How to filter with multiple selection on a single column on external list, currently only one filter per column is available.

I have external list where i want to apply multiple filter for every column like we do in Excel spreadsheet - we can filter a spreadsheet column by selecting multiple checkbox for every column. I am using Sharepoint 2010
Is this possible in sharepoint 2010? Any idea how to acheive that?
Thanks in advance.

Hi Rahul,
According to your description, my understanding is that you want to use filter with multiple values on a column of an external list in SharePoint 2010.
Per my knowledge, there is not an OOB way to achieve it. As a workaround, you can custom the web part to implement it. There is an articles for your reference:
http://blogs.telerik.com/aspnet-ajax/posts/13-11-05/add-excel-like-multi-select-filtering-to-your-asp.net-datagrid
In addition, you can use a third party solution to achieve it, please take a look at:
http://abilitics.com/Blog/index.php/sharepoint-improved-grids-with-excel-like-inline-editing/
http://social.technet.microsoft.com/forums/sharepoint/en-US/3d19b9d3-d394-4af9-9e8e-2dee70b50540/filter-column-with-multiple-filter-values-in-sharepoint-list
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

How do i take one layer with multiple selections...

how do i take one layer with multiple selections and make those selections their own layer?

Yes sir. It w was really hard to explain. It is discontiguous segments that are separated by transparent areas. And I want those non transparent areas to be on their own layer. I have a photo shop file that has a bunch of buttons on them and they are on a transparent background. It is one layer. I want to select all the buttons and put them on their own layers. I can do this manually by selecting a button and cmd Just to a new layer, but when I have 200 buttons it is a daunting task.
Sent by MailWise<http://www.mail-wise.com/installation/4> – Your emails, with style.

How to create a table with multiple select on???

Hi all,
I am new to webdynpro and my requirement is to create a table with multiple selection on.I have to add abt 10 rows in the table but only 5 rows should be visible and moreover a verticalscroll should be available to view other rows.Can anybody explain me in detail how to do that.Please reply as if you are explaining to a newcomer.Reply ASAP as i have to do it today.
Thanxs

Hi,
1. Create a value node in your context name Table and set its cardinality to 0:n
2. Create 2 value attributes within the Table node name value1 and value2
3. Goto Outline view> Right click on TransparentUIContainer>Apply Template> Select Table>mark the node Table and it's attributes.
you have created a table and binded its value to context
Table UI properties
4.Set Selection Mode to Multi
5.Set Visible Row Count to 5
6.ScrollableColCount to 5
In your implemetaion, you can add values to table as follow:
IPrivate<viewname>.ITableElement ele = wdContext.nodeTable().createTableElement();
ele.setValue1(<value>);
ele.setValue2(<value>);
wdContext.nodeTable().addElement(ele);
The above code will allow you to add elements to your table node.
Regards,
Murtuza

How to create parameter with multiple selection in a query (SQ02) ?

Hi Exports
Do you know how to create parameter with multiple selection in a query (transaction SQ02)?
thanks.

Hi
i know how to create user parameter at SQ02,
the question is how to create multiple selection parameter?

How to select value from list with multiple selections ?

HI,
i have a list with multiple selections where i show email address retrieved from database.
what i want to do is to send the selected email address to the invoiceedit.jsp.
please look at the following code which gives you the better idea.
<td class='smalltext'><select name="email" size="3" multiple="multiple">
   <%
   Connection conn = null;
   Statement stmt = null;
   Statement stmt_contactperson = null;
   Statement stmt_address = null;
   try{
      conn = getREConnection();
       stmt = conn.createStatement();
   ResultSet rs = null;
   rs = stmt.executeQuery("SELECT PROPERTYID, VALUE FROM PROPERTIES WHERE ENTITYID="+ g_strGroupID+" AND NAME = 'invoice_default_email'");
   int numofrows = 0;
   while(rs.next())
           %>
   <option value="<%= rs.getString("VALUE") %>" selected="selected"> <%= rs.getString("VALUE") %> </option>
    <%
       }//end of while
      %>
     </select>
    <a href="invoiceedit.jsp?entityid=<%=g_strGroupID%>&add=1"><font color="#000000">Add</font></a>
     <a href="invoiceedit.jsp?entityid=<%=g_strGroupID%>&email_to="><font color="#000000"> Edit</font></a> </td>thanks

Use a form button instead of a link so that you can send it as a request parameter to the server. In the server side just use HttpServletRequest#getParameterValues() to obtain all values for the given parameter name. If you really need a link rather than a button, then use Javascript to submit the form on click of the link.
That said, your design is bad. Java code belongs in Java classes, not in JSP files. Database access logic belongs in a DAO class. Business and controlling logic belongs in a Servlet class. Only presentation logic belongs in the JSP file. Avoid scriptlets as much as possible and use JSP EL and/or JSTL instead.

