How to find Process chain for event and parameter

Hi,
I have Event and parameter for the process, I wanted to know the which process chain does that process belons to.
Is there any table where I can see those.

Hi,
Try these tables.
RSEVENTCHAIN    Event Chain Processing Event Table 
RSEVENTHEAD     Header for the event chain 
RSEVENTHEADT   Header for the event chain 
RSPCCHAIN  Process chain details
RSPCCHAINATTR   Attributes for a Process Chain 
RSPCCHAINEVENTS   Multiple Events with Process Chains 
RSPCCHAINT   Texts for Chain 
RSPCCOMMANDLOG  System Command Execution Logs (Process Chains) 
RSPCLOGCHAIN   Cross-Table Log ID / Chain ID 
RSPCLOGS  Application Logs for the Process Chains 
RSPCPROCESSLOG  Logs for the Chain Runs
RSPCRUNVARIABLES   Variables for Process Chains for Runtime 
RSPC_MONITOR  Monitor individual process chains 
Hope this helps.
Thanks,
JituK

Similar Messages

  • How to find process chain using background job in sm37

    How to find process chain using background job in sm37

    Better is to select the job.
    Select (Define) Step (s) or F6.
    Select the line and Menu Goto>Variant.
    The variant contains the name of the CHAIN and its VARIANT.
    Success
    We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
    We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
    We could not find the scheduled job via SM37.
    Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
    We delete these entries via function BP_JOB_DELETE....
    Edited by: Jack Otten on Jul 9, 2010 2:50 PM

  • How to create Process chain for Aggregate for Master data

    Hello friends,
    I created Aggregates on Navigational Attributes.
    Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
    The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
    So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
    How to create process chains for the same ?????????
    Because if master data changes, then rolling up the aggregates straight forward will not help.
    So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
    If i mis interpreted something please rectify it.......
    Please advise

    Hello,
    the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically.  There is no need to deactivate them after master data loads.
    Best regards,
    Ralf

  • How to create process chain for 0EMPLOYEE

    I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

    Hi,
    Follow the following steps:
    1. Go to RSPC->create->give name and disc of your chain.
    Start Variant Creation
    2.  Now you will be prompted to give a start variant,create a  new variant(click on page icon )
    3.Change Selections->date/ time.
    4.give date and time for start of the chain.
    5.click the check box for periodic job->period values->daily->save->save
    Addition of process types
    6.Select the process type "Execute Infopackage"
    7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
    8.Attribute Change run will come automatically( if not then drag it as well and create variant )
    9.select the name of the infopackage which loads text data to 0EMPLOYEE.
    10.Attribute change run wil again follow.
    (connect the process types which are not connected,by right clicking the process types )
                                 start
                           IP A     IP  T
                          attr          attr
    A = attribute
    T = Text
    Please Reward points if useful
    Manish

  • How to create process chains for Master Data?

    I need information on " how we can create process Chains for Master Data"

    Hi Sachin,
      http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    and also Modelling aspects in process chains (ppt)
    https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
    Hope this helps.
    Srini

  • HOW TO CREATE PROCESS CHAIN FOR PSA ARCHIVING

    SDN EXPERTS,
    i like to create process chain for archiving. but i dont see any event for archiving when i go to create a process chain for PSA archiving. please let me know.
    thanks

    Hi,
    In the below document on the 14th page it says it is not possible to archive the master data & PSA.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f47fec9f-0501-0010-ce84-8a7231715ae6
    As per my understanding..
    But one thing you can do is use another ODS and load the same data that you're loading to something else and try to archive that data(Only if you have transformations in the current CUBE/ODS).
    Correct me if i was wrong and eloborate your requirement.
    Regards, Siva

  • How to Create Process Chain for Remote Cube.

    Hi,
              I created Remote info cube, data from ECC, loaded Successfully, I want to create Process Chain for Reomte Cube, Please Help me.
    Thanks,
    Nandish Gowda

    Hi Nandish,
    After initialization, th next delta will come as per your delta nature, if it is 0calday: Then your next delta will come tomorrow only.
    If you are able to 7 records in RSA3, why not in PSA( Why it's only 5 records). Analyze this closely.
    Sometimes, RSA3 exactly doesn't match with PSA because, RSA3 works on update mode F.
    Regards,
    Suman

  • How to create process chain with dso and infocube at a time

    hi friends,
      i have a FLATFILE in application server and i need to upload it to STANDARD DSO and i created a INFO PACKAGE and DTP for DSO.
    i have a STANDARD INFOCUBE to upload data from above DSO. here DSO is the source.  i want to schedule  this process in process chain. how could i do this. any one please give me solution.
         can any one explain me the options in RSPC and how they work and where we exactly use. this is very helpful to me. please give me guidance. thank you.
    thanks,
    sree

    First make sure you have already created the infopackage to load the data from server to the DSO and the DTP to load data from DSO to the Cube.
    Now goto Tcode RSPC.
    Choose Create process Chain option. provide appropriate technical name and description.
    Drag "Execute infopackage" process type from left hand side pane in RSPC.  Choose the infopackage to load the data from Server to DSO. you can find this infopackage using the F4 help in the above selected process type.
    Drag the "data transfer process" process type to load data from the Flat file data source above to the DSO.
    Then Drag the "Activate DataStore Request"  process type and select the DSO in which you would load the data  using the above DTP.
    Drag the "data transfer process" process type to load data from DSO to the Cube.
    Save, activate  and schedule the process chain according to appropriate time.

