How to find a memory and CPU used by a specific concurrent program ?
Dear All ,
How to find a memory and CPU used by a specific concurrent program ?
Thanks.
Hi,
How to find a memory and CPU used by a specific concurrent program ?
Could you please let us can we get the
memory used for a specific concurrent request .
Please refer scripts available at:
Concurrent Manager and program related scripts
Queries : Concurrent Managers/Processes
Thanks &
Best Regards,
Similar Messages
-
How to check the memory and CPU usage on NPU
Hi expert ,
Could you tell me how to check the memory and cpu usage on NPU?
I think ASR1000 has this command (show platform hardware qfp active...) , but I coudn't find the same command on ASR9001.
I checked " show controllers np counters all" command, but I did not find it.
Platform: ASR9001
version: 4.3.2
NP: Tyhoon
Thanks,Hi Kanako,
understand your question, but something like that doesnt exist for the trident/typhoon NPU's for the asr9k.
in fact cpu usage is not really applicable for parallel/serialized hardware forwarders, but mainly the KPI is here
the PPS it handles.
The max pps it can handle is dependent on feature set.
What you could do is measure the rates on the PARSE_FABRIC_RECEIVE count (packets received from fabric, so egress direction), PARSE_ENET_RECEIVE count (packets received from the interface to the fabric, so ingress) and the LOOPBACK count, that is packets that are recirculated for extra processing. The sum of these 3 gives an idea of the PPS rate the NPU is working on.
Memory consumption is something tricky also, there are many memories attached to the NPU, notably:
TCAM used for vlan matching, ACL and QOS matching
Search memory for L2 and L3 (shared on Trident, separated on Typhoon)
Frame memory for packet bufferin in QOS
Stats memory, for all kinds of counters of QOS maps, interface stats etc
their usage is rather dynamic also.
The few things you want to verify on these are:
- ACL usage (in terms of Tcam entries)
- MAC table size (2M max on typhoon)
- FIB size (4M max on typhoon)
frame memory is dependent on the buffering, which is a sum of all the packets instant queue length and size of all pmaps attached to interfaces served by the same NPU. there is no good overview as to how much you have available of that, but it has a rather significant size 1G or 2G depending on the TR or SE cards (typhoon specific).
regards
xander
Xander Thuijs CCIE #6775
Principal Engineer
ASR9000, CRS, NCS6000 & IOS-XR -
How to find the columns and tables used in a stored procedure?
Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBKFor example:
SQL> create or replace
2 procedure p1
3 is
4 cnt number;
5 begin
6 select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2 referenced_name
3 from dba_dependencies
4 where owner = 'SCOTT'
5 and name = 'P1'
6 and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER REFERENCED_NAME
SCOTT EMP
SQL> SY. -
using Windows 7, firefox 15.0.1
This process uses more and more memory and CPU, sometimes there are several of these processes running. If I kill these processes, it doesn't seem to affect the utilization of Firefox. Then the process slowly starts to use more and more memory and CPU all over again.
This happens all the time, every time I use Firefox.I do not have a ComObjects folder under C:\Program Files (x86)\Common Files. That is not part of Firefox.
wscript.exe is a utility included with Windows to run scripts at the system level. It generally is not used by major programs. If update.exe is starting up with Windows, you may be able to find the script that wscript.exe is running using [http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx Autoruns].
It definitely sounds viral. I suggest deleting the update.exe file, although Windows might prevent you from doing that until you kill all related processes. And if you have a persistent infection, the file may be restored or re-downloaded.
It might be easiest to seek assistance from a forum more dedicated to malware cleanups such as the following:
* [http://www.bleepingcomputer.com/forums/forum22.html Virus, Trojan, Spyware, and Malware Removal Logs - BleepingComputer.com]
* [http://forums.majorgeeks.com/forumdisplay.php?f=35 Malware Removal - MajorGeeks Support Forums]
Hope you get it removed. -
How to get alert for app server that experienced high memory and CPU utiliz
Hi
How to get alerts configured and turned u201Conu201D for the app server that experienced high memory and CPU utilization?
And let me know where we can check this?
