How to find territory for a sales order?

Hello,
How do we find the territory for a sales order?
Please help.
Regards,
Sam

As you know, the territory keyflex is multi-segment so you'll need to adapt the following to show which segments you want. The SQL below prompts for OU org_id, order number and line number.
Regards,
Jom
SELECT
terr.segment1
FROM
hz_cust_site_uses_all ship_su
, hz_party_sites ship_ps
, hz_locations ship_loc
, hz_cust_acct_sites_all ship_cas
, oe_order_headers_all ooh
, oe_order_lines_all ool
, ra_territories terr
WHERE 1=1
AND ooh.org_id = &org_id
AND ooh.order_number = &order_number
AND ool.header_id = ooh.header_id
AND ool.line_number = &line_number
AND ool.ship_to_org_id = ship_su.site_use_id(+)
AND ship_su.cust_acct_site_id = ship_cas.cust_acct_site_id(+)
AND ship_cas.party_site_id = ship_ps.party_site_id(+)
AND ship_loc.location_id(+) = ship_ps.location_id
AND ship_su.territory_id = terr.territory_id(+)

Similar Messages

How to Find Credit Check Released Sales Orders /Deliveries?

Hi Gurus,
How to Find Credit Check Released Sales Orders /Deliveries for a particular Customer.
Regrds,
Binayak
Message was edited by: Binayak
Binayak Ghosh

Hi,
You can chech inthe Tcode VKM2 Released SD documents, and VKM4 SD documents.
reward if useful
Regards
syed

How to use Bapi for creating sales order

Dear All,
I am facing problem in creating Sales orders using BAPI.
Actually I am getting one file as an input and after validating the contents in the file i am preparing an internal table which has 6 fields - Customer number,PO Number,Material Number,Quantity,Price,Unit of measure.
Now my doubt is that while using BAPI_SALESORDER_CREATEFROMDAT2 , I am not getting how to pass PO Number and Customer number.
Please Help.
Regards,
Shweta

Hi shweta upadhyay
I have gone through you are post i have done some coding for creating sales order using bapi , I think it is helpful for you.
*& Report YOBJ_BAPI_SALESORDER
*& REPORT : CREATING SALES ORDER USING STANDARD BAPI
*& AUTHOR : S.PAVAN KUMAR INUMARTHY
REPORT YOBJ_BAPI_SALESORDER.
DATA : ORDER_HEADER_IN LIKE STANDARD TABLE OF BAPISDHD1 WITH HEADER LINE.
DATA : ORDER_ITEMS_IN LIKE STANDARD TABLE OF BAPISDITM WITH HEADER LINE.
DATA : ORDER_PARTNERS LIKE STANDARD TABLE OF BAPIPARNR WITH HEADER LINE.
DATA : RETURN TYPE STANDARD TABLE OF BAPIRET2 WITH HEADER LINE.
DATA : SALESDOCUMENT LIKE BAPIVBELN-VBELN.
*APPENDING VALUES FOR HEADER.
ORDER_HEADER_IN-DOC_TYPE = 'TA'.
ORDER_HEADER_IN-SALES_ORG = '1000'.
ORDER_HEADER_IN-DISTR_CHAN = '10'.
ORDER_HEADER_IN-DIVISION = '00'.
ORDER_HEADER_IN-SALES_GRP = '130'.
ORDER_HEADER_IN-SALES_OFF = '1030'.
APPEND ORDER_HEADER_IN.
*APPENDING VALUES FOR ITEM
ORDER_ITEMS_IN-MATERIAL = 'M-13'.
ORDER_ITEMS_IN-PLANT = '1000'.
ORDER_ITEMS_IN-SALES_UNIT = 'ST'.
ORDER_ITEMS_IN-DIVISION = '07'.
ORDER_ITEMS_IN-GROSS_WGHT = '28000'.
ORDER_ITEMS_IN-NET_WEIGHT = '28000'.
ORDER_ITEMS_IN-UNTOF_WGHT = 'KG'.
ORDER_ITEMS_IN-VOLUME = '0.780'.
ORDER_ITEMS_IN-VOLUNIT = 'M3'.
APPEND ORDER_ITEMS_IN.
*APPENDING VALUES FOR PARTNER
ORDER_PARTNERS-PARTN_ROLE = 'AG'.
ORDER_PARTNERS-PARTN_NUMB = '0000001000'.
ORDER_PARTNERS-COUNTRY = 'DE'.
ORDER_PARTNERS-TRANSPZONE = 'D000080000'.
APPEND ORDER_PARTNERS.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
*   SALESDOCUMENTIN               =
    ORDER_HEADER_IN               = ORDER_HEADER_IN
*   ORDER_HEADER_INX              =
*   SENDER                        =
*   BINARY_RELATIONSHIPTYPE       =
*   INT_NUMBER_ASSIGNMENT         =
*   BEHAVE_WHEN_ERROR             =
*   LOGIC_SWITCH                  =
*   TESTRUN                       =
*   CONVERT                       = ' '
IMPORTING
   SALESDOCUMENT                  = SALESDOCUMENT
TABLES
   RETURN                         = RETURN
   ORDER_ITEMS_IN                 = ORDER_ITEMS_IN
*   ORDER_ITEMS_INX               =
    ORDER_PARTNERS                = ORDER_PARTNERS
*   ORDER_SCHEDULES_IN            =
*   ORDER_SCHEDULES_INX           =
*   ORDER_CONDITIONS_IN           =
*   ORDER_CONDITIONS_INX          =
*   ORDER_CFGS_REF                =
*   ORDER_CFGS_INST               =
*   ORDER_CFGS_PART_OF            =
*   ORDER_CFGS_VALUE              =
*   ORDER_CFGS_BLOB               =
*   ORDER_CFGS_VK                 =
*   ORDER_CFGS_REFINST            =
*   ORDER_CCARD                   =
*   ORDER_TEXT                    =
*   ORDER_KEYS                    =
*   EXTENSIONIN                   =
*   PARTNERADDRESSES              =
          IF SY-SUBRC = 0.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*           EXPORTING
*             WAIT          =
*           IMPORTING
*             RETURN        =
           ENDIF.
WRITE : 'SALES ORDER IS :', SALESDOCUMENT.
This will be very helpful for you .
this one is the correct answer I have tried it and I am posting it for you.
Message was edited by: pavan inumarthy

