How to find link between the field (kzbew) mvt.ind. and the (ebeln) ?

Hi all,
while finding the link between the kzbew and the ebeln the only table i found is MSEG.
But i want to populate the data in this table only?
So please give me the solution how i can fetch the movement indicator for a particular purchase order?
As i am using the idoc segment MBGMCR02((for creating goods receipt)...i have to pass the movt. indicator with the movement type also.......?

the field - description in MSEG says:
Movement Indicator
Specifies the type of document (such as purchase order or delivery note) that constitutes the basis for the Movement.
Use
This indicator is necessary, for example, to enable a distinction to be made between a goods receipt for a purchase order and a goods receipt for a production order. These two goods movements result in different data
and account updates in the system.
Dependencies
The movement indicator is derived from the transaction code.
what transaction do you want to use for your idoc?

Similar Messages

How to find link between Business partner and Org unit in Solution manager

Hi experts,
Please!!!
I have a requirement where my rule finds business partner assinged for that support team and in transaction ppoma_crm we have org unit assigned to that business partner number below that we have positions and user assigned...
I can find business partner for the transaction now i need to find the org unit for the assigned business partner so i could use for agent determination in workflow.
Thanks and Regards
Annamalai

do you know? ... the structure is like this... i have orgunit then a position to it and then i have assigned a business partner which is with prefix CP... i m not seeing the users assigned to it so my workflow doesnt get triggered if i use this org unit..
regards

Find Link between Field, Segment, Idoc

Hi Experts
I would like to know how to find link between IDoc, Segment and Fileds.
For Example : I know field Name Then i wild like to know Which Idoc and segment contain this field name.
Thanks in advance,
Jaykumar.M.

Hi Jayakumar,
I think this is the same old question on how to find out in what tables a field may be used.
Segments are DDIC structures. A where-used-list on the data element of the field (eventually with some restrictions on the resulting objects name) should show the segments where is is used. The you can check table EDISEG recursively.
Regards,
Clemens

Beginner advise needed on how to find link for app on ipad.

I am an absolute beginner with a recently purchased ipad 2. I have just purchased garageband from the app store but how do I open it? There is no link on my ipad anywhere but when i check settings it says that garageband is installed. Can someone please advise me on how to find link or am i missing somethng really obvious here, cheers.

Look for the Garage Band icon on one of your home screens. Tap on it in order to launch it. Swipe from one screen to the next (swipe to the left with your finger) if you do not see it on the first screen.
If you still can't find it - swipe to the right from your very first home screen and a search feature appears on the screen. Type Garage Band in the text field and search for the app.

How to clear the fields within copy routines in the copy contorl

HI Gurus,
I need to clear the fields VBP-VBELV and VBAP-PSSNV within the copy routines 303 in the copy control between quote item and sales order item. I am not sure how to do that... Can some body please help.
This is required because we had sales order and quote using the same requirement type which controls the special stock indicator. This leads to the stock getting update in quotation instead of the sales order, because the quotation is initiating document (collecting all cost etc).Now i know requirement should only be passed to production from sales order and not from quotation so i changed the config but there are some existing documents using same requirement type on both quotation and sales order and to correct those i need to clear fields VBP-VBELV and VBAP-PSSNV within the copy routines 303.
Please help!
Regards,
Sam

Hi ,
just use this code in ur save button action handler , this will clear the field after entered in to the database and will ready for the next set of data.
String password=wdContext.currentContextElement().getpwd();
try{
     InitialContext ctx=new InitialContext();
     DataSource ds=(DataSource)ctx.lookup("jdbc/SAPJ2EDB");
     Connection con=ds.getConnection();
     con.setAutoCommit(false);
     Statement stmt=con.createStatement();
     int retIns = stmt.executeUpdate("insert into TMP_NEWUSERDETAIL(PASSWORD) values("password")");
     con.commit();
     con.setAutoCommit(true);
     wdContext.currentContextElement().setpwd(null);
or use a seperate button to clear the field.
wdContext.currentContextElement().set<Attributename>(null);
Regards
Vijayakhanna Raman

How do you change the fields that are displayed on the email preview list after a search?

How do you modify the fields that are displayed in the mail preview list in the center column of Mac mail after you conduct a search of your email? All of a sudden the displayed fields changed on me whenever I do a search in mail. When I have not filtered my email with a search, the default field shown in bold at the top of each message's preview is the "From" field. However, when I do a search this changes to the "To" field. Can anyone help? Thanks, ccarey

ipicus
But why would you want this?
iTunes is responsible for the File Management, let it get on with it, you do your organisation in the iTunes window. And everything you need to do, you can do via the iTunes Window. Want to find the file of a track quickly? Right click on it in the iTunes Window and select Show File: A finder window pops open with the file already selected.
Regards
TD

How to find relationship between database tables

Hi Mate,s.
Iam new to SAPBW , PLZ tell me , How to find releationship between database table(Transperent tables).
Regards.
harry

hi harry,
from your previous postings, i guess you are asking relationship between tables in r/3, following links may help :
http://www.sapgenie.com/abap/tables.htm
http://www.sapgenie.com/abap/tables_sd.htm
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sapgenie.com/abap/tables_fi.htm
http://www.sapgenie.com/abap/tables_ps.htm

How to validate the field when i am populating the data cursor to block

Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.

