How to fetch the required record into the cache

Dear sirs...
An application written in Jdeveloper 10g 10.1.2.1 that uses ADF. It is requred to process some records. When i get the view object & try to go to the first record i get the following error:
05/11/30 23:13:26 Error Message:JBO-25046: Requested row not available in row set iterator FilesView1.
oracle.jbo.RowNotAvailableException: JBO-25046: Requested row not available in row set iterator FilesView1.
     at oracle.jbo.client.remote.RowSetIteratorImpl.first(RowSetIteratorImpl.java:851)
     at oracle.jbo.client.remote.RowSetImpl.first(RowSetImpl.java)
     at oracle.jbo.client.remote.ViewUsageImpl.first(ViewUsageImpl.java)
     at oracle.jbo.common.ws.WSRowSetIteratorBase.first(WSRowSetIteratorBase.java:328)
     at view.ViewmailAction.onDelete(ViewmailAction.java:80)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java)
     at oracle.adf.controller.lifecycle.PageLifecycle.handleEvent(PageLifecycle.java:544)
     at oracle.adf.controller.struts.actions.StrutsPageLifecycle.handleEvent(StrutsPageLifecycle.java:252)
     at oracle.adf.controller.struts.actions.StrutsUixLifecycle.handleEvent(StrutsUixLifecycle.java:249)
     at oracle.adf.controller.lifecycle.PageLifecycle.processComponentEvents(PageLifecycle.java:477)
     at oracle.adf.controller.struts.actions.StrutsUixLifecycle.processComponentEvents(StrutsUixLifecycle.java:162)
     at oracle.adf.controller.struts.actions.DataAction.processComponentEvents(DataAction.java:236)
     at oracle.adf.controller.struts.actions.DataAction.processComponentEvents(DataAction.java:430)
     at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:126)
     at oracle.adf.controller.struts.actions.StrutsUixLifecycle.handleLifecycle(StrutsUixLifecycle.java:70)
     at oracle.adf.controller.struts.actions.DataAction.handleLifecycle(DataAction.java:223)
     at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:155)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:509)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:239)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
How can I fetch the first row into the cache?
I checked the documentation & it says i should call the required API to put the record into the cache & then retry the operation, so what is this API? what should i do?
Thanks alot for any help
best regards

I'd recommend processing the records inside a custom method on your application module. This is a best practice whever you can do it, and it makes your application easier to maintain and test.
I'd also recommend using Immediate Mode instead of Batch Mode. Please see this article on the subject:
http://www.oracle.com/technology/products/jdev/tips/muench/batchmode/index.html

Similar Messages

How to write the JTables Content into the CSV File.

Hi Friends
I managed to write the Database records into the CSV Files. Now i would like to add the JTables contend into the CSV Files.
I just add the Code which Used to write the Database records into the CSV Files.
void exportApi()throws Exception
          try
               PrintWriter writing= new PrintWriter(new FileWriter("Report.csv"));
               System.out.println("Connected");
               stexport=conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE);
               rsexport=stexport.executeQuery("Select * from IssuedBook ");
               ResultSetMetaData md = rsexport.getMetaData();
               int columns = md.getColumnCount();
               String fieldNames[]={"No","Name","Author","Date","Id","Issued","Return"};
               //write fields names
               String rec = "";
               for (int i=0; i < fieldNames.length; i++)
                    rec +='\"'+fieldNames[i]+'\"';
                    rec+=",";
               if (rec.endsWith(",")) rec=rec.substring(0, (rec.length()-1));
               writing.println(rec);
               //write values from result set to file
                rsexport.beforeFirst();
               while(rsexport.next())
                    rec = "";
                     for (int i=1; i < (columns+1); i++)
                         try
                                rec +="\""+rsexport.getString(i)+"\",";
                                rec +="\""+rsexport.getInt(i)+"\",";
                         catch(SQLException sqle)
                              // I would add this System.out.println("Exception in retrieval in for loop:\n"+sqle);
                     if (rec.endsWith(",")) rec=rec.substring(0,(rec.length()-1));
                    writing.println(rec);
               writing.close();
     }With this Same code how to Write the JTable content into the CSV Files.
Please tell me how to implement this.
Thank you for your Service
Jofin

