How to find out the current form name

Hi all,
I have to pass the current sapcript form name in the sauroutine pool for some further processing.
I just wanted to is there any variable, method, or way to find out the current/running Sapscript form name generically so that we can pass it on to subpool.
Looking forward for your reply.
Regards,
Anuja.

Hi All,
Many thnaks for your replies.
Actually in my case the situation is, i have to change in multiple forms.
I mean the same perform needs to be used in all the forms almost around 20 using the current form name.
So that perform should be generic. I mean is there any variable/ method or way to get the current form name so that we can pass that to the subroutine pool through form.
Looking forward for yoour reply.
Regards,
Anuja.

Similar Messages

  • How to find out the  particular   form available language?

    hi ,
    how to find out the  particular   form available language?
    pls could u clirify the dought.
    regards
    eswar

    I guess you wrongly closed the thread without any answer.
    utilities --> version, it will give all the list of languages of SAPScript.
    Or goto SE71,
    Press F4, in place of form name and goto unclassified forms, you will see all form names with available languages.
    Regards,
    Sairam

  • How to find out the Target Component name and Target view name

    Hi All Expert,
                      I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
    Thanks in Advance....
    Vishwas Sahu

    Hi Vishwa,
                 The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
    CASE iv_property.
        WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
          rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
        WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
          rv_value = 'EXAMPLE'.
    Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
    This is a huge topic and  i have just mentioned you basic things.
    Regards,
    Bharathy.

  • How to find out the current hostname?

    How do I find out the current hostname for a given SoaSuite installation?
    Peter

    You can check the WSDL of any of your BPEL processes on BPEL console.

  • How to find out the current number of rows in a form without navigation

    Hi.
    Is there any way to count the rows in a form (block) without navigation to the last record?
    I am modifying CUSTOM.pll and have to count the rows before user commits changes.
    All records are new in this case. Can anyone halp me? Thanks.
    Regards
    Tomáš

    Magoo wrote:
    no, such a block-property ^unfortunately^ does not exists.
    you can just go to to the block, call the last_record build-in and find out, where the cursor is.
    But with this you call restrictred procedures and their are not everywhere allowed ...
    If you execute a query on a block, may not all records getting retrieved from database.
    For this forms does not know, how many records are really in the block and
    for this there is no build-in like get_block_property ( records_count ).It does exist indeed. GET_BLOCK_PROPERTY('BLOCK',QUERY_HITS);
    Of course, this will return the number of records that would get fetched to the block (based on the where condition), but not the records with NEW status (i.e new records which are not yet committed).
    -Arun

  • How to find out the current workspace?

    Assume I have a couple of possible workspaces on my harddisc.
    Can I find out for a JDev installation which of them is currently used?
    Peter

    respect...
    you didn't explain yourself properly. I too wondered if you were writing a JDev extension which this is a common question that comes up. Use case is everything when it comes to helping people to understand what you are trying to achieve.
    If you hold your mouse over your application or project file icon in the application navigator it displays the full path of the current workspace/project.
    Brenden

  • How to find out the current index

    Hello Experts,
               How to find the current index and whatever we entered in that table how to ratrieved that entry value.pls give the suggest..

    Hi,
    To get current index write below piece of code in the outbound plug for your F4 help pop up.
    We have to write this in the outbound plug itself otherwise it will not work.
    let me know whethere it worked or not
    cl_chtmlb_config_utility=>outbound_plug_event_info( EXPORTING iv_event_string = lv_event_string
                                                          IMPORTING ev_index        = gv_index ).
    Regards,
    Swapna

  • Given a business object type, how to find out the underlying table name ?

    Hi,
    Given a business object type (e.g. BUSxxx), is there any Function Module that can be used to get the table name for that object ?
    Have been through the SWO* FM's but did not get anything yet.
    Pls let me know how this can be done.
    Regards,
    -Kev.

    >
    Kelevenwise wrote:
    > Thanks Christine for the response..
    > Let me add a few more details to clarify my requirement
    >
    > I need to read the data of business objects (not a specific one, but the application should be able to read data of any business object). Given a table name, I am able to figure out the column information and read that data. But all I have is the business object type, so would need to figure out all the tables (as you helpfully pointed out, there could be more than 1 for a business object) and then read from those tables.
    >
    > The reason I feel I cannot use the business objects methods directly is because I would not know which method to call to get me the relevant data - this is an external application, not called from within the system.
    >
    > Is there another way to achieve this requirement ?
    >
    > Regards,
    > - Kev.
    So, assuming for the moment we are just dealing with the PO BUS2012 business object, your external application will be passing you a BO type and also (presumably- otherwise you could be sending back an awful lot of data) a BO key,  and you then want to send back all the detail for PO - exactly what the GetDetail method that is present on most objects does - is that right?
    Since most BOs have a GetDetail method, can't you just use that? 
    Though I really can't see why your external application would be interested in all SAP BOs - most applications are a bit more specific than that.

