Windows of excel and word pop up on desktop.i have unchecked the option for windows on pop.

windows of excel and word pop up on desktop.i have unchecked the option for windows on pop.but still dey show up

Whaat version of Mac OS X?
When do the windows show up?

Similar Messages

  • TS1389 I keep getting a message telling me my ipad cannot be synced because my computer is not authorised for items purchased on this i pad. I tunes tells me it is authorised and o have follewed the sugestions for windows 7 and it stil wont sync.

    My ipad wont sync when i try to put old apps back on, it tells me my computer is not authorised for purchased items for this ipad. I have followed the steps for windows 7 but it stil wont sync. I tunes tells me the computer is authorised. What can i do?
    Cheers pete.

    I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
    Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
    No answers here, but you are definitely not alone with this issue.

  • HT1338 I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for windows to complete installation it will hook at that stage please i need help.

    I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for window to complete installation it will hook. the installation cannot be able to complete and i really install windows on it, please i need an assistance on how to go about it.

    Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
    I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
    Thanks to BobTheFisherman for the link.
    There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
    Give it a try. You might like it or it may not be your cup of tea.

  • Im From United Arab Emirates and I would like to purchase mini Ipad, however, the option for buying doesnt appear for me ?! is there a list of countries !!!!!?

    Im From United Arab Emirates and I would like to purchase mini Ipad, however, the option for buying doesnt appear for me ?! is there a list of countries !!!!!?

    Unfortunately, Toshiba USA doesn't ship there, and it's not available to download. You'd have to see if there's a third-party that could sell you it or have someone you know in the US order it and then ship it to you. Sorry.
    - Peter

  • Do not find the option for windows when I press the the option key during restart, since I downloaded Lion

    I still do not find any option for windows when I restart my mac when pressing the option key.  It used to go to windows when I pressed the option key during a restart but since I have downloaded Lion, it always go to mac.  I do not want to make a permanent switch. ANy suggestions on how to get back to using the option key?

    You probably need to reinstall your Windows machine.
    I'm not certain, but I have a feeling the install of Lion wipes it out, going by the number of threads started along similar lines since Lion's release.

  • Firefox is blocking popups that I want to see, even after I have unchecked the Block Popup Windows in Options.

    There are several sites that provide popups that I want to see. Firefox had not been blocking them previously. Then today it did. I went to Options and listed these sites as exceptions. It still blocked them. I went to options and unchecked Block Popup Windows. It still blocked them. I uninstalled Firefox and reinstalled a new copy. It still blocks them. What do I do now?
    BTW, this does not occur when I access the same sites with Internet Explorer.

    I have the same issue. I am using windows 7 ultimate and have it on a laptop which has no issues. It is only one pop up i want to come up and it blocks it. I am using zone alarm as well, and I turn it off and it makes no difference. IE works and I HATE Microsoft. I wish Mozilla would come up with a fix.

  • How do I get Windows XP onto my new mac running lion when boot camp only gives me the option for windows 7

    Hi   I have been trying to partition my hard drive on my new Mac so that I can run some windows specific programs and I wanted to use Windows Xp because I beleive it to be suitable for my needs + becuase its now an older OS it's cheaper.
    My version of Mac is running the Lion operating system and when I start up the boot camp assitant I only get the option to install windows 7. If I proceed and put in the XP installer disc I get a message "Installer disc not found- insert disc and wait a few moments".
    The Xp disc is supposed to be a full version- at least thats what the guy who sold it to me claims, anyone any solutions on how to proceed or do I have to buy Windows 7?
    Chris

    With OSX Lion Apple has removed support for Windows XP and Windows Vista from BootCamp.
    That leasves only Windows 7 as a viable option to use.
    You can however use Virtualization apps like the free VirtualBox to install and run XP on your Mac.
    Commercial ones are Parallels and VMWare Fusion.
    Stefan

  • My program of iTunes for Windows 7 have not the option for ringtone, can you help me? the option for

    Hi! I've  a problem with my new program Itunes for Windows 7. I've Download the app ISuoneria and i followed the procedure to make my ringtone. But when i wont import the new file on my iphone, there isn't the option Ringtones. I've just download a new version of the Itunes, but don't change. Can you help me?
    Thanx so much!!

    It's now called Tones.  Go to iTunes menu EDIT/PRFERENCES under GENERAL tab, check the Tones Box under Library source to display Tones library in iTunes.

  • I would like to open links in a new window but cannot find where to put the setting. Have unchecked the "Open new windows in new tab instead" box in the Options dialog box.

    When I click a link on a webpage or other software, I would like for it to open in a completely new window.

    You can hold the Shift key and click the left mouse button a link to open that link in a new window.
    The setting in Tools > Options > Tabs is only for links that specify a target window and you can divert such a link to a new tab instead.