Hi Friends
I just modified my code and tried according to your suggestion. But here it does not print the records inside CSV File. But when i use ResultSet it prints the Records inside the CSV. Now i want to Display only the JTable content.
I am posting my code here. Please run this code and find the Report.csv file in your current Directory. and please help me to come out of this Problem.
import javax.swing.*;
import java.util.*;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.table.*;
public class Exporting extends JDialog implements ActionListener
     private JRadioButton rby,rbn,rbr,rbnore,rbnorest;
     private ButtonGroup bg;
     private JPanel exportpanel;
     private JButton btnExpots;
     FileReader reading=null;
     FileWriter writing=null;
     JTable table;
     JScrollPane scroll;
     public Exporting()throws Exception
          setSize(550,450);
          setTitle("Export Results");
          this.setLocation(100,100);
          String Heading[]={"BOOK ID","NAME","AUTHOR","PRICE"};
          String records[][]={{"B0201","JAVA PROGRAMING","JAMES","1234.00"},
                           {"B0202","SERVLET PROGRAMING","GOSLIN","1425.00"},
                           {"B0203","PHP DEVELOPMENT","SUNITHA","123"},
                           {"B0204","PRIAM","SELVI","1354"},
                           {"B0205","JAVA PROGRAMING","JAMES","1234.00"},
                           {"B0206","SERVLET PROGRAMING","GOSLIN","1425.00"},
                           {"B0207","PHP DEVELOPMENT","SUNITHA","123"},
                           {"B0208","PRIAM","SELVI","1354"}};
          btnExpots= new JButton("Export");
          btnExpots.addActionListener(this);
          btnExpots.setBounds(140,200,60,25);
          table = new JTable();
          scroll=new JScrollPane(table);
          ((DefaultTableModel)table.getModel()).setDataVector(records,Heading);
          System.out.println(table.getModel());
          exportpanel= new JPanel();
          exportpanel.add(btnExpots,BorderLayout.SOUTH);
          exportpanel.add(scroll);
          getContentPane().add(exportpanel);
          setVisible(true);
      public void actionPerformed(ActionEvent ae)
          Object obj=ae.getSource();
          try {
          PrintWriter writing= new PrintWriter(new FileWriter("Report.csv"));
          if(obj==btnExpots)
               for(int row=0;row<table.getRowCount();++row)
                         for(int col=0;col<table.getColumnCount();++col)
                              Object ob=table.getValueAt(row,col);
                              //exportApi(ob);
                              System.out.println(ob);
                              System.out.println("Connected");
                              String fieldNames[]={"BOOK ID","NAME","AUTHOR","PRICE"};
                              String rec = "";
                              for (int i=0; i <fieldNames.length; i++)
                                   rec +='\"'+fieldNames[i]+'\"';
                                   rec+=",";
                              if (rec.endsWith(",")) rec=rec.substring(0, (rec.length()-1));
                              writing.println(rec);
                              //write values from result set to file
                               rec +="\""+ob+"\",";
                               if (rec.endsWith(",")) rec=rec.substring(0,(rec.length()-1));
                               writing.println(rec);
                               writing.close();
     catch(Exception ex)
          ex.printStackTrace();
     public static void main(String arg[]) throws Exception
          Exporting ex= new Exporting();
}Could anyone Please modify my code and help me out.
Thank you for your service
Cheers
Jofin

How to copy the table1selected records into table 2 in webdynpro java.

Hi
how to copy the table1selected records into table 2 in webdynpro java.
venkat
Edited by: venkatpvr on Sep 23, 2011 11:53 AM

Hi Venkat,
You have 2 Value Nodes one for Table1 and second for Table2.
Table1 node having one more Value Attribute i.e check Box data type is Boolean. Now you are requirement are select records from Table1 Node and click on One Method that records will moves to Second Table2 Node.
Create One Method for getting the Records from 1-Table to 2-Table
CopytoTable2 ()
In this method you have to write code like this
If (wdContext.nodeTable1.Checkbox(true))
If(1. Check the Table1 Value Node Size()>0)
Get the Table1 records and set to table2 Value node.
Else
Please select check box// Error message
Hope this helps!!
Regards
Vijay K

Split the incoming records into partitions

Guru's,
I have a table with around 17,000 records each day to get processed through informatica. All these records are distinct in every attribute and the status of the records will be in 'PENDING_CLEAR'.
My requirement is to read these records into 8 partitions (if possible equal partitions) so that i could run in 8 partitions in informatica.
I have the below options available in informatica
1. Pass through
2. Key range and
3. Database partioning.
Option 2 and Option 3 are not possible, since the data base is not partitioned and i will not be able to provide the key ranges, since the primary key on the table is an auto-increment number.
In pass through i will be reading the same 17000 records across all the pipelines and its a challenge to handle it in infomatica.
Any suggestions of paritioning the records using sql??
Thanks a lot for your time.

