How to fill data in reporting agent for alert

Dear friends
        i use alert for MM module , i can set this query in reporting agent and also maintain variant for this query.
        i can scheduling this alert. Scheduling is finished with no error but i am not geting any data.
      using this variant i can run this query in rsrt and BX , it give some result.
       so my que. is any other setting for alert or give me setp for creating alert.

Palav,
Go thru the link for Broadcasting settings.
http://help.sap.com/saphelp_nw04/helpdata/en/aa/359840dfa5a160e10000000a1550b0/frameset.htm
Cheer's
HVR.

Similar Messages

  • IDOC: How to fill data for sub segments ?

    Hi,
    I have 3 segments, segA , segB , segA1 . segA1's parent segment is segA . segA and segB are at the same level .
    How to fill data for segA1  ? can you give some sample code ?
    Thanks a lot !

    hi,
    You can fill the segment in the sequence in the idoc either parent or child.
    In you case first fill parent segment SEGA next SEGA1. Then you can fill the SEGB.(If segB is deifned as next segment of segA in the idoc structre)
    Thanks and regards,
    shyla kumar

  • How to fill data  for asset accoutning datasources

    hi gurus
    i want to know how to fill data for the FI:asset accounting data sources.As these datasources are not related to Logistics,i think filling setuptables concept doesnot come into picture here.thenhoe to  fill data for the datasources:0FI_AA_001,0FI_AA_005,0FI_AA_006
    Pls give me some inputs ASAP
    Its very Urgent
    Thanks in Advance
    Surya Reddy

    Hi,
    Asset Accounting works with Timestamp mechanism.  No Setup table concept like logistics.  Find the prerequisites for AA extraction.
    For Asset Accounting Delta Extraction you first need to have this BADI - FIAA_BW_DELTA_UPDATE active in the system:
    Check the link below for more details about the badi and the delta extraction procedure.
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/f4153c4eb5d82ce10000000a114084/frameset.htm
    Sequence of Data Requests
    For summarization of line items by master record characteristics (such as cost center) during posting of ODS objects to Info Cubes, master data must already exist prior to extraction of transaction data.
    Also the following sequence must therefore be kept to during extraction:
    1. 0FI_GL_4 General Ledger: line items (if required)
    2. 0ASSET_ATTR_TEXT Asset sub number (flexible updating)
    3. 0ASSET_AFAB Depreciation area real or derived
    Then the transaction data
    0FI_AA_11 FIAA: transactions and / or
    0FI_AA_12 Posted depreciations (period values)
    Hope it helps
    Regards
    Srikanth

  • How to Extract data and reports from the SAP BW warehouse

    Hi to All Guru's
    I am new to SAP BW. Can any one help me to know, How to Extract data and reports from SAP BW. Do we use any tools.  After Extracting the data from SAP BW how can we move all the data to Cognos.  It would be kind enough to provide me with any documentation or links.  Step by step procedure would be very much helpfull to me.
    Thanks
    Venu

    Hi Voodi
    Thanks for the quick response. I think Open hub is to extract the data from SAP BW, but what about sending this data into Cognos.  Can you please let me know in detail regarding answer. If possible send me any documentation or links regarding this.  Thanks for your concern.
    Venu

  • How to fetch data in report related to fb03 , bkpf, bset table ?

    how to fetch data in report related to  fbo3, table bkpf, bset etc.
    if any body is having any report related to these tables then please share.

    Moderator message - Welcome to SCN.
    But please ask a specific questio - thread locked.
    Also, Please read Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!! and How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
    Rob

  • How to see data modeller reports in sql developer?

    How to see data modeller reports in sql developer?

    1) export your design to existing schema in Oracle database
    2) define connection to that schema in SQL Developer
    3) find "Data Modeler Reports" in reports window of SQL Developer - probably "design rules" are more interesting here
    Philip

  • How do I change the User Agent for Safari on my iPad?  I need this for a specific website for work.

    How do I change the user agent for Safari on my iPad?  I know how to do it on my desktop version, but I need it for my iPad.

    You can rename the iPad here:
    Settings - General - About - Name
    For Siri make sure he has himself as a contact in the Contacts app then:
    Settings - General - Siri - My Info and select his contact info

  • How to fill data in to extended idoc segments  for outbound program

    Hi all,
    I am new to this Community In the extension of  Standard idoc INVOIC02  with some custom segments like zemail, zfax,,,,how to fill the data into both standard segments and custom segments for outbound idoc using exit EXIT_SAPLVEDF_002 of standard function module IDOC_OUTPUT_INVOIC...
    i need some sample code
    THANKS
    PAVAN K

    Hi all,
    I am new to this Community In the extension of  Standard idoc INVOIC02  with some custom segments like zemail, zfax,,,,how to fill the data into both standard segments and custom segments for outbound idoc using exit EXIT_SAPLVEDF_002 of standard function module IDOC_OUTPUT_INVOIC...
    i need some sample code
    THANKS
    PAVAN K

