How to find out default screen variant name

Hi All,
For particular sales order creation I want to find out which screen variant has been used.
I have tried using SHD0, with entering Transaction code as VA01 but in that for Transaction variant field there are 5 different transaction variant names are mentioned.
Please guide me how to find out the transaction variant name used in va01 for particular sales order.
Thanks and regards,

Hi,
Goto VOV8 T.Code.
Select your order type.Details.
Check what is the transaction variant assigned to your order type.
It is used while creating the order.
This field is present in transaction flow tab.
Regards,
Krishna.

Similar Messages

  • How to find out list of variants in TVARV table

    hi!
    can anybody can guide me on the following issues? plz
    How to list all variants in TVARV table?
    How to find out any Z* programs that writes to TVARV table, using the variant name?
    How to find out the programs which are  reads the TVARV data into a program variant?
    Thanks & Regards,
    vijay

    Or some help might be useful:
    http://help.sap.com/saphelp_47x200/helpdata/en/c0/98037ae58611d194cc00a0c94260a5/frameset.htm
    Regards,
    Subramanian V.

  • How to find out the Target Component name and Target view name

    Hi All Expert,
                      I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
    Thanks in Advance....
    Vishwas Sahu

    Hi Vishwa,
                 The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
    CASE iv_property.
        WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
          rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
        WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
          rv_value = 'EXAMPLE'.
    Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
    This is a huge topic and  i have just mentioned you basic things.
    Regards,
    Bharathy.

  • How to find out what is the name of table/view is being maintained in  IMG?

    Gurus,
    Any general trick to find out what is the name of table/view is being maintained
    by a given IMG item while configuring?
    Thanks,

    Hi,
    Click F1  on the table/ view you will get the table name and then go to transaction give this table name and click on Find Maintainance Dialog their you will get the views related to that table.
    Regards,
    IFF

  • How to find out a screen exit

    hi seniors
    can any one tell me abt screen exit n thier search.
    pls hurry
    points will be rewarded
    offer valid for today only.
    Sameer

    hi,
    How to Find a Screen Exit in a Given SAP Standard T-code
    Program
    REPORT YSMOD2 .
    TABLES: MODSAP, MODACT, TSTC.
    PARAMETERS: INPUT1 LIKE TSTC-TCODE DEFAULT ' ',
                INPUT2 LIKE MODSAP-TYP DEFAULT ' '.
    DATA: SEARCH1(6),
          SEARCH2(3),
          SEARCH3 LIKE MODSAP-MEMBER.
    DATA : FIRST_ROW VALUE 'Y'.
    CONCATENATE: '%' INPUT1 '%' INTO SEARCH1,
    '%' INPUT2 INTO SEARCH2.
    SELECT * FROM TSTC WHERE TCODE LIKE SEARCH1.
    FIRST_ROW = 'Y'.
    CHECK TSTC-PGMNA NE SPACE.
    CONCATENATE '%' TSTC-PGMNA '%' INTO SEARCH3.
    SELECT * FROM MODSAP WHERE TYP LIKE SEARCH2
    AND MEMBER LIKE SEARCH3.
    SELECT SINGLE * FROM MODACT WHERE MEMBER = MODSAP-NAME.
    IF FIRST_ROW EQ 'Y'.
       WRITE: /0 TSTC-TCODE, 6 TSTC-PGMNA, 16 MODSAP-NAME, 32 MODSAP-TYP,
              45 MODSAP-MEMBER, 70 MODACT-NAME.
       FIRST_ROW = 'N'.
    ELSE.
       WRITE: /16 MODSAP-NAME, 32 MODSAP-TYP, 45 MODSAP-MEMBER, 70 MODACT-NAME. 
    ENDIF.
    CLEAR : MODSAP, MODACT.
    ENDSELECT.
    IF SY-SUBRC NE 0.
       WRITE : /0 TSTC-TCODE, 6 TSTC-PGMNA, 30 'No exits found'.
    ENDIF.
    CLEAR TSTC.
    ENDSELECT.
    END-OF-SELECTION.
    CLEAR: SEARCH1, SEARCH2, SEARCH3.
    Regards
    Sudheer

  • How to find out where a variant is being used?

