accordingly.
So for this real time cube I have to create planning layout with the data. User can see that data and update/add.
I dont how to create planning layout (i heared that rsplan) how to show the data.
Also I need some help on ABAP, I need to map some fields from a table.
Actually from a flat file iam uploading data into ODS. In ODS has 3 more extra infoObjects.
Ex: Shopping mall code, tenent number and outlet number info i have to pick contract number from table with routine and pass that contact number into ODS one field. It means Contact number will not come from flat file, thats what need table and routine.
So for that I have to create one table (SE11) with all the information. and i have write routine.
I have to read flat file 2 fields( like A and B) and check the value in a table and get the value C and put into ODS one field. I have to do this with routines.
In the table have A, B and C values. Table also I have to create. so also please can u tell me some steps.
Could you please help on this. Also with process chains for this.
Thanks in advance!
anil

Hi Anil,
If you go to RSPLAN there you can go to Portal link (it must be configured properly in system)
In portal there will be wizard where you can easily go step by step and create planning functions and sequences like below:
       1.      You choose the appropriate InfoProvider.
       2.      You create one or more aggregation levels.
       3.      You create one or more filters.
       4.      You create one or more planning functions.
       5.      You create a planning sequence.
       6.      You test the planning model.
which is clearly explained in below link
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d2440301a06f4e10000000a422035/frameset.htm
after doing this you can create a query on aggregates you have created above and then make query input ready i.e planning enabled for keyfigures you want like mentioned in below link:
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm
then you can run query in Analyzer and save it as a work book after proper drilldown which can be used as template.
Hope you understood basic thing, as you going on doing u will know clearly every thing.
Ravi

Please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

How to view the input and output layouts created in the planning folder?

Hi all,
How to view the input and output layouts created in the planning folder in the bw 3.5?
Thanks
Pooja

Hi,
You can refer to this link. How to create planning folder and executing the planning folder.
http://help.sap.com/saphelp_nw04/Helpdata/EN/5d/7c4b52691011d4b2f00050dadfb23f/frameset.htm
Hope this helps

Issue with creation of custom layouts using SAP Help Documentation

Hi Experts,
My requirement is to create a home custom page layout (using web dynpro) in Composite Environment. The default options available in CE are not useful for me. I set out to make a custom layout using the following this SAP Help Documentation: [ Creating a Web Dynpro Page Layout (SAP Library - Using the Portal as a Frontend)|https://cw.sdn.sap.com/cw/docs/DOC-102846]
I have followed the instructions and followed all the steps, yet I fail to see the application in CE. The custom page layout is not displayed neither in options and is not available any where.
Please let me know if anybody followed these steps and have got any success.
Thanks in advance
Srikant

Hi
Can somebody let me know if they have implemented a customised solution of creation of page layouts using Web Dynpro - as per the steps suggested by SAP.
Thanks in advance
Srikant

My ipad 3 is frozen on the plug into itunes page. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (there is no usb port on an ipad). If anyone could help it would be appreciated.

My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.

I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
iPad User Guide for iOS 6
iPad User Guide for iOS 7

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help, thanks.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks

Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!!

Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!! I don't have a credit card nor do they gove debit cards to foreigners here, or at least it's really hard so I'm using my bank at home and still have a debit there. My phone number is 8 numbers plus the country code which is strange! Another thing is I was given a phone email that I was told to use for texting but I'm not sure how that works!! It's so frustrating too because no one speaks English here and I'm not very tech savvy. God bless you if you can help :)

whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
If you are in japan, you need to use the japan app store

Help how to connecting Oracle SQL Developer 3.0 with Oracle Database 11g

Hello,
I'm new in oracle developer yesterday i setup in my laptop database 11g the last version (11.2.0.1.0), well i follow steps still i got succeed to install, and i got my local host URL and i test my user name and password work very well, my problem now is i try to connect database 11g using Oracle SQL Developer 3.0 (3.0.04.34) but always filed and with my little experience i don't know where the wrong. as i said i test database after finish install is work fine the my URL is https://Ahmed-HP:1158/em and i test my username and password that i already set before is enter normal in my local database, please i need help to know how i connect database with Oracle SQL Developer 3.0 (3.0.04.34).
Thanks,

885173 wrote:
EdStevens, thanks for your quick answer, sorry for my explain was doesn't clear, i open oracle sql developer and choose new connection i set connection name system_orcl username:system password:*i set my password that i create when i setup database*
-Now the link that i got after finish install database is https://Ahmed-HP:1158/em so i have question about this point Hostname and port if the link to access database is this https://Ahmed-HP:1158/em so this mean i typing at Hostname:localhost and port:1158 ?
because the message when i test connection always is filed and I'm sure i typing username and password and SID:orcl as i set when install database.port 1158 is what the dbcontrol (Oracle Enterprise Manager) is listening on. OEM is NOT the database. As far as the database is concerned, OEM is "just another client".
Actually, the database doesn't listen for requests on any port. There is another process, the "listener" that listens for requests to connect to the database. Typically, it listens on port 1521. You should have a tnsnames.ora file set up to resolve a connection request to the correct host. You can read more on this at http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/

How to implemented Planning Layout for other plan

Hi,
I have one planning layout for X plant now I want to use same layout for anothr plant. Can I copy the same layout for another plant...? If yes pleast let me know the step with tr.code.
In this senario what I have to copy Planning area, Level or layout...?
Your help will be highly appreciated. I will assign full mark.
Regards
Manoj

Hello,
Why don't use restrict your layout by a variable based on the plant? This variable could for instance be put on the planning level.
Then just add this variable in your planning application via UPSPM.
The variable can be an authorization variable, exit variable, user specific variable...
Rgds,

How to connect help documentation to planning layout in bps

Similar Messages

Maybe you are looking for