How to find out the mobile number of the mobile phone?
Hi,
I have a question concerning the mobile number of the mobile phone a pushregistry application is installed on.
At first start of the program i do a HTTP GET Request to a webserver. I would like to send the mobile number from the mobile phone in order to identifty the request stamps from.
Thanks
Are you serious? But you can receive SMS, and you can send SMS, both of them should now where they go to or where they stamp from?
Can't I use WMA in any way to obtain the number?
I mean, if I can send an sms to someone then I should be able to determine my mobile number?
One way to solve this problem: I could send an SMS to a static number, this client sends back an SMS with the receiver number within the payload text..
but isn't there a more elegant solution?
Similar Messages
-
How to find out the Number range object for Incident number
How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanyaHI, an example.
data: vl_num type i,
vl_char(6) type c,
vl_qty type INRI-QUANTITY,
vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
NR_RANGE_NR = '01'
OBJECT = 'ZRG0000001'
QUANTITY = '1'
SUBOBJECT = ' '
TOYEAR = '0000'
IGNORE_BUFFER = ' '
IMPORTING
NUMBER = vl_num
QUANTITY = vl_qty
RETURNCODE = vl_rc
EXCEPTIONS
INTERVAL_NOT_FOUND = 1
NUMBER_RANGE_NOT_INTERN = 2
OBJECT_NOT_FOUND = 3
QUANTITY_IS_0 = 4
QUANTITY_IS_NOT_1 = 5
INTERVAL_OVERFLOW = 6
BUFFER_OVERFLOW = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard -
How to find out the number of songs in my iTunes 11 library
How to find out the number of songs in my iTunes 11 library
Welcome to the Apple Support Communities
To see the number of songs, go to View menu > Show Status Bar, so the number of songs you have will appear at the bottom of the iTunes window -
How to find out the Idoc number triggered for any material transfer frm SAP
Hi Folks,
Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
Do we have any navigation for that in MM03?
Thanks,
SPMD.Hi Shabbirmdpasha,
If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
Also would suggest to post the same in abap forums for more answers:
ABAP Development
Regards,
---Satish -
How to find out the IDOC number(urgent)
hello every one,
i had recived all the data to BW from R/3 but the request is still running in the system
for this <b>i need to manually release the IDOC for BD87</b>
can any one please help me <b>How to find out the Idoc Number in R/3 and In BW for the particular load</b>
Regards
Sandyhi Siva,
thanks for ur valuable answer,
it is showing IDoc num for the succeeded one....
my present error is Data pack 1 got error and Datapack 2 was success,
their 3IDocs are their in detail tab all are success
as per my knowledge it will for the Data pack 2 and it is showing 3different
how can i find the Idoc which was struck .....
that need to process manually in BD87..
please suggest if i am wrong
Regards
Sandy -
How to find out the n number of records inserted??
In File to JDBC Scenarios, i am inserting n records in Oracle.
How to find out the n number of records inserted??Hi,
If you are using the statement "UPDATE_INSERT", get the response on element <insert_count>count</insert_count>. It will give you the inserted rows.
This link can be very helpfull.
[http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm]
regards.
roberti -
How do find out the number of rows
how to find out the number of rows of as all tables in a schema with one sql statement
Hi,
What u can try doing is...
declare
numrows number;
begin
for i in (select tname from tab)
loop
execute immideate 'select count(1) into numrows from ' | | i.tname ;
dbms_output.put_line(numrows);
end loop;
end;
Hope this helps. This works only in 8i. So if u need to do the same in 8.0 u have to use dbms_sql pkg.
The logic is same but the way u open ands execute the code is a bit diff.
Best Of Luck.
Regards,
Ganesh R -
How to find out the Transactions used per month & the USER who used that
Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type : Report *
*****& Title : Z_ABAP_TCODE_MONITOR *
*****& Transaction code : ZTCODE_USAGE *
*****& Developer name : Shailendra Kolakaluri *
*****& Deveopment start date : 26 th Dec 2011 *
*****& Development Package : ZDEV *
*****& Transport No : DEVK906086 *
*****& Program Description : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
layout TYPE slis_layout_alv,
variant TYPE disvariant,
events TYPE slis_t_event WITH HEADER LINE,
heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date TYPE swncdatum,
user TYPE swncuname,
mandt TYPE swncmandt,
tcode TYPE swnctcode,
report TYPE swncreportname,
count TYPE swncshcnt,
END OF zusertcode.
