How to find out the customer exit name

Hi Friends:
I've an include ZCAXXI_USEREXIT_F05. How can I find that in which exit this include is present. Is there any table? Also where from I can find the name of the project once I find the exit name.
Suitable points will be rewarded.
Regards:
Gaurav

Hi,
Go to se38 and give your include name. Click on where used list (CTrlshiftf3). Then you will get the main program. From the main program you will get the function module exit.
If you know the exit name then follow the below steps to get the project:
Go to se11>enetr 'Modsap' table name>give your function module eg EXIT_SAPLCOZF_001 in the member field then you will get the Enhancement i.e COZF0001 For that.
Then Go to se11-->modact -->here in memeber field enter COZF0001 then you will get the project name(if a project is there for that enhancement)
Reward points if useful.
Regards,
Soumya.
Edited by: Soumya Jose on May 26, 2008 1:36 PM

Similar Messages

How to find out the customer exit and sap exit variables created provider?

Hi all,
How to identify what are all the customer exit and sap exit variables are been created for an info provider. is there any tables which allow us to find out.
thanxs
haritha

Hello haritha,
SAP Exit and Customer Exit variables are created for Characteristics and not for individual InfoProviders.
So whenever the characteristic is used in the InfoProvider, by selection the appropriate variable the exit can be called.
So the same Exit can be in one or more InfoProviders.
Hope it helps.
Thanks,
Chandran

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out the Target Component name and Target view name

Hi All Expert,
                  I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
Thanks in Advance....
Vishwas Sahu

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

How to find out the user exit is implemented

Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,

Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance.

How to find out the current form name

Hi all,
I have to pass the current sapcript form name in the sauroutine pool for some further processing.
I just wanted to is there any variable, method, or way to find out the current/running Sapscript form name generically so that we can pass it on to subpool.
Looking forward for your reply.
Regards,
Anuja.

Hi All,
Many thnaks for your replies.
Actually in my case the situation is, i have to change in multiple forms.
I mean the same perform needs to be used in all the forms almost around 20 using the current form name.
So that perform should be generic. I mean is there any variable/ method or way to get the current form name so that we can pass that to the subroutine pool through form.
Looking forward for yoour reply.
Regards,
Anuja.

How to find out the customer name

I m making a report for qm I need the customer name against the KUNNR field I have tried to find the customer name but i didnt plz anyone can tell me where can i find the customer name and address.
thanks

Hi,
Try like this.
Select single * from kna1 into wa_kna1 where kunnr = '0001012'
if not wa_kna1-adrnumber is initial.
CALL FUNCTION 'ADDR_SELECT_ADRC_SINGLE'
    EXPORTING
      addrnumber              = wa_kna1-adrnumber
   TABLES
      et_adrc                 = it_adrc
EXCEPTIONS
ADDRESS_NOT_EXIST       = 1
PARAMETER_ERROR         = 2
INTERNAL_ERROR          = 3
OTHERS                  = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.

Given a business object type, how to find out the underlying table name ?

Hi,
Given a business object type (e.g. BUSxxx), is there any Function Module that can be used to get the table name for that object ?
Have been through the SWO* FM's but did not get anything yet.
Pls let me know how this can be done.
Regards,
-Kev.

>
Kelevenwise wrote:
> Thanks Christine for the response..
> Let me add a few more details to clarify my requirement
>
> I need to read the data of business objects (not a specific one, but the application should be able to read data of any business object). Given a table name, I am able to figure out the column information and read that data. But all I have is the business object type, so would need to figure out all the tables (as you helpfully pointed out, there could be more than 1 for a business object) and then read from those tables.
>
> The reason I feel I cannot use the business objects methods directly is because I would not know which method to call to get me the relevant data - this is an external application, not called from within the system.
>
> Is there another way to achieve this requirement ?
>
> Regards,
> - Kev.
So, assuming for the moment we are just dealing with the PO BUS2012 business object, your external application will be passing you a BO type and also (presumably- otherwise you could be sending back an awful lot of data) a BO key, and you then want to send back all the detail for PO - exactly what the GetDetail method that is present on most objects does - is that right?
Since most BOs have a GetDetail method, can't you just use that?
Though I really can't see why your external application would be interested in all SAP BOs - most applications are a bit more specific than that.

