How to find a DWORD in whole registry? (No specific path)

Hi,
I need to know how can we find a DWORD value throughout the
whole registry ??
In our registry there is a DWORD value called
"Acceleration.Level", it lies inside the following path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Video
But this path contains multiple Keys with different names in
different systems. So, that is why i have no exact path to define
to get the value.
So, i need to know can we search the whole registry for
this?? or can we just search
Video Key and other sub Keys inside it??
Need some help on this.
Regards,
Amir

AntiTRUST? wrote:
> Hi,
> I need to know how can we find a DWORD value throughout
the whole registry ??
>
> In our registry there is a DWORD value called
"Acceleration.Level", it
> lies inside the following path:
>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Video
> But this path contains multiple Keys with different
names in different
> systems. So, that is why i have no exact path to define
to get the value.
>
> So, i need to know can we search the whole registry for
this?? or can we just
> search
Video Key and other sub Keys inside it??
>
> Need some help on this.
Hi. You can use one of the xtras for registry edition (Buddy
API for
example) and get a build a list with all the content of the
registry�s
path list and then look for the string you want in a repeat
loop.
HTH,
Agust�n Mar�a Rodr�guez
www.onwine.com.ar > Macromedia Director demos & code

Similar Messages

How to find Safari plug-in installed on a specific date?

I posted this question in the wrong community, so am re-posting here.
I want to remove a Safari plug-in. I know how to find the plug-ins that have been installed (Safari > Help > Installed Plug-Ins), but the names of the plug-ins mean nothing to me. I do know, however, when the plug-in (the one that I want to remove) was installed. Is there a way to see the list of installed plug-ins by install date? Thx

Do you back up with Time Machine? If so, scroll back through the snapshots of the plugin folders until you find the most recent change.

How do I create a treepanel that uses a specific path as its root?

I want to create a treepanel which uses a specific path in my /content directory (eg. /content/a/b/c) as it's root node.
If I'm working in CRXDE, how would I set that up?
So far, I created a tab with a tree panel with attributes:
root: /content/a/b/c
xtype: treepanel
This gets me a treepanel with the root node, but it does not open. When I click on the "+" beside it, it only spins. What am I missing in order to set this up?

Hi. I'm having the same issue. Please share with us if you find a solution.
Many thanks.

PT 8.51 Upgrade - How to find duplicate keys for Portal Registry Structure?

I am upgrading peopletools for two applications (CRM 9.00 and FDM 9.00) from the 8.48.10 to 8.51.11 versions.
For CRM, Task 4-15-9 Completing the Peopletools Conversion ran app engine PTUPGCONVERT ran smoothly.
For FDM, I have the following error messages:
The Navigation Pagelet does not exist. Portal = EMPLOYEE. Object = PT_SC_PGT_MAIN_MENU. Collection = PT_PTPP_PORTAL_ROOT (219,2083)
Message Set Number: 219
Message Number: 2083
Message Reason: The Navigation Pagelet does not exist. Portal = EMPLOYEE. Object = PT_SC_PGT_MAIN_MENU. Collection = PT_PTPP_PORTAL_ROOT (219,2083)
Duplicate key. Portal: EMPLOYEE, Obj Name: PT_SC_PGT_MAIN_MENU, Nodename: LOCAL_NODE, URL: s/WEBLIB_PTPP_SC.HOMEPAGE.FieldFormula.IScript_SCP (133,4)
PT_SC_PGT_MAIN_MENU already exists. (96,3)
Copy of the Main Menu Pagelet From PS_SITETEMPLATE to Portal: EMPLOYEE failed. (219,2111)
Message Set Number: 219
Message Number: 2111
Message Reason: Copy of the Main Menu Pagelet From PS_SITETEMPLATE to Portal: EMPLOYEE failed. (219,2111)
I checked table PSPRSMDEFN which does not have an entry for PT_SC_PGT_MAIN_MENU, under the Employee Portal. I tried to migrate the missing Portal Registry object using App Designer but again receive the "duplicate key" error.
So it seems that I have to find the duplicate key and resolve it before I can migrate the missing object.
Anyone know a quick way to figure out what the duplicate keys are?
Thanks

