How to find exact motherboard model for Satellite P100-347?

Hello,
I am hoping someone could help me. I am looking for a new motherboard for my toshiba laptop as it needs replaced.
I own a pspa6e-03302cen Satellite P100-347 laptop and have not been able to find this board online anywhere. Although I have found two suppliers of many p100 motherboards they use alternate model numbers in which I cannot find anywhere in my documentation or on the actual computer. The model numbers they use are something like A000008350 or a number starting with k. I am pretty sure the supplier i have found has the motherboard i would need but i would need a list of all the alternate part numbers for my laptop or someway of finding the exact numbers. Any help on this matter is appreciated..
Thanks

To be honest I really do not believe someone here can offer you such info. As you know this info is for internal use and you can try to get this info from authorized service provider in your country. Sorry but I do not see better solution, except to wait here and hope someone can help.
Good luck!

Similar Messages

  • Where can I find new display drivers for Satellite P100

    Hello,
    i need new display drivers for my Notebook (Satellite P100), but it's only Version 84.0 to download.
    I need version 162.0 or higher.
    On Nvidia Web-Site is the new 167.0 beta, but does it work with my system?

    The Toshiba graphic drivers on the Toshiba European driver page are not the same like the original graphic driver from the graphic card manufacturers.
    Therefore you cannot compare the driver version numbers!
    Generally the graphic driver which appears on the Toshiba page is the newest Toshiba driver.
    Best regards

  • How to install OS on my new Satellite P100-347?

    Hi!
    I just purchased a P100-347 last friday. This was the last laptop of its kind in the shop where I bought it and as so I end up with a display model.
    No problems with that, the laptop is in very good condition, the only problem is that whenever they took it from the display they re-installed the operating system and so they add some password to the administrator account (which in XP is created whenever the OS is installed).
    I contacted the shop to request the password and they say they dont know (or they just dont want to give it out...).
    What should I do now?? Format the disk and run the Toshiba recovery cd to re-install the OS?? Is the OS included on the product recovery cd?? If I re-install the OS, can I give a new password?
    Thank you.

    Hello Tiago
    The best thing you can do is to install OS again. For doing this please use delivered recovery DVD. Recovery DVD contains operating system, all necessary drivers and of course all Toshiba designed tools and utilities.
    After doing this your notebook will have factory settings again and you can configure OS and set your own password.
    If you need some assistance please write again.
    Bye

  • How to find all WXP drivers for Satellite A100 (PSAAR)?

    I have Windows Vista, but i want return to Windows XP, i can install the operating sistem, but i need drivers for my notebook model, i have try to see in the site but i haven't find.
    Someone can help plz ??
    I need in italian if possible:
    - Acoustic Silencer
    - Assist
    - Bluetooth Monitor
    - Config Free
    - Display Driver
    - Fingerprint software
    - Flash Media Driver
    - Hardware setup
    - Installation Istructions
    - Modem Driver
    - Quick Fix Engineering
    - SD Utilities
    - Sound Driver
    - Supervisor Password Utility
    - Tiles for Mobility Center
    - Touch Pad Driver
    - Value Added Package
    - Wireless Lan Driver
    - Online Product Information
    Help me plz, thx so much :-)
    Message was edited by: Gianni 81

    Hello
    Check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21157&messageID=77972
    Maybe it will help you to install WXP and use right Toshiba designed tools and utilities.
    Good luck!

  • Satellite P100-347 - nVidia drivers up to date?

    Can Toshiba support please fix some up to date vista drivers for:
    Satellite P100-347...(pspa6e)
    this should be up to date at Toshiba`s homepage, because the drivers on
    nvidia.com don`t work on my Toshiba notebook....
    Thnx

    It is well known that drivers downloaded from graphic card manufacturers support pages cannot be installed on mobile computers. Every notebook manufacturer must be sure that display driver will work well on specific notebook model and will not force graphic card to run on maximum level.
    I hope you can understand why notebook manufacturers do this.
    Anyway you can just hope that your message will be read by Toshiba support department. ;)

