How to find if a program really exists in the system?

Hi,
I want to find the existing programs in the system by an abap program. Which table should I use? TADIR or TRDIR? I have seen that there can be cases like a program doesn't exist in the system (se38 says so) but there is an entry in TADIR table.
What about trdir? Should I use TRDIR?
Thanks in advance..
MERAL

Thanks for your replies but my main problem is :
" I have seen that there can be cases like a program doesn't exist in the system (se38 says so) but there is an entry in TADIR table." .
In order to find an abap program really exists in the system, I plan to look at both tables, tadir and trdir, and if I find the program in both tables, I will decide that it really exists.
Is it a right approach? What do you think?

Similar Messages

How to find indirect evaluation wage types exist in the system

Hi Experts,
How can we find indirect evaluation wage types exist in the system ( including customer wage type).
Thanks in Advance.
Regards,
IFF

Hi,
All indirect SAP defined wage types starts with " / " (slash).
Indirect Cm wage types will be the name defined as per by the cm but should not start with slash..
Copy the SAP defined and use them.
Regards
Nima

So someone took my ipod 4g and who ever took it turned it off and i dont know how to find it and i really want it back, what should i do?

so someone took my ipod 4g and who ever took it turned it off and i dont know how to find it and i really want it back, what should i do?

lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

How to find out report program for a particular smartform?

Hi,
How to find out report program from which the smart form function module is calling?
Thanks.

Hi
There's no tools to do that, u can only find out the program where a string with the name of your smartform is: probably it'll be your program.
U can try to use the program RPR_ABAP_SOURCE_SCAN in order to looking for a string a abap program.
But if the name of smartform is transfer to program dinamycally, u've few chances.
Max

How to find most cost-effective fwdg agent at the time of shipment creation

Dear Friends,
I have a requirement of realizing the best cost effective transporter(forwarding agent) in the shipment document. Then how to do using the Transportation functionality of the ERP?
There is a scenerio like I want to transport my goods from L to M. In system say i have a route XX for that, which gets automatically determined in the shipment document.
Now on route XX, if i have 5 operative transportors, say A, B, C, D, E.
Transporter A - provides services km-wise, kg-wise, fixed price as well as truck wise
(Say if you opt for km-wise, charges are 15 rs/km, 10 rs/kg, fixed price of 15000 for full truck from A to B)
Transporter B - Similar to Transporter A with different charges
(Say if you opt for km-wise, charges are 18 rs/km, 7 rs/kg, fixed price of 14500 for full truck from A to B)
Similarly other tranporters also have their charges.
and Now at the time of shipment creation, how can i have some standard method, so that the system suggest the most cost effective transportor for my delivery ie. shipment i want to make or probabaly if there is some standard way to get the list of all available transporters on a given route at the time of shipement creation.
Please suggest.
Regards,
Dipti.

Hi Sandeepan,
Thanx for ur reply.
As per my requirement, there might be say 100 routes existing into the system and each route might have say 10 different transportors available. Now they want to know 1) the list of transportors available on the given route - (run time at the time of shipment creation) to be put into the forwarding agent field 2) Of the available (say 10 transportors) who will be the best/cheapest.
As per your suggestion, the functionality helps after we put in the fwdg agent and then estimate his associated cost. But as in this case, since there are so many routes (associated so many transportors) they will not know whom to put in the field.
Hence want to know if there is some standard functionality of SAP which might help us i) identifying the list of transportors on a particular route or a given criteria - run-time ii) How to find the best among available OR i) SAP Directly suggesting the one and best transportor available on a given route.
Please help.
Regards,
Dipti.

How can I tell if programs are running in the background.

iPod touch version 4.2.1, how can I tell if programs are running in the background. Battery is dead quickly and time/date reverts to Dec 31, 1969. can see thin silver frame around screen like something is running in background.

You really can't tell unless you hear music or similar. Many are always listening for notifications and other things.
To preserve battery life see the following:
Apple - Batteries - iPod
I leave mine in airplane mode when sleeping.

How to find Installation Number in R3 to create Technical system in XI.

Hi,
how to find Installation Number in R3 to create Technical system in XI. can you please help me out.
thanks
siva.

Hi Siva,
Host name you can find at same location. Not sure about message server port (Basis team shall be able to provide this information)....
However there is a very simple way fo creating technical system..
Check out this Michals blog...its very easy
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
Nilesh

How to find a concurrent request's responsibility of the FND user

How to find a concurrent request's responsibility of the OA user who submitted?
For example, I have a concurrent request id: 123, I know user A submitted,
I want to know user A's Responsibility when submitting the request id: 123.
Thanks

Hi,
I'm not sure about this, but can you check whether FND_CONCURRENT_REQUESTS.RESPONSIBILITY_ID provides you with the RESPONSIBILITY_ID of the user from which the request is triggered ? If yes, joining this with FND_RESPONSIBILITY_VL.RESPONSIBILITY_NAME can give you the name of the executing responsibility.
Regards,
Rakesh.

How to check if a user exists in the system ?