    Hi,
    I have a variant name and would like to know in which program it is being used. How do I find that out?
    Thanks in advance.
    Mick

    Hi,
    checkout these tables:
    VARIT Variant texts
    VARID Variant directory
    I think u can enter the variant name and go on for the <b>where-used list</b> for same and can get program name for that variant.
    Hope it works out.
    Pls reward points iof useful.
    Regards,
    Ameet

  • How to find out the current form name

    Hi all,
    I have to pass the current sapcript form name in the sauroutine pool for some further processing.
    I just wanted to is there any variable, method, or way to find out the current/running Sapscript form name generically so that we can pass it on to subpool.
    Looking forward for your reply.
    Regards,
    Anuja.

    Hi All,
    Many thnaks for your replies.
    Actually in my case the situation is, i have to change in multiple forms.
    I mean the same perform needs to be used in all the forms almost around 20 using the current form name.
    So that perform should be generic. I mean is there any variable/ method or way to get the current form name so that we can pass that to the subroutine pool through form.
    Looking forward for yoour reply.
    Regards,
    Anuja.

  • How to find out SSRS report server name

    I'm trying to follow the steps for using SSRS web services (http://ssrstutorials.blogspot.com/2012/10/lesson-12-using-ssrs-web-services.html).
    In Step 3:
    Click advanced--> add web reference -- url - http://localhost/reportserver/reportservice2005.asmx
    (replace localhost with your report server name).
    How do I know what's my report server name?
    Thanks, 

    Hi sherri71,
    Sorry for that mark an incorrect reply as an answer.
    The reply suggested by Akbar is about Instance Name, not report server name. Based on my further research, I find that the Reporting Services server name is the computer name which install
    the report server. So we can try to click Start button, right-clicking Computer, and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine xiong
    Katherine Xiong
    TechNet Community Support

  • How to find out the customer exit name

    Hi Friends:
    I've an include ZCAXXI_USEREXIT_F05. How can I find that in which exit this include is present. Is there any table? Also where from I can find the name of the project once I find the exit name.
    Suitable points will be rewarded.
    Regards:
    Gaurav

    Hi,
    Go to se38 and give your include name. Click on where used list (CTrlshiftf3). Then you will get the main program. From the main program you will get the function module exit.
    If you know the exit name then follow the below steps to get the project:
    Go to se11>enetr 'Modsap' table name>give your function module eg EXIT_SAPLCOZF_001 in the member field then you will get the Enhancement i.e COZF0001 For that.
    Then Go to se11-->modact -->here in memeber field enter COZF0001 then you will get the project name(if a project is there for that enhancement)
    Reward points if useful.
    Regards,
    Soumya.
    Edited by: Soumya Jose on May 26, 2008 1:36 PM

  • Given a business object type, how to find out the underlying table name ?

    Hi,
    Given a business object type (e.g. BUSxxx), is there any Function Module that can be used to get the table name for that object ?
    Have been through the SWO* FM's but did not get anything yet.
    Pls let me know how this can be done.
    Regards,
    -Kev.

    >
    Kelevenwise wrote:
    > Thanks Christine for the response..
    > Let me add a few more details to clarify my requirement
    >
    > I need to read the data of business objects (not a specific one, but the application should be able to read data of any business object). Given a table name, I am able to figure out the column information and read that data. But all I have is the business object type, so would need to figure out all the tables (as you helpfully pointed out, there could be more than 1 for a business object) and then read from those tables.
    >
    > The reason I feel I cannot use the business objects methods directly is because I would not know which method to call to get me the relevant data - this is an external application, not called from within the system.
    >
    > Is there another way to achieve this requirement ?
    >
    > Regards,
    > - Kev.
    So, assuming for the moment we are just dealing with the PO BUS2012 business object, your external application will be passing you a BO type and also (presumably- otherwise you could be sending back an awful lot of data) a BO key,  and you then want to send back all the detail for PO - exactly what the GetDetail method that is present on most objects does - is that right?
    Since most BOs have a GetDetail method, can't you just use that? 
    Though I really can't see why your external application would be interested in all SAP BOs - most applications are a bit more specific than that.