>
Yes. But the way informatica has got options to read and process the record it is complicating more. I am trying to sort the issue related to informatica.
>
And that reinforces what I said above: you are likely 'misusing' Informatica if you have that sort of problem.
A middle-tier application like Informatica does not provide a 'one size fits all' solution without making (in some cases serious) performance trade-offs.
Such tools function best when they act as the 'middle man' among multiple databases. Need to do some basic data manipulation and source data from both Oracle and DB2? A tool can access both DBs with separate connections and help you merge or filter the data. The tool can also assist in performing some basic data transformations.
Need to sort data and apply complex business rules? That work should be done in the database.
The primary goal, when working with multiple database sources or targets, is the do AS MUCH work as possible in the DB; that is what the DB is designed for.
Get the data INTO the DB as quickly and efficiently as possible and then do the work there. Mid-tier tools can be very effective at that. They can source data from multiple systems, do basic data cleansing and filtering to reject/fix/report 'dirty' data and they can consolidate multiple data streams to feed ONE target stream.
Tools such as informatica use a proprietary language and syntax. DBs like Oracle and DB2 base their syntax on well-established ANSI standards. There is NO comparison.
Versions of Informatica that I worked with didn't even allow you to access the code very easily. The code for individual businsess rules was locked into the objects it was attached to (some flexibility using maps and maplets). A developer has to 'open' the object in order to get access to the actual code that was being use.
The PL/SQL code used in DBs is readily accessible and easy to access.
The first question I would ask about your issue is: can this work (processing each record) be done in the database. If the answer is yes then that is most likely where the work should be being done. The 'tool' should then be used to do as much 'preprocessing' of the data as possible and then get the cleansed data into the database (into staging tables) as quickly as possible.
If you insist on going the way you are headed you will need to add code to 'chunk' the data.
See my reply if this thread for a description of how to use the NTILE function to do that
Re: 10g: parallel pipelined table func - distributing DISTINCT data sets
And for more discussion of why you should NOT be going this way here is a thread from last year with a question very similar to yours also using Informatica
Looking for suggestion on splitting the output based on rowid/any other
>
I have below query.I need to split total rows pulled by the query into two halves by maintaining data accuracy.
Eg if query returns 500 rows,i need a query which return 250 another with 250.
Reason :
I have a informatica ETL job which pull data by above query and updates into target.Run time is 2hrs
In order to reduce the run time,using 2 pass through partitions which will run the query in two partitions and run time will be reduced to exact 1 hour.
>
Sound familiar? Read what the responders (including me) had to say.

Best way to insert millions of records into the table

Hi,
Performance point of view, I am looking for the suggestion to choose best way to insert millions of records into the table.
Also guide me How to implement in easier way to make better performance.
Thanks,
Orahar.

Orahar wrote:
Its Distributed data. No. of clients and N no. of Transaction data fetching from the database based on the different conditions and insert into another transaction table which is like batch process.Sounds contradictory.
If the source data is already in the database, it is centralised.
In that case you ideally do not want the overhead of shipping that data to a client, the client processing it, and the client shipping the results back to the database to be stored (inserted).
It is must faster and more scalable for the client to instruct the database (via a stored proc or package) what to do, and that code (running on the database) to process the data.
For a stored proc, the same principle applies. It is faster for it to instruct the SQL engine what to do (via an INSERT..SELECT statement), then pulling the data from the SQL engine using a cursor fetch loop, and then pushing that data again to the SQL engine using an insert statement.
An INSERT..SELECT can also be done as a direct path insert. This introduces some limitations, but is faster than a normal insert.
If the data processing is too complex for an INSERT..SELECT, then pulling the data into PL/SQL, processing it there, and pushing it back into the database is the next best option. This should be done using bulk processing though in order to optimise the data transfer process between the PL/SQL and SQL engines.
Other performance considerations are the constraints on the insert table, the triggers, the indexes and so on. Make sure that data integrity is guaranteed (e.g. via PKs and FKs), and optimal (e.g. FKs should be indexes on the referenced table). Using triggers - well, that may not be the best approach (like for exampling using a trigger to assign a sequence value when it can be faster done in the insert SQL itself). Personally, I avoid using triggers - I rather have that code residing in a PL/SQL API for manipulating data in that table.
The type of table also plays a role. Make sure that the decision about the table structure, hashed, indexed, partitioned, etc, is the optimal one for the data structure that is to reside in that table.

After creating a new user account, how do I move my files into the new user?

