How to find the role of a OBI user

Hi All,
I am using the OBI Web Services to access OBI. I have the user name with me i wanted to know whether the user is a Administrator or a Developer. Is there any way to find the role (Administrator / Developer).
Depending on his role (Administrator / Developer) i have to provide different functionality.
Example:
UserName : IE_ABC
Thanks in Advance!!!!!!!

is it helpful?
using narrative & get user role

Similar Messages

How to find the plant assigned to a user profile

Hi All,
i am new to SRM but supporting it. so pls help.
how to find the plant assigned to a user profile?
i need to assign a address code to a company code-plant-building code so that the shipping address should come as a default in the shopping cart.
i found many plants in the PPOMA_BBP transaction but could not understand which plant i should take for the abhove assignment.
Thanks in advance.
Regards,
Anubhab

Hi,
There is one check box in transaction for default value for every attribute. And a particular attribute there has to be a default value.
Use FM BBP_GET_ATTRIBUTES_AT03 to fetch all attributes for a particular shopper. Then check for the particular attribute witha default value.
In this way you will get default plant for that shopper can further requirement can be completed.
Regards,
Brajvir

How to find the "role" in forms 6i

I need to find what roles does a user has from forms (roles such as "admin, reguser...etc...roles that i created"
For example, i can find the following but i don't how to get the "roles"
DECLARE
UN VARCHAR2(80);
PW VARCHAR2(80);
CN VARCHAR2(80);
BEGIN
:global.UN := GET_APPLICATION_PROPERTY(USERNAME);
:global.PW := GET_APPLICATION_PROPERTY(PASSWORD);
:global.CN := GET_APPLICATION_PROPERTY(CONNECT_STRING);
End;
Thank you in advance.

Hello,
I made it in the following way:
I have several roles that are granted to the user but
are not default_roles. That means they must be enabled
with the application.
declare
cursor c1 is select
GRANTED_ROLE from user_role_privs
where default_role = 'NO';
rolen_name varchar2(30);
rolen_alle varchar2(2000);
i number := 0;
BEGIN
open c1;
loop
     fetch c1 into rolen_name;
     exit when c1%NOTFOUND;
     i := i+1;
     if i = 1 then
     rolen_alle := rolen_alle || rolen_name;
     else
     rolen_alle := rolen_alle || ',' || rolen_name;
     end if;
end loop;
close c1;
if i >= 1 then
DBMS_SESSION.SET_ROLE(rolen_alle);
end if;
END;

How to find the role name for the trasaction

Dear Gurus,
Kindly assist me to find the role name to which a perticular transaction was assigned.
For example:- I need to find the role name for SU01, SUIM, SE38...etc
Thanks&Regards,
Kalyan.

Hi Kalyan,
Use SUIM T-code to analyse User Vs Roles and Roles Vs T-Codes. Then your problem will be solved.
Regards,
Hari.
PS: Points are welcome.

How to find the Role contains any Tcode

Dear Sir/Madam,
With SUIM I found users list having a tcode sm30. But when I tried to find out the exact Role containing that Tcode with SUIM , it is not showing any role. I have to remove this Tcode from these Users. How it can be done?
Please advice.
Thanks and Regards,
Pranab

> But when I tried to find out the exact Role containing that Tcode with SUIM , it is not showing any role.
The suim report roles "by transaction assignment" is notoriously unreliable because it only looks in the role menus. Better use the report for roles "by authorization values", fill in "S_TCODE" as object 1, hit the enter key and give SM30 as value. Now you should get a list of roles containing SM30, even if it isn't in the role menu.
I think that's less tedious than Bala's suggestion and just as accurate.
For more detailed explanations browse or search the SDN forum.
Jurjen
One other thought: Are there any profiles assigned directly to the users? That would also explain the behaviour you described.
Edited by: Jurjen Heeck on Dec 30, 2009 4:30 PM

How to find the role modification done for what objects

dear all
role modificaton done for some objects, when execute the suim for change document for roles with option "authorization data",out put is not showing old value and new value.we are using ECC 5.0,report is showing only objects modified.how to know the old values and new values?

Dear thanks for nice reply,
how to read this format
take for example for object F_BKPF_BLA which is old value and new value
F_BKPF_BLA *** Authorization created ***
                                       Activity
                                        03, 77
                               Authorization Group
                                        SA
F_BKPF_BLA     *** Authorization created ***
                                       Activity
                                           77
                                 Authorization Group
                                           SA
F_BKPF_BLA                    Activity
                                           03
report is showing values above mentioned.

How to find the transactions used by a user

Hi experts,
How can I find which transactions used by a user. In which SAP table could I look after?