  • How  to   find  article based  support  for  ipad  or  technical notes

    how  to   find  article based  support  for  ipad  or  technical notes

    The problem comes from VBUK/VBUP which are the control tables for most of SD tables (from VBAK/P to LIKP/PS and VBRK/P) and manage uniqueness of id in the module (and stores statuses). Even item tables don't refer to their header but both refer to the same VBUK record.
    e.g.
    LIPS : VBELN/POSNR -> VBUK/VBUP -> but you will only find LIKP/PS itself and no record in VBAK/VBAP
    LIPS : VBELV/POSNV -> VBUK/VBUP -> you should find VBAK/VBAP
    The table VBFA "Sales Document Flow" manages the relations from/to between two different SD documents which exist in VBUL/P and in only one other table depending on type of document. (Also note that the exact relationship may sometimes be modified to some extent by Customizing SD.)
    As Katan wrote, look for views defined in ddic, look also at logical databases (SE36) like VLV.
    You can also find valuable information in OSS notes/documents like 185530 - Performance: Customer developments in SD.
    Regards,
    Raymond

  • How to find next number range for project definition in tcode CJ20N

    Hai Experts,
          Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
    Note: I searched in forum before posting, but couldn't find the solution.
    Thanks
    Regards,
    Prabu S.

    Hi,
    For project defination internal number is assigned by system.
    When you saves's project then system allocate one number to project defination, you can view it,
    SE11 >>> table  PROJ >> Click on contents >>> execute,
    here you will get your project defination & number is assigned to project defination.
    kapil

  • How to find classtype and class for a material.

    Hi,
    How to find classtype and class for a material.
    which table contains this data.
    Thanks
    Kiran

    Hi Kiran,
    Check below sample code. Use this BAPI which will give all info about the class for the material.
      DATA:      l_objectkey_imp    TYPE bapi1003_key-object
                                         VALUE IS INITIAL.
      CONSTANTS: lc_objecttable_imp TYPE bapi1003_key-objecttable
                                         VALUE 'MARA',
                 lc_classtype_imp   TYPE bapi1003_key-classtype
                                         VALUE '001',
                 lc_freight_class   TYPE bapi1003_alloc_list-classnum
                                         VALUE 'FREIGHT_CLASS',
                 lc_e               TYPE bapiret2-type VALUE 'E',
                 lc_p(1)            TYPE c             VALUE 'P',
                 lc_m(1)            TYPE c             VALUE 'M'.
      SORT i_deliverydata BY vbeln posnr matnr.
      CLEAR wa_deliverydata.
      LOOP AT i_deliverydata INTO wa_deliverydata.
        REFRESH: i_alloclist[],
                 i_return[].
        CLEAR:   l_objectkey_imp.
        l_objectkey_imp = wa_deliverydata-matnr.
    *Get classes and characteristics
        CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
          EXPORTING
            objectkey_imp         = l_objectkey_imp
            objecttable_imp       = lc_objecttable_imp
            classtype_imp         = lc_classtype_imp
    *   READ_VALUATIONS       =
            keydate               = sy-datum
            language              = sy-langu
          TABLES
            alloclist             = i_alloclist
    *   ALLOCVALUESCHAR       =
    *   ALLOCVALUESCURR       =
    *   ALLOCVALUESNUM        =
            return                = i_return
    Thanks,
    Vinod.

  • Cannot find Windows Vista 32bit Drivers for my Satellite P100-347

    Hi,
    I did a fresh installation of Vista Ultimate 32-bit on my Satellite P100-347 and on going to the driver download page, the vista drivers are no longer there!
    Unfortunately without those drivers the laptop's performance isn't optimum. Does this mean Toshiba doesn't support my laptop model anymore? I hope not!
    Could someone please point me in the correct direction!

    Someone posted, that it may be server maintenance. I found a couple of posts asking for the same.