Dear Gurus,
I want to check whether a user ID exists in the system after logon by using VBA. If the user ID exists, then I will update the user's information with external data by using the method user.change.
When running below codes, error occurs and error msg is: "The persistent key for an business object instance of type USER has not been set. Cannot invoke method EXISTENCECHECK"
How can I do to check the user ID existence ?
Set oUser = oBAPICtrl.GetSapObject("user")
oUser.ExistenceCheck "MyUserID", return:=oReturn
Thanks and Regards,
Bao Yan

Mickey,
I'm afraid I never did get this to work properly. However, in the way of all bad/good (delete as appropriate) programmers eveywhere I worked around this problem. I was using this code in Banner.asp to change the view based on the user group so if a given session variable was set a user would see a different view. It works fine with no slow down on the page and you should be able to adapt it to what you need.
Hope this helps.
Neville
Note: Application variables are ones I have defined in config.xml.
Code follows:

<% 'NAH 29/03/2004 ' 'This check the to see if the current user has the group in their membership that has been defined as the group to provide an alternative view of the portal.' 'The group variable is defined in the config.xml as "ALTVIEWGROUP"'
'Do not do this is we have already matched the group'If Session("groupMatch") <> "1" and Session("groupMatch") <> "2" then
Dim pGroup
pGroup = Application("ALTVIEWGROUP") Set Session("groupMatch") = nothing
Dim Plumtree
Set Plumtree = Server.CreateObject("ADODB.Recordset") Plumtree.ActiveConnection = "Driver={SQL Server};Server=" & Application("DBSERVER") & ";Database=" & Application("PLUMTREEDB") & ";" Plumtree.Source = "SELECT GROUPID FROM " & Application("PLUMTREEDBUSER") & ".PTGROUPMEMBERSHIP WHERE (USERID = " & strUserID & ") AND (GROUPID = " & pGroup & ")" Plumtree.CursorType = 3 Plumtree.CursorLocation = 2 Plumtree.LockType = 1 Plumtree.Open()
'If there are records we should have a match otherwise set the session varible to no match.' If Plumtree.EOF then Session("groupMatch") = "2" Else 'By getting here the user should have the matching group but complete one final check to make sure' If cInt(Plumtree.Fields.Item("GROUPID").Value) = cInt(pGroup) then Session("groupMatch") = "1" Else Session("groupMatch") = "2" End If
End If
Plumtree.Close() Set Plumtree = Nothing
End if%>

How to find a user who created message in satelite system ?

hi all,
Does anybody know how to find a user who created message in satelite system, but when there is no business partner created for him in Solman ? In tx crm_dno_monitro, crmd_order or dnotifwl there isn`t any information. Is there any Tx or something where i can check it ?
Regards,
M.

Hi,
BP should ne maintained for the user in satellite system as a identification in solman system.
how you are trying to create a message in satellite system..
if you are using help-> create support message then, you can get the message log details on the table BCOS_PROT.
please update us
Thanks,
Jansi
Edited by: shivjansi on Jan 25, 2012 7:44 PM

HT1338 Can anyone tell me how to find what OS I'm using on the Mac? Tiger or Leopard? Also, how do I update from 10.6.8 to the latest version?

Can anyone tell me how to find what OS I'm using on the Mac?
Tiger or Leopard?
Also, how do I update from 10.6.8 to the latest version?

Go to the Apple menu and select "About This Mac". You will get a window similar to this one -
You current OS X version number will be shown as I've marked.
OS X 10.4.x is Tiger, 10.5.x is Leopard, 10.6.x is Snow Leopard, 10.7.x is Lion, and 10.8.x is Mountain Lion.
Whether or not you can go to the latest OS X version depends upon your hardware -
You will need to purchase the retail set for the OS X version you want; there is no pint in getting and installing any intermediate versions. Once the retail version has been installed, you can update it to the latest release for that version via download updater.

How to find out query name using Elements of the query builder.

Hi SDNers,
how to find out query name using Elements of the query .
thanks,
satyaa

Hi,
For having a look at the relation between BEx tables,check the link below:
http://wiki.sdn.sap.com/wiki/display/BI/ExploretherelationbetweenBEx+Tables
-Vikram

How to validate multiple lines which is exist in the form builder at the same session

Hi All,
we are working on oracle Forms personalization to trigger the message at the point of saving multiple lines rather than requiring each line to be save individually. Currently the oracle form is allowing to user to enter two distinct lines that have same resource and basis type in BOM.
Currently the Oracle form is allowing to enter the duplicate combination and not giving any error message even we enter the same combination of data.
As per the customer requirement, they don’t want to validate the data while creating the records but when they try to save the form, in that case it should validate all the records at a time then need to display the appropriate message.
Customer don’t want to customize the Oracle standard form. Here we have only option to use form personalization or through custom.pll.
Any idea on how to validate multiple lines which is exist in the form builder at the same session as before inserting the record itself need to perform the validations for all the records.
Thanks for your help in this regard.
Regards,
Thirupathi

you can write a post script which will do the necessary tasks.
I mean, once you are done with inserting records into these tables, exeute another procedure which will insert these "extra" records, based on some logic.
you may not be able use DB trigger as it may generate mutating error or if you don't write it carefully, it will go into recursive loops as you are refering to same tables.
HTH

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

You can see which apps are open and/or recently used by double-clicking the home button to bring up the taskbar at the bottom of the screen (not all apps that appear there are active) - you can then close apps on it by pressing and holding one of them for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. If you have an app 'open' on-screen then it won't appear on the taskbar, you will need to go back to the homescreen first, and it should then show when you next open the taskbar.
If you haven't already got a copy then you can download the iPad manual from here : http://support.apple.com/manuals/#ipad

How to find bpel instance in 11g based on the index values

We have 10g BPEL process where we define 4 index values for all the instances. Whenever support request comes, we ask index values and based on that we search the process instance.
We have migrated this 10g bpel process to 11g now. How to find bpel instance in 11g based on the index values ???

I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???

How to find if a program really exists in the system?

Similar Messages

Maybe you are looking for