I tried several things to find the duplicates with no success.
A couple of workarounds were attempted that resulted in the same "duplicate key" error, including:
a) Re-copying file project PPLTLS84CUR
b) Copy object 'PT_SC_PGT_MAIN_MENU" from Demo
After opening an SR, the successful workaround was to use Data Mover to export from Demo the "EMPLOYEE" portal entries for "PT_SC_PGT_MAIN_MENU" from tables PSPRSMDEFN, PSPRSMSYSATTR and PSPRSMSYSATTRVL. The import to the target upgrade environment was successful. A re-run of PTUPGCONVERT finished successfully.
The upgrade is progressing but where the duplicate keys are is still a mystery.
Cheers

How to find out which list is associated with specific incoming email address

Hey Guys,
I've a received a request today from a user asking me which list was setup with a specific incoming email address.
Is there a way to find out which list is associated with an email address?
Thanks

OK after a bit of research I found a way to achieve this.
I simply looked up the email address in ADUC, then did a search in SP with the display name. I could locate the list and manually confirm it was configured with the incoming email address I was looking for.
I also found the below script on Stackoverflow, but got "The 'using' keyword is not supported in this version of the language." when I tried to run it. Any idea how to fix that? I'd like to have a script to link a library to an email address istead of the
manual approach described above.
http://stackoverflow.com/questions/4974110/sharepoint-how-do-i-find-a-mail-enabled-list-if-i-only-have-the-email
$SiteCollection = ""
$EmailAddress = "" # only the part before the @
# Load SharePoint module if not done yet
if((Get-PSSnapin | Where {$_.Name -eq "Microsoft.SharePoint.PowerShell"}) -eq $null) {Add-PSSnapin Microsoft.SharePoint.PowerShell;}
cls
using System;
using Microsoft.SharePoint;
namespace FindListByEmail
class Program
{a
static void Main(string[] args)
string siteUrl = $SiteCollection;
string email = $EmailAddress;
using (SPSite site = new SPSite(siteUrl))
foreach (SPWeb web in site.AllWebs)
try
foreach (SPList list in web.Lists)
if (list.CanReceiveEmail)
if (list.EmailAlias != null && list.EmailAlias.Equals(email, StringComparison.InvariantCultureIgnoreCase))
Console.WriteLine("The email belongs to list {0} in web {1}", list.Title, web.Url);
Console.ReadLine();
return;
finally
if (web != null)
web.Dispose();

How to find the id of the node given the path using connect by?

I have a table like this:
CREATE TABLE tab1 (Id INTEGER, Name VARCHAR2(100), ParentId INTEGER)
Let's say I have the following rows:
Id name ParentId
1 X NULL
2 Y 1
3 Z 2
4 A 3
Now, given the path /X/Y/Z/A, I need to return 4
Is it possible to achieve this using CONNECT BY?
If it helps, I have over simplified the scenario - that a node has only one child. In reality, a node can have many children.
Thanks.

Hi,
user2888313 wrote:
Thanks for the suggestions - will follow from now on. Here's one way to post the sample data, given the CREATE TABLE statement you posted earlier:
-- Basic data:
INSERT INTO tab1 (id, name, parentid) VALUES (1, 'X', NULL);
INSERT INTO tab1 (id, name, parentid) VALUES (2, 'Y', 1);
INSERT INTO tab1 (id, name, parentid) VALUES (3, 'Z', 2);
INSERT INTO tab1 (id, name, parentid) VALUES (4, 'A', 3);
-- To test branching (i.e., multiple children for the same parent):
INSERT INTO tab1 (id, name, parentid) VALUES (11, 'P', 1);
INSERT INTO tab1 (id, name, parentid) VALUES (12, 'Q', 1);
INSERT INTO tab1 (id, name, parentid) VALUES (13, 'R', 12);Alternatively, you could post a WITH clause, as someone did above.
I am not clear how to use the LEVEL pseudo column. Should I just start from the root, find all paths up to the level I am looking for? Could you please give me the syntax? Sorry, I'm still not clear what you want, or why you want it.
Do you want 4 because 'A' is the 4th generation in this family tree (that is, because 'A' has 3 ancestors), or do you want 4 because id=4 is on the same row as name='A'? In the former case, use LEVEL; in the latter, use the id column.
This query shows both:
SELECT SYS_CONNECT_BY_PATH (name, '/')          AS name_path
,     LEVEL                                AS lvl
,     id
FROM     tab1
START WITH     parentid     IS NULL
CONNECT BY     parentid     = PRIOR id
;Output from the expanded sample data:
NAME_PATH                   LVL         ID
/X                            1          1
/X/Y                          2          2
/X/Y/Z                        3          3
/X/Y/Z/A                      4          4
/X/P                          2         11
/X/Q                          2         12
/X/Q/R                        3         13

