How to find the no of pages in my report.

hi.
i have one requirement.
What i need is i create one section at page footer.
i want to suppers this section if total no of pages is more than 1 ..
i think page no starts with 0 am i correct.
Simply
page1
page2
in this case.. i need to enable the section
only page1
i need to disable the section.
if page1 more than 1 then
in this case.. i need to enable the section

here My problem is
Sorry now i identified.
i put one detail section.
under detail section.
i put report section
report section is having one rectangle box.
how many records are there in detail section nobody does not knows.
may be page will end 1 or 2 or 3..
some times..
Scenario1:
details section will be start page1 footer and it will end page2 header ...
immediately Report section will come so, Reprot section will make one horizontal line
i need line at page no 1 only not page no 2
Scenario 2:
Some times all the report will end at page no 1 only in this case no end of line
bcz reoort section will cover one vertical line.
plz have a look on below attached file.
simply if detail section comes at page footer i need one horizontal line
i put one pagefooter section and i want to supress it
but this is not correct i think
any suggestions.

Similar Messages

How to find the .htm resource pages for search profiles?

Good Day All,
I am trying to customize the search page (search profiles) within UCM, i want to do that by use the appropriate .htm resource page within a custom component.
I found the checkin .htm pages and i can make changes on them and the changes are reflected on the UCM.
anyone can help me and providing me with pages name, or tell me how to thier names.
Regards.

Thanks so much for your reply.
I have the following case:
assume that i have a field on ucm named "xDepartment", and its type on ucm is Int (integer) . This filed is configured to Table-View option list, and the view have two columns (key, value). also assume that i have the following data in this view:
1: CIS
2: MIS
3: BIS
4: Enginering
5: Accounting
on search profiles, when i select a profile that have this field, the possible values that can be searched are integer and will appear From - To ; since this field is defined as integer. But the user that will search don't know the mapped value for each key, because on checkin form the values appears on the secreen.
what i want to ask is:
can we specifiy the possible search values to be the values not keys of this view. can the search values appears like what values appearch in checkin page
note:
i have an illustration image, but i don't know how to add it here on forums
Regards

How to find the number of pages of a certain size

I have to do a good deal of printing at work, and often the number of pages have to be logged . Some files have various sizes in them, which are printed at either 8.5x11 or 11x17. I was wondering if there is a feature, or third party program that would allow me to view the number of pages for each page size, so as not to have to count by hand. Thank you.

if its just genearl tools you want (as opposed to programming your own), you could use the free trials on netmechanic.com and linkpopularity.com

How to get the no of pages in a report?

Hi All,
I have a requirement to get the number of pages in the crystal report.
I found that the following method of IReportSource gives the value.
public int getLastPageNumber(com.crystaldecisions.sdk.occa.report.application.IRequestContext requestContext)
throws java.lang.NullPointerException,
ReportSDKException
But the issue issue is with the paramter requestContext. How can I get this requestContext.
Appreciate your time.
Regards,
Anil Chowdary K

Because of the page on demand feature, by default there is no clean way to get the page number, because each page is generated as requested. To get the total page count, the viewer must render the entire report first. The easiest way to accomplish this is to use the CrystalReportViewer object and call the showLastPage() method, then using the CrystalReportViewer object generate a ViewInfo object, and call the getPageNumber() method.
For more information review the Viewer documentation in our [SDK Library|http://www.sdn.sap.com/irj/sdn/bi-sdklibrary].

How to find the definition for variable creation in report painter

Hi expert,
How/where I can find information about the variable created in basis key figure in the report painter?
What is the mean for basis key figure and variable (set variable on/off check ) in the basis key figure?
Please advice.
thank you.
Regards,
Karen

Hi chinks ,
Thank you for the prompt reply.
My question is how to display the plan data for fiscal year 2012 with the version 6 without explicit/hard code to input version 6 when user just only key in the fiscal year 2011?Any method or variable can be done in report painter which do not appear in the input screen?And How ?
I have try include the variable for version in the column but it appear in the selection input screen where i do not want the version to be appear in the selection input screen where everytime need to remember which version.
I also have try to include the version in the column without variable and I need to key in the value version 6 which this is hard coded where I can't analyst for plan data for budget 2011 where it required me every time need to change the value in report painter for version 5 in order to be able to view the plan data for budget 2012.
Please help.
Many thanks.
KH

How to find the version appl server?

How to find the version of IAS, forms and reports?
we are running HRMS on HP unix server.
Thanks

Hi,
You can get your application server version in the context file with the value of the context variable s_techstack.
You can also do it with the following steps,
On Windows NT/2000 platform :
Navigate to :
C:\Program Files\Oracle\Inventory\Components
\oracle.iappserver.iapptop directory.
On UNIX platform:
Navigate to :
$ORACLE_HOME/oraInventory/Components/oracle.iappserver.iapptop directory
In both cases the sub directory under the oracle.iasppserver.iapptop directory will show the version of Application Server installed. For example thesubdirectory may be called 1.0.2.2.1, which indicates version 1.0.2.2.1.
Rgds,
S.Jai
Shanthi Gears (LTD)