  • How to find out the Tcodes for the exits

    Hi All,
    how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
    Customer Exits: EXIT_RFEBBU10_001
                              EXIT_RFEKA400_001
                              EXIT_RFFOEXIT_100
    User-Exits:  USEREXIT_DELETE_DOCUMENT
                       USEREXIT_FIELD_MODIFICATION
                       USEREXIT_MOVE_FIELD_TO_VBAK
                       USEREXIT_PRICING_PREPARE_TKOMP
    BADI: CUSTOMER_ADD_DATA_CS
              HISTORICAL_VALUES
              MD_ADD_ELEMENTS
              MD_CHANGE_MRP_DATA
              MD_PIR_FLEX_CONS
              MD_PLDORD_POST
              ME_REQ_POSTED
              NOTIF_EVENT_SAVE
    Can anyone help on this <urgency factor removed>.
    Regards
    Ksihore
    Edited by: Suhas Saha on Feb 20, 2012 12:58 PM

    i have just started reading about all these-user exits ,customer exits etc.
    i have read somewhere that:call to customer exits are triggered by function modules exits.
    the structure of function modules are like this:
    EXIT_RFEBBU10_001
    MEANS
    Keyword EXIT followed by program name fllowed by three digits.
    and the call is like this:
    call customer function 0001.
    From above we can conclude that this customer exit must be used in program RFEBBU10.
    GOTO SE38 andenter prog name RFEBBU10.check for above function module.
    for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
    using Where used lists.
    please Tell me if i m wrong!

  • How to  find the user exit for a screen..

    Hi,
    plz help me how to find the user exit for a screen..?
    Regards
    Anbu

    Hi,
    check this program this will give you the list of user-exit and BADI for the perticular Tcode.
    REPORT  zuserexit_badi.
    TABLES : tstc,
    tadir,
    modsapt,
    modact,
    trdir,
    tfdir,
    enlfdir,
    sxs_attrt ,
    tstct.
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    PARAMETERS : p_tcode LIKE tstc-tcode,
    p_pgmna LIKE tstc-pgmna .
    DATA wa_tadir TYPE tadir.
    START-OF-SELECTION.
      IF NOT p_tcode IS INITIAL.
        SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
      ELSEIF NOT p_pgmna IS INITIAL.
        tstc-pgmna = p_pgmna.
      ENDIF.
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'PROG'
        AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
          WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
            WHERE pgmid = 'R3TR'
            AND object = 'FUGR'
            AND obj_name EQ enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
        SELECT * FROM tadir INTO TABLE jtab
        WHERE pgmid = 'R3TR'
        AND object IN ('SMOD', 'SXSD')
        AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(105) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
          SORT jtab BY object.
          DATA : wf_txt(60) TYPE c,
          wf_smod TYPE i ,
          wf_badi TYPE i ,
          wf_object2(30) TYPE c.
          CLEAR : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
          LOOP AT jtab INTO wa_tadir.
            AT FIRST.
              FORMAT COLOR COL_HEADING INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 'Enhancement/ Business Add-in',
              41 sy-vline ,
              42 'Description',
              105 sy-vline.
              WRITE:/(105) sy-uline.
            ENDAT.
            CLEAR wf_txt.
            AT NEW object.
              IF wa_tadir-object = 'SMOD'.
                wf_object2 = 'Enhancement' .
              ELSEIF wa_tadir-object = 'SXSD'.
                wf_object2 = ' Business Add-in'.
              ENDIF.
              FORMAT COLOR COL_GROUP INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 wf_object2,
              105 sy-vline.
            ENDAT.
            CASE wa_tadir-object.
              WHEN 'SMOD'.
                wf_smod = wf_smod + 1.
                SELECT SINGLE modtext INTO wf_txt
                FROM modsapt
                WHERE sprsl = sy-langu
                AND name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
              WHEN 'SXSD'.
    For BADis
                wf_badi = wf_badi + 1 .
                SELECT SINGLE text INTO wf_txt
                FROM sxs_attrt
                WHERE sprsl = sy-langu
                AND exit_name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED ON.
            ENDCASE.
            WRITE:/1 sy-vline,
            2 wa_tadir-obj_name HOTSPOT ON,
            41 sy-vline ,
            42 wf_txt,
            105 sy-vline.
            AT END OF object.
              WRITE : /(105) sy-uline.
            ENDAT.
          ENDLOOP.
          WRITE:/(105) sy-uline.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No.of Exits:' , wf_smod.
          WRITE:/ 'No.of BADis:' , wf_badi.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(105) 'No userexits or BADis exist'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(105) 'Transaction does not exist'.
      ENDIF.
    AT LINE-SELECTION.
      DATA : wf_object TYPE tadir-object.
      CLEAR wf_object.
      GET CURSOR FIELD field1.
      CHECK field1(8) EQ 'WA_TADIR'.
      READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
      MOVE jtab-object TO wf_object.
      CASE wf_object.
        WHEN 'SMOD'.
          SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
          CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
        WHEN 'SXSD'.
          SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
          CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
      ENDCASE.
    Reagards,
    Bharat.