  • How to create process chain for this data flow

    Hi experts,
    My data flow is:
    ======================================
    2lis_11_vahdr->Transfer rules->2lis_11_vahdr->Update rules->DSO1->Transformation->DTP->Cube1.
    2lis_11_vaitm->Transfer rules->2lis_11_vaitm->Update rules->DSO1->Transformation->DTP->Cube1.
    ======================================
    2lis_12_vchdr->Transfer rules->2lis_12_vchdr->Update rules->DSO2->Transformation->DTP->Cube1.
    2lis_12_vcitm->Transfer rules->2lis_12_vcitm->Update rules->DSO2->Transformation->DTP->Cube1.
    ======================================
    2lis_13_vdhdr->Transfer rules->2lis_13_vdhdr->Update rules->DSO3->Transformation->DTP->Cube1.
    2lis_13_vditm->Transfer rules->2lis_13_vditm->Update rules->DSO3->Transformation->DTP->Cube1.
    ======================================
    Here for each datasource info package brings data upto dso and then from dso dtp fetches the data.
    For deltas i want to keep this data flow in process chain.
    Anyone please guide me how to keep this in a process chain.
    Full points will be assigned.
    Regards,
    Bhadri m.
    Edited by: Bhadri M on Sep 2, 2008 7:20 PM
    Edited by: Bhadri M on Sep 2, 2008 7:21 PM

    Hello,
    Sure it is possible to maintain that dataflow.
    Start here:
    This is a very good document about process chains:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
    Let me know if you have any doubts.
    Regards,
    Jorge Diogo

  • Need to find process chain from event

    Dear Experts,
    I need to find out all process chains which are getting triggered by a certain event.
    ( I have an event name , need to find corresponding process chain ).
    Kindly suggest.
    Regards
    Vaibhav Halde

    Hi,
    In SM37 you can find it, give event in SM37 an dsee the log. In the following blog you hav esome comments on the same so see the comments.
    How to trigger the Process Chains in BW from ECC
    /people/surendrakumarreddy.koduru/blog/2009/03/18/how-to-trigger-the-process-chains-in-bw-from-ecc
    Thanks
    Reddy

  • How to find process chain transport no

    Dear experts,
    I have made some changes in existing process chain and while saving it did not ask me for a transport request.
    So I want to check if the process chain has been created as local.
    Is there any way to check this. I was looking for some object directory option to check , but could not find.
    Please help.
    best regards,

    You can check this in various ways:
    1) simply go to transport connection in rsa1 and drag the process chain to right hand side...there you can see the transport number...
    2)Go to  rspc -
    > process chain from menu bar ---> attribute ---> last change by -> see object catelog--> hit the diplay button for person responsible -
    > there you can see the lock view

  • Process chain tables - how to find process chains

    I have an info cube; I want to know what are the process chains that are loading data into this info cube; how to find it using the tables? I want to know the specific rspc table to get this information
    thanks
    rajan

    Hello,
    RSPCCHAIN   Process chain details
    use this table ..
    Regards,

  • How to find Process chain

    Hi,
    I have  an infocube and also creted one   process chain on it.
    Now, my query is ,
    Can i know, in which process chain my info cube is used.(as  there are many process chains).
    Thanks,
    Naresh.

    hi,
    Select the infopackage of infocube in Transaction RSA1-->click on processchain button in menu bar.
    Rahul

  • How to find iPhoto2 files for backup and need iPhoto upgrade advice

    I have two questions:
    I am working on what I guess is an older version of iPhoto (2.0.1). I need to back up all my photos on CD and am having a hard time figuring out what directory to go to in order to backup everything. I've gone to the iPhoto library and copied the directory on a CD, but it was empty. The actual images seem to be hidden somewhere. I also use Photoshop CS and would like to use the backup images at a later time, so I'd like to be sure the actual jpegs are there and not just thumbnails, etc.
    Secondly, what should I upgrade to? Our son has taken video and I can't seem to access it with other programs once uploaded to iPhoto.
    Your help is much appreciated!!
    ~ Iva

    When i connect my ipod into my computer "unknown error occured(-54)" is keep appearing thats why i cant see my library in my ipod.. And i think locked items caused this.. I open once another program that for browsing files to for iphones and ipods and after that the unknown error keep appearing and some of my musics are in grey i cant even delete it

  • PROCESS CHAIN FOR REAL TIME DATA AQUISITION

    hi,
    how can i create a process chain for dso which is getting data from xi push
    i created a deamon which is having both infopackage and reat time dtp
    now i want to close the request for 24 hours
    i have 10 dso's in this way
    how to create process chain for this?

    hi,
    how can i create a process chain for dso which is getting data from xi push
    i created a deamon which is having both infopackage and reat time dtp
    now i want to close the request for 24 hours
    i have 10 dso's in this way
    how to create process chain for this?

Maybe you are looking for