How to find out the conversion exit format for VBRP-VRKME

Hi Gurus,
           I am writing a report to fetch delivery details based on storage location'123'. My requirement is tat i shud convert the Billed Quantity unit TO Base unit of measure. In my VBRP table the field value/contents of VBRP-VRKME have values PAK for PAC( packets) and KAR for CAR(carton). When i click on User-specific Settings - - Check the filed CHEECK CONVERSION EXITS , i am able to get see the PAC and CAR respectively.
      But unfortunately when i selecting te fields form vbrp in my internal table i am getting the values 'PAK' for PAC and 'KAR' for CAR'. AS i am writing a report can any one suggest me how to convert this , as i wud b making use of FM MD_CONVERT_MATERIAL_UNIT to convert to base unit of measure, n this FM is not accepting the values like PAK and CAK.
      Your Sugesstions are of utmost importance for me.
Thanking you,
ZIa

Hi,
Conversion routines are maintained at Domain Level(Definition Tab), Meins is the domain for VRKME data element.
You have to use the following routines,
CONVERSION_EXIT_CUNIT_INPUT
CONVERSION_EXIT_CUNIT_OUTPUT
Regards
Srini

How to find out the infospoke name for an existing infoobject?

Hi,
Could any one pls tell me how to find out the existing infospoke name for an infoobject?
i've tried with where used list but its not coming....can any one pls suggest
Thanks,
Suri

Hi,
Check in metadata repository for that infoObject.
If you are still not able to identify, goto RSBO tx and press F4.
You will get the list of Infospokes available.
Go in each and chk from the General Tab, if the infoObject is available in the source system.
Regards,
Balaji V

How to find out appropriate user exit

Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
Basu

Look for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM

Hi all, How to Find out the table where Cutomer Enqu. status is Stored??

How to Find out the Customer Inquiry Status.
I am not able to find in which table Status of Customer Inquiry is Stored.
Is There any FM to find out This.

Please post your question in the right forum to have your query addressed soon...
I think you can check JEST table all status

How to find out default screen variant name

Hi All,
For particular sales order creation I want to find out which screen variant has been used.
I have tried using SHD0, with entering Transaction code as VA01 but in that for Transaction variant field there are 5 different transaction variant names are mentioned.
Please guide me how to find out the transaction variant name used in va01 for particular sales order.
Thanks and regards,

Hi,
Goto VOV8 T.Code.
Select your order type.Details.
Check what is the transaction variant assigned to your order type.
It is used while creating the order.
This field is present in transaction flow tab.
Regards,
Krishna.

How to find out the Tcodes for the exits

Hi All,
how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
Customer Exits: EXIT_RFEBBU10_001
                          EXIT_RFEKA400_001
                          EXIT_RFFOEXIT_100
User-Exits: USEREXIT_DELETE_DOCUMENT
                   USEREXIT_FIELD_MODIFICATION
                   USEREXIT_MOVE_FIELD_TO_VBAK
                   USEREXIT_PRICING_PREPARE_TKOMP
BADI: CUSTOMER_ADD_DATA_CS
          HISTORICAL_VALUES
          MD_ADD_ELEMENTS
          MD_CHANGE_MRP_DATA
          MD_PIR_FLEX_CONS
          MD_PLDORD_POST
          ME_REQ_POSTED
          NOTIF_EVENT_SAVE
Can anyone help on this <urgency factor removed>.
Regards
Ksihore
Edited by: Suhas Saha on Feb 20, 2012 12:58 PM

i have just started reading about all these-user exits ,customer exits etc.
i have read somewhere that:call to customer exits are triggered by function modules exits.
the structure of function modules are like this:
EXIT_RFEBBU10_001
MEANS
Keyword EXIT followed by program name fllowed by three digits.
and the call is like this:
call customer function 0001.
From above we can conclude that this customer exit must be used in program RFEBBU10.
GOTO SE38 andenter prog name RFEBBU10.check for above function module.
for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
using Where used lists.
please Tell me if i m wrong!

How to find out the standard info stucture for a customized IS in LIS

Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
Saddy

Hi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy

How to find out the customer exit name

Similar Messages

Maybe you are looking for