  • How to find out the description for the given field?

    Hi All,
    How to find out the description for the given field?
    I mean ETTYP  Desription is VTEXT. This we can find in TVEPT  Table. So, How canwe find this?
    Thanks in Advance
    Sri...

    Hi  Avi,
    If i want to disply the  fields like   AUART and 'Description of AUART',
    Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
    my question is if i have given T184-AUART  and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
    Thanks in Advance
    Sri...

  • URGENT: How to find out the Tables for Routines  in BW.

    Hi BW Gurus,
    How to find out the Tables for Routines  in BW.
    I have this routine id <b>45XFAEI7LKIFIRDUKQG127YWW</b> and it is in inactive state and i want to activate it.
    thanks in advance,
    points will be rewarded.
    Regards,
    Maruthi.

    Hi Maruthi,
    Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
    Cheers,
    Praveen.

  • How to find out the link for the tables for sub contract PO

    Dear All,
    How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
    Please provide the solution for the Table related to ABAP.
    Thanks,
    V.V.

    Hi,
       Make use of the table EKKO, EKPO...
    For subcontract please select the option in EKPO-PSTYP.
    Regards
    GK.

  • How to find the text id for the text in the sales order

    Hi all,
    How to find the text id for the item-text in the sales order?
    There are different Text available in  the sales order under item like Warehouse instruction, CSR instruction...
    I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
    Table TTXID contains the validation of the Text id.
    Please help me in knowing the way to identify the text-id from the text list..
    Thanks foryour help
    Suresh Kumar

    U can fetch the texts for the items using
    Read_text.
    Example:
        g_f_tdname = xvttp-vbeln.
        g_f_obj = p_obj.
        g_f_langu = 'DE'.
        REFRESH g_t_lines.
        CLEAR g_t_lines.
        CALL FUNCTION 'READ_TEXT'
             EXPORTING
                  id                      = p_var
                  language                = g_f_langu
                  name                    = g_f_tdname
                  object                  = g_f_obj
             TABLES
                  lines                   = g_t_lines
             EXCEPTIONS
                  id                      = 1
                  language                = 2
                  name                    = 3
                  not_found               = 4
                  object                  = 5
                  reference_check         = 6
                  wrong_access_to_archive = 7
                  OTHERS                  = 8.
        IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    The Required fields are,
    Text-id ,language,name,object.
    Let me know if you further require help.
    Regards

Maybe you are looking for

  • My licensed copy of Adobe Acrobat Pro 9.0 will not load

    My licensed copy of Adobe Acrobat Pro 9.0 will not load - the disk just isn't recognized by our drives any longer. How do I get a replacement disk?  BTW - Adobe support seems to be the worst I've ever experienced from any single company. I am getting

  • IPod Showing Up As Removable Disk Even When Disk Use is Disabled

    Hi there, I'm having a problem with my iPod and Vista. My iPod is showing up as a removable disk even though I do not have "Enable Disk Use" checked. This is confirmed by the fact that I can disconnect my iPod without having to eject it first. I've t

  • SAX Transformation

    Hi, I have a problem with creating a SAX Parser on the PI 7.1 server. I get the following error in the log when I test the code in the repository and in the message flow.  com.sap.aii.ib.server.mapping.execution.jaxpfactories.MappingTransformerFactor

  • Transaction Code Search by Keyword

    Is there any way to search for appropriate transaction codes by keyword search without knowing any transaction codes? For e.g. type: Display Report or Display Table and not know the transaction code for that? I already know about Tables: TSTC and TST

  • Gmail Synchronization Issues

    I am having a problem with mail merges via ACT! 2014 and Outlook shutting down periodically. I am also having an issue of gmail incoming emails properly synchronizing with Outlook daily. Some emails sync while others do not. Please help!