How to find the frequency of execution of ZTransactions

Dear Friends,
Please suggest a way to find out that how many of my ZTransactions have been not at all executed / executed once or twice and so on..in the past six months or year.
Regards,
Alok.

Hi,
You can check the Transactions log history through SLG1 T.code.
Also check t.code SUIM.
Hope this helps.
Regards
Vinayak

Similar Messages

How to find the frequency of a squarewave?

Hi!
I want to find the frequency of a squarewave applied to a analog channel on a DAQmx 6225 card. I have four squarewave signals and two are connected to the two counter inputs available. the other two are my problem. Is there a simple way to extract the frequencies from these two signals? I have tried using the Pulse Measurements VI but it is working unsatisfactory. The frequncies I want to measure is from 20 to 2000 Hz.
Can anyone help me in this matter?
I use LV 7.1 and DAQmx 7.4

Hello!
Just like Dennis mentioned in his reply:
You have created several tasks for various analog input operations and these occur at the same time but since a task reserves the analog input circuitry on the board that means that another task cannot reserve it until the first task are done executing. That is what causes the errors you are experiencing.
Just combine the various analog input operations into one single task instead and you are pretty much set. If you need different sampling rates on the analog input operations I refer to the following link:
http://digital.ni.com/public.nsf/allkb/96FD2F4685065C7686256F25006EE8DE
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

How to find the number of executions of a sql oracle 10g

Is there any script handy which is useful to get the number of executions of a sql in particualr time in a rac environment.

A lot depends on what time period you're trying to count the executions over...
In V$SQL, there is a column EXECUTIONS that will count the number of executions since the SQL statement was loaded into the shared pool, which may be too long a period or too short a period for your question.
If you are trying to get historical information and you have licensed the performance & tuning pack so that you can get the AWR, you could query the DBA_HIST_SQLSTAT table over an appropriate set of SNAP_ID's to get the totals for an arbitrary period of time.
Justin

How do I find the frequency of numbers in a group of data strings?

I have a set of data strings and I want to find the frequency of each number occuring in a data string. How do I do this?
Here are the strings.
28-29-43-51-53 7
02-08-30-36-48 31
09-10-27-36-42 11
20-24-31-33-36 44
16-29-48-52-54 5
06-15-29-39-51 36
01-16-18-25-27 3
09-30-39-42-47 37

The first part is to "break out" the values from your strings. Columns B thru G take care of this:
I assumed allvalues as 2 digits...
B2=VALUE(MID($A2, 3*(COLUMN()-2)+1, 2))
select B2 and fill to the right until column G
then select B2 thru G2 and fill down as needed.
For compactness of THIS presentation I added two additional columns for getting the Frequency... columns I and J.
Column I contains an counting value and J contains the frquency of the corresponding value in I (of the same row).
put a "1" in I2, a "2" in I3, then select both I1and I2, then grab (click and hold the little circle at the bottom right of the selection), and drag down until the value is the max number you expect (I assumed it was 99).
J2=COUNTIF(B:G, "="&I2)
select J2 and fill down

How do I find the frequency of "hum" in a recording?

Hello,
I have some audio from a camcorder that is marred by a hum from the built-in microphone. It's not 60Hz since removing that made no difference. My question is - what tool would I use in Audition 3.01 to find the frequency (range) of a sound, a hum in this case, so that I can use say a notch filter to remove/minimize it? I tried using the spectral view but that didn't help. Maybe I'm missing the obvious, in which case please be kind to one less learned such as myself:) Any help would be greatly appreciated- thanks everyone!

>Normally hum is caused by a poorly shielded (or unshielded) microphone cable running near a transformer (external brick power supply).
a) There's no such thing as 'normal' where hum is concerned - I could easily give you many possibilities - the scenario you suggest isn't even particularly prevalent.
b) This isn't hum we are talking about here, but harmonic hash, and on top of that, it's in a camcorder. The cause? Quite frankly, all bets are off. As for your explanation of clipping causing the harmonic series - well, I don't know what planet you are living on, but in my
considerable experience of this phenomenon as an ex-mixer designer, I can tell you that this really has very little, if anything at all, to do with it.
If you actually want to know, most hum harmonics generation has more to do with earthing mismatches allowing induced leakage current from power supplies into signal-carrying tracks. In the case of conventional camcorders, it's different though - here you have several sources of interference involved in generating the relatively high levels of signal at the field repetition rate adjacent to the relatively sensitive mic input stages, and with the best will in the world, any linear-based signal recording is going to have a poor S/N ratio, and the noise floor is likely to have a lot of harmonics of 60Hz - because that's pretty much what gets generated within the casing at the highest levels, and it's pervasive. Clipping doesn't even get a look-in in this situation.

