How to filer the data.
Hi All,
I am new to Warehouse Builder. I am facing a problem in loading the data from flat file to Table.
I am using a filter for this, but the thing it is not working.
Example, I am getting the flat file with employee information with employee_id, fname, lname, date_of_join, birth_date, deptno.
My requirement is not to load the data which date_of_join < '10/10/1990'.
How can I do this in the warehouse builder.
Thanks in advance for your kind suggestions....
Ramesh
Igor,
The problem I am facing is that, I could not stop loading values of the columns withe >,<, >= and <= .How can I proceed this kind of loading.
Ex: employee > 1001, employee < 2001 date_id <'10/10/1999'.
How to use the filter on the above mentioned values. I did used to the filter to do the job, but it did not went through. I received the error, which tells that, SQL *Loader did not support the >, < , <=, >= operators and the ones which supports are != and = operators.
Thanks in advance for your kind help.
Ramesh
Similar Messages
-
How to store the data coming from network analyser into a text or excel file
Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi 43 KBFirst let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
How to import the data in a .xls or .xlsx file into a oracle database table
Hi,
Please tell me how to import the data in a .xls or .xlsx file into a oracle database table in Oracle 10gR2 using Oracle Warehouse Builder 10gR2.....can we do something through Non-Oracle->ODBC?Yes, it is possible, look at this thread
[SQLServer access from AIX Warehouse builder|http://forums.oracle.com/forums/thread.jspa?messageID=2502982]
If your server (with target DB and OWB runtime) is on Windows OS this configuration will be simpler - you can use single server.
And additional link on OWB blog (with 11g transparent gateway)
[http://blogs.oracle.com/warehousebuilder/2008/01/11g_heterogeneous_agent.html]
(configuring nonoracle connection with 10g generic connectivity very similar to 11g gateway)
Also look at
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4406709207206#18830681837358
Regards,
Oleg -
How to read the data from Excel file and Store in XML file using java
Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com -
How to move the data of a table from sqlplus to XML file
Hi,
Could you pls guide me how to move the data of a table from sqlplus to XML file.
i want to do it from sqlplus rather than toad.pls help
ThanksOh..I'm in 9i.
Try this out..and let me know.
DECLARE
CTX DBMS_XMLGEN.CTXHANDLE ;
XML CLOB ;
F UTL_FILE.FILE_TYPE;
XMLC VARCHAR2(32767);
BEGIN
CTX := DBMS_XMLGEN.NEWCONTEXT('SELECT * FROM department1 ') ;
XML := DBMS_XMLGEN.GETXML(CTX) ;
XMLC:=TO_CHAR(XML);
SHOW_ENVELOPE(XMLC);
F := UTL_FILE.FOPEN('ATTACH_FILES','DEPT.XML', 'W');
UTL_FILE.PUT_LINE(F,XML);
UTL_FILE.FCLOSE(F);
END ;
Good luck!!!
Bhagat
null -
hey guys
i installed the sqlite and sqlite-net as requested in other answers i found, changed to x86, and add the .db3 file in my project.
but the problem is how to retrive the data that already in the file( i am not creating any table or data in the app, just read)
all the answer i found is to create a table first and then read the table, i tried to skip the step of creating a table, and read from the table directly, but failed with " no such table", by the way, i set the property of the .db3 file as "content",
"copy if newer"
can anyone please help? i appreciate that !Hello,
From your description, you want to read data from available sqlite file. When you add the sqlite file into your project, you need to change the sqlite file build action to content. After deploying to device, the sqlite file is located in installation folder,
you need to copy that file into storage folder before reading data. Please try the following code snippets.
private async void Button_Click_9(object sender, RoutedEventArgs e)
//check if file exists in storage folder, and then copy to local storage
bool flag = await FileExistsAsync("Data.db3");
if (!flag)
var folder = await Package.Current.InstalledLocation.GetFileAsync("Data.db3");
await folder.CopyAsync(Windows.Storage.ApplicationData.Current.LocalFolder);
// open sqlite and read data
public async Task<bool> FileExistsAsync(string fileName)
try
await Windows.Storage.ApplicationData.Current.LocalFolder.GetFileAsync(fileName);
return true;
catch (FileNotFoundException)
return false;
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey. -
How to store the data of a file into an ArrayList?
Hi! everyone.
I want to know
if I have a File, and the data in the file are type int, type String...
And I have a ArrayList which is of type Question
How do I store the data of that file into the ArrayList
I tried to use the while loop(use the hasNextLine() to read the data line by line)
But I cannot add data which are not of type Question to the ArrayList.
Can you tell me what I should do, please?
I also wonder that
The data of the file are of many types, but when I try to read it with the nextLine(), the data all turn out to be of type String. Why?
Thank you.