Mail with multiple gmail accounts sending messages from wrong email, other than the one i select

mail with multiple gmail accounts sending messages from wrong email, other than the one i select:
i'm using mail on osx 10.7 with multiple gmail accounts. when i create an email, i check to be sure i'm sending/replying from the correct account. after i send it, somehow it actually sends it from a different account, other than the one i've selected "from." this is evidenced by the reply email i receive. how can i fix this?
in preferences, i have "send new messages from : account of selected mailbox"

From the Mail menu bar, select
          Mail ▹ Preferences...
The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
          Send new messages from:
choose
          Account of selected mailbox
Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
In the Account Information pane, select the correct server in the menu labeled
          Outgoing Mail Server (SMTP)
If there's only one server in the menu, select
          Edit SMTP Server List...
and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
          Card ▹ Make This My Card
from the menu bar.

[svn:fx-trunk] 10943: Fix to dragging from List with multiple-selection

Revision: 10943
Author:   [email protected]
Date:     2009-10-08 15:46:27 -0700 (Thu, 08 Oct 2009)
Log Message:
Fix to dragging from List with multiple-selection
- The fix is to postpone the selection commit until we make sure the user has not started a drag gesture.
- Exclude the dragEnabled, dropEnabled, dragMoveEnabled properties for DropDownList
QE notes: None
Doc notes: None
Bugs: None
Reviewer: Deepa
Tests run: checkintests, mustella List, DropDownList
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DropDownList.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as

Applescript list with multiple selections

Hello guys, i have h big problem...
i was trying the multiple selections part by the command list, but if i select 2- and more it does nothing (i'm using if x is y then *linebreake* else if ...)
so i tried another way script:
tell application "Finder"
--get folders of me--
          set a to get name of folders of folder "Contents:Resources:Versionen" of (path to me) --in this folder i got folders named {"0", "1", "2", "3", "4", "5", "6", "7", "8", "9"}--
          set b to choose from list a with prompt "Choose your Minecraft Version!" with multiple selections allowed
--next step--
count b
          set c to result
          repeat c times        --with this part i wanted to handle every selected folder as an individual to duplicate it somewere else
                    set ab to b * -1
duplicate folder ab to folder (choose folder)
          end repeat
end tell
thanks for helping me

The following script (tested under OS X 10.8.2) should do what you are asking for:
tell application "Finder"
    set theSourceFolder to folder "Contents:Resources:Versionen" of (path to me)
    set theFolderNames to get name of folders of theSourceFolder
    set theChosenNames to choose from list theFolderNames with prompt "Choose your Minecraft Version!" with multiple selections allowed
    if result is false then return
    set theDestinationFolder to choose folder
    repeat with thisName in theChosenNames
        duplicate folder thisName of theSourceFolder to theDestinationFolder with replacing
    end repeat
end tell
Message was edited by: Pierre L.

List with multiple selection

Hello;
I seek a code to implement a list with multiple selection for a browser Web (HTML is imited).
I have a list containing of the years, the user can select one or several years and I created dynamically a array : for each year a column.
Thank you;

Look at JList.
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JList.html
� {�

RSA1 Document - Issue with "multiple selection" Characteristic

Hi,
I have the following issue with a web template showing monthly reporting results (act/plan/var) for a specific cost center broken down following a cost element hierarchy.
My purpose is to attach each month some comments and these comments are made at the query level, not for each individual cost element.
However, as explained in note 501593, when creating my document, I have to restrict my cost elements since they are regarded as "multiple selections".
I could go and limit from 6 to one single value through table RSODADMIN but I never know for sure that this single cost element would always show up in my query.
In RSA1 > document > properties of the comment, is there any way for me to go and input a range for my cost elements, instead of having to enter cost element by cost element ?
Thx
Stéphane

Hi,
I have the following issue with a web template showing monthly reporting results (act/plan/var) for a specific cost center broken down following a cost element hierarchy.
My purpose is to attach each month some comments and these comments are made at the query level, not for each individual cost element.
However, as explained in note 501593, when creating my document, I have to restrict my cost elements since they are regarded as "multiple selections".
I could go and limit from 6 to one single value through table RSODADMIN but I never know for sure that this single cost element would always show up in my query.
In RSA1 > document > properties of the comment, is there any way for me to go and input a range for my cost elements, instead of having to enter cost element by cost element ?
Thx
Stéphane

How to deal with multiple disk path's

hi
i'm setting up a new server with virtual servers with extra io domain's
now i have a question on how to deal with multiple disk path's
so following questions:
- can i enable multipath on the primary and on the alternate domain?
i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
- if i can't enable multipathing how to handle this
for example a disk has on the primary domain 4 path's to a disk
do i then assign all 4 path's to a virtual disk server or do i create a virtual disk server per path
if i do the first is adding all the path to the same mpgroup enough or not

Hello
1.-can i enable multipath on the primary and on the alternate domain? Yes. i understand for multipath mpxio or similar.
2.-i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
if you are going to use alternate domain you have to give this IO the all bus root nexus, what you describe sounds like DIO,
3.- - if i can't enable multipathing how to handle this for example a disk has on the primary domain 4 path's to a disk
If you have 4 path to the same disk in the primary and you are using multipath let's say mpxio, then you will have only one disk in the primary, which is a virtual device that handle the 4 paths. That's is what you have to use in a vds.
Please check this doc to see the best practice to ldom
white-paper-ldom
regards
eze

How do I host multiple domains on a single Messaging Server?

