How to find the Source Table in one corresponding schema?

Hi All,
How to find the Source Table in one corresponding schema?
regards,
DB

DB wrote:
Hi All,
How to find the Source Table in one corresponding schema?
regards,
DBHUH?
I do not understand your question
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Similar Messages

How to find the database table behind the xtags varibles?

if in xtags we find that some varibles are not having the right data coming from xml -> database tables so how can we find out the names of database table behind it .

now how to find the database table and the column name of database table from which the value of id msds is coming
Here they have stored the name of pdf file . from this code pdf file is displayed

Hi,
Thanks for your response. It is PM related. When I run a T Code - IK18, the field Total Counter Reading field appears. I am looking for that particular fields actual table name and field name. I think I have found it in IMGR table. Now I want to get IMRG-READG in my report, but there is no common fields in neither MKPF or MSEG table. So what can I do to connect IMRG table with either of them ?

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

How to find the Source system table

Hi Experts,
How to find table name in SCM APO system, because I am getting error in process chain, the corresponding table in the source system does contain any data. check the data basis in the source system.
Please provide the solutions how to find the table in APO (DP scm bi).
Thanks in advance.
Bye,
Bharathi.

Hi
I guess you knew that in APO, apart from APO tables.. it is Livecache where the actual transaction data is stored.
But, if you just want to find some of the existing table in APO.. simply go to se11 and in the table name put the pattern as /SAPAPO/* and press F4. It will give a list of tables with the descriptions.
You can find out yourself all APO tables application wise with the following steps:
Use transaction SE11 or SE16
- Press F4 in the selection field
- You will get popup... in the below line of the popup selection SAP Applications.
Here you will get the Application list. In that select your own application for which you want to get the table details
e.g. SCM- Supply Chain Management --> SCM-APO --> Advanced Planning and Optimization --->SCM-APO-MD - Master Data --> /SAPAPO/00_PRODUCT
Here are some examples:
/SAPAPO/v_matloc - material, material number location view
/SAPAPO/TSAREAKO - Planning Area details
/SAPAPO/TSAREATE - Planning Area technial fields
Since there are thousands of tables, I cannot list them all here.
or
You can use transaction ST05 (database trace) to help you find the tables you are looking for. You can turn on the trace function, run an APO transaction, and looks at the ST05 logs for the tables

How to find the source of zfields in ECC where they are extracted to BI ?

Hi,
We have few zfields in BI datasource, and I want to know the source of these zfields in ECC from where the zfields are extracted. Is there any table either in BI or ECC where we can check the source of extraction. Please let me know the way to find the source of the table ?

Hi Daniel,
There is one scenario to know from which tables data is picking for particular data source, which may helps you.
You need to open two ECC sessions.
1. Goto RSA3 T-code (1st session)
2. Goto ST05 T-code (2nd session) which is for trace analysis.
In RSA3 give your data source name and select few records before executing , go to ST05 screen and select the "Table Buffer Trace" checkbox.
And then press "activate trace" button and after that execute your data source in RSA3 screen.
After getting result in RSA3 screen then goto ST05 and select "Deactivate trace" button and then select "Display trace" which will show the trace list from which data is fetching.In this you will be able to see the source tables.
Hope this helps you,
Thanks,
Sai Chand.S

How to find the new tables and columns in a schema

hi..good morning to all...
I have a schema ABC which owns some objects.
Now some days before I have made another schema XYZ which was a replica of ABC schema.
between these days some new tables, new columns in the existing tables(with or without default value), comments on the columns are being added in the new schema i.e XYZ schema.
Now I have to find the extra things which are present in the new schema. I need to find the new tables, new columns in hte existing tables, their default values and descriptions of those.
Can u plss help me how can I find it?
I am guessing that I have to write a SQL query with a minus clause but I am not able to write it and also dont know where should I execute it.
plss help. thanks in advance.

And moreover, when I am executing the query to get the desired result, then it is throwing "illegal use of long datatype" error and pointing to the b.data_default area of my query..
select a.table_name, a.column_name, b.data_default, a.comments from all_col_comments a, dba_tab_columns b
where a.TABLE_NAME=b.TABLE_NAME
and a.OWNER=b.OWNER
and a.OWNER=XYZ
minus
select c.table_name, c.column_name, d.data_default, c.comments from all_col_comments c, dba_tab_columns d
where c.TABLE_NAME=d.TABLE_NAME
and c.OWNER=d.OWNER
and c.OWNER='ABC'
order by 1, 2;
plss help...

How to find the source generating DNS Query

Hi team,
we are getting error message for DNS total query
Received/sec is getting more than 250 . can any one help me how i know the source where these query are generated .
DNS Total Query Received/sec is 308.11; >TH = 250
Regards, Triyambak

Note: For this to work correctly you’ll need to run this part of the process from a domain controller. In this example I’m using a 2012 R2 DC but the process should be the same for 2008 and 2008 R2, unfortunately this process doesn’t apply to 2003 DCs, for
sure you can use SPA and get similar information but the good thing is that you’ve got rid of those old 2k3 DCs right?
http://blogs.technet.com/b/askpfeplat/archive/2013/12/16/domain-and-dc-migrations-how-to-monitor-ldap-kerberos-and-ntlm-traffic-to-your-domain-controllers.aspx
You can add the DNS
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers

How to find the dates table in T.CODE:CRMD_ORDER

Hi ,
Where to find the dates at sales order header level (General tab)as well item level in Transaction code: CRMD_ORDER.
I did not see any internal table for this Dates in the FM CRM_ORDER_READ and i have tried with F1 help but is a ALV grid.
Could any one help me to find the dates table.