How to find out the total cost of a specific VM

I've downloaded the usage statistics file from billing section and I could see the data categorized by different type of resources consumed by a virtual machine. Eg.
Name ResourceGuid
Unit Consumed
"Virtual Machines" "1b4d8861-8cbc-40c8-88f9-e1b78509c3be"
"GB" 0.000158
"Networking" "9995d93a-7d35-4d3f-9c69-7a7fea447ef4"
"Hours" 11.100002
"Data Management" "964c283a-83a3-4dd4-8baf-59511998fe8b"
"10,000s" 6.8899
"Storage" "0e9d0c9b-ab6d-4312-9c7e-3794e22af9c4"
"GB" 0.436496
I'm looking for a way to retrieve the ResourceGuid of all the resources linked to a particular VM, to find out the total cost of it (VM + Networking + Data Management + Storage)
Is it possible through Service Management API? Or any other means?

Hi,
This issue is related with billing, I would suggest you contact with azure support:
http://www.windowsazure.com/en-us/support/contact/, it is the best choice for you. I find a releated voice, it discusses to display the total fee before created service, here is the link: http://feedback.azure.com/forums/170030-billing/suggestions/6478992-display-total-fee,
please vote it.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to find out if a panel contains a specific component

I am in a situation where i need to know whether a panel contains a specific component or not, like is there a specific method for that.
To clarify, example :
Suppose i have a panel
JPanel p1;
p1 = new JPanel();
JLabel label = new JLabel("LABEL");
p1.add(label);In this code i already know that p1 contains label, however at runtime, i would like to know if p1 contains label or not (assuming i removed the label at some point)

verminator wrote:
I thought that should have done the trick, and maybe it will, but did i do something wrong here :
JPanel p1 = new JPanel();
JLabel l1 = new JLabel("LABEL");
p1.add(l1);
if(isDescendingFrom(l1,p1)) //error here
System.out.println("true");
else
System.out.println("false");
}do you have to import some other package other than javax.swing.SwingUtilities for this method, because i'm getting an error "cannot find symbol" referring to the isDescendingFrom() methodSwingUtilities isn't a package, it's a class. isDescendingFrom() is a static method in that class.
To call isDescendingFrom(), it should look like this:
SwingUtilities.isDescendingFrom(c1, c2);

How to find the database details from server audit specification with successfull login group?

Hi,
We have created a server audit for successfull logins.When we read the audit file using
sys.fn_get_audit_file we find that all the fields related to the databases
ie database_principal_id,database_principal_name,database_name are either 0 or null.
Is there a method to find out to which database the login is accessing from the server
audit specification of successfull login group.Although the logins are reading and writing
data to the databases why there are no details of the databases?
Thanking you in advance,
Binny Mathew

Hello Binny,
The logins are used to connect to the instance and the access to the databases is performed via database users. So, once you connect to the instance via your login, the server level audit takes this action, records it, but without caring to which databases
you want to connect after that.
Unfortunately there is no similar action group on the database audit specifications, that can track which user connected to the DB, except if you are using contained databases in SQL 2012.
Probably you can share why you need such information and if there is something else specific that you wish to achieve, so we can propose a different solution/audit configuration.
Regards,
Ivan
Ivan Donev MCT and MCSE Data Platform

How to find out which batch job generated a specific idoc?