*data : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
wa_usertcode TYPE swncaggusertcode,
wa TYPE zusertcode,
t_ut TYPE STANDARD TABLE OF zusertcode,
wa_result TYPE zusertcode,
t_result TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
EXPORTING
component = 'TOTAL'
ASSIGNDSYS = 'DEV'
periodtype = 'M'
periodstrt = month
TABLES
usertcode = t_usertcode
EXCEPTIONS
no_data_found = 1
OTHERS = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
wa-user = wa_usertcode-account.
IF wa_usertcode-entry_id+72 = 'T'.
wa-tcode = wa_usertcode-entry_id.
wa-report = space.
ELSE.
wa-tcode = space.
wa-report = wa_usertcode-entry_id.
ENDIF.
COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname = 't_ut'.
fcat-fieldname = 'DATE'.
fcat-seltext_l = 'Date'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'MANDT'.
fcat-seltext_l = 'Client'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'USER'.
fcat-seltext_l = 'User Name'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'TCODE'.
fcat-seltext_l = 'Transaction Code'.
fcat-key = 'X'.
APPEND fcat.
ENDFORM.
*& Form SET_LAYOUT
text
--> p1 text
<-- p2 text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM. " SET_LAYOUT
*& Form GET_EVENT
text
--> p1 text
<-- p2 text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM. " GET_EVENT
**& Form GET_COMMENT
text
--> p1 text
<-- p2 text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM. " GET_COMMENT
**& Form top_of_page
text
--> p1 text
<-- p2 text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = heading[]
I_LOGO =
I_END_OF_LIST_GRID =
*ENDFORM. " top_of_page
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
is_layout = layout
it_fieldcat = fcat[]
i_save = 'A'
is_variant = variant
it_events = events[]
TABLES
t_outtab = t_ut
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_DATA -
How to find out the "manufacture date"?
Hello!
Can you tell me how to find out the manufacture date of my Satellite A110-334 with the serial "SY6224123K"?
I need this information for my insurance!
I found only this link for HDD`s: http://www.storage.toshiba.eu/index_manual.php?pid=220&sid=536&la=en
But there is no "S" on the first digit!??
So it is maybe "Y6" which can be November 2006! Is this right?
Thank you!
===========
This is the information on the link above:
How to encode a Toshiba Hard Disk Drive Serial Number?
The Toshiba serial number (S/N) includes details of the date of manufacture. The first digit of the serial number indicates the Month of manufacture and the 2nd digit indicates the Year.
Example:
M Y x x x x x x x
M = Month
Y = Year
The month digit goes from 1, for January, through to 9, for September, and then X, Y and Z, for October, November and December.
Examples:
2 8 1 7 0 0 0 1 A
2 = February
8 = 1998
3 0 5 4 4 3 0 6 T
3 = March
0 = 2000
X 9 D 7 8 3 3 1 T
X = October
9 = 1999
The remaining digits contain information about factory and production line, and some digits are reserved for a continuously running serial number.Hello
Try with http://gedb.toshiba.com/
Let me know if you find info you need. -
How to find out the node count?
How to find out the node count in illustrator document through programmatically. Kindly advice me.
Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith -
Transaction IW32.How to find out the person name.(Last changed By)
Hi all,
When i executed the transaction IW32.Its displays changed by and created by fields. please any body can tell me how to find out the person name who had made last change with respect to the field changed by.
Please tell me the table and field name for the field last changed by......
Regards,
Munna.hi,
check the table AUFK field AENAM for the order number(AUFNR) in IW32.......... -
How to Find out the all tables in module wise ?
Dear Friends,
1.How to Find out the all tables in module wise ?
what are the total number of table in SAP ?
2. how to find out all existing functions in SAP ?
Thanks and regards,
Subasha Chandra Sahoo.Hi,
You will get the module wise list from:
http://www.sourceveda.com/SAPReference.htm
http://www.sourceveda.com/
Regards... -
How to find out the rows inserted between a time period.
Hi,
Please help me to solve this.
Table - emp.
Colmns - empno(Primary Key),ename, mgr
How to find out the rows inserted between a time period.
For eg:- Between 02-Oct-2006 1 PM and 03-Oct-2006 2 PM.
regards,
Mathew.Hi,
Maybe work:
For each row, ORA_ROWSCN returns the conservative upper bound system change number (SCN) of the most recent change to the row. This pseudocolumn is useful for determining approximately when a row was last updated. It is not absolutely precise, because Oracle tracks SCNs by transaction committed for the block in which the row resides
e.g.:
SGMS@ORACLE10> create table test(cod number);
Table created.