How can I find the frequency of a signal from a turbine flowmeter?

My turbine flow meters output a voltage signal frequency. Is there are way that I can find the frequency in LabVIEW? Right now I have the flow meters wired to my card as analog inputs. Maybe I need to wire them in differently.

Dear moebeth,
To address your question, can you include more information about the flow meters? As far as I know, turbine flow meters can have outputs of analog voltage, analog current, frequency/pulse, or switch.
If the meters are outputting a voltage, then connect it as an analog voltage input and use the analog voltage virtual channel.
If the meters are outputting a frequency or pulse, connect it as a counter input. With the counter input, you would need to program in LabVIEW without using a virtual channel. Instead, you would use the counter VIs. There are shipping examples included with LabVIEW. Measure Frequency (DAQ-STC).vi can be used just by pressing Run if you wire the signal into the source of whichever counter you want to use and th
e ground into DGND.
Let me know if you have any further questions or if this does not resolve your issue.
Thanks again and have a great day!
Chad AE
Applications Engineer - National Instruments
Attachments:
Frequency.zip ‏45 KB

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
     O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
    /↑\ Fks
   O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
   ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
               child.constraint_name fk,
               child.table_name child,
               child.r_constraint_name pk,
               father.table_name father
          from all_constraints father, all_constraints child
         where child.r_owner = father.owner
           and child.r_constraint_name = father.constraint_name
           and father.constraint_type in ('P', 'U')
           and child.constraint_type = 'R'
           and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
   and child.table_name = aux.child
   and father.constraint_name = aux.pk
   and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, <font color=red>IN RED</font>):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
    identified by philips';
select granted_role bulk collect
    into cRoles
    from user_role_privs
   where username = user;
for i in cRoles.first .. cRoles.count loop
    execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
                           constraint root1_id_pk primary key(root1_id)
                           enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
   before delete or insert or update on philips.root1
   begin
     null;
   end;
create table philips.root2(root2_id number,
                           constraint root2_id_pk primary key(root2_id)
                           enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
   before delete or insert or update on philips.root2
   begin
     null;
   end;
create table philips.node1(node1_id number,
                           root1_id number,
                           node2_id number,
                           node4_id number,
                           constraint node1_id_pk primary key(node1_id)
                           enable,
                           constraint n1_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n1_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable,
                           constraint n1_n4_id_fk foreign key(node4_id)
                           references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
   before delete or insert or update on philips.node1
   begin
     null;
   end;
create table philips.node2(node2_id number,
                           root1_id number,
                           node3_id number,
                           constraint node2_id_pk primary key(node2_id)
                           enable,
                           constraint n2_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n2_n3_id_fk foreign key(node3_id)
                           references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
   before delete or insert or update on philips.node2
   begin
     null;
   end;
create table philips.node3(node3_id number,
                           root2_id number,
                           constraint node3_id_pk primary key(node3_id)
                           enable,
                           constraint n3_r2_id_fk foreign key(root2_id)
                           references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
   before delete or insert or update on philips.node3
   begin
     null;
   end;
create table philips.node4(node4_id number,
                           node2_id number,
                           constraint node4_id_pk primary key(node4_id)
                           enable,
                           constraint n4_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
   before delete or insert or update on philips.node4
   begin
     null;
   end;
-- out of the relational model
create table philips.node5(node5_id number,
                           constraint node5_id_pk primary key(node5_id)
                           enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
   before delete or insert or update on philips.node5
   begin
     null;
   end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
    aExportTablesPhilips     utl_file.file_type := null; -- file to write DDL of tables
    aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
    aExportIndexesPhilips    utl_file.file_type := null; -- file to write DDL of indexes
    aExportGrantsPhilips     utl_file.file_type := null; -- file to write DDL of grants
    aExportTriggersPhilips   utl_file.file_type := null; -- file to write DDL of triggers
    sDirectory               varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
    cTables                  udt_tables; -- collection to store table names for the relational depth
begin
    -- omits all referential constraints:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
    -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
    -- append a SQL terminator (; or /) to each DDL statement:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
    -- create/open files for export DDL:
    aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
    aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
    aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
    aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
    aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
    select d.table_name bulk collect
      into cTables -- collection with the names of tables in the schema philips
      from all_tables t, philips.dictionary d
     where owner = 'PHILIPS'
       and t.table_name = d.table_name;
    -- execution
    sp_seeks_ddl(aExportTablesPhilips,
                 aExportReferencesPhilips,
                 aExportIndexesPhilips,
                 aExportGrantsPhilips,
                 aExportTriggersPhilips,
                 cTables);
    -- closes all files
    utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips     in utl_file.file_type,
                         aExportReferencesPhilips in utl_file.file_type,
                         aExportIndexesPhilips    in utl_file.file_type,
                         aExportGrantsPhilips     in utl_file.file_type,
                         aExportTriggersPhilips   in utl_file.file_type,
                         cTables                  in out nocopy udt_tables) is
    cDDL       clob := null; -- colletion to save DDL
    plIndex    pls_integer := null;
    sTableName varchar(30) := null;
begin
    for i in cTables.first .. cTables.count loop
      plIndex    := i;
      sTableName := cTables(plIndex);
       * Retrieves the DDL and the dependent DDL into cDDL clob       *
      * for the selected table in the collection, and writes to file.*
      begin
        cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTablesPHILIPS, cDDL);
      exception
        when dbms_metadata.object_not_found then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportReferencesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportIndexesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportGrantsPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTriggersPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
    end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
                          cDDL    in out nocopy clob) is
    pLengthDDL pls_integer := length(cDDL);
    plQuotient pls_integer := null;
    plRemainder pls_integer := null;
begin
      * Register variables to control the amount of lines needed   *
     * for each DDL and the remaining characters to the last row. *
    select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
      into plQuotient, plRemainder
      from dual;
      * Join DDL in the export file.                            *
     * ps. 32766 characters + 1 character for each line break. *
    -- if the size of the DDL is greater than or equal to limit the line ...
    if plQuotient >= 1 then
      -- loops for substring (lines of 32766 characters + 1 break character):
      for i in 1 .. plQuotient loop
        utl_file.put_line(aExport, substr(cDDL, 1, 32766));
        -- removes the last line, of clob, recorded in the buffer:
        cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
      end loop;
    end if;
      * If any remains or the number of characters is less than the threshold (quotient = 0), *
     * no need to substring.                                                                 *
    if plRemainder > 0 then
      utl_file.put_line(aExport, cDDL);
    end if;
    -- record DDL buffered in the export file:
    utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;<font color="red">The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?</font>