  • How to fill data in a table automatically

    Hello Experts,
    I would like to know if its possible to fill data in a table by looping.
    I have the following table:
    Draws(
    NUM NUMBER,
    START_DATE DATE NOT NULL,
    END_DATE DATE NOT NULL,
    ACTIVE CHAR(1 BYTE) DEFAULT 'Y')
    Now my table should contain the foll:
    Num start_date end_date active
    1 23/01/2010 21:00:00 30/01/2010 19:00:00 Y
    2 30/01/2010 21:00:00 06/02/2010 19:00:00 Y
    I have an initial start date and the end_date is always (start_date + 7) and the next start date starts with the previous end_date but time changes from 19:00 to 21:00.
    Is there a way i can enter those values on a weekly basis???
    Thanks
    Edited by: Kevin CK on Jul 5, 2010 3:07 AM

    there are a number of ways to do weekly inserts. it just depends on your environment and what you want to manage.
    1. write a PL/SQL procedure to do the periodic insert. i assume you know how to do this since you only asked about doing the insert weekly.
    2. options for running the procedure weekly:
    a. using your OS job scheduler, schedule a batch job to run a sql script to execute the procedure.
    b. inside the Oracle database, use DBMS_SCHEDULER (or DBMS_JOB if you are on a version older than 10g) to run the procedure.
    c. write yourself a reminder on a sticky note to run the procedure each week, post it on your computer, and run it manually.
    if you need more details, just say so.

  • How to fill data when call function of sap standard script form?

    Hi every experts,
    <Priority Normalized>
    In our system, when we log in 'FR', we can print purchase order in language Franch,in t_code:ME22N.  And when logging in 'EN', we can print it in language English, in ME22N. The English form is just only translated from Franch, with all same structure and frame.  The form is done by script form.
    And when logging in 'ZH', we create a new program, calling function smartform, instead of translating from EN language. Because of different structure and frame, I don't know the way to write script, so  I print puchase order by smartform, when logging in 'ZH'.
    But I have a new issue. Our MM module consultant needs me to print Chinese form if one condition, print English form in other condition.
    So I have no idea to solve it. Because in my program, I get data to fill smartform and call function of smartform. And I don't know how to get data to fill script form. I only know the function name, 'OPEN_FORM' 'WRITE_FORM' 'CLOSE_FORM'.....
    If I only call the several functions, I will get only frame without no data. So who can tell me how to do????
    <Urgency downgraded>
    Edited by: Suhas Saha on Jul 26, 2011 3:34 PM
    Edited by: Vinod Kumar on Jul 26, 2011 4:09 PM

    Hi,
    Normally if we look in NACE transaction, you can see that upto five different FORMS can be assigned to a single output type . i.e. for each form there will be a seperate routine through which it gets called. But it all start from the first form only.
    so you need to write your code in the ENTRY of the first form and if it does not satisfy do not go for processing of it but just exit of that form ENTRY. so that it will take you to next form.
    hope this helps.
    Thanks,
    Venkatesh

  • How to fill up set up tables for 2lis_03_UM and BF?

    Hi,
    I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
    Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
    OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
    please help.
    thanks

    Hi,
    I think you can follow the same procedure.  After completion of setup table filling you can check the result in RSA3.
    In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
    Regards,
    Durgesh.
    Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM

  • How old historical data can be available for SCOM performance views to show up in graphs?

    I have created performance rule based on performance counter and created a performance view on the target of the rule. It shows me the graph of how performance counter value changed over the period of time.
    In SCOM console there is an option in performance views, to choose start date-time and end date-time for the performance graph. It allows me to select a range of say few years.
    However going by the Microsoft documentation, it appears that performance data is stored in OperationsManagerDW database only for limited period.
    I have a feature requirement where we need to have performance views or reports or some means where for compliance purpose we should be able to show older data as well.
    So my query is exactly how much historical data(up to how old) is actually available for performance views? Is there any specific information or MS documentation available where I can get this information (duration of historical data in specific number of days
    or years or so.) I need to decide based on this if I can use performance views or I need to go for some kind of reports like SSRS reports instead.

    Hi,
    Additionally, I would like to share the following article with you. Hope it helps.
    Understanding and modifying Data Warehouse retention and grooming
    http://blogs.technet.com/b/kevinholman/archive/2010/01/05/understanding-and-modifying-data-warehouse-retention-and-grooming.aspx
    Niki Han
    TechNet Community Support

  • How to fill data in idoc

    Hi experts,
    Could u please give some sample codes for filling data into idoc.