Edited by: Terry001 on Apr 30, 2008 1:13 PMNo, a line in the file is just part of a question
The format of the file is like this:
*<question type code> : String*
*<question point value> : int*
*<question category> : String*
*<question difficulty level> : int*
*<question text> : String*
*<question correct answer> : String*
*<optional question-specific data> : String*
*<question terminator> : String*
And here is an example
TF //TrueFalseQuestion
5 //points value
None //category
3 //difficulty level
The capital of the United States is Washington, D.C. //question text
True // answer
*** //quetion terminator
I created an ArrayList in the Test class:
private ArrayList<Question> questions; // Create inside constructor
public Test (String name, String instr)
testName = name;
scoreEarned = 0;
scorePossible = 0;
instructions = instr;
questions = new ArrayList<Question>(); //[MAX_NUMBER_OF_QUESTIONS];
}And I tried to use the following method to store the data of the file to the ArrayList
// This method loads a set of questions from a plain text file
public void loadQuestionsFromFile(String fileName) throws FileNotFoundException
try
File fileReader = new File("input.txt");
Scanner sc = new Scanner(fileReader);
while (sc.hasNextLine())
// I don't know how to pass the data I got from the nextLine() method to the ArrayList because they are of different type
catch (FileNotFoundException a)
System.out.println(a);
} As all you said, I should create an Question object in the while loop
Question temp = new Question ();But I have no idea how to pass the int and String to the Question object.
Thank you -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
How to load the data from excel file into table in oracle using UTL_FI
How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some exampleThis is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP -
How to export the data to a excel file from RSA3?
Hi experts,
1.I am trying to save the RSA (SRM extractor) to excel spread sheet to compare SRM data with BI data. When i run the the transaction RSA3 it just showed me 10 different data packets. How to export the data to excel spread sheet for reconciliation?
2. Does any body know if the stepup tables exist for SRM extractors?
Thank in advance
Sharat.Hello Sharat,
You have two options of saving data to excel sheet:
Step 1:
Goto RSA3, change the "Data Records / Calls" to 1000 and then execute. This way instead of 10 different packets you will get one packet.
Step2:
Click on the list button, open the packet by double clicking it. You will see all the data on your screen.
Step3:
Goto System -> List -> Save - > Local File -> Spreadsheet and give some name for your xls file.
Assign points if helpful.
Regards,
F-S -
How to upload the data from excel(3 tabs) file to sap environment
Hi all,
This is Mahesh.
how to upload the data from excel(3 tabs) file to sap environment (internal tables) while doing bdc.Hi,
The FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' makes it possible to load a worksheet into an internal table in ABAP.
However, if you want to get the data from several worksheets, I think you are stuck with OLE access to your Excel Workbook...
You can find a solution for 2 worksheets in this post :
TO UPLOAD DATA FROM 2 EXCEL SHEETS INTO TWO INTERNAL TABLES
I think you can easily modify it to handle any number of worksheets.
Hope it helps !
Best regards,
Guillaume -
How to display the data in XML files into JSP using Jdeveloper.
Hi All,
I have two XML files one XML file has the view names and the other has the table names of a particular views, how to display the data in JSP using JDeveloper where when i click a particular view the list of tables of that particular view from XML file two should be displayed in JSP Page.
Are there any reference documents, regarding the above process please can anyone guide through how to do it.Let the servlet ask your business tier to provide the data, then stuff it into beans, and pack those into the Session instance. Then forward the request to the JSP, let the JSP get those beans and display them.
-
How to store the datas in a .txt file in to a JTable in Java Swing
Hi sir,
Here i want to know how to store the data's of a .txt file
in to a JTable in java swing.
Where here the .txt file like for eg,spooler.txt is in the server and from there it will come to my client machine what i have to do is to take that .txt file and store the datas of the .txt file
in a JTable.This is what i want.So pls. do help and provide the code as well.I will be thankful.Since i am involved in a project which involves this it is Urgent.
Thanx,
m.ananthuYou can't just display data from a text file in a JTable. You have you understand the structure of the data so that you can parse the data and create a table model that can access the data in a row/column format. Here is an example of a simple program that does this:
http://forum.java.sun.com/thread.jsp?forum=57&thread=315172
Maybe you are looking for
-
hi everyone, i have defined new tax codes by using OB40 and FTXP. when i create a standart PO, these codes appear at "invoice" section of ME21N. but when i enter incoming invoice from MIRO these codes don't appear. what can cause this problem. if you
-
Disc will no longer burn - QMaster error
Yesterday (and on many other days) I burned a Blu-ray Disc out of FCP7 (using Share). Today when I follow the exact same procedure as I always do, I get the "Share Failure. An Internal error occurred: Apple Qmaster File Agent not found." error messag
-
Oracle RAC Nodes getting reboot in case of preferred controller failed
When we are disconnecting both Fiber cable from preferred Controller A or plugging out Controller A card from Disk Array(IBM DS 4300), After 90 seconds both the servers are rebooting. In this time complete RAC network is going out of service for appr
-
Hi everyone, Could anyone tell me if there is a BAPI for creating a Request For Quotation, please? I found several BAPIs that create a Quotation, such as BAPI_QUOTATION_CREATEFROMDATA, or BAPI_QUOTATION_CREATEFROMDATA2. If there are no BAPIs for RFQ,
-
Output determination in Group - VG01
Hi All, I have been analysing this for a while now and I need your help as I have not found any answers. When I create a group in VG01 the output is not getting determined. No determination analysis exists. But when I goto VG02 -> Goto -> Output then