SGMS@ORACLE10> insert into test values (1);
1 row created.
SGMS@ORACLE10> insert into test values (2);
1 row created.
SGMS@ORACLE10> commit;
Commit complete.
SGMS@ORACLE10> insert into test values (3);
1 row created.
SGMS@ORACLE10> commit;
Commit complete.
SGMS@ORACLE10> select SCN_TO_TIMESTAMP(ora_rowscn),ora_rowscn,cod from test;
SCN_TO_TIMESTAMP(ORA_ROWSCN) ORA_ROWSCN COD
06/11/06 08:56:56,000000000 727707205 1
06/11/06 08:56:56,000000000 727707205 2
06/11/06 08:57:05,000000000 727707210 3Cheers -
How to find out the primary and failover DNS name
Hi;
This sounds very stupid, but could some one please tell me how to find out the name/dns name of the primary and failover server without using the CDS console.
any help is appreciatedIs this what you want?
$ /usr/lib/ldap/ldap_cachemgr -g
cachemgr configuration:
server debug level 0
server log file "/var/ldap/cachemgr.log"
number of calls to ldapcachemgr 12729
cachemgr cache data statistics:
Configuration refresh information:
Previous refresh time: 2005/08/07 23:54:59
Next refresh time: 2005/08/08 00:55:00
Server information:
Previous refresh time: 2005/08/14 15:15:00
Next refresh time: 2005/08/15 03:15:00
server: ldap1.example.com, status: UP
server: ldap2.example.com, status: UP
server: ldap3.example.com, status: UP
Cache data information:
Maximum cache entries: 256
Number of cache entries: 0
Gary -
How to find out the best settings for BDT
Hi there.
I am trying to predict a movie rating. I downloaded datasets from IMDb, prepared them. A tried all of the regression algorithms, but the best result is giving Boosted Decision Tree. Now I am dealing with the best settings in this algorithm.
With default, running time was 69 seconds and the mean absolute error was 0.4844, which is quite much I think. So I tried to improve it by changing parameters of the BDT module. I tried to set Leaves per tree to 150 and than experimentaly find
remaining parameters. I've come to Samples per leaf=12, Learning rate=0.04 and
Number of trees=700. Running time was 78 seconds and mean absolute error was 0.4596.
Input of the algorithm is joined matrix with 14 columns (11 features) and 67672 rows splitted into 70:30 (training:testing).
Is there any way how to find out the best setting of Boosted Decision Tree?Yordan's suggestion is correct, though the documentation is a bit outdated.
You can use the single parameter + sweeper mode or define your own custom ranges in the BDT module with the Parameter Range setting
Regards,
aK -
How to find out Inquiry document number in sales quotation
Hi all
my client have requirement that while creating quotation with reference to inquiry number the system should copy inquiry number in sales quotation it should be save into any particulates field so base on that he can configure output determination can any one help me how to find out Inquiry document number in sales quotation and what are the config step i need to do
Thanks and regards
rajeshHi raj
Firstly , In Sales header data you can see the preceding document feild but i am not sure in which tab .
Secondly, As far as document flow is concerned go to VA22 and then you will get the document number of the quotation and at the top you will get one small icon which is document flow , but i am, not sure with the shortcut but just check with Shift +F2. then you can see the flow
Regards
Srinath
Maybe you are looking for
-
How can I display the date and time from the playhead info as a subtitle ?
Is there any way it is possible to display the video capture data and time during playback. I have seen some discussion on creating subtitles to do this, it would be nice if one could simply add a Title template with display fields for playhead infor
-
How can I stream video from my laptop to apple tv while doing a different task on my laptop?
How can I stream video from my laptop to apple tv while doing a different task on my laptop? I want to be able to stream a video to my tv while browsing the internet or working on writing on my laptop. Thanks
-
HT4847 How to use iCloud as virtual storage
Sorry for my ignorance but does anyone know how to use iCloud as virtual storage for music n photos that I don't want on almost full iPhone? I have an iPad too and don't mind if these items are on there. Thx!
-
Downloading iTunes 8.0 causes error message
I downloaded iTunes 8.0 and now I get an error message that reads: "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of install other CD burning software. Please
-
Limit PO created in SRM changes to Service PO in ECC
Hi, I've created a limit PO in SRM, but when I viewed it the item category was 'D' (Service) instead of 'B' (Limit). Can anyone advise? Regards, John