How do I host multiple domains on a single Messaging Server?
<p>
To host multiple domains on one Messaging Server, use the
mailAlternateAddress attribute. If you want to host two domains
(customer1.com and customer2.com) on your server mail1.domain.com,
make sure that:
The various domains (in DNS) point to the installed mail server
(you must have the MX records that
points mail for customer1.com to mail1.domain.com and
customer2.com to mail1.domain.com)
That each person receiving mail at customer1.com and
customer2.com has an appropriate mailAlternateAddress
attribute describing the appropriate email address. For
instance, John Doe can have an email address (i.e. the value
of the 'mail' attribute for the John Doe LDAP entry) of
[email protected] and receive his mail on
[email protected] (the value of the mailAlternateAddress
attribute)
With Messaging Server 3.5, mailAlternateAddress can take the
form of @mail1.domain.com. If jdoe's mailAlternateAddress is
set to @mail1.domain.com, mail sent to [email protected]
will be delivered to [email protected]

jaygatsby1123 wrote:
So what exactly am I doing with virtual hosts? There is a place for Aliases... What would I put in the "Aliases" box?
Any other host name that you want to resolve to the specified virtual host. It's quite literally an alias.
if you want www.example.com and www.example.org to end up at the same web site and you already have a virtual host — Apple refers to virtual hosts as sites — configured for www.example.com in Server.app, then you'd add www.example.org as an alias for the www.example.com virtual host (site).
Virtual hosts are implemented in a web server using some details of the HTTP or HTTPS protocol, and what the web browser (client) specified. The client gets handed an IP address or a domain name by the user, and the client then fetches the associated IP address for the target web server from the client's DNS services or local host database, and the client then connects to the IP address and passes over the text string that the user had requested — the IP address or domain name or even some local shortcut set up in the client system — via the HTTP or HTTPS protocol. The web server receives and processes this arriving text string from the client, and uses it to select which web site to render back to the web client. One subtle detail lurks here, too: the server's own DNS configuration really isn't involved in the selection of the virtual host.

How do I scan multiple documents to a single pdf from the ADF on my MX922?

How do I scan multiple documents to a single pdf from the ADF on my MX922?
Solved!
Go to Solution.

Hi Riceburner1,
Since you have had difficulty scanning using My Image Garden, you can scan using the IJ Scan Utility program that also comes with the printer. To do this, please follow these steps:
1. Place the documents in the ADF or on the platen glass of the printer.
2. Start the IJ Scan Utility.
For Windows 8.1:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it, then continue with Step 3 below.
For Windows XP:
1. Go to your START MENU, then select ALL PROGRAMS, then CANON UTILITIES, then the IJ SCAN UTILITY program.
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears. Please continue with Step 3 below.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window. In the Select Source field of the Scan Options section, select DOCUMENT (ADF/PLATEN) to scan items placed directly on the platen glass, DOCUMENT (ADF SIMPLEX) to perform single-sided scanning from the ADF, or DOCUMENT (ADF DUPLEX) to perform double-sided scanning using the ADF. You can then set the item size, resolution, etc. in the Scan Options section as desired.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file. Please note that the filename that you give the document here will be the default filename for all items scanned until you change the file name. If you leave the file name the same in the field, the scanned item will have a sequential number appended to the end of whatever name you give it.
b.) In the DATA FORMAT field, use the drop-down arrow to select the desired option. If you are scanning a multipage document, select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. In the APPLICATION SETTINGS section of the window, please select the DO NOT START ANY APPLICATION option.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Once the scan is completed, scanned images are saved in the previously selected folder location specified in the SETTINGS... window.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I insert multiple rows from a single form ...

