How to find model no

dear all
i buy hp latop some time ago . now when i change the my laptop hdd , then i never success to install all driver because i cannot understand my laptop model no my method of fined model no
1. i open the directX diagnostic tool
2. Check the model no in BIOS
3. Check sticaker of back side
bios and direct x dispaly (dv 6000) same model no orther place dispaly
(dv 6700)
what'a types a problem
[text removed for privacy]

Hi,
Look at the service tag on the underside of your notebook and post back with the Part Number.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
     O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
    /↑\ Fks
   O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
   ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
               child.constraint_name fk,
               child.table_name child,
               child.r_constraint_name pk,
               father.table_name father
          from all_constraints father, all_constraints child
         where child.r_owner = father.owner
           and child.r_constraint_name = father.constraint_name
           and father.constraint_type in ('P', 'U')
           and child.constraint_type = 'R'
           and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
   and child.table_name = aux.child
   and father.constraint_name = aux.pk
   and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, <font color=red>IN RED</font>):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
    identified by philips';
select granted_role bulk collect
    into cRoles
    from user_role_privs
   where username = user;
for i in cRoles.first .. cRoles.count loop
    execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
                           constraint root1_id_pk primary key(root1_id)
                           enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
   before delete or insert or update on philips.root1
   begin
     null;
   end;
create table philips.root2(root2_id number,
                           constraint root2_id_pk primary key(root2_id)
                           enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
   before delete or insert or update on philips.root2
   begin
     null;
   end;
create table philips.node1(node1_id number,
                           root1_id number,
                           node2_id number,
                           node4_id number,
                           constraint node1_id_pk primary key(node1_id)
                           enable,
                           constraint n1_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n1_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable,
                           constraint n1_n4_id_fk foreign key(node4_id)
                           references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
   before delete or insert or update on philips.node1
   begin
     null;
   end;
create table philips.node2(node2_id number,
                           root1_id number,
                           node3_id number,
                           constraint node2_id_pk primary key(node2_id)
                           enable,
                           constraint n2_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n2_n3_id_fk foreign key(node3_id)
                           references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
   before delete or insert or update on philips.node2
   begin
     null;
   end;
create table philips.node3(node3_id number,
                           root2_id number,
                           constraint node3_id_pk primary key(node3_id)
                           enable,
                           constraint n3_r2_id_fk foreign key(root2_id)
                           references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
   before delete or insert or update on philips.node3
   begin
     null;
   end;
create table philips.node4(node4_id number,
                           node2_id number,
                           constraint node4_id_pk primary key(node4_id)
                           enable,
                           constraint n4_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
   before delete or insert or update on philips.node4
   begin
     null;
   end;
-- out of the relational model
create table philips.node5(node5_id number,
                           constraint node5_id_pk primary key(node5_id)
                           enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
   before delete or insert or update on philips.node5
   begin
     null;
   end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
    aExportTablesPhilips     utl_file.file_type := null; -- file to write DDL of tables
    aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
    aExportIndexesPhilips    utl_file.file_type := null; -- file to write DDL of indexes
    aExportGrantsPhilips     utl_file.file_type := null; -- file to write DDL of grants
    aExportTriggersPhilips   utl_file.file_type := null; -- file to write DDL of triggers
    sDirectory               varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
    cTables                  udt_tables; -- collection to store table names for the relational depth
begin
    -- omits all referential constraints:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
    -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
    -- append a SQL terminator (; or /) to each DDL statement:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
    -- create/open files for export DDL:
    aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
    aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
    aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
    aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
    aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
    select d.table_name bulk collect
      into cTables -- collection with the names of tables in the schema philips
      from all_tables t, philips.dictionary d
     where owner = 'PHILIPS'
       and t.table_name = d.table_name;
    -- execution
    sp_seeks_ddl(aExportTablesPhilips,
                 aExportReferencesPhilips,
                 aExportIndexesPhilips,
                 aExportGrantsPhilips,
                 aExportTriggersPhilips,
                 cTables);
    -- closes all files
    utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips     in utl_file.file_type,
                         aExportReferencesPhilips in utl_file.file_type,
                         aExportIndexesPhilips    in utl_file.file_type,
                         aExportGrantsPhilips     in utl_file.file_type,
                         aExportTriggersPhilips   in utl_file.file_type,
                         cTables                  in out nocopy udt_tables) is
    cDDL       clob := null; -- colletion to save DDL
    plIndex    pls_integer := null;
    sTableName varchar(30) := null;
begin
    for i in cTables.first .. cTables.count loop
      plIndex    := i;
      sTableName := cTables(plIndex);
       * Retrieves the DDL and the dependent DDL into cDDL clob       *
      * for the selected table in the collection, and writes to file.*
      begin
        cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTablesPHILIPS, cDDL);
      exception
        when dbms_metadata.object_not_found then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportReferencesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportIndexesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportGrantsPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTriggersPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
    end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
                          cDDL    in out nocopy clob) is
    pLengthDDL pls_integer := length(cDDL);
    plQuotient pls_integer := null;
    plRemainder pls_integer := null;
begin
      * Register variables to control the amount of lines needed   *
     * for each DDL and the remaining characters to the last row. *
    select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
      into plQuotient, plRemainder
      from dual;
      * Join DDL in the export file.                            *
     * ps. 32766 characters + 1 character for each line break. *
    -- if the size of the DDL is greater than or equal to limit the line ...
    if plQuotient >= 1 then
      -- loops for substring (lines of 32766 characters + 1 break character):
      for i in 1 .. plQuotient loop
        utl_file.put_line(aExport, substr(cDDL, 1, 32766));
        -- removes the last line, of clob, recorded in the buffer:
        cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
      end loop;
    end if;
      * If any remains or the number of characters is less than the threshold (quotient = 0), *
     * no need to substring.                                                                 *
    if plRemainder > 0 then
      utl_file.put_line(aExport, cDDL);
    end if;
    -- record DDL buffered in the export file:
    utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;<font color="red">The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?</font>