Regards,
Nenihi,
Have you configured a Central Monitoring System (CEN)? This includes registering the agent on the CEN, starting it and configuring the Central Auto Reactions on CEN using RZ21 transaction.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000000a42189b/frameset.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000000a42189b/frameset.htm]
Jansi -
How much memory and CPU requirement to deploy ADF Faces application ?
Hi All,
Is there any formula or docs to help me to determine how much memory and CPU requirement for IAS server, to deploy ADF Faces application ?
How much memory / CPU GHz required per 1 user ?
We plan to develope web based ERP application using ADF Faces and ADF BC.
Pleasssee.. give me any aclue.. I need it so badly..
Thank you for your help,
xtantoxtanto,
there is no formular for this. Note that it is not only ADF Faces but th emodel layer in particular that adds to this requirement.
Frank -
How to find the font and replace another font using javascript in illustrator?
Dear All,
how to find the font and replace another font using javascript [batch process] in illustrator?
i have 700 image file, it very deficult replace one by one.
regards,
.Suresh.SAsk the creator of the file for a unprotected version.
-
Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit
.from iTunes, go to View > Show sidebar
From sidebar > Itunes Store > Click top left on your Apple ID email address > Account > ...scroll down > Purchase History > View All -
How to find 2 different projects are using which gl accounts and co pa char
Hi ,
There are 2 different project id s , now how to find differences between them regarding using of G/L accounts and required characteristics for the COPA module ?
Thanks & regds
Ramachandrahope you are talking about the value field for COPA.
Please go to the project profile and find out the settlement profile, and from settlement profile find out the PA transfer structure, and check the PA transfer structure for COPA value filed details. -
Hi experts,
My Oracle version is:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production
we have 2 node RAC. my client (WAS) connects to the DB using JDBC and establishes connection with the DB.
Now problems is coming that my RAC memory on both the nodes gets fully consumed and CPU utilisation is also very high.
We are using proxy login in our application connection. which means that connection to the DB will be created with a schema(User) and after that Proxy session will be established for a particular user. So for a request we have two session. The main session which we had will schema user becomes inactive and proxy session becomes active.
So this way we have 2 sessions for a request which is not wrong but memory and CPU utilisation are bottlenecked.
Can anyone tell what is the minimum memery that a connection takes even if its idle or inactive.
Regards,
VikasJDBC 'applications' quite often don't use persistent connections, and often do not exit gracefully by calling 'exit' or 'disconnect'.
This means the session will continue to exist.
It also means, if you don't establish any form of connection pooling and/or dead connection detection, you can throw whatever amount of memory in the server, and you will continue to report
'Now problems is coming'. Apart from crippled English, the general lesson any DBA should know is how these 'applications' operate, and, contrary to some, you can never ever fight problems caused by applications,
by throwing memory and cpu at the problem.
When I read your text, I also assume the application is not using PrepareStatement calls and not using bindvariables, this is why your 'application' is burning the CPU.
Find those 'application developers', sue them, or better still : Beat them with a whip, and have them fix their 'crapplication'.
Paraphrasing William Jefferson Clinton: It's the application, stupid!
Sybrand Bakker
Senior Oracle DBA -
Can we control user request w.r.t Memory and CPU utilization in Oracle 10g
Dear All,
We are having Production with Oracle 10.2.0.4 (5 Node RAC, 32Gb RAM each) running on RHEL5.2 with 12000 Users. We have some schema say FIN, HRMS, SALES, REPORT and many dedicated users for those schemas. We need to control the user request against these schema with respect to Memory (or CPU utilization)
Suppose users using FIN schema can use Maximum 40 % of Total Memory, HRMS schema can use Max 20%, SALES can use Max 20% and REPORT can use Max 20%.
Is it possible to create any Service in Server side to handle this type of scenareo or any existing service which can be customised to fullfil this?
Please suggest me.......
Thanks,
Tusar
Edited by: gohappy on Jan 27, 2011 5:59 AM
Edited by: gohappy on Jan 27, 2011 6:00 AMJDBC 'applications' quite often don't use persistent connections, and often do not exit gracefully by calling 'exit' or 'disconnect'.
This means the session will continue to exist.
