How to find the CMYK, RGB values for an RasterItem in illustrator CS2 using Javascript??

Hi,
I want to find the color space of an raster item. I can able to get its color space using
app.activeDocument.rasterItems[0].imageColorSpace
if i found it o be CMYK color space, i need to find its value to know which color is present in the document.
Thanks in advance,
Poovili

People have asked that before & I don't actually know. It seems pretty likely it's in the SDK somewhere though. I'd try searching the API folder for phrases that might relate to this and then investigate.

Similar Messages

How to find the CMYK,RGB color value in Illustrator CS3

Hi,
I want to find the color space of an raster item. I can able to get its color space using
app.activeDocument.rasterItems[0].imageColorSpace
if i found it To be CMYK color space, i need to find its value to know which color is present in the document.
Thanks in advance,
Poovili

People have asked that before & I don't actually know. It seems pretty likely it's in the SDK somewhere though. I'd try searching the API folder for phrases that might relate to this and then investigate.

How to find the CMYK,RGB color value in Illustrator CS3 using Javascript

Hi,
I want to find the color space of an raster item. I can able to get its color space using
app.activeDocument.rasterItems[0].imageColorSpace
if i found it To be CMYK color space, i need to find its value to know which color is present in the document.
Thanks in advance,
Poovili

People have asked that before & I don't actually know. It seems pretty likely it's in the SDK somewhere though. I'd try searching the API folder for phrases that might relate to this and then investigate.

How to find the original net value for a cancelled sales order

Hi experts,
From VA03 or table VBAP, net value for those cancelled items is always zero. Where to find those cancelled items' original net value?
Thanks a lot.
Yu

Thanks Seshu,
I just tried it as per your suggestion but I found for non-cancelled items konv-kbert is not equal to the net value taken from vbap-netwr. So I wonder if knov-kbert is the right original net value for those cancelled items.
Yu

How can I select an area of a picture (larger than one pixel) and find the average RGB values of all the pixels contained inside the area?

I'm analysing the differences between several different images and I would like to select a large area of each (such as with lasso tool) and find the average RGB value of all of the pixels within the selection area made/

With the selection you could do a copy paste and use the histogram of the new layer set the histogram source to selected layer. The eye dropper sample size may also to get the average of a square area around a point.

How to find the profit center group for a profit center?

How to find the profit center group for a profit center?

Hi,
try this also
In order to pass the setid parameter of the FM, you have to concatenate the following things
Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
In my example below, I have declared as constants and concatenating to gv_setid.
gc_01016 is the set id for profit centers
gc_kokrs is the controlling area
gp_pprct is the Profit Center group entered in the selection screen.
You will get KOKRS value from the cepc-kokrs.
data :   gc_0106(4)   TYPE c VALUE '0106',
           gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
           gv_setid          LIKE sethier-setid,
           gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
CONCATENATE gc_0106 gc_kokrs gp_pprct INTO gv_setid.
CONDENSE gv_setid.
CALL FUNCTION 'G_SET_TREE_IMPORT'
    EXPORTING
      client                    = sy-mandt
      fieldname                 = 'RPRCTR'
      langu                     = sy-langu
      setid                     = gv_setid
      tabname                   = 'GLPCT'
      no_table_buffering        = 'X'
    TABLES
      set_values                = gt_set_values_1
    EXCEPTIONS
      set_not_found             = 1
      illegal_field_replacement = 2
      illegal_table_replacement = 3
      OTHERS                    = 4.
By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
Regards,
Venkatesh

How To Find Opening Stock And Value For a Material

Hi Experts,
How To Find Opening Stock And Value For a Material in Given Dates
Moderator Message: Search.
Edited by: kishan P on Sep 15, 2010 4:05 PM

Thanks For Answering.....
But I Need Any Function Module To Get Opening Stock And Value For Given Material With in Dates.

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

Warning: Could not find the customization level value for document

Hi All,
I am trying to upload the translation for one of the page at responsibility level.
I am getting following warning when running the below command.
java oracle.jrad.tools.trans.imp.XLIFFImporter $APPL_TOP/xmci/12.0.0/fr-CA/Translated/ARIACCTDETAILSPAGE.xlf -username apps -password apps -dbconnection "$AD_APPS_JDBC_URL"
Warning: Could not find the customization level value for document "/oracle/apps/ar/irec/accountDetails/webui/customizations/responsibility/51688/ARIACCTDETAILSPAGE".
The same is working fine if the translation is for some attribute at site or function level.
Did anyone faced this kind of issue.
Thanks,
Anoop

Anoop,
I am sure you would have verified the responsibility id in the target instance is 51688(may be source instance your resp id is 51688 and in target it is different).
Have a look at this below notes, it might help.
1077267.1 - Unable To Move Resp Level OA Personalization From 1 Env To Another
848851.1 - Attempting To Upload XML File Generates Error: Could not find the customization level value for document
Thanks.
With Regards,
Kali.
OSSI.

How to find the existing request no for Smart form

Hi Experts,
plz tell me how to find the existing request no for Smart form in ABAP.
thanks in advance.
regards,
radhika.

Radhika,
Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
Regards
Narasimhan

How to find the E-Mail address for my HP 6700? Printer shows E-Print connected.

I got help on the board about getting a new printer code and the Home Printer page shows that it is on, but now I don't know how to find the E-Mail address for my computer -
This question was solved.
View Solution.