"Web'n'Walk III" Huawei dongle, how to find out what Huawei model it is?

I just bought this "web 'n' walk III" UMTS Modem (USB) made by Huawei. I want to instal it but do not know if the enclosed software is out of date (MobileConnectDriver(2.9.2)) and works under SL. Does anybody know how I find out what type of Huawei dangle it is so I can find the correct software?
any tips as to how to use this smoothly as the stick is to SIM locked and I will use it with a SIM from an other provider (Stick is branded by T-Mobile).

I worked out the model number, it is 'hidden' in small print on the back, in a larger number.

How to find out the destination of an "Adaptive RFC Model - DEPRECATED"

Hi All,
How to find out the destination of an "Adaptive RFC Model - DEPRECATED" of an running application
and Where is the destination created in the server .
I have got the code of the running project from NWDI .
Thanks in Advance
Regards
Piyas Kumar

Hi,
I am not sure I fully understand the question, but as per the guide
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50f7192d-2808-2d10-189b-df3fa5f71abf
Excerpt from Page 7
Caveat Confector!1
ARFC1 destinations were created using the Web Dynpro Content Administrator tool. This tool is
still available for compatibility reasons, but the destinations it creates are not used by ARFC2
models!
Instead, you should use the u201CDestinationsu201D tool found on the Configuration Management screen of
the NetWeaver Administrator.
Therefore I think if you look up the application in the WD content Admin, there you can find out what kind of JCO/RFC connections are belonging to it. You can find it on http://<host>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
Browse your application here, and then select the JCO Connections tab on the right hand side.
I hope this helps.
Best Regards,
Ervin

How to find the Model size in Semantics

Hi All,
Please can you tell me how to find the model size in Semantics.
Thanks,
Indu