Hi,
The dates are populated in the table IT_APPOINTMENT of FM CRM_ORDER_READ.
if you want to populate the dates in any business order in crmd_order, then u can put a debugger in FM 'CRM_ORDER_MAINTAIN', open any business order, populate the date at header and item level and press enter.
check the table IT_APPOINMENT table and the corresponding values that need to be populated.
Hope this helps!!!
Prerna

How to find the data table sin CRM 4.0

Dear Guru's
I want to know where can i get all the data tables in crm 4.0 for example if i want to know the data table for the Reason in activity Management.with the help of data table only the ABAP people can work.....na
Points willbe given
With Best Regadrs
Sreeram Raghu

Hi Raghu,
There are many techniques in which you could find the database tables, few of them are given below:
- Place your cursor in the field for ex: reason in activity and press F1
- In F1 screen(performance assistant), Click on Technical Information (fourth button from left), you can find here the database table name.
Another Option:
- Go to transaction SE11
- In Database Table Field type few letters, for example to find all the activity table type * act * and then press F4, all the tables related to activity will be displayed
Wish this was useful to you
regards
Srikantan

How to find the source code of com.sap.caf.eu.gp.example.tiimeoff.wd.create

Hi Frendz..
I want to know how we can build a callable obj which have a two buttons those r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject).
I gone thru the Leave process(Time-Off process) which is very suitable for my requirment but in this app there r using predefined CO(com.sap.caf.eu.gp.example.tiimeoff.wd.create).How we see the source code of this predefined CO.
Thanks in Advance
Regards
Rajesh

not answered

How to find the source code of EJB?

I have download the EJB class file on the sun's site,but I wanna download java file of EJB,how to find the java file?

download a decompiler for java ...search in downlaod.com

How to read the source table using a dblink in oracle

Hi,
I want to read data from a source table which I can access using dblink in the datawarehouse. I tried different things in DI and I don't know how to do that? Can any one help me on this?
Thanks,
Gowri

Two options:
First you could create a view in the dwh database that is using that remote link: create or replace view r_source as select * from source@dblink.
Better option is to create the source system datastore - but I assume that exists already - and then go to the dwh datastore and say that there is a dblink of a given name with which the target database can read from the other database. DI then will execute a insert...select from source@dblink kind of statement whenever that is possible. In case no such full pushdown is possible and the data is going through the DI engine anyway, reading via the dblink does not make sense anyway.
https://boc.sdn.sap.com/node/5065
https://boc.sdn.sap.com/node/5814

How to find the database table for this screen field

hi in XD02
There is a scrren field customer
name1 (firt line under name)
and email id fields
i wnat to know where the data stores goes w hen user eners in this screen i mean in which table and how to find it
for kunnr name1 i suppose it goes to kna1 but how to find it?
and f or email id whre it gots which table
regards
Arora

Hi,
when you press F1 it will give the necessary information
but some times it may give the structure names also
those structures are being used by the back end module pool
programm
so every time we can get the exact information about the
data type or length
but not sure that every time we get the exact database table name
and field name
according to me, if i dont know where some field are getting stored in
database ( if the field name and table is structure )
then i will ask my functional consultant ...
thanks & regards,
Venkatesh

How to delete the source table rows once loaded in Destination Table in SSIS?

Data Base=kssdata
Tables= Userdetails having 1000 rows
Using SSIS:
Taking A
OLE DB Source----------------->OLE DB Destination
Am Taking 200 rows in Source table and loaded into Destination table once
Constraint: here once 200 rows are exported in destination table , that 200 rows are deleted in source table
repeat the task as source table all the records are loaded into Destination table
After that am taking another 200 rows in source table and loaded into Destination table

Provided you've a sequential primary key or audit timestamp (datetime/date) column in the table you can do an approach like this
1. Add a execute sql task connectng to source db with below statement
SELECT COUNT(*) FROM table
Store the result in a variable
2. Have another variable and set it to below expression
(@[User::CountVariable]/200) + (@[User::CountVariable]%200 >0? 1:0)
by setting EvaluatesExpression as true. Here CountVariable is variable created in previous step
3. Have a for loop container with below settings
InitExpression
@NewVariable = @CounterVariable
EvalExpression
@NewVariable > 0
AssignExpression
@NewVariable = @NewVariable - 1
3. Add a data flow task with OLEDB source and OLEDB Destination
4. Use source query as
SELECT TOP 200 columns...
FROM Table
ORDER BY [PK | AuditColumn]
Use PK or audit column depending which one is sequential
5. After data flow task have a execute sql task with statement as below
DELETE t
FROM (SELECT ROW_NUMBER() OVER (ORDER BY PK) AS Rn
FROM Table)t
WHERE Rn <= 200
This will make sure the 200 records gets deleted each time
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How do I find the db table in R3 corresponding to a BAPI that was imported.

Hi,
I imported BAPI_FLBOOKING_GETLIST into RFC object in my FiletoRFC scenario.I want to find out the db table corresponding to this BAPI so that I can check which data is available in that table.
Waiting for some one's help.
Thanks,
Naren

Narendar,
I can't recollect the name of the table, but i'm sure it starts with S . I don't have sys acess now, since i'm in home. Can u give a try like this . Go to SE 11 and give S* and click help , From the description of the list of table u can find it out. I'm really sorry that I cudn't able to help in this regard, If u cudn't find, please wait our friends will reply back promptly.
Best regards,
raj.

How to find the Source Table in one corresponding schema?

Similar Messages

Maybe you are looking for