  • Microsoft excel and word do not run

    my microsoft excel and word does not work and i can't keep my files current

    frankwithrow wrote:
    my microsoft excel and word does not work and i can't keep my files current
    Hi,
    What is the version of Excel and Word ? Did you pay Microsoft to use the products ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Why are the options for "When Firefox starts" NOT clickable in Firefox 5? I want to choose "Windows and tabs that where opened last time you accessed the net" but Firefox won't let me.

    In the previous version of Firefox one could choose to save tabs so that when Firefox opened, all the tabs from the previous sessions appeared. This was done in Settings > Options > General > Startup. In the menu for the "When Firefox Starts" one had the option for "Windows and tabs that where opened last time you accessed the net." in Firefox 5.0, this menu is gray and not clickable. Help, please?

    ''Why are the options for "When Firefox starts" NOT clickable in Firefox 5?"
    Possibly you are not saving your "browsing history" which is what the session history is tied into.
    '''Not saving History''' -- check your settings for '''Tools > options > Privacy'''', make sure you are not clearing more than just cache in "Settings for Clearing History"
    * http://img232.imageshack.us/img232/4928/clearcachew.png
    * clearing your history at end of session, cache is the only one you would want to clear at end of session, if you don't want to lose things
    There are several things that are related to private browsing and not saving History
    * Private Browsing Ctrl+Shift+P
    * You selected "Never remember history" in first drop-down of Tools > Options Privacy and all of the check marks disappear (See picture above)
    * "Permanent private browsing mode" was check-marked under "Use custom settings for history" in the first drop-down of Tools > options > Privacy (see picture above)

  • Not enough memory or disk space in excel and word office 365

    I have windows 8.1 and am having huge issues with excel and word in office 365.
    When i download a document i am unable to open as message reads cannot open as not enough memory or disk space.
    I have plenty of disk space and memory however have searched this and the following has been answered BUT I CANNOT UNDERSTAND This and need HELP  with step by step instructions on how to do please;
    To resolve the issue, refer to the methods below:
    Go to this key on Registry Editor (Run | Regedit)HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User
    Shell Folders
    change key Cache to something like C:\Windows\Temp
    You might also right click on the file with file explorer, choose Properties, then General tab and click on the Unblock button.
    Some of our customers found it sometimes a permission problem.
    cmd  => dcomcnfg
    Click >Component services >Computes >My Computer>Dcom config> and select micro soft Excel Application>
    Right Click on microsoft Excel Application>Properties>Give Asp.net Permissions
    Select Identity table >Select interactive user >select ok
    However i do not understand a word of the above or how to do PLEASE HELP this is extremly frustrating as i am doing correspondence and I am unable to access any files.
    Thanks

    Hi,
    You must have read this thread:
    http://social.technet.microsoft.com/Forums/en-US/9773a7c4-29a8-48ff-9d16-e1ca4c478610/excel-2013-microsoft-excel-can-not-open-or-save-anymore-documents-because-there-is-not-enough?forum=officesetupdeploy
    To detail the steps, please do as I describe:
    Important
    This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the
    registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
    http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
    To open the Registry Editor, please press Win + R, type regedit in the blank box, press
    Enter. / Or we can type regedit.exe in Windows 8.1 Search, you'll find it easily.
    Now the Registry Editor is open.
    Then we see the pane on left, expand the following path:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
    Then we can see a list on right, find Cache, right click on it, click
    Modify..., under Value data, change the value to something like
    C:\Windows\Temp, click OK.
    Exit Registry Editor.
    As for "You might also right click on the file with file explorer, choose Properties, then General tab and click on the Unblock button." Just find the file, right click on it, choose
    Properties, under General tab, if you see a
    Unblock button, click on it.
    "Some of our customers found it sometimes a permission problem.
    cmd  => dcomcnfg" Do the following:
    Press Win + R, type in cmd in the blank box, press
    Enter.
    In the new black-background window, type in dcomcnfg, press
    Enter.
    Then the Component Services window will pop up, on the left pane, expand
    Component services -> Computes ->
    My Computer -> Dcom config -> and select
    Microsoft Excel Application, right click on it -> Properties ->
    Identity tab -> Select The interactive user ->
    OK.
    I hope I've explained the steps clearly.
    Good luck.
    Regards,
    Melon Chen
    TechNet Community Support