Hi,
Instead of looking up the ID for the Entailment in DB_VIEWS you can better use MDSYS.SEM_NETWORK_INDEX_INFO
For example:
select name, type, id from MDSYS.SEM_NETWORK_INDEX_INFO;
NAME TYPE ID
MYMODEL MODEL 60
MYMODEL_INF ENTAILMENT 69
*** Space about the B-tree indexes on models and entailments ***
Indexes created in RDF_LINK$ for a specific model:
SQL> select name, type, id, index_name from MDSYS.SEM_NETWORK_INDEX_INFO;
NAME TYPE ID INDEX_NAME
MYMODEL MODEL 60 RDF_LNK_PCSGM_IDX
FAMILY100 MODEL 59 RDF_LNK_PSCGM_IDX
FAMILY100 MODEL 59 RDF_LNK_PCSGM_IDX
FAMILY2 MODEL 56 RDF_LNK_PCSGM_IDX
FAMILY2 MODEL 56 RDF_LNK_PSCGM_IDX
FAMILY MODEL 57 RDF_LNK_PCSGM_IDX
FAMILY MODEL 57 RDF_LNK_PSCGM_IDX
OTHERMODEL MODEL 58 RDF_LNK_PSCGM_IDX
OTHERMODEL MODEL 58 RDF_LNK_PCSGM_IDX
0 NETWORK 0 RDF_LNK_PCSGM_IDX
0 NETWORK 0 RDF_LNK_PSCGM_IDX
MYMODEL_INF ENTAILMENT 69 RDF_LNK_PCSGM_IDX
MYMODEL_INF ENTAILMENT 69 RDF_LNK_PSCGM_IDX
Then get the size from DBA_SEGMENTS
select bytes/1024/1024 MB, partition_name from dba_segments where segment_name in ('RDF_LNK_PSCGM_IDX','RDF_LNK_PCSGM_IDX');
Specifically for our model 60 and Entailment 69:
select bytes/1024/1024 MB, partition_name from dba_segments where segment_name in ('RDF_LNK_PSCGM_IDX','RDF_LNK_PCSGM_IDX') and partition_name in ('MODEL_60','MODEL_69');
MB PARTITION_NAME
192 MODEL_60
192 MODEL_60
60.0625 MODEL_69
62.375 MODEL_69
You would add them all for the size of the indexes

How to find server model from 11g OEM mgmt$ views

How to find server model from 11g OEM mgmt$ views
server model like Dell 710, DL380 G7 etc..,

It is included in this query (run as user SYSMAN):
SELECT t.target_name AS host_name,
ecm_util.HOST_HOME_LIST (t.target_name, t.target_type) AS home_info,
hw.vendor_name AS Vendor,
hw.system_config AS System_Config,
hw.machine_architecture Architecture,
os.name AS os_name,
os.base_version os_base_version,
os.update_level os_update_level,
os.address_length_in_bits os_address_length_in_bits
FROM mgmt_targets t, mgmt_ecm_snapshot s, mgmt_hc_os_summary os, MGMT_HC_HARDWARE_MASTER hw
WHERE t.target_type = 'host'
AND t.target_name = s.target_name
AND s.snapshot_type = 'host_configuration'
AND s.target_type = 'host'
AND s.is_current = 'Y'
AND s.snapshot_guid = os.snapshot_guid
AND hw.snapshot_guid = s.snapshot_guid
ORDER by t.target_type
The asked info is available in the view MGMT_HC_HARDWARE_MASTER, column: SYSTEM_CONFIG
Eric

How to find which model of iPhone 5 I am using? and is that GSM or CDMA?

How to find which model of iPhone 5 I am using? A1428 or A1429 ? Is there any short code you can dial in and check the model number ?
And which is GSM or CDMA out of this model.

If you purchased the phone in the US with an AT&T contract then you have the locked CDMA A1428 version of the iPhone 5.
At the moment and if the contract is a new contact, then you won't be able to get the phone unlocked at the moment and no, you won't be able to use it in your home country. You will also have LTE 4G compatibility issues too and your phone will only work on 3G and also you need to remember that iPhones are only covered by country specific warranty, so it is only covered in the US, so if you go home and then have a problem with your phone, you will have to come back to the US to get it repaired.
You need to approach AT&T about whether they will unlock your phone for you as they are the ONLY ones that can do it, but the answer to your question is no and if you had wanted to use your phone at home, then you should not have purchased it in the US. The best that you can hope for at the moment is to use it on international/roaming.
If you purchased your phone in the US, then it will be a CDMA phone. You don't have a GSM phone, but GSM phones are unlocked anyway and these are the ones that are selling in Canada and the UK.
If you have your phone on an AT&T contract then ultimately, AT&T are the only ones who can help you with any questions regarding unlocking and they are the only ones who can unlock it for you, noone else.

How to find out IODs number for Cisco AP model 1602

Hi All
i have 5 cisco AP with model 1602, i need some help on how to find out the IODs from the device, the reason to do this is to add all the AP to our solarwinds server, hope you can help, Thanks !
Keith

we are using Stand Alone, as how to find out the IODs from the device, as i have already enable snmp on the AP, and has been added to the solarwinds server, and below is what solarwinds replied, how to obtain OID ?
Yes, your AP device can now be monitored even the interfaces, availability, CPU, memory, etc., however you mentioned that you also want to monitor the clients of your AP, the client's ip address, the name of the clients and other resources.
In order to do this, we need to use the Universal Device Poller, we will manually configure NPM to poll the other resources of your AP, that's why we need the OID.