I have an issue where my 'Desktop/Screensaver' prefs seem to be corrupt somehow. When I click on that icon in System Preferences, it stalls and I get the spinning ball, thus resulting in a force quit. After reading a Mac Format magazine where someone wrote in with a similar issue, they said to trash various prefs (did that and made no difference) and if that didn't work, try creating a New User account (therefore creating brand new system prefs) and move your stuff over.
Well, I've created the New User account, but I can't figure out how to move/copy my stuff into the user folders. After copying and attempting to move stuff in, I see folders with a red circle with a white line through it (like a 'no entry' sign).
Any clue as to how this can be done? All I'm trying to do is to reinstate the system prefs so they are not corrupt anymore on my log-in.

No. Not the main Library folder. Make absolutely sure you are in the Home Library folder and not the main Library folder.
Your Home Library folder is hidden in Lion. To get to it, in the Finder menu, select GO and hold the option key down. Select Library in the submenu. The Finder window will open in your Home Library. This is where your user prefs are stored.
Once there, you will see the Preferences folder. Open it up, select all items within it and move them to the trash. You will need to restart in order for the new Finder preferences to be recreated.
Once you restart, then you will be back to the default preferences to the system and all applications. And yes, it will affect all settings including your Dock, just as logging into a new user. You will have to reset everything there also.
If you wish to do a selective method, instead of deleting all preferences, try deleting the one associated with your problem. Screen saver problems should be affected by the system preferences, so try deleting this:
com.apple.systempreferences.plist
com.apple.systempreferences.plist.lockfile
Note that when you delete system file preferences, a restart will be required. For applications, just quit the application before trashing preference files.

Different methods involved in insertion of records into the table

hi all,
i am using Forms [32 Bit] Version 6.0.8.24.1 (Production)
Oracle Database 10g Release 10.2.0.1.0 - Production
i have parameters like emp_code(optional) and year(mandatory field-four digit year).
Based on the parameter i have to get the details from one table and those records should be inserted into other table along with additions columns(by hardcoding the additional columns).
To acheive this i am planning to get a cursor by selecting the necessay fields from the table passing the parameters in the where clause of the cursor.
by looping through the cursor i will insert the records into the other table.
here the thing is the data is going to be huge (since year is the parameter).
so is my approach leads to the performance issue.
i heard that there are different method of insetions,
can anybody suggest me the better way(peformance wise) other than what i have mentioned (if you are aware of)..
Thanks..

This is not really a Forms issue, so you'd better go to the sql and pl/sql forum. Here, this question has been asked many times: how do I insert large volumes of data in a table?
insert into ...
select ....
or CTAS (create table as select ....)
by looping through the cursor i will insert the records into the other table.That is really the worst idea. If you can do it in sql (insert into ... select ...) DON'T do it in pl/sql.

How to import an .csv file into the database?

and can we code the program in JSP to import the.csv file into the database.

It is better to use Java class to read the CSV file and store the contents in the database.
You can use JSP to upload the CSV file to the server if you want, but don't use it to perform database operations.
JSPs are good for displaying information on the front-end, and for displaying HTML forms, there are other technologies more suitable for the middle layer, back end and the database layer.
So break you application into
1) Front end - JSPs to display input html forms and to display data retrieved from the database.
2) Middle layer - Servlets and JavaBeans to interact with JSPs. The code that reads the CSV file to parse it's contents should be a Java Class in the middle layer. It makes use of Java File I/O
3) Database layer - Connects to the database using JDBC (Java Database Connectivity), and then writes to the database with SQL insert statements.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Keeping the above concepts in mind, first build a simple JSP and get it to work,
then research on Google , for Java File I/O , discover how to read a file,
Then search on how to readh a CSV file using Java.
After researching you should be able to read the CSV file line by line and store each line inside a Collection.
Then research on Google, on how to write to the database using JDBC
Write a simple program that inserts something to a dummy table in the database.
Then, read the data stored in the Collection, and write insert statements for each records in the collection.

How to find last inserted record in the table.

Version: Oracle 10g
I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
How to find last inserted record in the table "Manufacture".
As i come to know that Rowid is not result perfect results. Please provide your inputs.

user13416294 wrote:
Version: Oracle 10gThat is not a version. That is a product name. A version is 10.1.0.2 or 10.2.0.4, etc.
I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
How to find last inserted record in the table "Manufacture".Not possible as your data model does not cater for it. That simple.
If there is a need to determine some order or associate some time to an entity, then that should be part of the data model - and a relationship, or one or more attributes are needed to represent that information. Thus your data model in this case is unable to meet your requirements.
If the requirements are valid, fix the data model. In other words - your question has nothing to do with Oracle and nothing to do with rowid, rowscn or other pseudo columns in Oracle. It is a pure data modeling issue. Nothing more.