It also means, if you don't establish any form of connection pooling and/or dead connection detection, you can throw whatever amount of memory in the server, and you will continue to report
'Now problems is coming'. Apart from crippled English, the general lesson any DBA should know is how these 'applications' operate, and, contrary to some, you can never ever fight problems caused by applications,
by throwing memory and cpu at the problem.
When I read your text, I also assume the application is not using PrepareStatement calls and not using bindvariables, this is why your 'application' is burning the CPU.
Find those 'application developers', sue them, or better still : Beat them with a whip, and have them fix their 'crapplication'.
Paraphrasing William Jefferson Clinton: It's the application, stupid!
Sybrand Bakker
Senior Oracle DBA -
How to find BADI Defination and Implemantation from Method of BADI?
HI,
can anyone tell me that how to find BADI Defination and Implemantation from Method of BADI?& Report ZPJA_PM002 (V2) &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 158.
*tables: enlfdir. "Additional Attributes for Function Modules
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(40) type c,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: '
p_tcode."#EC NOTEXT
stop.
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode.
"#EC NOTEXT
stop.
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
WITH ANALYSIS.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
if p_devc = 'X'.
loop at i_fmodule.
clear: wa_tadir, wa_enlfdir.
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
check not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
i_fmodule-done = 'X'.
modify i_fmodule.
endloop.
sort i_devclass.
delete adjacent duplicates from i_devclass.
endif.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into
w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IF_'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name =
wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(40) c_col5, "Enhancement description
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(40),
sy-vline.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC
*NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
reward points if it helps
gunjan -
How to find out which keywords were used to create a smart album?
Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown. -
How to find out names of reports using a particular view
hi guys,
i am newbie here, i jsut want to know how to find out which reports are using a particular view
many thanks in advance for your helpIf you go to the Properties for the Folder in Discoverer Administrator, there is a Dependents tab that should list any workbooks using the folder. This only works for workbooks saved to the database, so won't help with any created using Discoverer Desktop. If you are gathering statistics and have the The Discoverer V5 EUL business area and its workbooks installed, it can tell you about Folders Used as well. It contains information about queries run whether the workbook is saved to the database or to the file system, but wouldn't contain inforamation about workbooks that had been created but not run.
-
How to find out if I am using a 32 bits or 64 bits version of JRE?
How to find out if I am using a 32 bits or 64 bits version of JRE?
If I have 2 instances of Java installed in 2 seperate directories, one 32 bits and other 64 bits on Linux. How do I identify which directory holds which version?
Is there any command that can output this info?
Regards,
BillamamaWith a Sun JDK or JRE, you can use java -version:
$ java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) Server VM (build 1.6.0-b105, mixed mode)
... switch to the 64-bit JDK ...
$ java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0-b105, mixed mode)
The last line says "64-Bit."
Maybe you are looking for
-
Import database from Linux to Windows fails with creating tablespaces
Using (Oracle10g/Linux) user/schema (i think)"Sys" i exported succesfully full database and produced a log file which looks like this: Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production With the Partitioning, O
-
Connect WDNR3700 to Airport Express
I use an Netgear WDNR3700 router (from my DSL line), recently my Netgear Extender died and I just bought the Airport Express. I went through the setup and the green light is on and said it connected to my WDNR3700 wirelessly, but I cannot see the Ai
-
Import to iPhoto and photos get deleted instead of stored
I import my photos to iPhoto, they appear that they are downloaded. I close iPhoto and reopen and they are deleted while event remains only it is empty.
-
I created a new Cinema 4D scene from within After Effects and discovered that I couldn't make the output resolution larger than 800 x 600. In the rende settings window I get the message: "Image Resolution: 800 x 600 Pixel - Application license limit
-
Converting *.doc files to *.swf files
I PURCHASED FLASHPAPER 2 SOME YEARS BACK TO CONVERT STATIC WINDOWS *.DOC FILES TO *.SWF FILES TO UPLOAD ONTO A WEBSITE. I RECENTLY BOUGHT A NEW COMPUTER WITH WINDOWS VISTA. FLASHPAPER 2 DOES NOT WORK ON VISTA. I WAS INFORMED BY ADOBE THAT FLASH CS3 C