How to find part number on Motherboard?

Hi all - I've got a G4 MDD dual 1g mac that I fear has a bad motherboard. I have done some preliminary research into buying a replacement board, which leads me to my question (2-parter):
1. Can anyone tell me how to find the part number or identify the motherboard in this computer? (so I don't buy the wrong thing)
2. Other than eBay, can someone recommend a good source for finding a replacement board?
Any info would be MUCH appreciated. Thanks in advance!

G4ce,
The part number is at the end of PCI card slot 5. It will say "APPLE COMPUTER 820-nnnn 2002" (or 2003).
820-nnnn is the part number, it'll always be 820 in the first part, but the last 4 digits can be different depending on model and manufacture date. Typical values are 1308, 1440, 1445.
If you're planning to re-use your existing processors, the new board number should match exactly.
I say"If" because you may find a complete MDD or one sold without certain parts a lot easier than the exact model number board.

How can find database field and table name

how can find the underline database field name,table name from java page. Example. in oracle apps when we go purchaseing super user then supplier base then supplier and find supplier detail .

Hi,
depends on your model. If you work with ADF BC then you can use ViewLinks to access parent or detail infromation programmatically. See the developer guides for more information. Note that you wont access the tables directly but the collections that represent the records
Frank

How to find colums in CLOB variable and get this colums value to update col

Question
How to find colums in CLOB variable and get this colums value to update colum of oracle database table
How my work will go
Step-1 - I am creating XML FIle which is based on code that we discused before-
Its developing xml file with data in <...inputelement> as u can see in my xml but in <..output> Element of xml its just have all column for exampe <itemoutput>
<FLD NM = "ABC"> 0 </FLD>
<FLD NM = "XYZ:> </FLD> --- for varchar2
</itemoutput>
In 1st stage i am just generating <..INPUT> with its colums and real value from database and <..output> elements will go zero value but with colums name.
Note. I create temp table will all COLUMN which u can see in both in <..ITEMINPUT> and <..ITEMOUTPUT>
Step2.. After Generaing my xml i want to convert my xml data into CLOB not in a file. so clob will go to the VENDOR
STEP3.
I will Recieved again xml data in CLOB from the vendo in <.OUTPUT> ELEMents
for example
I send this format
<itemoutput>
<FLD NM = "ABC"> 0 </FLD>
<FLD NM = "XYZ:> </FLD> --- for varchar2
</itemoutput>
And i will receive it
<itemoutput>
<FLD NM = "ABC VALUE"> 2 </FLD>
<FLD NM = "XYZ TYPE:> SUV</FLD> --- for varchar2
</itemoutput>
So will take this output valu from xml clob and will update my staging table .
Which have the same colum name as its look in xml clob.
Step- 4. I will take this value from staging table and update my original oracle database table. which i send you before.
But u leave this step becaue you dont know the staging table colum maping with original table.
I think now you understand
Please feed back
monriz