    Hi Nisha,
    Go through this userdefined program u can understand .
    *& Report  ZBT_SEL_PROGRAM                                             *
    REPORT  zbt_sel_program                         .
    TABLES: mara.
                  Data declaration
    *--Material number selection.
    SELECT-OPTIONS: s_matnr FOR mara-matnr.
    PARAMETERS:
    *--Rec.Partner
       p_rcvprn TYPE edi_rcvprn,
    *--Message type
       p_msgtyp TYPE edi_mestyp.
                  Internal table declaration
    DATA:
    *--MARA data
          it_mara TYPE STANDARD TABLE OF mara WITH HEADER LINE,
    *--To fill the segment Z1MARM
          it_temp_mara TYPE STANDARD TABLE OF z1marm WITH HEADER LINE,
    *--MAKT data
          it_makt TYPE STANDARD TABLE OF makt WITH HEADER LINE,
    *--To fill the segment E1MAKTM
          it_temp_makt TYPE STANDARD TABLE OF e1maktm WITH HEADER LINE.
    DATA: st_edidd TYPE STANDARD TABLE OF edidd WITH HEADER LINE,
          st_comm_cont TYPE STANDARD TABLE OF edidc WITH HEADER LINE,
          st_mast_cont TYPE edidc.
    *--Fetch the data from MARA table
    SELECT * FROM mara INTO TABLE it_mara WHERE matnr IN s_matnr.
    IF sy-subrc = 0.
      SORT it_mara.
    ENDIF.
    *--Fetch the data from MAKT table
    IF NOT it_mara[] IS INITIAL.
      SELECT * FROM makt INTO TABLE it_makt FOR ALL ENTRIES IN it_mara
                        WHERE matnr = it_mara-matnr.
      IF sy-subrc = 0.
        SORT it_makt.
      ENDIF.
    ENDIF.
    *--Fill the iternal tables which is type the same of Segments
    LOOP AT it_mara.
      MOVE-CORRESPONDING it_mara TO it_temp_mara.
      APPEND it_temp_mara.
      CLEAR it_temp_mara.
    ENDLOOP.
    LOOP AT it_makt.
      MOVE-CORRESPONDING it_makt TO it_temp_makt.
      APPEND it_temp_makt.
      CLEAR it_temp_makt.
    ENDLOOP.
    *--Fill the segments
    LOOP AT it_temp_mara.
      st_edidd-segnam = 'Z1MARM'.
      st_edidd-sdata = it_temp_mara.
      APPEND st_edidd.
      CLEAR st_edidd.
    ENDLOOP.
    LOOP AT it_temp_makt.
      st_edidd-segnam = 'E1MAKTM'.
      st_edidd-sdata = it_temp_makt.
      APPEND st_edidd.
      CLEAR st_edidd.
    ENDLOOP.
    *--Fill Master IDOC
    st_mast_cont-rcvprt = 'LS'.
    st_mast_cont-rcvprn = p_rcvprn.
    st_mast_cont-mestyp = p_msgtyp.
    st_mast_cont-idoctp = 'ZMATMAS01'.
    *--Create the communication IDOC by passsing master IDOC and control
    information.
    CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
      EXPORTING
        master_idoc_control                  = st_mast_cont
      OBJ_TYPE                             = ''
      CHNUM                                = ''
      TABLES
        communication_idoc_control           = st_comm_cont
        master_idoc_data                     = st_edidd
    EXCEPTIONS
       error_in_idoc_control                = 1
       error_writing_idoc_status            = 2
       error_in_idoc_data                   = 3
       sending_logical_system_unknown       = 4
       OTHERS                               = 5
    IF sy-subrc = 0.
    *--Commit work
      COMMIT WORK.
    ENDIF.
    *--Display IDOC Number.
    LOOP AT st_comm_cont.
      WRITE: 'IDOC Numbers:',st_comm_cont-docnum.
    ENDLOOP.
    Rewards some points.
    Rgds,
    P.Naganjana Reddy

  • How to fill TAX Form W-8IMY for Individual Non-USA developer?

    Hello,
    Firstly: I couldn't find a simple remove-formatting option in the wsiwyg editor of this new post entry box, so the copy paste resulted in a text like this. 
    Now my question: I had never filled up this form TAX Form W-8IMY before and searching internet shows only how to fill up form Form
    W-8 BEN for windowsphone store but not the form W-8IMY which shows up in my account. It has some fields which I don't understand like  Type
    of entity and rest from part 3 onwards.  I am an Individual Non-USA based developer.
    If you have any sample tutorial, blog, etc that can tell me how to fill up this tax form then it will be of great help.
    Thanks,
    AJ

    Hello Adaj2014,
    We recently made some changes to the tax form, please go to
    http://login.live.com and sign out of all services then clear your browser cache.
    If this does not resolve the issue please
    contact developer support.
    -Eric
    Windows and Windows Phone Dev Center Support
    Send us your feedback about the Windows Platform

  • How to upload data into Classification-MM02 for each MATNR By using BAPI

    Hi all
          How to upload data into characterstic value in  classification- MM02 for each MATNR by using BAPI.

    Hi Siva,
    Please try BAPI BAPI_OBJCL_CHANGE.
    The object key should be material number and object table should be MARA.
    Regards
    Hiren K.Chitalia

Maybe you are looking for