How to calculate the frequency of the search string in a row

Hi,
I would like to find the frequency of the number of the occurences of a search string in a row which is of type of xmltype content.
For ex: I would like to find the frequency of the word "oracle" in a row which is of type xmltype content.
Is there any fuction called frequency or freq...
Thanks in advance....

Oh!
Then How to calculate the frequency of occurences in a row ?
I hope the Score formula is S=3f(1+log(N/n))
I want to calculate the f value alone, how is it possible.
Thanks in advance.....

Sir,how to find the last DML operations

Hi,
Please tell me how to find the last DML Operations at least minimum 30 queries.
Thanks in advance,

Shared Pool is a memory location in SGA that contains SQL Statement that are submitted to Oracle for execution. This area is common to the entire database. Its not specific to user.
So what ever Unique SQL statement that is submitted to the SQL Engine will be available here. Shared Pool has a size limit. That is defined by the parameters SHARED_POOL_SIZE and SHARED_POOL_RESERVED_SIZE. So when the Shared pool becomes full the data needs to be removed from it. That is done in FIFO basis.
Oracle provides a visibility to this area through dictionary view V$SQLAREA. So this view will not only contain the SQL executed by you but also by every one. Even the one executed by oracle itself.
So in my opinion what you are asking is not possible to get. You must have some logging mechanism in your application to get this information.

How to find the current state in web dynpro

Hi,
Can any one tell me how to find the current state of system (idle /not idle).
Thanks,
Krishna..

Please explain further. I don't understand how you are expecting to test for idle. If ABAP code is being executed, then you know that the application is not idle. Only a server event could trigger code execution. Only a timedTrigger would be able to tell you that a certain amount of time has passed without activitity - although the event of the timer itself will be a server event that constitutes activity.