  • How to find out default value of parameter in stored function???

    Hi,
    is there any kind (metadat) how to get default value of parameter of stored function???
    thx

    that's where it's supposed to be, but it doesn't seem to work correctly. I checked on 9 & 10, and the DEFAULT_VALUE column is always null on both. in fact, the underlying column (sys.argument$.default$) is also always null.

  • How to find out the infospoke name for an existing infoobject?

    Hi,
    Could any one pls tell me how to find out the existing infospoke name for an infoobject?
    i've tried with where used list but its not coming....can any one pls suggest
    Thanks,
    Suri

    Hi,
        Check in metadata repository for that infoObject.
    If you are still not able to identify, goto RSBO tx and press F4.
    You will get the list of Infospokes available.
    Go in each and chk from the General Tab, if the infoObject is available in the source system.
    Regards,
    Balaji V

  • How to find out server name in reports9i

    hi all
    how to find out server name in reports9i
    i need the report server name to call a report
    thanks
    Edited by: vikas singhal on Nov 5, 2008 1:02 AM

    You do not need to do anything, if your Report server is on the same machine as the Forms server (which is usually the case) you simply use the url as
    /reports/rwservlet?report=myreport' and the server will automatically use the default report server.
    then you simply use
    web.show_document('/reports/rwservlet?userid=scott/tiger@orcl&report=myreport&desformat=htmlcss&desname=test.html'Tony
    Try it now
    Edited by: Tony Garabedian on Nov 5, 2008 2:00 PM

  • How can I find out the screen size of the users moniter using the Acrobat SDK?

    How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
    Thanks,
    Gregory

    Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
    Gregory

  • How to find out the table name

    hi,
    how to find out the table name in which the data from a particular structure in a particular screen is saved,
    please tell me the procedure to find out the table name for saving the structure data that is inputted at runtime.
    Thanks,
    chinnu

    Hi Chinnu,
    Below are the tables that are referred to find out the table names
    DD02L Table contains the SAP Tables.
    DD02T Table contains the SAP Table Texts.
    DD01L Table contains the Domains
    DD01T Table contains the Domain Texts.
    DD03L Table contains the Table Fields.
    DD03T Table contains the Table Field Texts. (Language Dependent)
    DD04L Table contains the Data Elements.
    DD04T Table contains the Data Element Texts.
    DD05s Table contains the Foreign Key Fields
    last words with L and T only. L->Database Fetch T-> Text
    And the procedure to retrive the table name is as follows
    1. Go to se11
    2. Enter table name DD03T and execute
    3. In the next screen you can find Tables, fields, test etc. there you can enter the field name in the fields 
      and execute.
    4. you can get all tables which contains the field.
    I hope this will solve your problem
    Regards,
    Chandru

Maybe you are looking for

  • Script to open all PST files in a directory and open with Outlook.

    Hi!  I am looking for a script that opens all PST files in a directory, opens it in outlook, and writes to a log to see if it completed correctly.  I'm new to VBscript and just want to see how the script would be written. Thank you!!

  • How do I configure airport to keep IP addresses from changing?

    This is my configuration:      I have an Airport Extreme and 2 Airport Express. The Airport Extreme is connected to a hub, and the hub to the cable modem. One item connected to the hub is a weather station which continually pushes localized weather i

  • Errors- Runtime() in Swing Help

    Hi, Iam trying to use Runtime() in Swing..iam getting nonsense errors what have i missed? import java.io.*; import java.util.*; import javax.swing.*; import java.awt.event.*; import java.awt.*; public class appSrunCommand extends JApplet implements R

  • How to control no of lines in report through variable

    Hi, I have a requirement where the number of lines in the report needs to controled with respect to the printer and the number lines will be accepted through parameter. Can anyone help me on this issue ? Regards Satya null

  • Iphone 5 Can I save my contacts in a readable form or print them out from my phone

    My iphone 5 is working great but I have been inconvenienced in the past because I couuld not access my contacts. I dropped my phone in a glass of koolade 45 days before the new iphone was released. I had to wait 2 months to actually reveive my new ip