here is my xml..
I want to extract <..output> elements which enclosed with " " and its values from this xml file. please any body have any idea. please tell me
Thanks
<?xml version="1.0" ?>
- <RATABASECALC COPYRIGHT="COPYRIGHT 2001>
- <RATEREQUEST USEREFID="YES">
- <ANCHOR>
<DATABASENAME />
<DATABASEPW />
<DATABASESOURCE />
<DATABASEPRVDR />
<USERNAME />
<SEVERITYDES />
<CALLDES />
<INITACCDES />
<INITACCV />
<ITEMSEQDES />
<ITEMMATCHDES />
<CENTURYDES />
<DATEDES />
<FORMULADES />
<STRINGDES />
<VALIDATIONDES />
<STEPSDES />
<RETINFONUM />
<ADDLRETINFONUM />
<ANCHORNOMATCH />
<NOMATCHMSG />
<TRANUUID />
<LOGOPTION />
<MSGOPTION />
<USERLOGFN />
<NOITEMERROR />
<LOGFORMAT />
<LOGFN />
<STEPSFN />
<NUMNOMATCH>0</NUMNOMATCH>
<NUMERRORS>0</NUMERRORS>
</ANCHOR>
- <POLICIES>
- <POLICY>
<BUSINESSDES>N</BUSINESSDES>
<LEGALENTITYOWNER>CGI TRAINING AND DEMONSTRATION</LEGALENTITYOWNER>
<LEGALENTITYNAME>CGI TRAINING AND DEMONSTRATION</LEGALENTITYNAME>
<COMPEFFDATE>02/01/2000</COMPEFFDATE>
<RETRIEVALDATE>02/01/2000</RETRIEVALDATE>
<POLINPUTS />
- <POLOUTPUTS>
<FLD NM="POLICY CALCS DONE IND">Y</FLD>
<FLD NM="TOTAL DISCOUNTED POLICY PREM">2167.52</FLD>
<FLD NM="TOTAL POLICY PREMIUM">3180.0</FLD>
</POLOUTPUTS>
- <LOBS>
- <LOB>
<LEGALENTITYPRODGROUP>PERSONAL AUTOMOBILE</LEGALENTITYPRODGROUP>
- <LOBINPUTS>
<FLD NM="MULTI-CAR FACTOR">0</FLD>
<FLD NM="MULTI-CAR IND">Y</FLD>
</LOBINPUTS>
<LOBOUTPUTS />
- <REGIONS>
- <REGION>
<LEGALENTITYREGION>MAINE</LEGALENTITYREGION>
- <REGIONINPUTS>
<FLD NM="STATE PREMIUM AMOUNT">0</FLD>
</REGIONINPUTS>
- <REGIONOUTPUTS>
<FLD NM="TOTAL STATE PREMIUM">2356.0</FLD>
<FLD NM="TOTAL DISCOUNTED STATE PREM">2167.52</FLD>
<FLD NM="TOTAL STATE DISCOUNT AMOUNT">188.48</FLD>
</REGIONOUTPUTS>
- <REGIONERRORS>
<NUMLOGENTRIES>3</NUMLOGENTRIES>
<NUMRETURNLOGENTRIES>0</NUMRETURNLOGENTRIES>
</REGIONERRORS>
- <COVERAGES>
- <COVERAGE RBID="COVP1L1R1C1">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F1" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">145.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
- <COVERAGE RBID="COVP1L1R1C2">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F2" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">209.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
- <COVERAGE RBID="COVP1L1R1C3">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F3" />
<COVINPUTS />
<COVOUTPUTS />
<COVCONTROL />
</COVERAGE>
</COVERAGES>
- <ITEMS>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">100</FLD>
<FLD NM="COMP DEDUCTIBLE">FULL</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">N</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">15</FLD>
<FLD NM="TOWING INDICATOR">Y</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1997</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">N</FLD>
<FLD NM="GOOD STUDENT IND">N</FLD>
<FLD NM="CLASS CODE">11</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">B</FLD>
<FLD NM="ANTI LOCK BRAKE IND">Y</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">A</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">0.84</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">1166.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">438</FLD>
<FLD NM="TOTAL COMP PREMIUM">218</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">475</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">4</FLD>
<FLD NM="TOTAL TOWING PREMIUM">4</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C1" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">50</FLD>
<FLD NM="COMP DEDUCTIBLE">FULL</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">N</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">12</FLD>
<FLD NM="TOWING INDICATOR">N</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1997</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">N</FLD>
<FLD NM="GOOD STUDENT IND">N</FLD>
<FLD NM="CLASS CODE">12</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">0</FLD>
<FLD NM="ANTI LOCK BRAKE IND">Y</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">0</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">0.88</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">1190.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">468</FLD>
<FLD NM="TOTAL COMP PREMIUM">194</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">497</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">4</FLD>
<FLD NM="TOTAL TOWING PREMIUM">0</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C2" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
- <ITEM>
<ITEMINPUTS />
<ITEMOUTPUTS />
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C3" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
</ITEMS>
- <FORMULAS>
- <FORMULA RBID="FMLAP1L1R1F1">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
- <FORMULA RBID="FMLAP1L1R1F2">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
- <FORMULA RBID="FMLAP1L1R1F3">
<FORMULANAME>PREMIUM DISCOUNT</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
</FORMULAS>
<REGIONCONTROL />
</REGION>
- <REGION>
<LEGALENTITYREGION>NEW HAMPSHIRE</LEGALENTITYREGION>
- <REGIONINPUTS>
<FLD NM="STATE PREMIUM AMOUNT">0</FLD>
</REGIONINPUTS>
- <REGIONOUTPUTS>
<FLD NM="TOTAL STATE PREMIUM">824.0</FLD>
<FLD NM="TOTAL DISCOUNTED STATE PREM">0</FLD>
<FLD NM="TOTAL STATE DISCOUNT AMOUNT">0</FLD>
</REGIONOUTPUTS>
- <REGIONERRORS>
<NUMLOGENTRIES>2</NUMLOGENTRIES>
<NUMRETURNLOGENTRIES>0</NUMRETURNLOGENTRIES>
</REGIONERRORS>
- <COVERAGES>
- <COVERAGE RBID="COVP1L1R2C1">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F4" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">0.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
</COVERAGES>
- <ITEMS>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">500</FLD>
<FLD NM="COMP DEDUCTIBLE">250</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">Y</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">11</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1996</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">Y</FLD>
<FLD NM="GOOD STUDENT IND">Y</FLD>
<FLD NM="CLASS CODE">36</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">0</FLD>
<FLD NM="ANTI LOCK BRAKE IND">0</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">0</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">1.11</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">824.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">332</FLD>
<FLD NM="TOTAL COMP PREMIUM">123</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">334</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">8</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R2C1" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
</ITEMS>
- <FORMULAS>
- <FORMULA RBID="FMLAP1L1R1F4">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
</FORMULAS>
<REGIONCONTROL />
</REGION>
</REGIONS>
</LOB>
</LOBS>
- <RETINFOS>
<TOTALRI>0</TOTALRI>
</RETINFOS>
</POLICY>
</POLICIES>
</RATEREQUEST>
</RATABASECALC>
Above xml data - some <...OUTPUT> elements has some FLD elements. and i want to take those outputelemt's FLD Elements data and update my oracle tables.
Note: FLD = "Attribie" are the colums name of the tables
back to top