How do I insert multiple rows from a single form?
This form is organised by a table. (just as in an excel format)
I have 20 items on a form each row item has five field
+++++++++++ FORM AREA+++++++++++++++++++++++++++++++++++++++++++++++++++++
+Product| qty In | Qty Out | Balance | Date +
+------------------------------------------------------------------------+
+Item1 | textbox1 | textbox2 | textbox3 | date +
+ |value = $qty_in1|value= &qty_out1|value=$balance1|value=$date1 +
+------------------------------------------------------------------------+
+Item 2 | textbox1 | textbox2 | textbox4 | date +
+ |value = $qty_in2|value= $qty_out1|value=$balance2|value=$date2 +
+------------------------------------------------------------------------+
+ Item3 | textbox1 | textbox2 | textbox3 | date +
+------------------------------------------------------------------------+
+ contd | | | +
+------------------------------------------------------------------------+
+ item20| | | | +
+------------------------------------------------------------------------+
+ + + SUBMIT + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Database Structure
+++++++++++++++++
+ Stock_tabe +
+---------------+
+ refid +
+---------------+
+ item +
+---------------+
+ Qty In +
+---------------+
+ Qty Out +
+---------------+
+ Balance +
+---------------+
+ Date +
+++++++++++++++++
Let's say for example user have to the use the form to enter all 10 items or few like 5 on their stock form into 4 different textbox field each lines of your form, however these items go into a "Stock_table" under Single insert transaction query when submit button is pressed.
Please anyone help me out, on how to get this concept started.

Hello,
I have a way to do this, but it would take some hand coding on your part. If you feel comfortable hand writing php code and doing manual database calls, specificaly database INSERT calls you should be fine.
Create a custom form using the ADDT Custom Form Wizard that has all the rows and fields you need. This may take a bit if you are adding the ability for up to 20 rows, as per your diagram of the form area. The nice thing about using ADDT to create the form is that you can setup the form validation at the same time. Leave the last step in the Custom Form Wizard blank. You can add a custom database call here, but I would leave it blank.
Next, under ADDT's Forms Server Behaviors, select Custom Trigger. At the Basic tab, you enter your custom php code that will be executed. Here you are going to want to put your code that will check if a value has been entered in the form and then do a database INSERT operation on the Stock_table with that row. The advanced tab lets you set the order of operations and the name of the Custom Trigger. By default, it is set to AFTER. This means that the Custom Trigger will get executed AFTER the form data is processed by the Custom Form Transaction.
I usually just enter TEST into the "Basic" tab of the Custom Trigger. Then set my order of operations in the "Advanced" tab and close the Custom Trigger. Then I go to the code view for that page in Dreamweaver and find the Custom Trigger function and edit the code manually. It's much easier this way because the Custom Trigger wizard does not show you formatting on the code, and you don't have to keep opening the Wizard to edit and test your code.
Your going to have to have the Custom Trigger fuction do a test on the submitted form data. If data is present, then INSERT into database. Here's a basic example of what you need to do:
In your code view, the Custom Trigger will look something like this:
function Trigger_Custom(&$tNG) {
if($tNG->getColumnValue("Item_1")) {
$item1 = $tNG->getColumnValue("Item_1");
$textbox1_1 = $tNG->getColumnValue("Textbox_1");
$textbox1_2 = $tNG->getColumnValue("Textbox_2");
$textbox1_3 = $tNG->getColumnValue("Textbox_3");
$date1 = $tNG->getColumnValue("Textbox_3");
$queryAdd = "INSERT INTO Stock_table
(item, Qty_In, Qty_Out, Balance, Date) VALUES($item1, $textbox1_1, $textbox1_2, $textbox1_3, $date1)"
$result = mysql_query($queryAdd) or die(mysql_error());
This code checks to see if the form input field named Item_1 is set. If so, then get the rest of the values for the first item and insert them into the database. You would need to do this for each row in your form. So the if you let the customer add 20 rows, you would need to check 20 times to see if the data is there or write the code so that it stops once it encounters an empty Item field. To exit a Custom Trigger, you can return NULL; and it will jump out of the function. You can also throw custom error message out of triggers, but this post is already way to long to get into that.
$tNG->getColumnValue("Item_1") is used to retrieve the value that was set by the form input field named Item_1. This field is named by the Custom Form Wizard when you create your form. You can see what all the input filed names are by looking in the code view for something like:
// Add columns
$customTransaction->addColumn("Item_1", "STRING_TYPE", "POST", "Item_1");
There will be one for each field you created with the Custom Form Wizard.
Unfortunately, I don't have an easy way to do what you need. Maybe there is a way, but since none of the experts have responded, I thought I would point you in a direction. You should read all you can about Custom Triggers in the ADDT documentation/help pdf to give you more detailed information about how Custom Triggers work.
Hope this helps.
Shane

How can i scan multiple pages in a single file in pdf.

How can i scan multiple pages in a single file in pdf using 1536 dnf.

Hi @veerendrajain ,
I see that you would like to save multiple PDF documents into one file. I would like to help you out today.
In the HP Scan Software, select Advanced scan settings, click on the File tab and uncheck Create a separate file for each scanned image.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to filter with multiple selection on a single column on external list, currently only one filter per column is available.

Similar Messages

Maybe you are looking for