  • How to find out the current VM Version?

    hi
    I want to find out with witch VM Version my java application runs.
    what methods or syntax do I need to get the VM Version as a return value.
    thanx in advance for the replies.

    Hi! Look at the docs for the getProperties() method in the java.lang.System class. It lists several properties related to the VM that you can retrieve at run time.
    Hope this helps!
    Cheers!

  • How to find out the customer exit name

    Hi Friends:
    I've an include ZCAXXI_USEREXIT_F05. How can I find that in which exit this include is present. Is there any table? Also where from I can find the name of the project once I find the exit name.
    Suitable points will be rewarded.
    Regards:
    Gaurav

    Hi,
    Go to se38 and give your include name. Click on where used list (CTrlshiftf3). Then you will get the main program. From the main program you will get the function module exit.
    If you know the exit name then follow the below steps to get the project:
    Go to se11>enetr 'Modsap' table name>give your function module eg EXIT_SAPLCOZF_001 in the member field then you will get the Enhancement i.e COZF0001 For that.
    Then Go to se11-->modact -->here in memeber field enter COZF0001 then you will get the project name(if a project is there for that enhancement)
    Reward points if useful.
    Regards,
    Soumya.
    Edited by: Soumya Jose on May 26, 2008 1:36 PM

  • How to find out the current  screen resolution/width in webdynpro.

    HI,
    Can any one please tell me how to get the screen resolution in webdynpro?
    Regards
    -Sandip

    Hi Sandip,
    - view size can be set by setting the 'width' of the RootUIElementContainer. By defalut, it will be 100% only. Also, It is always better to use the % coz it does not distort your view with different screen resolutions.
    - while creating the iview, you have the property like 'HeightType'. There you can set the value as FIXED, AUTOMATIC & FULL_PAGE. If you wish, you may leave it as it is.
    - All you have the properties like 'Fixed Height' etc to set the size values.
    Regards
    Chander Kararia
    # Please close the thread once get the correct answer. Give rewards for answers.
    Edited by: Chander Kararia on Feb 20, 2009 9:55 AM

  • How to find out the infospoke name for an existing infoobject?

    Hi,
    Could any one pls tell me how to find out the existing infospoke name for an infoobject?
    i've tried with where used list but its not coming....can any one pls suggest
    Thanks,
    Suri

    Hi,
        Check in metadata repository for that infoObject.
    If you are still not able to identify, goto RSBO tx and press F4.
    You will get the list of Infospokes available.
    Go in each and chk from the General Tab, if the infoObject is available in the source system.
    Regards,
    Balaji V

  • Does anyone have any idea how to find out the version of weblogic plugin

    Does anyone have any idea about how to find out the current version of weblogic plugin used to connect from webserver to weblogic server?
    I could not find version in plugin directory.
    it's the same one that came prepackaged with Weblogic 9.2. we haven't change it.
    Sun One 6.1 SP6
    Weblogic 9.2
    Solaris 5.10
    Edited by: 985608 on 01-feb-2013 8:20
    Edited by: 985608 on 04-feb-2013 6:25
    Edited by: 985608 on 04-feb-2013 6:27

    Hi,
    You can find version of weblogic plugin using below command.
    strings <plugin module file> | grep -i wlsplugins
    Mark if this helps.
    Regards,
    Kishore

  • How to find out default screen variant name

    Hi All,
    For particular sales order creation I want to find out which screen variant has been used.
    I have tried using SHD0, with entering Transaction code as VA01 but in that for Transaction variant field there are 5 different transaction variant names are mentioned.
    Please guide me how to find out the transaction variant name used in va01 for particular sales order.
    Thanks and regards,

    Hi,
    Goto VOV8 T.Code.
    Select your order type.Details.
    Check what is the transaction variant assigned to your order type.
    It is used while creating the order.
    This field is present in transaction flow tab.
    Regards,
    Krishna.

  • How to find out the users currently logged into ODI

    Hi all,
    How to find out the users currently logged into ODI Work Repository?
    Thanks.

    Hi,
    It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
    Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
    I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
    Thanks,
    katukota

Maybe you are looking for