Dear Colleagues
Is it possible to find out which batch job generated a given idoc?

You need to check in the program about the naming conventions for the job. Then based on it you will be able to identify the correct one.
Thanks
Nabheet

How to find old hostname remained in new system after system copy

Hello all,
Let me ask you about changing hostname during system copy.
I've finished homogeneous system copy. I changed its hostname and did not change its SID.
I know we should check and modify RFC destination(SM59), logon group(SMLG), SAPconnect(SCOT), operation mode(SM04) and instance profiles after system copy with changing hostname.
But my customer also used hostname for variant. I overlooked.
Then they require me to provide how to find old hostname in whole system ...
Do you have any good tools or idea? Any advice would be appreciated.
Best regards,
Ikue

Hi,
If u have not deleted the inactive profiles in the tcode RZ10, you can find the old hostname in the instance profile.
Also if u have not deleted the entries in the tables TPFET and TPFHT, u can find the old hostname here in these tables also.
Regards,
Varadharajan M

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

Is it possible to have your whole family on one apple id or is it better to have each person have there own?
Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
If each has their own does each id have to buy their own music and apps?
Yes, all purchases are non-transferable.
How does find my iphone work with one apple id or two?
Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

How to use search/find function in a whole book?

Hi,
New to indesign... working on a book file which comprises 25 chapters.
I'd like to do a final proof to ensure all double spaces have gone, all quote marks are right etc
Instead of opening each chapter and using "search/find" through each chapter, can i tell the "search/find" function through the whole book?
Appreciate any feedback
Thanks heaps

Apparently Adobe thought that would be more appreciated than a book-wide Search/Replace.
You can read all about CS5's new features, and their selection procedure, on http://indesignsecrets.com/michael-ninness-answers-indesign-cs5-critics.php. The "Book" feature doesn't even get mentioned under "Sorry, we didn't change that at all." Also make sure to read the comments -- it seems lots of people really want more book features.
If you're one of them (so it seems), you might want to pay a visit to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How to find the existing START ROUTINEs in Transfer Rules in whole system ?

Hi all,
   How to find the existing Start Routines in Transfer Rules in BW System, please ?
   I know that we could find from the Transfer Rules.
   Is there any way to find instead of looking at Transfer Rules for <b>each</b> InfoSource?
Thanks,
Venkat.

Hi Venkat
You can find it in these tables
RSTRAN
RSUPDROUT
RSAROUT
RSAABAP
RSAABAPINV
Thanks
Tripple k

How to Find out who is login into the Portal.

Hi Friends ,
I have one doubt Now I have one Requirement. i.e.
How many members (users) login in to the Portal?
In what time they login into the portal?
How many times hits the iView in Portal?
Who is last login into the portal?
I have find out these details by using these details I will create one Iview.
How to find these details. By using these details I will created one iView. Kindly let me know.
Could you tell me those
1. Is it creating Portal Activity Report iView in Portal?
2. By using WDJ Application we can create one Application. By using this application we can create iView?
Regards
Vijay Kalluri

Hello Vijay,
If you are interested in a 3rd party application with all the stats you need and more, check out Click Stream by Sweetlets. Easy to download and user friendly with many key reports quickly accessible. It also answers some of the questions you had above a whole lot simpler than anything else out there or any other route you had in mind.
In the very near future Click Stream will also have iView recording to monitor iViews, telling which iViews have been clicked, etc. Also, the one you were looking for, "who the last login into the portal", will soon be added.
Click Stream uses the Usermanagement (UME) API to get more information about the user, groups, roles, LDAP attributes etc. and offers you the ability to use such information for filtering within any report.
Click Stream also uses the PCD API to get information about the pages your users are visiting.
Here are some reviews on the SAP EcoHub from people who have used it: http://ecohub.sdn.sap.com/irj/ecohub/solutions/clickstream
Please just let me know if you have any question or if you are open to test drive Click Stream. We will certainly help as best as we can.
Good luck.

How to find a DWORD in whole registry? (No specific path)

Similar Messages

Maybe you are looking for