How to find whether the created Sales Order is with BOM or without BOM ?

Hello,
I am technical guy i want to find whether the created sales order is with BOM or without bom.
Can anyone help me with table details.
Regards
VEk@

Go to TVAP & in FIELD STRUM give 'A' & PSGRP as 'SD01'.It will giveyou all the Item categories maintained in BOM.
Now you can cross - check with the Item Category maintain in the Sales Order.
Best Regards,
Ankur

How to find out the deleted sales order

hi,
sap gurus,
my core user has deleted one sales order
its showing as sales order is ARCHIVED in the status when we go for VA02
in SAP in which table the deleted sales order will be stored.
so that i can
regards,
balaji.t

Plz SEARCH in SCN before posting.
You can get those details from CDHDR, CDPOS tables.
Give OBJECTCLAS = VERKBELEG and CHNGIND = 'D' in CDPOS table.
You will the List of all Deleted Sales Orders.

How to find open item from sales order

Hi all,
my requirement is one sales order is there partial delivery is happened for some materials,take exampla matarial X has 100 quantity in sales order pratial delivery 50 is done, iwant to know the open order qunatity for a material X from sales order.
regards,
kishore.

hi kishore,
in the partial delivery scenario, the sales order items always be a open.
you can see the document flow of that document by using Tcode : VA03 then click on'update document flow' icon. then system will show the status.
i.e sales order is 'being processed'
outbound delivery is completed
billing document is completed
and accounting document in not cleared.
if it is helpful, then give me the points.
Regards,
somu.

How to create delivery for return sales order?

Hello
I'd like to create a delivery for a return sales order, I used transaction VL01N to do that, but error message said no delivery-relevant item in this order. Can transaction VL01N be used for this step?
Nicole

Hi,
We can create the delivery in Return process with the transaction code VL01N as in the normal process. The following are some imp points we need to remember before performing returns order process.
1. We must make sure that a RE document type must be created and assigned .
2. Subsequent delivery document LR must be created and assigned to order type RE.
3. We must make sure whether the item for which we are creating a return delivery is it relevant for return process.Means that in the control data of item category REN 'Return item' indicator need to be activated.
Once all these settings are fulfilled then only we can perform the return delivery successfully.
If you are using any other documents rather than standard documents please check for those configuration settings that are applicable for return process.
Regards,
Revan

How to Find Out The Production Order Number For The Sales Order Line Items

Hi All,
I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.