Hi ,
You can use transaction code ST03N.
1. Go to tx code - ST03N
2. Under "Workload" you can select your "Instance or Total" so that it expands and shows you Days, Week, Month.
3. If you want to look at the transactions executed for a particular day, lets say, then double click on any day.
4. At the bottom left you get "Analysis Views"
5. Select & expand "User and Settlement Statistics"
6. Double click on "User Profile"
7. On the right side of the window you get a list of all the users
8. Double click on a particular user you want to view the details of.
9. The new screen will display the "Transactions/Reports Utilized by User XXX"
If you wanna track which users executed a particular transacation then follow this:
10. In "Analysis Views" expand "Transaction Profile"
11. Double click on "Standard"
You can view the list of Transactions and Reports.
12. Double click on the Tx Code or Report you wanna check and it will show the Use of it.
This will help you.
Reward if helpful.
Thankyou,
Regards.

How to find the mails triggered by which user from SOST or other transac.

Hi Experts,
How to find out mails triggered from SAP system by which user from SOST or some other means of mail triggering from SAP.
Regards,
IFF

Hi Buddy,
Make the question clear. You can check in SCOT transaction.
Cheers,
Sanil

How to find the Data Entered Date and User Name?

Dear Team,
An End User feeds a data wrongly in KP26. I would like to find by whom it was entered and when? i.e, user name and Date of particular entry.
Regards
R.Thillai govindrajan

Hi Thillai,
I don't think you can find that information now. If you have switched on trace on that user before he changes, you would have got those details in trace file.
Thanks,
Siva Kumar

How to assign the role for created user thru dynpro App

Hi All
How to assign the role for currently created user from Webdynpro App.
when i enter into the portal after creating the user
i am getting the following messgae in the portal
"No portal roles are assigned for this user.If this problem persists, contact your system administrator."
how to assign the user defined role for the created user from dynpro App
Regards
Dhina Kar J
Edited by: Dhinakaran Jeyachandran on Feb 1, 2008 12:19 PM
Edited by: Dhinakaran Jeyachandran on Feb 1, 2008 12:35 PM

In the User Administration section of your portal find your newly created user and below select "Assigned Roles" tab then press <Modify> button and look through available roles on portal then just simply add and save. But if you want to do it programmatically see below:
IUserAcountFactory userFactory = UMFactory.getUserAccountFactory();
// IUser - read only but with IUserAccount is possible to set up user data
IUserAccountSearchFilter userFilter = userFactory.getUserAccountSearchFilter();
userFilter.setLogonUid("superuser", ISearchAttribute.LIKE_OPERATOR, false);
ISearchResult sr = userFactory.search(userFilter);
for (final Iterator i = new PrincipalIterator(sr); i.hasNext();) {
IUserAccount user = (IUserAccount) i.next();
Execute the same search for IRole (or IGroup if needed) get the unique id of them and use newRole(...) and addUserToRole(...) methods from IRoleFactory.
Of course you don't need search for this principals if you know uniqueness of them. Use appropriate factories to get'em all by this unique id.
All the features see in [javadocs|http://help.sap.com/javadocs/NW04S/current/se/index.html]

How to find out roles for a user

Hi Experts,
How do i find the roles that are assigned to me and for other users of BW and R3.
Thanks
Dave

hi Dave,
you can try table AGR_USERS,
UNAME for user and AGR_NAME = role(s) assigned.
or transaction SU01 to see user detail.
(normally bw developer no authorization for this).
hope this helps.
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

How to find the Data source name on linux server

Hello All,
Good Morning...
I created a rpd in my local machine and deployed on the server through Fusion middle ware.
and copied the catalog file there in the server.
While working on my local machine I have two odbc connections... one is for development and other is for production.
at the time of deployment to the server I changed the development instance to production instance throught the connection pool.
I am encountering the following error while working on the analyis....
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified. (HY000)
I think this is because of the mismatch of the datasource name in server and my local machine...could you please tell me how to find the datasource names on the server?
Thanks!

Hi Dpka-
I created two ODBC connections in my system.
one for development and another for Production.
while deploying the rpd to the server I changed the development login credentials with production login.
The problem here is I just want to know whether Iam giving the same datasource name which was presented on the server or not.
I don't have access to the server now.
Is there any way to find out the datasource names which were presented on the server with the help of admin console?
Thanks!

How to find the users who r assigned to profile sap_all through su01

how to find the users who r assigned to profile sap_all through su01

you can get into SUIM-->where used lists, check for users with profile SAP_ALL you can get a list of users who have
it. and you can get into SUIM through SU01 from user information system link.
you can execute RSUSR002 from SA38/SE38.
RSUSR002 is the report which gets you the whereused list for profiles within roles, users.
you can get it from transaction SECR ofcourse you are executing the same report.
you can get from UST04 table and obviously USR04 also because sometimes you miss some details from UST04 because of sync problems.

How to find the existing workflows

Hi Gurus,
How to find the existing workflows, and assign a user to a role.
Suitably rewarded for helpful answers.
B S B

Hi,
You can find existing workflow in Transaction PFTC.
Select Task Type as Workflow Template(WS) and either do F4 on Task
or put some description and press enter.
For assigning a user to a role, check transaction PPOCW. (If in an Org. Unit) or through SU01.
Regards,
Ashish

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find the role of a OBI user

Similar Messages

Maybe you are looking for