Splitting the single record into multiple records based on validity

Hi Guru's,
basically i am an BI consultant with less knowledge on ABAP, can i request your help on the ABAP task.
I am working on HR module which is integrated with SAP BI, the reports will be executed based on calendar month the requirement is i should split the single record into a multiple records based on validity of the record. basically the HR data would be in data from and date to.
below is the logic
Check whether the start and end date of the record are in the same month and year.
If yes  nothing changes
If no  create multiple records
1st record  original start date of the record u2018till end of that month
Following record  1st of the next month u2018till last day of the month
u2026
Last record  1st of the month u2018till original end date.
All fields will have the same values, only the datefrom and dateto fields change.
Can any one please provide me the same code to proceed on my task.
Thanks and Regards,
Venkat

Hi,
Using Rule group we can split it.
Using Rule Group in SAP-BI Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20rule%20group%20in%20sap-bi%20%20part%20-%201.pdf
Thanks
Reddy

Insert multiple rows of records into the database

The codes below allow me to insert a row of record into the database. How would I changed these to insert multiple rows at once? Please help!
String sql = "INSERT INTO EMPLOYEES" +
"(First_Name, Last_Name, Title, Phone) " +
" VALUES " +
PreparedStatement statement = conn.prepareStatement(sql);
statement.setObject (1, First_Name);
statement.setObject (2, Last_Name);
statement.setObject (3, Title);
statement.setObject (4, Phone);
boolean returnValue = statement.execute();

Hi mystiqueX,
As wmolosho has suggested in his answer to this very same question that you also posted to the JavaServer Pages forum, you can create a batch of inserts and perform them using the "executeBatch()" method. I will use Craig's sample code to demonstrate:
(Note that this code is untested!)
conn.setAutoCommit(false);
PreparedStatement statement = conn.prepareStatement(sql);
// assume you have an array of objects here
for (int i = 0; i < data.length; i++) {
statement.setString(1, data<i>.getFirstName());
statement.setString(2, data<i>.getLastName());
statement.setString(3, data<i>.getTitle());
statement.setString(4, data<i>.getPhone());
statement.addBatch();
statement.executeBatch();
conn.commit();If you are not familiar with it, allow me to suggest looking at the Making Batch Updates lesson on the Java Tutorial.
Hope it helps.
Good Luck,
Avi.

How do a get a record of the apps I have downloaded

How do a get a record of the apps I have downloaded

You can view the apps that are still available in your country's app store via the Purchased tab in the App Store app on your phone.
If you want to view your account's purchase history then log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases. That should show free as well as paid-for items. On your phone you can view the last 90 days purchases via http://reportaproblem.apple.com.
You can't view a list of actual downloads (e.g. you can't view how many times, and when, you've downloaded a particular app), only what you've purchased (included free items).

I ended up having two id's, one being my original when first getting into itunes and the other came when I opened a me account. I have purchases under the original id. How do I merge the old account into the new account

I ended up having two id's, one being my original when first getting into itunes and the other came when I opened a me account. I have purchases under the original id. How do I merge the old account into the new account

Sorry, but it is not possible to merge two Apple IDs/iTunes Store accounts.
Regards.

How to use one report column into the another report in obiee

How to use one report column into the another report in obiee

i dont want to use column as a filter for another report it should be report column for another report
Thanks,
Vivek

How do I share files uploaded into the Creative Cloud with other creative cloud members?

How do I share files uploaded into the Creative Cloud with other creative cloud members?

Should be easy. Try this...
In Thumbnails view, click the little triangle (pointing downward) in the lower-right corner of the asset you want to share.
In the blue icon bar that appears, click the Share icon (the third icon from the left, just right of the trash icon). The Share dialog should pop up.
In the Share dialog, enter the email address of the person with whom you want to share the asset, then click the Send Email button - they'll receive an email with a link to your asset. OR
You can also copy a link to the asset and then paste that into your own email client if you prefer. To do that, click the Link icon (looks like a "chain", and is to the right of the email "envelope" icon) - then click the Copy Link button.
Note that the Share options won't be available if your asset is set to "Private" - you can control whether an asset can be viewed (or downloaded) by others by clicking the Public/Private control (green or red "lock" icon).
You can also access the same Share controls if you click on the file to see it one-up (you can do this from either Thumbnails view or List view); click the Share icon near the upper right corner of the browser window (to the right of the asset name).
Hope that helps.

How to fetch the required record into the cache

Similar Messages

Maybe you are looking for