Hi,
From the printer Front panel, navigate to Setup. Locate and enter Web Services. Aprove any of the steps to enable the service... allow the device several minutes to complete the registration, a page will print automatically with the printer code and the directions to select the email address from hpeprint.com.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to find the most matched values in the set of map?

Hi friends!
I have two vectors
vector<int> V1; vector<int> V2;
and a map<int, set<int>> M1;
I want to select common values from both V1 and V2 and check those values with the set in the map M1.
For example:
V1 contains;
2 4 6 8 9
V2 contains;
4 5 6 9 10
M1 contains;
1=>1 2 5 9
2=>4
3=>5 10
4=>2 4 8
5=>4 9
6=>4 6
7=>9 12
When we select the common values of V1 and V2 it is 4, 6, 9.
And we search for all 4, 6, 9 from the values of M1 which give more appropriate.
But, no all values in the set of map.
Then, we delete any value from 4, 6, 9, then remaining values would match any values from the map.
From the example, if we delete 6, then remaining 4, 9 will match with 5=>4 9, or if we delete 9, then 6=>4 6. Any one of the keys can be selected.
I know how to select the common values from V1 and V2, but I do not know how to match with the values and select the appropriate key from M1.
Could anyone help me to solve this?

This is not the question you asked, except perhaps in the subject. The subject is not the right place to put key features of the question. It is also important to use the body to ask just the question you want
answered. For example your real question has nothing to do with V1 and V2, just the common vector V (e.g. 4 6 9).
One way to solve your problem would be to create a new map
map<int, set<int>> M2;
with the same keys as M1. Each set of M2 should contain the elements of V that are
not in the corresponding set of M1.
Then pick the key of M2 that has the smallest set. If that set is empty, then the whole of V can be used. Otherwise the smallest set tells which elements of V have to be removed, and which is the desired key of M1.
In your example, key 5 of M2 will contain just 6, so you should remove 6 from V and select key 5.
Yes fine. I tried the following code and it creates the map M2 (NewMyMap in my code). But how to find the smallest set starting from size 1?
#include <vector>
#include <algorithm>
#include <iostream>
#include <map>
#include <set>
using namespace std;
typedef vector<int> IntVec;
typedef set<int> IntSet;
typedef map<int, IntSet> SetMap;
bool IsValueNotInSet(int value, IntSet& S);
SetMap CreatNewSetMap();
IntVec IVec; //This vector is for selecting certain keys from mySet map.
IntVec myVec;
SetMap mySet;
SetMap NewMyMap;
int main()
IVec.push_back(3); IVec.push_back(4); IVec.push_back(5); IVec.push_back(6);
myVec.push_back(4); myVec.push_back(6); myVec.push_back(9);
IntSet tempS;
tempS.insert(1); tempS.insert(2); tempS.insert(5); tempS.insert(9);
mySet.insert(make_pair(1,tempS));
tempS.clear();
tempS.insert(4);
mySet.insert(make_pair(2,tempS));
tempS.clear();
tempS.insert(5); tempS.insert(10);
mySet.insert(make_pair(3,tempS));
tempS.clear();
tempS.insert(2); tempS.insert(4); tempS.insert(8);
mySet.insert(make_pair(4,tempS));
tempS.clear();
tempS.insert(4); tempS.insert(9);
mySet.insert(make_pair(5,tempS));
tempS.clear();
tempS.insert(4); tempS.insert(6);
mySet.insert(make_pair(6,tempS));
tempS.clear();
tempS.insert(9); tempS.insert(12);
mySet.insert(make_pair(7,tempS));
cout<<"MYVEC\n";
cout<<"-------------\n";
for(IntVec::iterator itv = myVec.begin(); itv != myVec.end(); ++itv)
cout<<(*itv)<<" ";
cout<<"\n\n";
cout<<"\nMYSET\n";
cout<<"-------------";
for(map<int,set<int>>::iterator its = mySet.begin(); its != mySet.end(); ++its)
cout << endl << its->first <<" =>";
for(IntSet::iterator sit=its->second.begin();sit!=its->second.end();++sit)
cout<<" "<<(*sit);
cout<<"\n\n";
NewMyMap= CreatNewSetMap();
cout<<"\nNEWMYSET\n";
cout<<"-------------";
for(map<int,set<int>>::iterator its1 = NewMyMap.begin(); its1 != NewMyMap.end(); ++its1)
cout << endl << its1->first <<" =>";
for(IntSet::iterator sit=its1->second.begin();sit!=its1->second.end();++sit)
cout<<" "<<(*sit);
cout<<"\n\n";
return 0;
bool IsValueNotInSet(int value, IntSet& S)
IntSet::iterator it=find (S.begin(), S.end(), value);
if (it!=S.end())
return false;
return true;
SetMap CreatNewSetMap()
IntSet TSet;
for(IntVec::iterator it = IVec.begin(); it != IVec.end(); ++it)
SetMap::iterator its = mySet.find(*it);
if (its != mySet.end())
TSet.clear();
int key = its->first;
IntSet& itset = its->second;
for(IntVec::iterator itv = myVec.begin(); itv != myVec.end(); ++itv)
if(IsValueNotInSet((*itv), itset))
TSet.insert(*itv);
NewMyMap.insert(make_pair(key,TSet));
return NewMyMap;

How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx 

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

How to find the CMYK, RGB values for an RasterItem in illustrator CS2 using Javascript??

Similar Messages

Maybe you are looking for