902434 wrote:
Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.If you want to validate at entry level then use When-Validate-Item trigger and check the input and show message. Like
If :quentity <0 then
message('do not enter negative value');
message('do not enter negative value');
raise form_trigger_failure;
end if;Why u open same thread again ? not closing one.. check this one
</a>
How to validate the field when i am populating the data cursor to block
Hopes this helps
If someone's response is helpful or correct, please mark it accordingly.

How can I link specific cells in two different speadsheets so the data from a specific cell in spreadsheet A automatically updates in a specific cell in spreadsheet B. It works in Xcel- Any ideas?

How can I link specific cells in two different tables so the data from a specific cell in table A automatically updates in a specific cell in table B? It works in Xcel- Any ideas?

(1) your title ask the way to link different spreadsheets.
In Numberland, a spreadsheet is an entire document.
There is no way to link different documents.
(2) in the message, you ask the way to link different tables.
This feature is available and is described in iWork Formulas and Functions User Guide (which is available for free from the Help menu).
Getting the info just requires a simple search in this available resource !
Yvan KOENIG (VALLAURIS, France) 14 mai 2011 10:37:50

How can I link between FORTRAN program and Labview

I try to use lapviwe to link betwwen different codes one of the them is FORTRAN *.for and the other is Neurosolution breadboards *.nsb but I don't know how so if you can help me I'll do appreciate that for you.

ahmedr40,
I would suggest building the FORTRAN code into a DLL as well as the breadboard code. You can then use the Call Library Function node to call the compiled code. This would be the easiest and fastest method. You could also compile these pieces of code and link them to some C/C++ code that you can write and then call this code from LabVIEW.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

How to find in which table field "DDTEXT" with entry "xyz"

How to find in which table field "DDTEXT" with entry "Item number in contract account document" exists.
There are too many tables with field name "DDTEXT"

Refer:
Getting short text of data element

How to put an asterisk in the field label rather than on the field in Infopath

For a mandatory field in Infopath, we know that the red asterisk shows up always on the control. Is there a way we can make it appear on the label instead.
In the figure below, can we have the red asterisk on the label where ? symbol is present ?

Hi Prajk,
From your description, my understanding is that you want to put an asterisk in the field label rather than on the field in Infopath.
By default, the asterisk is on the field, not the field label. If you want to put an asterisk in the field label, per my knowledge, you need to develop the column to do it.
For developing InfoPath controls, I suggest you create a new thread on Visual Studio Tools for Office forum, more experts will assist you with Office development.
VSTO:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vsto
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

To find the field values of Start and End time

Hi
The workcenter idoc LOIWCS02 is not populating the fields
start time BEGZT and endtime ENDZT
Actually these fields are stored in KAPA table.i can see the field entries thru the transaction CR03 but those values are not stored in KAPA tables.
when i click intervals and shifts tab in CR03 I can see the start time BEGZT and endtime ENDZT values but when i go to the database table KAPA these field values are empty.
Does anybody know where to get these values
Is SAP not storing these values
Please let me know

Hi
Thanks for your reply
I already tried that ...no data populated..it seems to be an SAP bug...we are using 4.7
Let me know if you know any futher info on this
Thanks
MM

I am trying to map the fields in R3 system with the infoobjects in BW.

I am mapping the fields with in R3 with the infoobjects in BW.
Can any please let me know the relavent mapping infoobjects and the procedure to find for the following fields.
Description                          Type          Length
Purchase Order     VARCHAR2     10
PO Line Number     NUMBER     10
Line Item Description     VARCHAR2     60
Order Quantity
Unit of Measure     VARCHAR2     3
Performance Start Date     DATE     7
Performance End Date     DATE     7
Order Date                           DATE      7
PO Line Extended Amount     NUMBER     14
PO Line Total Amount     NUMBER     14
Project                         VARCHAR2     30
Account ID                         VARCHAR2     15
Cost Amount                             NUMBER      14
Prime Contract ID     VARCHAR2     20
Requisition ID     VARCHAR2     10
Vendor ID                            VARCHAR2     12
Vendor Name     VARCHAR2     25
Entry Date/Time      DATE     7
Address Descriptive Code     VARCHAR2     10
Address Line 1     VARCHAR2     40
City Name                         VARCHAR2     25
Mail State                          VARCHAR2     15
Postal Code                         VARCHAR2     10
Country Code     VARCHAR2     8
Phone Number     VARCHAR2     25
Fax Number ID     VARCHAR2     25
Other Phone Number ID     VARCHAR2     25

Hi,
You can find the fields and related infoobject for the datasource as follows
Step1
log on to the BW system
Step2
Go to SE11 ---> give the table name as RSOSFIELDMAP and execute
Step3
give the data source name for OLTPSOURCE field and execute
Step4
you will find the mapping between fields and relevent infoobjects
Hope this helps
Santosh

- No link between IOM port 3/2/2 and fabric interconnect B:1/18

Specifically I'm trying to find out what the 3/2/2 means in - No link between IOM port 3/2/2 and fabric interconnect B:1/18

This from the fault reference guide:
"No link between IOM port [chassisId]/[slotId]/[portId] and fabric interconnect [switchId]:[peerSlotId]/[peerPortId]"
http://www.cisco.com/en/US/docs/unified_computing/ucs/ts/faults/reference/UCS_SEMs.html#wp1306388

How to find link between the field (kzbew) mvt.ind. and the (ebeln) ?

Similar Messages

Maybe you are looking for