  • Interaction between Excel and Word OLE

    I am using Office 2007 to write procedures but a problem is apparent only when run on Office 2013.
    A procedure in a workbook that records Sales information runs to transfer data to another workbook that stores Invoice information, and then opens Word to generate a mail merge document from a template (dotm) which has an event procedure (on Open) to merge
    data from the Invoice spreadsheet into a document to produce an invoice.  This procedure works without problem on the Office 2007 (Vista) machine and until recently likewise ran without problem on the Office 2013 (Windows 8.1) machine.  However,
    apparently following an automatic update to the Office 2013 machine, when the Word document is generated the procedure "hangs" at the point of reading the data from the Invoice workbook, and after a longish delay a message is generated along the
    lines of the program awaiting an OLE action.  The only way to stop the whole process is via task manager.
    After much research I have found that on the Office 2013 machine, the mail merge of data from the Invoice workbook will not now work if the Invoice workbook is open, bot works OK if it is closed.
    I have therefore programmatically closed the Invoice workbook, and the procedure now works on the Office 2013 machine (and on the Office 2007 machine).  However, I would like the Invoice workbook to be open when the Word document has been generated. 
    I therefore inserted a few seconds wait into the procedure to allow the mail merge to be completed, then tried to reopen the Invoice workbook.  I now get the message that the Invoice workbook is locked for editing, and asking if I want to open a read
    only copy (which I don't).  The Invoice workbook does not appear on the task bar, nor does it appear in task manager.  I have tried code to make it active and I then get "subscript out of range", and I have tried code to make it visible
    and I again get "subscript out of range".  However, if I close down the word documents generated with the data from the Invoice workbook, I can then open it;  presumably the merge process is treated as still being in progress while the
    documents are open, and the Invoice workbook is "released" when the documents are closed.
    Has anyone any advice to offer on how to deal with this problem of not being able to open the Invoice workbook while the mail merge documents are open.  The problem is apparent in both Office 2007 and 2013.

    Hi Caillen
    Thanks for looking at this.  I should explain that I do all my work on an Office 2007 machine for a family member who lives elsewhere, so I don't have direct access to the Office 2013 machine.  However, they are reasonably computer literate and
    report faults accurately.  To deal with your queries:
    1.  Their Office (and Windows) updates are installed automatically.  Basically, their systems are kept up to date.  It is only a guess that an update may have caused the problem, for the procedure worked as expected for some months and no
    other changes have been made.  The problem does not occur on my Office 2007 machine.
    2.  For the initial problem there was no error message initially;  the little circle just kept going round for a minute or so, then a message appeared on the Office 2013 machine saying that Excel was waiting for another program to complete an OLE
    action.  That message no longer appears because I have cured the problem by closing the workbook that is the data source for the mail merge.
    3.  I do indeed mean VBA code by procedure (Sub xxx()).  The code in the Word Template on which the procedure originally hung up was the third line below - i,e, the line starting ActiveDocument.MailMerge.OpenDataSource Name:= _
    Sub ctPrintInvoice()
        ActiveDocument.MailMerge.MainDocumentType = wdFormLetters
        ActiveDocument.MailMerge.OpenDataSource Name:= _
            ThisDocument.Path & "\ColTarInvoices.xlsm", _
            LinkToSource:=True, _
            Revert:=False, _
            Format:=wdOpenFormatAuto, Connection:="DETAILS", _
            SQLStatement:="SELECT * FROM `'Print Invoice$'`", SQLStatement1:=""
    "DETAILS" is a named range within the workbook that is the data source for the mail merge.  "Print Invoice" is the name of the worksheet that holds the data.  This code runs as an event on opening the document, which is done
    automatically within the code in the workbook.  The code in the Sales workbook to open the document is:
        Set objWord = CreateObject("Word.Application")
        If strSourceSheet = "Sales" Then
            Set objctMergeDoc = objWord.Documents.Add(ThisWorkbook.Path & "\ctInvoice1.dotm")
        ElseIf strSourceSheet = "Euro Sales" Then
            Set objctMergeDoc = objWord.Documents.Add(ThisWorkbook.Path & "\ctEuroInvoice1.dotm")
        End If
        objWord.Visible = True
        Set objWord = Nothing
        Set objctMergeDoc = Nothing
    However, the procedure also hung in the same place on the Office 2013 machine if the document was opened manually.
    4.  The code in the Sales workbook to close the Invoice workbook is:
       Workbooks("ColTarInvoices.xlsm").Close
    The code to reopen it is:
       Workbooks.Open (ThisWorkbook.Path & "\ColtarInvoices.xlsm")
    This generates the message that the workbook is locked for editing.  The same message is generated if I try to open the workbook manually while the merged documents are still open.
    (The files are all in the same folder)
    With thanks
    Andy C

  • My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

    My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

    Then try DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • How can I download excel and word

    I need work in excel and word in my iPed - please guide

    You cannot download or install Word or Excel for the iPad. MS has not released an iOS version.
    There are MS Office compatible apps available in the app store like Quick Office Pro and Documents to Go. Take a look at those and see what you think. Apple also has their iWorks suite of apps, Pages, Numbers and Keynote that are compatible with the MS Office apps.

Maybe you are looking for