How to find the customer exits for a particular transaction

hi
how to find the customer exits for a particular transaction

Hi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens

How to find the parent package

Hi,
The problem I'm trying to solve is, given an instance of a SSIS package being executed, I need to find the GUID and execution id of the package that calls it. According to the API (https://msdn.microsoft.com/en-us/library/microsoft.sqlserver.dts.runtime.package.aspx)
the Package class
has a property "Parent", which returns the instance of the container that contains the child package. In reality though, this doesn't seem to work. Here's what I did,
1. Create a child package that simply has a script task which writes a line to a file for debugging purpose.
2. Create a custom SSIS component in which the child package is called by the myPackage.Execute() method;
3. Given the reference myPackage, try to print the parent container id through the FireInfo() method from IDTSComponents interface.
What I got was an "reference not set to an object" error, which means the parent property is null. This leads me to wonder, when is the parent property set? Is it only set during the execution of the child package? I tried to access it both before
and after executing the child package, and in both cases the value was null.
My ultimate goal is to write the parent package id (and execution id) into the ssis log so as to easily trace the execution of packages. Another option to achieving this goal would be through passing values via parent package variables but that seems to
be too clumsy.
Any help / suggestion is greatly appreciated.
Regards,
Amos

I have done the same thing via different way. Let me tell you how
Step 1: Create a log table
CREATE TABLE [dbo].[ExecutionLog](
[LogID] [int] IDENTITY(1,1) NOT NULL,
[ParentLogID] [int] NULL,
[Description] [varchar](50) NULL,
[PackageName] [varchar](50) NOT NULL,
[PackageGuid] [uniqueidentifier] NOT NULL,
[MachineName] [varchar](50) NOT NULL,
[ExecutionGuid] [uniqueidentifier] NOT NULL,
[Operator] [varchar](50) NOT NULL,
[StartTime] [datetime] NOT NULL,
[EndTime] [datetime] NULL,
[Status] [tinyint] NOT NULL,
[FailureTask] [varchar](64) NULL,
CONSTRAINT [PK_ExecutionLog] PRIMARY KEY CLUSTERED
[LogID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[ExecutionLog] WITH CHECK ADD CONSTRAINT [FK_ExecutionLog_ExecutionLog] FOREIGN KEY([ParentLogID])
REFERENCES [dbo].[ExecutionLog] ([LogID])
GO
ALTER TABLE [dbo].[ExecutionLog] CHECK CONSTRAINT [FK_ExecutionLog_ExecutionLog]
GO
Step 2: On every package Create three Execute SQL Task
Execute SQL Task 1 : On begin of package
Execute SQL Task 2 : After completion of all task
Step 3: Now create two SP
For EQT #1
--Root-level nodes should have a null parent
if @ParentLogID <= 0 set @ParentLogID = null
--Insert the log record
insert into dbo.ExecutionLog(
ParentLogID
,Description
,PackageName
,PackageGuid
,MachineName
,ExecutionGuid
,Operator
,StartTime
,EndTime
,Status
,FailureTask
) values (
@ParentLogID
,@Description
,@PackageName
,@PackageGuid
,@MachineName
,@ExecutionGuid
,@operator
,getdate()
,null
,0 --InProcess
,null
set @logID = scope_identity()
EQT #2 On End
update dbo.ExecutionLog set
EndTime = getdate() -
,Status = case
when Status = 0 then 1 --Complete
else Status
end --case
where
LogID = @logID
You can create similar SP for OnError if you want
Step 4: Now create two variables LogId & parentLogId Int default value 0
Step 5: Step up parent package variable configuration for logId like below
Step 6: Call these SP in respective execute SQL task
Hope this will help
Glad to help! Please remember to accept the answer if you found it helpful. It will be useful for future readers having same issue.
My Profile on Microsoft ASP.NET forum

How to find out if SQL execution plan is changed proactively using job/grid

Hello,
Can you help me on How to find out if SQL execution plan is changed proactively using job/grid control?
Thank you..
-

The answers so far are supposed to show ways how to see that a plan changed after the fact - that is not really proactive but that was the question.
A way to see a plan change proactively would be to create a SQL Plan Baseline for the SQL statement with the 'good old' plan and then watch DBA_SQL_PLAN_BASELINES for new rows with that SQL_HANDLE which would indicate that a new execution plan was computed - although not yet used.
Kind regards
Uwe Hesse
"Don't believe it, test it!"
http://uhesse.com

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to find the frequency of execution of ZTransactions

Similar Messages

Maybe you are looking for