Command for "How to find Cursor Size" in Oracle Stored Procedure"

Hi
Can u tell me....
How to find Cursor Size" in Oracle Stored Procedure........
I want command for that........

why don't you try select count(*) from your_table;That requires running the same query twice - or rather running two different queries twice. Besides it still doesn't guarantee anything, because Oracle's read consistency model only applies at the statement level (unless you're running in a serialized transaction).
This is such a common requirement - users are wont to say "well Google does it" - it seems bizarre that Oracle cannot do it. The truth is that that Google cheats. Firstly it guesses the number on the basis of information in its indexes and refines the estimate as pages are returned. Secondly, Google is under no onus to kepp all its data and indexes synchronized - two simultaneous and identical queries which touch different Google servers can return different results. Oracle Text works the same way, which is why we can get a count with CTX_QUERY.COUNT_HITS in estimate mode.
Cheers, APC
blog: http://radiofreetooting.blogspot.com
.

How to find out the amount of ram a computer can hold

I want to know how to find out what is the max amount of ram my computer can actually take advantage of, rather than tell you my model and you tell me what is the max because I know it varies according to the model of the Computer
But if you'd like to help the other way, here is my model: Macbook(13-inch, Mid 2010 [unibody]) basically the latest version of the white macbook.

Pointdexter11 wrote:
simple version: what algorithms do they use to figure out the max is 8GB
That is not a simple question. I don't think anyone here knows the exact testing process that Apple uses to determine what the max ram will be at the time of release. This is done during the development process.

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

How to find information from a field in R3 to get it in Business Content

Hi all, my case is this:
i want to learn how to get or struct a model in BW, for example, my task is make a query where the client wanna get information , and he told me the fields, ok, in R3 i got the name of the field (NODISCONCT), the struct (EANLD), and others fields more, ok, now i have to activate the data model to load this fields in InfoObjects, thats the problem, i dont know how make my model and find it in Business content, i was looking for in http://help.sap.com but i couldnt find it, but i want to learn more how to do it, and the best way to do this task, help me guys, i know this is a very important step that i must learn very well to make my carrer in BW, i ll really apreciate it !
Thanks !

Hi,
see suppose i can give you one example.
http://help.sap.com/saphelp_nw70/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
from this link you get idea about fi-ar and fi-ap
client will give you that these are the field i want . for this report. From report you can get idea
What is on it . Here you need to think you want to go top down or bottom up.
bottom up - you need to check with data source. then this datasource is related cube or dso and then report
just play with help.sap.com in bi content you will get idea

How to find model no

Similar Messages

Maybe you are looking for