I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK. or in table AFPO.
Regards,
Rich HEilman

How the system determines the Requirement type for one sales order

Hi,
SAP-SD Gurus,
Please tell me how the system determines the Requirement type for one sales order?
Thanks & Regards,
Sreenivas.P

Hi,
System follows some search criterial to determine the requirement type
1. First, an attempt is made to find a requirements type using the strategy group in the material master.
2. If the strategy group has not been maintained, the system will determine it using the MRP group.
3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
Please check the path
SPRO->SALES & DISTRIBUTIONS->BASIC FUNCTIONS>AVAILABILITY CHECK AND TOR->TRANSFER OF REQUIREMENTS--->DETERMINATION OF REQUIREMENT TYPE USING TRANSACTION.
Hope it will clarify
regards,
santosh

How to check whether MRP run has been executed for a sales order or not

Dear Experts,
In Strategy:20, Make to Order scenario, I have run MRP for sales order in T Code:MD50,
then how can I check whether MRP run has been executed for a sales order or not. Is there any report where I can find some indication?
Thanks and regards,
Vikas

Dear,
In MTO scenario with Planning strategy group 20 in material master .
After sales order is created, Run MRP , then planned order will be created then go to planned order details in MD04 or MD12 you will get sales order number in assigment tab.
or check the Table PLAF field PALTR ,and field name KDAUF its sales order, for all created planned order.
Regards,
R.Brahmankar

How do know open quantity for a sales order (patially delivered)

Hi Gurus,
I have requirement to know open quantity for sales order and it was partially delivered.
Any table to know partially delivered qty of a material for a sales order.

Hi
Check This Table VBBE for open order quantity
You can find open Qty like this
Open Qty = Delivery Qty (LIPS-LFIMG) - Order Qty (VBAP-KWMENG)
Swamy

How to exclude sales office for combination sales order type/division?

Hi experts,
I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

Hi
Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
Thanks
Indranil

How I can get the Billing Type for the sales order and its items

How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?

Hi,
You need to use two tables.
First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
Then use the billing document numbers in table VBRK, where in you can get the billing document type.
Regards,

How to use of API for Cancel Sales Orders

Hi....
I want to use API for Cancel Sales Orders. Plz give me advice how we can cancel orders. I know that there is procedure provide in ORACLE APPs (i.e. OE_ORDER_PUB.process_order). But in this procedure i know the how to create and update sales order, but how to Cancel order with the use of this API.
Plz send me soultion as soon as possible. ITS VERY VERY URGENT BASE.
Thanks in Advance.

Hi all,
We are importing Sales Orders on 11.5.9 using OE_Order_PUB.Process_Order API .We have supplied most of the mandatory fields and the same data works from the front end. When we use the API it throws a Ora 20001.
A snapshot of the error message.
SQL> exec pk_process_object.process_order('1o');
Message Count is :2
Message is RA-20001: User in Package OE_Header_Util Procedure Get_Order_Number
Message is :User-Defined Exception in Package OE_Header_Util Procedure
Pre_Write_Process
Return Status is ErrorU
PL/SQL procedure successfully completed.
--------------------------------------------------------------------------------------------

How to set "Configuration Variant" for a sales order item using function

Hello All,
I use function module 'SD_SALES_DOCU_MAINTAIN' to create Customer Indep. Requirements but how to set "Configuration Variant" for a sales order item.
Is their any idea or sample code?

Hi Zhijun zhang,
<u>http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm</u>
<u>http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm</u>
A variant is simply an SAP report where the parameters for running the report have been set by the user and then saved with unique name. This allows future retrieval and execution of the report faster without reentering the parameters. As a convention the variant name should start with with the digits 50 so searchs for LHU variants is easier and quicker.
The first link will guide you by screen shot wise.
Award points if it adds information.
Thanks
Mohan

How to find territory for a sales order?

Similar Messages

Maybe you are looking for