How to find the total no of pages in script

hi
how to find the total no of pages in script

Hi
·     &SAPSCRIPT-FORMPAGES&:
This field contains a number representing the total number of pages of the currently formatted form (any output between START_FORM and END_FORM). The page counter mode (START, INC, HOLD) of the individual pages is ignored. You can use this symbol to formulate information like
Page x of y for your output.
·     &SAPSCRIPT-JOBPAGES&:
This field contains a number representing the total number of pages of all forms contained in the currently formatted print request, in other words, of all forms created using the OPEN_FORM, START_FORM.. ENDFORM, START_FORM.. END_FORM,..., CLOSE_FORM function modules.
When using the SAPSCRIPT-FORMPAGES or SAPSCRIPT-JOBPAGES symbols, SAPscript leads all output pages of the current form or current print request into main memory to replace the symbol by the appropriate value. For large output jobs, this can mean a very large amount of memory.
·     &PAGE&, &NEXTPAGE&
This symbols are initially converted using the options specified in the form of the page definition.
Reward all helpfull answers
Regards
Pavan

TS1702 how to find the serial number, after purchase Pages online?

how to find the serial number, after purchase Pages online?

If you downloaded the standalone trial version of Lightroom, it will be necessary for you to uninstall that version. Then you will be able to install Lightroom through the creative cloud application manager. After you install Lightroom that way, just double-click on the catalog that you have already started.

How to find the xml elements in Indesign pages

i imported the xml file in vb.net. now i want to find the number of pages and no. of elements. i found out it. but i was not able to find which elements are placed in which page. i want that information. plz kindly help. i am using vb.net. for eg. <ce:figure> placed in which page no., <ce:sections> placed in which page no., etc..,

I imported the xml file in vb.net. now i want to find the number of pages and no. of elements. i found out it. but i was not able to find which elements are placed in which page. i want that information. plz kindly help. i am using vb.net. for eg. <ce:figure> placed in which page no., <ce:sections> placed in which page no., etc..,

I am using Aurora, but I can't find out how to ask a question for it and not firefox. My real question is how to reach the about: config page in Aurora.

For some reason, Mozilla Support has no section for me to ask a question about Mozilla Aurora. I need to know how to reach the about: config page in Aurora and no one has apparently asked this question before. Someone please help me on this issue because no one seems to know

Note that your System Details List shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
*http://kb.mozillazine.org/Preferences_not_saved

How to find the version of oem

How to find the version of the installed oem?
I have /home/oracle/10.1.0/oem
But I wanted to know the the last digit as well
thanks

BTW - For both DB Control and Grid Control, you can also use also find the version using the url (assuming your EM is already working)
http://servername:port/em/console/aboutApplication
From the displayed page, you can also click on the License url to go to the Oracle Enterprise Manager 10g License Information.

How to Find the XML Tag in indesign

HI!! We are working with XML work flow in indesign. In indesign how could we find the XML Tag in indesign. Example:: In the Below list we could have to find the xml tag <chapter> in story editor or in the main text frame in indesign using find option. Kindely sent if any Plugins is available. For exmaple: ************ <book> <part> <chapter> <head> <para> <bold> Thanks, C.K.Venkatesan

I imported the xml file in vb.net. now i want to find the number of pages and no. of elements. i found out it. but i was not able to find which elements are placed in which page. i want that information. plz kindly help. i am using vb.net. for eg. <ce:figure> placed in which page no., <ce:sections> placed in which page no., etc..,

How to find the 1(one week) performance of the system

HI every one
in my recent interview he has asked this question
i have checked the sar options through man pages but i couldnt understand ...
can any one please tell me how to find the on week performance report of a system......
please tell me how i can find the performnace reports
Thanks in Advance

Hi.
crontab -l sys
Show, activated or not collecting of performance statistics.
man sa1
The shell script sa1, a variant of sadc, is used to collect
and store data in the binary file /var/adm/sa/sadd, where dd
is the current day.
So you need found file with correct date in /var/adm/sa
Regards.

How to find the size of an arrayList through Expression Builder.

Hai OTN,
How to find the size of an arrayList through Expression. I have a managed bean in View Scope.I am using Jdeveloper 11.1.1.2 with ADF Faces components.
Managed Bean :
ArrayList<IllnessEmployeesObj> employeeGridList =
new ArrayList<IllnessEmployeesObj>();
JSPX :
Value="#{viewScope.PandIVH.employeeGridList.size}"
Error : java.lang.NumberFormatException: For input string: "size"

Hi Dinil,
I have provided you with a sample that would show you the how you can get the size of an arraylist
the sample has a page untitled1 and a bean named test.
I have run in on jdev 11.1.2 and it is ok, it will be ok on 11.1.3
after running the sample you will see the 2.
please remember that you must add the JSTL taglib on the viewcontroller.
just right click on viewcontroller, go to tag lib select the jstl.
page
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsp/jstl/functions" prefix="fn"%>
<f:view>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
<title>untitled1</title>
</head>
<body>
<h:form>
<h:outputText value="#{fn:length(test.a)}"/>
</h:form>
</body>
</html>
</f:view>
bean
import java.util.ArrayList;
public class Test {
public Test() {
a= new ArrayList();
Object o=new Object();
a.add(o);
a.add(o);
ArrayList a;
public void setA(ArrayList a) {
this.a = a;
public ArrayList getA() {
return a;
I hope this sample came handy.
regards,

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

How to find the no of pages in my report.

Similar Messages

Maybe you are looking for